Single-Column Vertical Turning Lathe

DOERRIES CTE 100

Condition: excellent (used), Year of construction: 2007, Manufacturer: DECKEL MAHO Model: DMU 50 Year of manufacture: 2007 Machine type: Vertical machining center Application area: Milling Location: Germany Condition: As is, where is Podez An S Repfx Angjgu Control system: Heidenhain ITNC 530 Number of axes: 5 Travel of X-axis: 500 mm Travel of Y-axis: 450 mm Travel of Z-axis: 400 mm Main spindle speed: 10,000 rpm Spindle speed range: 20 – 10,000 rpm (variable) Tool changer: Chain magazine with double gripper Tool magazine capacity: 30 tool positions Max. tool diameter: 80 – 130 mm (depending on speed) Max. tool length: 290 mm Max. tool weight: 6 kg Table type: Digital swivel-rotary table Table dimensions: Ø 630 mm x 500 mm Max. table load: 200 kg Swivel range of the table: -5° to +110° (total 115°) Drive power: 9 kW (100 %) / 13 kW (40 % duty cycle) Torque: 82 Nm (40 % duty cycle) Measuring system: Direct linear measuring system Input resolution: 0.01 mm Positioning tolerance: 0.010 mm Rapid traverse: 24 m/min Feed rate: 20 m/min Coolant tank capacity: 80 l Electrical connection / Power consumption: 17 kVA Maximum current: 28 A Fuse / Network protection: 35 A Voltage: 400 V / 230 V / 24 V Frequency: 50 Hz Installation dimensions (L x W x H): 4,860 mm x 4,350 mm x 2,424 mm Transport dimensions (L x W x H): 2,210 mm x 2,120 mm x 2,150 mm Transport weight: 4,050 kg Manufacturer: DECKEL MAHO — Model: DMU 50 (2007). Machine type: Vertical machining center for milling applications. Condition: As is, where is. Control system: Heidenhain ITNC 530. Number of axes: 5. Axis travels and table: X = 500 mm, Y = 450 mm, Z = 400 mm. The machine is equipped with a digital swivel table (Ø630 mm x 500 mm) with a maximum table load of 200 kg and a swivel range of -5° to +110° (total 115°). Spindle and tools: Main spindle speed up to 10,000 rpm with a variable speed range of 20–10,000 rpm. Tool changer: Chain magazine with double gripper; tool magazine capacity 30 positions. Max. tool diameter depending on speed (80–130 mm), max. tool length 290 mm, max. tool weight 6 kg. Drive and accuracy: Drive power 9 kW (100%) and 13 kW (40% duty cycle), torque 82 Nm (40% duty cycle). Measuring system: direct linear measuring system. Input resolution 0.01 mm and positioning tolerance 0.010 mm. Feed and auxiliary systems: Rapid traverse 24 m/min and feed rate 20 m/min. Coolant tank capacity 80 L. Electrical and transport: Electrical connection / power consumption 17 kVA; Maximum current 28 A; Fuse/protection 35 A; Voltages 400 V / 230 V / 24 V at 50 Hz. Installation dimensions: 4,860 mm x 4,350 mm x 2,424 mm. Transport dimensions: 2,210 mm x 2,120 mm x 2,150 mm. Transport weight: 4,050 kg.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, turning diameter over cross slide: 390 mm, turning length: 550 mm, turning diameter: 350 mm, spindle bore: 90 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 5 rpm, travel distance X-axis: 240 mm, travel distance Z-axis: 580 mm, spindle motor power: 18,500 W, total height: 1,755 mm, total length: 3,130 mm, total width: 1,643 mm, feed rate X-axis: 24 m/min, feed rate Z-axis: 30 m/min, type of input current: AC, overall weight: 4,800 kg, swing diameter over bed slide: 550 mm, chuck outer diameter: 203 mm, center width: 668 mm, center height over cross slide: 315 mm, spindle nose: A2-6, bar diameter (max.): 76 mm, controller manufacturer: Fanuc, controller model: Fanuc 21i-TB, Doosan Puma 240C (2012 Model) Heavy-Duty Boxway CNC Lathe Short Overview Available for sale is a production-ready 2012 Doosan Puma 240C CNC Lathe. This machine is a highly reliable shop workhorse featuring a solid, single-piece cast iron bed with traditional box guideways for heavy-duty cutting and superior vibration dampening. Equipped with the factory "C" Big-Bore package, this lathe pairs a large 8-inch chuck capability with a 3-inch through-hole bar capacity, making it an ideal choice for high-mix job shops and mid-sized turning applications. Key Selling Points for Buyers Compact Footprint: Delivers heavy-duty boxway rigidity without taking up excessive floor space. Big-Bore Throughput: Handles up to 3-inch bar stock, matching the material capacities of much larger machine classes. Pgedpfjzluq Ejx Angju Box Guideway Precision: Offers exceptional tool life and dampening for aggressive roughing cuts on tough alloys.

Condition: good (used), Year of construction: 1999, All additional equipement from pictures will come. Technical details shown on picture. Pedpfeww Irijx Angogu

Condition: good (used), Year of construction: 2009, Control: Heidenhain iTNC 530 Podpey R N Ilefx Angogu Spindle * Diameter: 180 mm * Taper: ISO 50 * Power: 51 kW * Speed: 2,000 rpm (2-speed gearbox) * Torque: 2,668 Nm * Spindle support: 550 mm * Internal high-pressure coolant Travel distances * X: 5,000 mm * Y: 3,500 mm * Z: 2,350 mm * W: 1,000 mm (quill permanently extended 200 mm, at maximum travel – total reach 1,200 mm) Table * Size: 2,000 × 2,500 mm * Load capacity: 28 tons * Hydrostatically supported * B-axis positioning: 0.001° (double pinion, backlash-free) Other features * Tool changer: 60 positions * Siemens axis and spindle motors * Linear scales on all axes + rotary encoder on rotary axis * Handwheel HR 410 * Chip conveyor

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 7213, Country of manufacture: Switzerland Net weight: approx. 2550 kg Customs tariff number: 8458.11 20 Dimensions: 2000 x 1260 x 1950 mm TECHNICAL CHARACTERISTICS 10-axis machine – standard version 10 axes, 6 spindles: Axes and spindle designation: - 1 sliding headstock: Z1, S1 - 2 independent vertical gangs: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent rotating sub-operation axis: X4, S5 Bar feeder position: right of the operator Machine axis height: 1100 mm Pgjdpfx Anew T Tcwjgju Main spindle travel: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. workpiece length: Guide bush machining: 180 mm Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bush: fixed / rotating Collet for guide bush, type: Meister 605 Number of lateral tool stations, combined: Fixed: 2 x 5 Rotating: 3 + 3 Number of frontal tool stations, combined: Fixed: 4 Rotating: 3 Number of rear tool stations, combined: Fixed: 3 + 3 Rotating: 3 + 3 Tool section: 12 x 12 mm Standard revolving toolholder: ESX 20 Bar feeder: yes Part catcher: yes All technical details are provided without guarantee and subject to errors or omissions.

Condition: good (used), total height: 2,500 mm, total length: 5,300 mm, total width: 2,500 mm, feed length X-axis: 1,550 mm, feed length Y-axis: 600 mm, grinding height: 800 mm, overall weight: 7,800 kg, GER RS 15/60 grinding machine Table 1500 x 600 mm X-axis travel 1550 mm Y-axis travel 600 mm Pjdpfx Ajvli H Songogu Maximum grinding height 800 mm Wheel size 400 x 100 mm Automatic infeed Yes Dovetail accessory Yes Cooling system Yes Machine dimensions (width x length x height) 2500 x 5300 x 2500 Weight 7800 kg

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. Psdsthuzpspfx Angsgu good condition

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 25.4 [mm] - Max. machining length : 200 [mm] - Spindle speeds : 10000 [rpm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] - Number of guide bush holders : 2 GUIDE BUSH HOLDER 1 - Number of positions : 5 GUIDE BUSH HOLDER 2 Pgedpfx Asuhaycongou - Number of positions : 5 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] SECONDARY OPERATION - Number of positions : 7 - Number of motorized positions : 3 - Live tools speed : 8000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 14 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2270 x 1650 [mm] - Machine height : 2200 [mm] - Machine weight : 3500 [kg] MACHINE HOURS - Number of hours under power : 46571 [h] EQUIPMENT - CNC : Fanuc - Rotating tool motor on : S2 - Rotating guide bush - Parts catcher - Ejection of workpiece - Chips conveyor : KNOLL - Coolant tank * with high-pressure pump : 100 [bars] - Bar loader : TORNOS ROBOBAR SSF - Oil mist extractor : Elbaron - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Year of construction: 2020, condition: as good as new (ex-display), electrode diameter 0,5 to 3mm travels 300x400x350mm ) CE-cretification verifies the best possible safty all Machines in over-floor construction Elektrode Ø 0,5-3mm Travel X-Axis 300mm Travel Y-Axis 400mm Travel Z-Axis 350mm Travel W-Axis 300mm Speed W Axis 30-60mm/min Pgodpfxof Hmn Aj Angou Rapid feed Z-Axis 120mm/min removal rate (max.) 300:1 Table dimension 320x440mm max.generator capacity 30A

Condition: excellent (used), Year of construction: 2020, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,500 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 40,000 m/min, total width: 5,800 mm, total height: 4,500 mm, total length: 13,500 mm, table length: 10,000 mm, table width: 1,250 mm, Travelling Column High performance, precision and machining power Linear guiding of RAM combined with Hydrostatic Guiding HDS ACD2 Milling head with 5000 Rpm and 1400 Nm torq Aitek ATC chain 60 position with L=400 and 250 diameter x 35 Kg Filtration with IKZ 15 Bar Chip conveyor BLUM 3D Measuring probe Wide bed linear guided in X-Travel W=930 mm Pedpfjyr Dmdsx Angegu Rotary table driver prepared in E-Cabinet X-Axis: 8000mm Y-Axis: 1300mm Z-Axis: 2500mm Table Length: 10000mm Table Width: 1250mm Power on spindle: 40kW Spindle speeds: 5000Rpm Spindle Taper: 40ISO/Bt/Mk Feed rate X-Axis: 35000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Millinghead auto-index:0.001 x 0.001 Gr° Working hours: 3800H Length: 13500mm Width: 5800mm Height: 4500mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!