Used Turret Rewinder for sale (1,955)

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card Dodpfxewz Rifo Alfswd - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: good (used), Year of construction: 2008, turning height: 1,500 mm, workpiece weight (max.): 20,000 kg, total height: 6,700 mm, total width: 6,300 mm, total length: 9,300 mm, rotary table diameter: 2,000 mm, spindle speed (max.): 200 rpm, table diameter: 2,000 mm, travel distance X-axis: 1,835 mm, travel distance Y-axis: 1,000 mm, workpiece diameter (max.): 2,400 mm, overall weight: 48,000 kg, Equipment: documentation/manual, X Stroke 1835 mm Z Stroke 1000 mm Table load 20 Ton Ram size 230 x 230 mm   Stroke crossrail 800 mm  Dodpfx Aljv R Di Ssfowd Stroke crossrail in 5 steps each 200 mm Live tools 2000 Rpm Power live tools 15 kW ATC 18 station max L = 450 mm Taper BT50 BIG PLUS Full C-Axis 360.000   Under power in AEROSPACE precision plant 2020 Table bearing replaced 2020 Ram bearing replaced 2025 new chip conveyor Max. turning Ø: 2400mm Table Ø: 2000mm ATC / revolver: 18 Speeds / ranges: 200Rpm Power: 48kW Maximum turning height:1500mm C-Axis: 360000° Length: 9300mm Width: 6300mm Height: 6700mm Weight: 48000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2012, functionality: fully functional, Center distance (mm) 450 Turning diameter (mm) 500 Turning length (mm) 300 Turning diameter (mm) 200 Bar passage (mm) 52 Spindle speed (rpm) 6000 Spindle power (kW) 15-20 Travel in X-axis (mm) 190 Travel in Z-axis (mm) 335 Rapid traverse rate (m/min) 30 Dwodpjz At Abjfx Alfod Tool positions 12 Tool holder VDI30 Number of turrets 1 Number of driven tools 12 Weight (kg) 3800 Dimensions (L×W×H) (mm) 4260 x 1710 x 1820 Spindle hours (h) 20000 Manufacturer DMG Year of manufacture 2012 Control system Siemens 840D sl with ShopTurn

Condition: new, Year of construction: 2027, NEW MACHINE TECHNICAL DATA: Working diameter 1600mm Max. workpiece height 1000mm Max. workpiece weight 6300kg Face plate diameter 1400mm Face plate rotation speed 0-200rpm Max. torque on face plate 25000Nm Performance of main drive 75kW SETTINGS: -5-fold turret or quill support -Zentral lubrication SKF/VOGEL -Version .300 - 2 step main gear -12 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm OPTIONS: -Capto tool holder system -machine housing -chip conveyor -cooling water preparation -Side support -... CONTROL: Dodpfod Ivynsx Alfewd Cycle control OTHER: Geometrical-acceptance according DIN8609

Condition: used, Year of construction: 2006, Victor V26-II CNC lathe; with C-axis; with driven tools; FANUC 21i-TB control; chuck: 10"; turning diameter: 520 mm; turning length: 1090 mm; spindle speed: 3,500 rpm; upper turret toolholder with 12 positions, 6 of which are driven; tool presetting device; chip conveyor; oil mist extraction. Dedpfx Alor E Amgjfswd

Condition: excellent (used), Year of construction: 2004, Maier ML 26 E CNC lathe TECHNICAL DATA Number of axes: 11 Spindle bore: 32 mm Path speed: 32 m/min Control: Maier Pro GE-Fanuc Guide bush: 451.001 Main spindle Clearance: 26 mm C-axis: Yes Mechanical indexing 5°: Yes Headstock stroke: 220 m Main spindle, speed: 0 - 6000 rpm Power: 3.7 kW / 5.5 kW (7.5 kW) Collet chuck: 161E Counter spindle Clearance: 26 mm C-axis: Yes Mechanical indexing 5°: Yes Max. travel (Z): 220 mm Counter spindle, speed: 0 - 6000 rpm Main spindle, power: 1.1 kW Collet chuck: 161E Cross machining Basic holder for turning rings 5 pcs. 16 x 16: Yes Number of driven tools: 4 Power of the driven tools: 0.5 kW Back machining Drive power: 0.5 kW Number of tools: 4 of which driven tools: 4 Collets: ER16 Tool turret Number of tools: 16 Number of driven tools: 8 Drive power: 0.5 kW C-axis: 360 ° Z-axis: 175 mm X-axis: 200 mm Collets: ER16 Dwsdju S Rivjpfx Alfjd SCOPE OF OFFER U.A: (list not exhaustive): Maier ML 26 E CNC lathe Oil mist separator transformer Chip conveyor High pressure pump / belt filter system Fire extinguishing system LNS bar feeder Complete operating documentation Exact scope of offer according to photo gallery No responsibility is taken for the accuracy, completeness and timeliness of the information

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, total height: 1,930 mm, total length: 6,000 mm, total width: 2,500 mm, type of input current: AC, overall weight: 3,850 kg, input voltage: 415 V, number of spindles: 1, Equipment: chip conveyor, documentation/manual, CNC Dugard Eagle 200 with multifeed bar feed, can be viewed working. Machine Type: 2 Axis CNC Lathe Control: Siemens 802D Condition: Very Good Includes Swarf Conveyor Multi feed auto bar feeder Dodo Afpvtepfx Alfswd Tool setting probe 10 x Tool Holders Manuals Technical Specification Max Part Diameter: 480mm Max Turning Diameter: 280mm Max Turning Length: 508mm Z Axis Travel: 520mm X Axis Travel: 176mm Spindle Pull Rod Diameter: 52mm Hole Through Spindle: 62mm Turret Positions: 10

Condition: like new (used), Year of construction: 2022, operating hours: 400 h, functionality: fully functional, turning length: 1,030 mm, turning diameter: 460 mm, spindle bore: 81 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 265 mm, travel distance Z-axis: 1,100 mm, Doosan Puma GT2600LM, 2022. Machine with only 400 operating hours. Excellent condition. Fanuc 0i-F Plus iHMI-Touch control with Manual Guide. Dwsdpe Aba D Hsfx Alfjd Max. turning length: 1030 mm Max. turning diameter: 460 mm Chuck: 250 mm Spindle bore: 81 mm Spindle: ASA A2-8 Max. spindle speed: 3500 rpm Motor: 18.5/22 kW 12-tool turret, BMT 55 Axis travels: -X: 265 mm -Z: 1100 mm -C: +-360° Live tooling Renishaw tool probe Tailstock Part catcher Included with the machine: - Chip conveyor with collection tank - High-pressure pump - Documentation - 4 live tooling holders (2 angular, 2 straight)

Condition: good (used), Year of construction: 2010, functionality: fully functional, FOR SALE CNC Lathe with Two Spindles and Y-Axis Mori Seiki NL2500SY/700 (year 2010) available for sale: CNC Lathe with Two Spindles and Y-Axis Mori Seiki NL2500SY/700 (2010) Dwjdpfx Alo Af A Amjfod Specifications and technical capabilities: - Machining capabilities: Max. turning diameter: 356 mm | Max. turning length: 705 mm | Bar capacity: 80 mm - Main spindle: Max. speed: 4,000 rpm | Spindle nose: A2-8 | Motor power: 26 kW - Counter spindle: Max. speed: 6,000 rpm | Spindle nose: A2-5 | Motor power: 11 kW - Turret and Y-axis: 12-position turret (all motorized, max. tool speed: 6,000 rpm) | Y-axis travel: ±50 mm Machine history and condition: - Numerical control: FANUC CNC - Identification: Manufactured in Japan in November 2010 - Certified hours: Power-on time: 16,311 h | Actual cutting time: 15,534 h | Operating time: 3,110 h - Maintenance: Machine in good condition, well-maintained and regularly serviced Equipment and accessories included: - Chip evacuation: Rear chip conveyor - Clamping: Equipped with a collet chuck - Turret tooling: Supplied with 5 drilling chucks and 2 double-sided external chucks - Important note: Sold without a drawbar, without a tailstock, and without a chip extraction system. Logistics: - Footprint dimensions: approximately 4.3 m x 2.1 m | Weight: 6,200 kg - Required power supply: 200V AC / 3-phase / 44 kVA

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 306 h, mileage: 306 km, axle configuration: 4x2, load capacity: 200 kg, mast type: telescopic, lifting height: 11,950 mm, platform length: 960 mm, platform width: 1,200 mm, overall weight: 6,750 kg, empty load weight: 6,550 kg, fuel type: electric, tire size: 600 X 190, tire condition: 100 %, drive condition: 100 %, ground clearance: 100 mm, color: red, 🚜 MANITOU 120 AETJC 2 | 2014 | ONLY 306 HOURS | 11.95 M WORKING HEIGHT | ELECTRIC ⚡ ONLY 306 HOURS | 11.95 M WORKING HEIGHT | 7.0 M HORIZONTAL REACH | 200 KG PLATFORM CAPACITY We offer a professional electric articulating boom lift, the MANITOU 120 AETJC 2, from 2014 with only 306 operating hours. It’s an excellent choice for companies looking for a compact, efficient, and reliable access platform for working at height. Designed for production halls, warehouses, logistics centres, industrial facilities, installation, maintenance, service, and assembly work. 🔋 The electric drive provides quiet operation and zero exhaust emissions, making the machine ideal for indoor use. With an overall width of only 1.20 m, it offers excellent manoeuvrability, even in confined areas. 🔧 MAIN TECHNICAL SPECIFICATIONS • Manufacturer: Manitou • Model: 120 AETJC 2 • Year: 2014 • Operating hours: ONLY 306 h • Type: self-propelled articulating boom lift • Drive: electric • Battery: 48 V / 240 Ah • Drive motors: 2 x 4.5 kW • Wheel drive: 2WD • Max. working height: 11.95 m • Max. platform height: approx. 9.95 m • Max. horizontal reach: 7.00 m • Platform capacity: 200 kg • Platform occupancy: 2 persons • Turret rotation: approx. 355 degrees • JIB rotation: +70 / -70 degrees • JIB length: approx. 1.26 m • Travel speed: up to 6 km/h • Gradeability: up to 25% • Outside turning radius: approx. 3.34 m • Wheelbase: 1.65 m • Ground clearance: approx. 100 mm 📏 DIMENSIONS AND WEIGHT • Overall width: 1.20 m • Overall length: approx. 5.48 m • Transport height: approx. 1.99 m • Platform: approx. 1.20 x 0.96 m • Operating weight: approx. 6,550 kg • Tyres: NEW solid non-marking tyres ⭐ KEY ADVANTAGES ✅ Exceptionally low usage – only 306 hours ✅ Almost 12 m working height for a wide range of applications ✅ 7 m horizontal reach for access over obstacles and installations ✅ Quiet, zero-emission electric drive ✅ 200 kg capacity for 2 operators with tools and equipment ✅ Only 1.20 m wide – excellent manoeuvrability in narrow areas ✅ Articulating boom for difficult and hard-to-reach locations ✅ NEW non-marking tyres – ideal for finished floors ✅ MANITOU quality with excellent spare parts and service availability 🏭 APPLICATIONS Dedpfx Ao Ahdvnslfswd Ideal for: • Installation work • Industrial maintenance • Electrical work • Structural assembly • Warehouse and production hall maintenance • Lighting maintenance • High bay racking systems • Renovation and finishing work • Maintenance operations in production facilities A compact and professional access platform for users requiring excellent working height, precise control, compact dimensions, and an efficient electric drive system. ✅ MANITOU 120 AETJC 2 - ONLY 306 OPERATING HOURS - READY TO WORK. 🚛 We can arrange transport throughout Poland and across Europe.

Condition: excellent (used), Year of construction: 2003, Veneer saw Langzauner LZ 5/2 - 3500, precision cutting saw with a jointing unit (planing unit) and a veneer support table. Robust machine construction by Langzauner. A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick veneer. Dwedpfxj Afznuj Alfsd Cutting length max. 3500mm. Cutting and jointing height max. 40mm. Easily guided unit, runs on two hardened, ground linear guide shafts. Rear support table with continuous finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display. The support table is very robustly constructed and runs on parallel round guides; it is slightly offset to the right so that cross-cuts can be made on the left side of the veneer packs. Angle stop on the support table and on the front support for end cuts of the veneer packs. Special equipment with rack-and-pinion compensation for the pressure bar, which prevents the pressure bar from warping. Pneumatic workpiece clamping, also holds in the center position. Drive motor saw 2.2kW, milling unit 1.1kW. The motors can be conveniently switched on at the handle and only run when needed. When switched on, the saw and milling unit are automatically engaged by compressed air; the cutting height can be selected in three positions via a turret stop. Carbide-tipped precision cutting blade, sharpened. Planer head Z4 with pull-cut, equipped with new carbide inserts and spare blades included. Practical front veneer support, which is automatically extended pneumatically when using the planing unit. Extraction connection 150mm with extraction duct. V-belt renewed. CE marking. Emergency stop cord. Operating manual. Onboard tools. Original paint, only a few spots have been touched up. The machine is in excellent condition and has clearly been used only rarely. Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg. The machine can be demonstrated on-site by appointment. We only offer machines that are in our warehouse and ready for demonstration, see "other offers from this provider".

Condition: excellent (used), Year of construction: 2022, operating hours: 4,000 h, functionality: fully functional, turning length: 900 mm, turning diameter: 500 mm, travel distance X-axis: 360 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 900 mm, rotational speed (max.): 2,800 rpm, overall weight: 8,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, CNC turning-milling center SPINNER TC 800 - 110 SMCY with main and counter spindle and Y-axis Year of manufacture: 2022 Control system: Fanuc 31i Technical data: Main spindle speed: 0 - 2,800 rpm Drive power: Main spindle torque: Counter spindle speed: 0 - 4,000 rpm Drive power: Counter spindle torque: Dwjdps Agfyzefx Alfsd Number of stations, turret: 12 Number of driven stations: 12 Tool holder: VDI 30 Travel distances: X-axis: 360 mm Y-axis: +65 / -55 mm Z-axis: 950 mm Accessories: - Short bar loader - High-pressure system 12 bar - Chip conveyor

Condition: ready for operation (used), functionality: fully functional, Pinacho S90 lathe, model V/225 x 1000mm swing, with Fagor digital readout, maximum diameter over bed 450mm, over cross slide 690mm, over carriage 215mm, spindle bore 52mm, 18 speeds, 32-1800 rpm, 5.5 hp motor, with quick-change tool turret, and various accessories. Lathe in very good condition. Dedpfo Ahrk Tex Alfowd

Condition: used, Year of construction: 2005, Technical details: max. turning diameter: 320 mm turning length: 1040 mm control: OSP E 100 L Onetouch IGF-M-D greates pass round over bed: 530 mm standard turning dia.: 350 Max. distance between centres: 1200 mm max. workpiecediameter: 525 mm Traverse X-Axis 1: 500 Traverse X-Axis 2: 350 mm Traverse Y-Axis 1: 160 (+80/-80) mm Traverse Z-Axis 1: 1200 mm Dwedpoz Ig Swjfx Alfjd Traverse Z-Axis 2: 1200 mm Spindle 1 Power: 22 kW Spindle 1 RPM: 3800 1/min spindle nose: JIS A2-8 spindle bore: 80 mm bar material dia.: 65 mm C-Axis: 0,001° Number of Turrets: 2 Turret No.1 stations / rotary tools: 12/12 Turret 1 tool RPM: 4500 1/min Turret No.2 stations / rotary tools: 12/12 rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 25 m/min total power requirement: 33 kVA weight of the machine ca.: 10 t dimensions of the machine ca.: 6,0 x 2,5x 2,3 m High pressure coolant system: INterlit 8/20 bar Accerories Chip conveyor part counter total counter tool setting Signal lamp 3 colors spindle load monitor B Spindle 1 Chuck SMW 300 mm Soper solid CNC Turning-and Milling Center The Okuma LT 300 MY has 2 turrets, the upper turret has Y-axis with milling function, the lower turret has milling function. It has main- and subspindle. This allows synchronized machining using 2 turrets with a maximum of 24 positions for rotary toolholders. A comprehensive package of toolholders comes with the machine. An Interlit paperfilter/high pressuire system with the machine with coolant cooler. There are 5 identical machines available, all in very good and well maintained condition. *

Condition: ready for operation (used), Year of construction: 1996, operating hours: 5,736 h, travel distance X-axis: 100 mm, travel distance Z-axis: 290 mm, overall weight: 2,600 kg, controller manufacturer: MAZATROL, controller model: T PLUS, number of slots in tool magazine: 8, number of axes: 2, CNC Lathe manufactured in 1996. This Mazak Quick Turn 10 features a maximum turning diameter of 160 mm and a turning length of 256 mm. It is equipped with a robust 8-station drum turret and a main spindle speed of up to 6,000 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn 10 machine we have for sale. Contact us for further details. - Model Designation: Quick Turn 10 (Nameplate: QTN-10)- Year of Construction: 1996- Control Unit: Mazak MAZATROL T PLUS- Total Operating Hours (Gesamt / Betr. Zeit): 26,800 h 00 m 35 s- Automatic Machining Hours (Aut. Zers.): 9,151 h 11 m 30 s- Automatic Cycle Time (Aut. Abla.): 9,369 h 25 m 11 s- Pure Cutting Time (Rei. Zers.): 5,736 h 15 m 38 s- Max. Turning Diameter: 160 mm- Circumferential / Swing Diameter: 300 mm- Turning Length: 256 mm (Z-travel 290 mm)- Tool Turret: 1 Turret, 8-station drum turret- Tool Clamping: Block holder, shank 20 x 20 mm- Main Spindle Speed: Up to 6,000 rpm- Spindle Nose: A2-5- Spindle Bore: 50 mm- Drive Power: 7.5 kW- Bar Capacity: Ø 42 mm (Standard chuck 6" / 165 mm)- Tailstock: None visible / to be confirmed on inspection (optional MK 4) Dodpfx Aj Agvl Tslfowd Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2001, operating hours: 90,842 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 190 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 555 mm, total height: 1,950 mm, total width: 2,220 mm, overall weight: 6,500 kg, product length (max.): 4,770 mm, number of axes: 6, This 6-axis Gildemeister MF twin 65 turn-mill centre was manufactured in 2001. It features a swing diameter of 240 mm and a normal turning diameter of 200 mm. The machine offers a spindle distance of 800 mm and a maximum spindle speed of 5000 rpm. If you are looking to get high-quality turning and milling capabilities, consider the Gildemeister MF twin 65 turn-mill centre we have for sale. Contact us for further details. TECHNICAL SPECS:- Bed Design: 45° slant bed, roller guide ways- Swing Diameter: 240 mm- Normal Turning Diameter: 200 mm- Spindle Distance: 800 mm- Slide 1 X/Z Travel (Cross/Longitudinal): 190 / 555 mm- Slide 2 X/Z Travel (Cross/Longitudinal): 190 / 555 mm- Slide 1 Y-Axis Travel : 40 mm- Spindle 2 Longitudinal Travel: 600 mm- Main Spindle 1 (Left): - Chuck Diameter: 200 mm - Max Bar Capacity: 65 mm - Spindle Head Flat Flange: 170 h5 - Spindle Bore: 79 mm - Draw Tube Inner Diameter: 66 mm - Front Bearing Diameter: 120 mm - Drive Power (40/100% ED): 28 / 21 kW - Speed Range: 25 - 5000 rpm (min⁻¹) - Knee Speed: 850 rpm (min⁻¹) - Max Torque (40/100% ED): 320 / 240 Nm - Drive Type: AC / 1 (ISM) - C-Axis Rapid Traverse: 250 rpm (min⁻¹) - C-Axis Holding Torque: 200 Nm - C-Axis Indexing Accuracy: 0.025°- Counter Spindle / Main Spindle 2 (Right): - Chuck Diameter: 200 mm - Max Bar Capacity: 42 mm - Spindle Head Flat Flange: 140 h5 - Spindle Bore: 56 mm - Draw Tube Inner Diameter: 44 mm - Front Bearing Diameter: 90 mm - Drive Power (40/100% ED): 18 / 14 kW - Speed Range: 31 - 6300 rpm (min⁻¹) - Knee Speed: 1000 rpm (min⁻¹) - Max Torque (40/100% ED): 130 / 173 Nm - Drive Type: AC / 1 (ISM) - C-Axis Rapid Traverse: 250 rpm (min⁻¹) - C-Axis Holding Torque: 120 Nm - C-Axis Indexing Accuracy: 0.025°- Slide 1 (Upper): - Rapid Traverse X/Z: 20 / 30 m/min (without Y-axis) or 20 / 7.5 / 30 m/min (X/Y/Z with Y-axis) - Feed Force X/Z: 4 / 7 kN - Path Resolution: 0.001 mm - Ball Screw Pitch x Diameter: 12x28 / 15x32 mm (without Y) or 12x28 / 5x32 / 15x32 mm (with Y)- Slide 2 (Lower): - Rapid Traverse X/Z: 20 / 30 m/min - Feed Force X/Z: 4 / 7 daN (kN) - Path Resolution: 0.001 mm - Ball Screw Pitch x Diameter: 12x28 / 15x32 mm- Slide 3 (Spindle 2 Z-Movement): - Rapid Traverse A: 30 m/min - Feed Force A: 7 kN - Path Resolution A: 0.001 mm - Ball Screw Pitch x Diameter: 15x32 mm- Tool Turrets (Upper and Lower): - Number of Tool Stations: 2 x 12 - Tool Shank Diameter (DIN 69880 / VDI): 30 mm - Driven Tool Stations: 2 x 12 - Driven Tool Power (40/100% ED): 5 kW - Driven Tool Max Torque (40/100% ED): 16 Nm - Driven Tool Speed Range: 40 - 4000 rpm (min⁻¹)- Electrical Data: - Voltage: 400 V (3-phase, 50 Hz) - Connected Load: 65 kVA - Rated Current: 95 A - Back-up Fuse: 100 A - Auxiliary Voltages: 230 V / 24 V=- Hydraulics System: - Tank Capacity: approx. 25 L - Pump Power: 2.2 kW - Max System Pressure: 80 bar - Clamping Device Pressure: 80 bar- Coolant System & Filtration: - Tank Capacity: 200 L - Pump Power: 1.65 kW - Delivery Volume at 6 bar: 50 L/min - Equipped with band/paper filtration unit- Machine Dimensions & Weight: - Total Length (with Chip Conveyor): 4770 mm - Total Depth (with Electrical Cabinet): 2220 mm - Total Height (with Electrical Cabinet): 1950 mm Technical Specification Counter Spindle Yes Driven Tools Yes Dodpfj Agvbqjx Alfjwd

Year of construction: 2026, condition: as good as new (ex-display), Features: → Robust machine housing made of cast material Dodpfec Ipckjx Alfjwd → Automatic loading and unloading of the test force → Automatic switching between objective and indenter → LED illumination → Digital measuring eyepiece → LCD color display with touchscreen → Conversion to other hardness scales (e.g. HRC/HB) → Simple operation Technical Data: → Test loads in grams (10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000) → Testing method according to Vickers (HV0.01 - HV1) → X/Y cross table 110 x 110 mm / travel range 25 x 25 mm → Eyepiece 10X → Automatic objective turret → Objectives 10X / 40X / 60X → Max. sample height 90 mm → Max. sample depth 110 mm → Compliance: DIN EN ISO 6507 / ASTM E-384 → Weight approx. 50 kg → Power supply 230V / 50Hz Scope of delivery: → Hardness testing device → Diamond indenter 136° → X/Y cross table 110 x 110 mm → Eyepiece 10X → Objective turret → Objectives 10X / 40X / 60X → LED illumination → Power cable → Accessory case → Operating manual OPTIONAL → VMS3 software (Video Measuring System) → Digital built-in measuring screw (for transmitting the edge distance to the VMS software) → "Automatic measurement" module (only in conjunction with VMS3 software) → PC system / monitor → Delivery/commissioning/calibration & training

Condition: used, Year of construction: 2023, functionality: fully functional, total height: 1,986 mm, total length: 2,025 mm, total width: 1,349 mm, IMA TABLET PRESS, MODEL PREXIMA 300 Single-sided tablet press for medium production. Flexible and efficient, its design allows for accessibility, with quick turret removal and easy cleaning. Optimal performance even with the most difficult-to-manage powders. Built in 2023. CHARACTERISTICS - Speed: 90 to 120 rpm (depending on die and tools) - Noise level: below 75 dB - For medium production output - Die type: IMA 32; D; B; BB; BBS - Tool type: IMA 32; D; B - Dimensions: 2025 x 1986 x 1349 mm PRODUCTION - Max. tablet output: 1,620 to 5,280 tablet/h (depending on die and tools) - Max. tablet diameter: 11 to 39 mm (depending on die and tools) - Max. tablet thickness: 1.5-10 to 1.5-12 mm (depending on die and tools) - Max. precompression: 100 kN - Max. compaction: 100 kN Dodj Ah Edvopfx Alfowd ENERGY CONSUMPTION - Max. installed power: 13.5 kN - Standard voltage: 400 v (+/- 10%); 50-60 Hz

Condition: used, Year of construction: 2020, operating hours: 19,485 h, spindle speed (max.): 5,000 rpm, overall weight: 10,000 kg, CNC Lathe Manufacturer: DMG MORI Model: SPRINT 65 2T Year of manufacture: 2020 Control system: Siemens 840D sl Operate Technical details: Spindle speed: 5,000 rpm Number of tool stations: 2 x 12 Machine weight: approx. 10 t Operating hours: approx. 19,485 h Spindle hours: approx. 9,037 h Condition: Used Available from March 2027 Technical features & accessories: Dedpfxo Advfxo Alfowd - 3 cross slides - 2 turrets, 12-station (driven/live tooling) - 2 C-axes - Y-axis on slide 1 - Y-axis on slide 2 - Chip conveyor - Breuning bar loader Accessories, tools, and work-holding devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: used, Year of construction: 2002, functionality: fully functional, overall weight: 2,200 kg, Equipment: documentation/manual, # TAKAMAZ SX-07 CNC lathe with FMB bar feeder – manufactured in 2002 For sale is a CNC lathe from the Japanese manufacturer TAKAMAZ, model SX-07, manufactured in 2002. The machine was fully functional until it was decommissioned and was subsequently professionally dismantled and stored. Dwjdo Ah Eitjpfx Alfod The complete system will be sold including the bar feeder magazine, chip conveyor, extraction system, and accessories. ## Technical data - Manufacturer: TAKAMAZ / Takamatsu Machinery - Model: SX-07 - Year of manufacture: 2002 - Control: FANUC Series 21i-T - Serial number: 940011 - Machine weight: 2,200 kg according to the nameplate - Tool turret - Main and counter spindle ## Operating data according to the control system - Control system switched on: 95,815 hours - Feed time: 23,599 hours - Total part counter: 8,324,144 pieces ## Equipment - FMB Turbo 3-26 bar feeder magazine (year of manufacture unknown) - Chip conveyor - Extraction system - Various tool holders and accessories as shown in the pictures - Operating manual available ## Condition and inspection The machine was fully functional until it was dismantled. It has already been dismantled and stored, but can be powered up for inspection. A complete machining demonstration cannot be guaranteed in the stored condition. Inspection is possible after prior appointment. Sale from warehouse. Loading and transport by arrangement.

Condition: used, Year of construction: 1982, type of closures: 28 x 15 working direction: rotating turret Dwsdpfxj Ahldho Alfjd

Condition: good (used), operating hours: 98 h, fuel type: electric, General information Year of manufacture: 2017 Year of construction: 2017 Drivetrain Drive: Wheel Weights GVW: 6.550 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 1.200 cm CE mark: yes Condition Technical condition: good Visual appearance: average Manitou 120 AETJ-C 3D – 2017 – only 98 hours Manitou 120 AETJ-C 3D electric articulated boom lift, manufactured in 2017, with only 98 operating hours! This compact and versatile electric boom lift offers excellent manoeuvrability and is ideal for a wide range of installation, maintenance and assembly work at height. With a maximum working height of 11.95 metres and a horizontal outreach of 7 metres, this machine provides excellent working capabilities. The 3D articulated jib makes this model particularly versatile. The jib can move both vertically and sideways, allowing the operator to position the platform precisely and easily reach around obstacles. With a platform height of 9.95 metres, a platform capacity of 200 kg and a compact overall width of just 1.20 metres, this machine is suitable for a wide range of applications. Its electric drive and non-marking tyres also make it ideal for use in warehouses, industrial buildings and other indoor environments. Djdpo Ah Eqtefx Alfswd Technical specifications: Make: Manitou Model: 120 AETJ-C 3D Year: 2017 Operating hours: only 98 hours Drive: Electric Maximum working height: 11.95 metres Platform height: 9.95 metres Horizontal outreach: 7.00 metres Up-and-over height: 4.77 metres Platform capacity: 200 kg 3D articulated jib with lateral rotation Jib movement: +70° / -70° Platform rotation: 140° Turret rotation: 360° Overall width: 1.20 metres Non-marking tyres A particularly interesting machine with an exceptionally low operating time of only 98 hours. An excellent choice for anyone looking for a compact electric boom lift with outstanding reach and the added versatility of a 3D jib. Contact us today for more information or to arrange a viewing!

Year of construction: 2008, condition: used, Equipment: workpiece handling system, sub-spindle, live tooling on both turrets, two turrets, the upper turret is equipped with an additional milling spindle. Rated current: 119A, max. upstream fuse rating: 125A, control voltage: 24V DC, connected load: 70kW, control system: Siemens 800D, operating hours: 92,329h, a machine retrofit is required before the machine can be put back into operation. An on-site inspection is possible. Dwsdpo Ah Tx Tjfx Alfed

Year of construction: 2008, condition: used, Offered is a CNC turning center with automated robot loading. Workpiece feeding: Ball blanks under 120mm via rod chute, larger ball blanks via a separate singulation system at the CNC machine. Operating hours: approx. 68000h. Control system: FANUC 31i-A. Robot controller: FANUC R-30iA. Equipped with: Main spindle and counter spindle, tool turret, FANUC M-16iB 6-axis industrial robot, automated workpiece feeding, raw part hopper, rod chute for ball blanks under 120mm, separate workpiece singulation system for larger ball blanks, chip conveyor, protective enclosure for the robot cell as well as electrical documentation and circuit diagrams. Repairs carried out: 2025: New feed screw with bearing, 2021: New vacuum pump on the cooling unit, 2018: New CPU for the FANUC robot. Inspection possible by arrangement. Dsdpfx Alj Agwrmefewd

Condition: good (used), Year of construction: 2011, workpiece weight (max.): 20 kg, turning diameter: 250 mm, torque: 256 Nm, power: 45 kW (61.18 HP), CNC vertical turning lathe Manufacturer: EMAG Type: VTC 250 Year of manufacture: 2011 / 2012 Control: Siemens 840D sl Technical data: Max. turning diameter: 250 mm Max. turning length: 630 / 730 mm Max. swing diameter: 140 / 260 mm Dwodpfx Ae Agr Dyslfjd Main spindle: Max. speed: 3,500 / 4,000 rpm Max. torque: 256 Nm Spindle bore: 50 / 52 mm Chuck diameter: 250 mm Tool turret: Number of turrets: 2 Max. tool weight: 10 kg Max. tool length: 90 mm Max. workpiece weight: 20 kg Feeds: Rapid traverse (x / z): 40 / 30 m/min Total power requirement: 45 kW Machine weight: approx. 14 / 16 tons There are 2 units manufactured in 2011 and 1 unit manufactured in 2012 available. Technical features & accessories: - Year of manufacture 2011: Number of bed and cross slides: 2 - Year of manufacture 2012: Number of bed and cross slides: 1 - Tool monitoring - Protective guard - Collision monitoring - In-process quality control - Central coolant supply (not included) - Chip conveyor Price per machine. Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is noted in the additional information.