Used Turret Rewinder for sale (1,955)

Condition: used, Year of construction: 1992, In- and outlet on the right side set to 28 MCA 6 heads Dedpfe Ahlhzox Alfowd Capacity: about 10.000 bph amount of capping heads: 6 capacity / hour ca.: 10000 working direction: rotating turret Drive: Treibriemen / variabel

Condition: good (used), Year of construction: 2007, - Speed range: [rpm]: 6,000 - Torque: [Nm]: 480 - Max. turning diameter over bed: 290 mm - Chuck diameter: 200 mm - Turret: 12-position, VDI 40, Sauter - Driven tools: 7.8 kW - Travel: Dwsdpfs Ahxrdjx Alfsd - X-axis: 550 mm - Z-axis: 200 mm - Rapid traverse (X/Z) [m/min]: 30 / 20 - Feed (X/Z): [m/min.] 11 kN - Features: - Left-hand chip conveyor; 300 mm wide; ejection height 800 mm - Probe; direct linear measuring system; glass scales on all axes - Heidenhain circulating pickup tape - Machine with feed belt for part loading - Specification: - Overhauled in 2007 for approx. €50,000, complete headstock replaced. - Feed unit exchanged.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, overall weight: 6,500 kg, CNC MSX 501 MAPPS II Opposed-spindle machine. Spindle size A2-6, twin spindles. 2 stacked turrets. 9-axis controlled turning and milling center. 2 turrets. Y-axis upper turret. 2 C-axes. Bar capacity: 65 mm. T wo integrated 15 kW motors. Tool life management and tool wear monitoring. Mapps 4 conversational automatic programming system. Automatic force control and tool wear monitoring. Oil cooler for both spindles. 340 Nm cutting torque. Dedpo Ahkb Dofx Alfowd 15-position turret, all positions motorized. Automatic workpiece collector. Bar loader LNS SPRINT S3 Interface for bar loader installation. Rear automatic part pick-up with a special gripper for long parts. Max. turning diameter: 320 mm. Turning length: 810 mm. Max. distance between main spindle and counter spindle: 920 mm. Main spindle speed: 5000 rpm. Counter spindle speed: 5000 rpm. X1 travel: 210 mm. Y1 travel: +50 / -50 mm. X2 travel: 210 mm. Counter-spindle travel: 920 mm. Number of powered tool stations: 2 x 15. Capable of holding 30 tools per turret. Large selection of external and internal tool holders. Large selection of axial and radial motorized blocks. Speed range of powered tools: 5.000 rpm. Drive motor for powered tools: 5.5 kW. Rapid traverse X1, X2: 25.000 mm/min. Rapid traverse Y1: 20.000 mm/min. Rapid traverse Z1, Z2: 30.000 mm/min. C-axis resolution: 0.001°. Collet chuck on main spindle. Self centering chuck on counter spindle External and internal tool holders. Motorized axial and radial blocks. Communication ports via USB, PCMCIA card, and RS-232. Rear chip conveyor. Power transformer, documentation, parts list, electrical schematics, programming, and operating manual. Machine in very good condition. Machine weight 6.5 tons. Machine available for inspection while in operation.

Condition: used, A complete paper production line with a shoe press is offered for the production of kraft top liner, testliner and fluting. Working width, trimmed: 2500mm. Stated production capacity: 300t/day. Speed: 650-700m/min, differing figures in the documentation. Basis weight: 115-240g/m², according to the summary document 90-240g/m². Dry content after the press: 50%. DC sectional drive. Equipment: approach flow system, two stainless steel headboxes with two Fourdrinier wires, two compact presses, shoe press, 29 pre-dryer cylinders, size press, 14 after-dryer cylinders, closed hood, Voith Pope reel, Jagenberg Vari Flex S slitter rewinder, vacuum pumps, starch preparation and broke pulper. Modernizations through 2023 are documented. Technical documentation and spare parts lists are available. An inspection is possible by arrangement. Dwjdj Ahy S Dopfx Alfsd

Condition: good (used), Year of construction: 2009, functionality: fully functional, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Dodpfx Als Afg Tcefowd Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turrets: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. diameter of main spindle chuck: 175 mm - Minimum C-axis resolution: 0.001 degrees SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001 degrees - Travel: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle since 04/26 ACCESSORIES - 3-color status signal lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts extraction - Parts belt conveyor

Condition: used, Year of construction: 2000, Overview GAI 5003A rinser-filler-corker monoblock built in 2000 for still wine in glass bottles. Rinser, gravity filler and corker are mounted on one frame inside a full guarding enclosure, rated at 5,000 bottles per hour for Burgundy and Bordeaux bottles. The sale includes an Etiquetadoras Jornet PR0504 self-adhesive labeller (2008) with three labelling stations. Technical data - Manufacturer: GAI - Model: 5003A - Year of manufacture: 2000 - Output: 5,000 bottles/h; speed range 1,200 - 6,000 bottles/h depending on format; max. 3,750 L/h - Rinser: 20 grippers - Filler: 20 gravity filling valves, vacuum pump on board - Corker: 4-head turret for cork stoppers, with its own vacuum pump - Bottles: Burgundy and Bordeaux; diameter 60 - 115 mm, height 200 - 400 mm - Power supply: 380 V, 50 Hz, 3 phases + N, 24 V control voltage - Installed power: 7.15 kW, 17 A, IP55 - Dimensions: approx. 4,050 x 1,690 x 2,270 - 2,550 mm (L x W x H) - Conveyor height: 970 - 1,100 mm - Weight: approx. 5,900 kg - CE marked, CE declaration of conformity available Scope of Delivery - Rinser-filler-corker monoblock | GAI | 5003A | 20 grippers, 20 filling valves, 4 corking heads | 2000 - Self-adhesive labeller | Etiquetadoras Jornet | PR0504 | 3 stations (front, back, strip label), thermal printer | 2008 Equipment Djds Afltnspfx Alfjwd - GAI control cabinet with operator keypad and display, emergency stop - Electronic speed adjustment from the control panel - Cork hopper feeding the corking turret - Infeed screw and star wheels - Filter units and pressure regulators with gauges - Operating and maintenance manuals for both machines Condition Used machines, installed in a winery. Inspection on site is possible on request. Availability Available from end of January 2027. Location: Spain.

Condition: excellent (used), Year of construction: 2020, 2020 Haas ST-25 CNC Slant Bed Lathe & Tooling Package Haas Autogrip 3H-H12 Ø250mm 3 Jaw Power Chuck. Maximum Swing Ø806mm. Maximum Swing Over Cross Slide Ø527mm. Maximum Cutting (Varies With Turret) Ø381mm. Bar Capacity Ø76mm. Axis Traverses 'X'=236mm, 'Z'=527mm. Rapid Traverses 'X'=24m/min, 'Z'=24m/min. Spindle Bore Ø117.3mm. Maximum Spindle Speed 3,400rpm (22.4kW Motor). Spindle Nose A2-6. 12 Station Turret. Power On Hours 1,979. S/No. 3119435 (2020). Dedpfx Aloz Rqmrsfewd With Coolant System (Tank Capacity 208L), Marposs Tool Setting Arm, Tailstock, Footswitches, Signal Tower, Tooling Package (Turning Tools, Jaws, Collets & coolant Fixings) & Manual. Machine Foot Print W3,630 x D2,290 x H2,340mm. Weight 4,536kg.

Condition: used, Year of construction: 2012, turning diameter 465 mm axis distance 1.150 mm control Siemens 840D centre height 360 mm Swivel range via X-slide 465 mm chuck diameter 250 mm travel -x axis 300 mm Dods Afztwjpfx Alfewd travel -z axis 1.050 mm rapid power traverse in X-and Z direction 30 m/min Max. workpiece weight – chuck 150 kg Max. workpiece weight – tailstock 350 kg Max. workpiece weight – steady and tailstock 600 kg weight of the machine ca. 7,5 t dimensions of the machine ca. 2,5 x 5,3 x 2,2 m Equipment/Accessories: - 12-station tool turret (VDI 40 mount) - With 6 driven tool stations (VDI 40 coupling) - Hinged chip conveyor - Reinforced coolant pump (12 bar) - Hydraulic 3-jaw chuck (D 315 mm)

Condition: good (used), Year of construction: 2006, functionality: fully functional, Siemens 840D control unit, 8-position turret, VDI30 tool holder, tailstock, jaw chuck, extensive accessories. Dodpfx Ae Agbx Solfjwd

Condition: ready for operation (used), Year of construction: 2000, operating hours: 89,307 h, functionality: fully functional, machine/vehicle number: 01180001051, For sale is a powerful and reliable Gildemeister CTX 500E CNC universal lathe in good condition. Thanks to its stable inclined bed design, the machine offers maximum rigidity and excellent precision when machining medium to large workpieces. The machine can be inspected while powered on, by arrangement. Equipment: - Heidenhain control - Single spindle - Three-jaw chuck - 11-position tool turret (partially with driven tools) - Automatic tailstock - Chip conveyor Accessories: - Workbench (4 drawers, 1 door) - Telescopic drawer cabinet Contents: Hand tools, analog/digital measuring instruments Attractive offer – flexible & hassle-free We offer you not only a high-quality product, but also tailored financing options that adapt to your needs. Whether it's a down payment, installment payment, or individual financing models – together we will find the right solution. If desired, we will also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process, so you don't have to worry about anything. 📞 Please contact us for further information or a non-binding offer. We will advise you personally and competently. Dsdpfxj Afph Nj Alfowd Subject to prior sale, changes and errors!

Condition: good (used), Year of construction: 1998, operating hours: 95,843 h, functionality: fully functional, machine/vehicle number: 313369, For sale is an extremely robust and precise Gildemeister CTX 400E universal lathe, manufactured in 1998. This machine comes from a factory liquidation and is characterized by its high durability and solid construction. It is ideally suited for precise single-piece and series production. The machine is fully functional and can be inspected while powered on. Equipment: - 3-jaw chuck - 11-position tool turret (some powered tools) - Automatic tailstock - Control panel, Heidenhain CNC Pilot control system - Chip conveyor Accessories: - Workbench (5 drawers, 1 door) with partition Contents: Hand tools Dodpfxs Afpmxj Alfjwd Attractive offer – flexible & worry-free We offer you not only a high-quality product but also tailored financing options that adapt to your needs. Whether it’s a down payment, installment payments, or individual financing models – together we will find the right solution. Upon request, we will also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process, so you don't have to worry about anything. 📞 Please contact us for more information or a non-binding offer. We will advise you personally and competently. Subject to prior sale, changes, and errors!

Condition: good (used), Technical specifications: * Over bed – 270 mm * Center height – 125 mm * Maximum distance between centers – 500 mm * Spindle bore – 28 mm * Collet type B32 * Longitudinal travel of the carriage – 440 mm * Cross travel – 130 mm * Travel of the small tool-holding carriage – 90 mm * Travel of the tailstock sleeve – 100 mm Dodpfxo Afu Ine Alfswd Equipment: * 3-jaw chuck, 125 mm diameter * Multifix A turret * 3 Multifix A tool holders * Quick-change tool system * 1 steady rest * 1 rear carriage

Condition: not inspected (used), Year of construction: 2015, functionality: unexamined, machine/vehicle number: 150436, turning length: 1,000 mm, total length: 3,200 mm, total width: 1,200 mm, total height: 1,900 mm, overall weight: 3,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 828 D, PINACHO ST-225 Lathe Dsdj Afup Sopfx Alfewd - Center height above bed: approx. 260 mm - Swing over bed: approx. 520 mm - Center height above carriage: 180 mm - Swing over carriage: approx. 360 mm The machine is equipped with a tailstock and an 8-position tool turret, tool holder: VDI 30, including a 3-jaw chuck, diameter: 200 mm FCA D-94227 Zwiesel - loaded onto a truck.

Condition: excellent (used), Year of construction: 2000, CNC Lathe MAZAK SUPER QUICK TURN 200 Year of manufacture: 2000 Working area: Max. swing diameter: 525 mm Max. turning diameter: 350 mm Max. turning length: 514 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 5,000 rpm Main drive power: 18.5 kW Constant torque: 333 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Turret: Standard version: 12 stations Travel: Turret travel: X-axis: 190 mm Z-axis: 535 mm Dwsdpfx Alexvb E Defod

Condition: good (used), Year of construction: 1997, - Control system: SIEMENS SINUMERIK 840-C - Max. bar diameter: 65 mm - C-axis - Main spindle speed: 31 - 6,300 rpm - Turret 1: 8 stations, 4 of which are powered - Turret 2: 8 stations, 4 of which are powered - Speed of powered tool: 4,000 rpm - Both turrets with internal cooling - Chip conveyor - Bar feeder IRCO SiMag 65 - Max. bar length: 3200 mm Dimensions L x W x H: - Machine: 3400 x 1700 x 1800 mm - Bar feeder: 4000 x 1000 x 1400 mm - Chip conveyor: 3000 x 1100 x 1600 mm Total weight: approx. 6,000 kg Dodpfszxhmaex Alfswd

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning diameter: 145 mm, CNC turning machine Gildemeister Twin 42 Year of manufacture: 2004 Control system: Siemens 840D Powerline Turning diameter: 145 mm Max. bar diameter: 45 mm Spindle head: Flat flange 120 h5 Chuck: 130 / 140 mm Main spindle speed: 20–7,000 min⁻¹ Main spindle power: 28 / 22 kW (40/100 % duty cycle) Main spindle torque: 180 / 140 Nm Counter spindle: Yes, same power X-axis: 220 mm Z-axis: 320 mm Y-axis: ±30 mm Rapid traverse X/Y/Z: 30 / 15 / 30 m/min Turret: 2 × 12 stations Tool holder: VDI 25 Machine weight: approx. 5,300 kg Connected power: approx. 40 kVA Design: 60° inclined bed, linear guides Chip conveyor, Bürener type SPE 63/30-250 Z60 Tool monitoring system, Artis type CTM Tailstock mounted on counter spindle slide, tailstock stroke = 230 mm Tailstock force = 300 daN Dwodpfxo Af I D Us Alfjd Center bore MK3 Overload clutch for the X and Z axes of slides 1 and 2 Package for bar machining consisting of: Workpiece extraction device Workpieces can be automatically unloaded from both the main and counter spindles Workpiece dimensions: Ø6 – Ø65 mm, length approx. 300 mm, max. weight 3.5 kg Collet chuck for quick-change tool holders, size 42 Hainbuch Spanntop Connection for bar feed Bar loader magazine, IRCO type SiMag 42

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Gurutzpe CNC lathe, model AT 600-Plus x 2000mm, equipped with Siemens CNC, featuring a Sauter automatic tool turret with 4 positions, a 105mm through-hole, a longitudinal feed rate of 10,000mm for the Z-axis, a transverse feed rate of 8,000mm for the X-axis, a 40Kw motor, 380V power supply, a bed width of 630mm between guides, a Morse taper of 5, a tailstock spindle diameter of 140mm, a main carriage length of 795, a transverse carriage width of 375, and a turning diameter over the bed of 1200mm. Accessories include a 3-jaw universal chuck with a 500mm diameter, a 4-jaw independent chuck with a 1000mm diameter, a fixed steady rest, and a traveling steady rest. It also has a chip extractor. The lathe is in very good condition. Dwodpfs Ahrhxox Alfed

Condition: like new (used), Year of construction: 2019, operating hours: 2,000 h, DOOSAN PUMA GT 2100 B LATHE YEAR OF FIRST INSTALLATION: 2019 CHUCK DIAMETER: 250 mm SWING OVER BED: 600 mm SWING OVER CROSS SLIDE: 390 mm RECOMMENDED TURNING DIAMETER: 255 mm MAXIMUM TURNING DIAMETER: 390 mm MAXIMUM TURNING LENGTH: 550 mm Dwodpfx Alezak Dxofjd BAR WORK DIAMETER: 81 mm SPINDLE SPEED: 3,500 RPM SPINDLE NOSE: ASA 8 TURRET: 10 POSITIONS TRAVELS: X: 230 mm Z: 580 mm WEIGHT: 3,600 kg

Condition: used, Year of construction: 2007, Technical Specifications: Printing process: Wet offset Number of printing units: 8 Maximum printing width: 736 mm Maximum paper width: 740 mm Minimum paper width: 300 mm Maximum unwinding/rewinding roll diameter: 1,270 mm Maximum mechanical speed: 365 m/min (1,200 ft/min) Maximum printing speed: Depending on the installed equipment and operating conditions Paper weight: Approx. 40–250 g/m² Electrical supply: 400 V, 50 Hz, 3-phase Web tension control: Integrated Web guiding: Ultrasonic edge control Main machine control: Touchscreen-based control system Available Printing Cylinder Repeat Lengths: 520 mm, 524 mm, 540 mm, 544 mm, 550 mm, 558 mm, 570 mm, 580 mm, 602 mm, 607 mm, 636 mm, 639 mm, 645 mm and 680 mm. Printing Units: • 8 wet-offset printing units • Variable-format offset printing system • Plate cylinders with format-dependent configuration • Rubber blanket cylinders • Servo-driven individual printing units • Motorized adjustments • Automatic register control • Ink supply and ink level monitoring • Dampening systems with ceramic rollers • Integrated temperature control • Automatic washing systems Unwinding and Web Handling: • Unwinding unit for rolls up to 1,270 mm diameter • Pneumatic reel-loading system • Automatic web tension regulation Dodpfxe Aht Dgs Alfowd • Ultrasonic web edge guiding • Web cleaning system • Web transport and guiding rollers Drying and Cooling: • UV curing system with UV lamps • UV drying stations integrated into the printing line • Cooling units for the printing units • Chill-roll cooling system • Temperature-controlled inking and dampening components Additional Equipment: • Flexographic printing/coating unit • Anilox roller system • Doctor blade chamber • Variable-format flexographic unit • Web inspection system • BST video web monitoring • Barcode analysis software • Print defect detection software • Automatic register control • Integrated operator control panel Machine Configuration: • 8-color web offset printing press with additional flexographic printing/coating capability, UV curing, web inspection, and automatic register control. • Suitable for printing on paper substrates within the specified material range.

Condition: excellent (used), Year of construction: 2021, operating hours: 7,679 h, functionality: fully functional, machine/vehicle number: 1265, turning length: 650 mm, turning diameter over cross slide: 250 mm, turning diameter: 250 mm, spindle speed (min.): 4,500 rpm, spindle speed (max.): 4,500 rpm, spindle bore: 65 mm, travel distance X-axis: 275 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 700 mm, rotational speed (max.): 4,500 rpm, rotational speed (min.): 4,500 rpm, type of input current: three-phase, torque: 325 Nm, bar passage: 65 mm, workpiece weight (max.): 250 kg, total height: 2,130 mm, total length: 2,800 mm, total width: 1,750 mm, overall weight: 4,200 kg, Equipment: documentation/manual, Very good lathe in TOP condition! Spinner TC600-65-SMCY Year of manufacture: 2021 Serial number: 1265 Siemens Shopturn control Bar feeder, 1.5 meters long, up to Ø80, including spindle reducers made of plastic Conveyor belt Parts collector Y-axis C-axis High pressure, 15 bar 16-station turret, all powered Only 7,679 operating hours!!!! Includes turning tool holder Dwodpfx Alo Ahyllofod Includes powered holders Coolant mist extraction system Currently decommissioned but still connected to power. For sale to companies only, no private sales!

Condition: ready for operation (used), Year of construction: 1990, functionality: limited functionality, turning length: 600 mm, spindle speed (min.): 4,000 rpm, spindle bore: 65 mm, type of input current: three-phase, total height: 270 mm, total length: 5,000 mm, total width: 220 mm, overall weight: 4,000 kg, There are 2 MONFORTS CNC lathes for sale. * Machine 1, MONFORTS RNC4, serves as a source of spare parts. The main circuit board has been removed and used elsewhere. (Chuck cylinder; hydraulic unit, spindle, tailstock; turret; chip conveyor; various control parts are still usable.) You are welcome to submit an offer for this machine. Control: GE Fanuc Tool turret: SAUTER turret ø40 • Type 0.5.801.020; • ID No. 070615; • Com. No. 14-89.44436/7 Without chuck Without tools Accessories: Articulated band chip conveyor Discharge height 1100 mm KS cable carrier Year of manufacture: 1990 Serial No. 3046 ----- * Machine 2 MONFORTS RNC 4 without tailstock Machine No. 137xx Series No. 119xx Control: GE Fanuc Monforts Control System F SAUTER turret ø 40mm • Type 0.5.801.020; • ID No. 070615; • Com. No. 14-89.44436/7 Without chuck, without tools Control powers up without problems. Maintenance, regular replacement of buffer batteries. Condition: The machine can be moved in the X & Z axes. The hydraulic system does not power up, probably because the solenoid valves are stuck due to prolonged downtime. Can be repaired. Accessories: Chip conveyor, KS cable carrier Year of manufacture: 1990; Serial No. 3254 ----- Technical data: RNC 4, RNC series Control: Fanuc 10 T Monforts Control F Max. turning length 600 mm / 1000mm Machine Ø over bed 420 mm Max. turning Ø over cross slide 280 mm Tool turret stations 12 VDI Spindle flange according to DIN 55026 A 6/A 8 Spindle Ø in the front bearing 130 mm Material passage through the spindle 65 mm Speed range, basic version 5-4000 rpm Tool turret, 12 tool positions Total power consumption: 22 kW Machine weight approx.: 4 t Space requirement approx.: m The machines are no longer used in production. Both machines can be sold as a package. The machines are still connected to the power supply. Dwedpfx Alo Ahzfwefed The control of machine 2 powers up without any problems.

Condition: used, Year of construction: 2007, 12-POSITION TURRET - TAILSTOCK - C-AXIS - TOOL MONITOR - IEMCA BOSS 432/32 BAR FEEDER - WELL-EQUIPPED - Dodpfx Ale Ahyrgjfewd DOOSAN/FANUC 0i-TC CONTROL - MACHINE ARRIVING; MORE PHOTOS TO FOLLOW SOON.

Year of construction: 2017, operating hours: 8,000 h, condition: refurbished (used), functionality: fully functional, Used HIKARI Label Printing Machine 6 COLOR LETTERPRESS ,6 UV 1 ROTARY DIE CUTTER 6 substitute metal cylinder covers 6 HIKARI UV DRYER Machine is totally refurbished all mechanically and electronic parts Totally new Schneider servo engine and driver User friendly control by touch screen PVC Base Polimer Cliché Djdpfxo Ahyxfj Alfswd Max. Roll Diameter: 600mm Automatic Limit Sensor control for Paper delivery. Auto Stop when paper exhaust. REWINDER WITH SLITTING MADRELS (25,40 ,76mm) 5 KNIVES Spare Parts 2 more station with all cylinders and spare parts 6 new pressure polyurethane cylinder Max Print Size 250 X 250, Max Thickness Of Paperboard (GSM) 300gsm Board MAX SPEED 8000 IMPRESSIONS

Condition: good (used), Year of construction: 2023, functionality: fully functional, Okuma LU 45 II - 2 SC - 1000, Year of manufacture: 2023, Control system: OSP P 300-LA, 1 turret with 12 stations, 1 turret with 10 stations, Max. turning length: 1000 mm, Electric handwheel, Dsdpfx As Ah E Dmjlfjwd Tool measuring device, Coolant shower for the machining area, Electric door, High-pressure cooling, Strip filter system, Chip conveyor, Tailstock (currently not mounted but available), Chuck size: Ø 500 mm, Spindle speed up to 2,800 rpm, C-axis: 0.001°, Powered tools on the upper turret.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 862 h, load capacity: 8,000 kg, lifting height: 4,565 mm, free lift: 65 mm, fuel type: diesel, mast type: duplex, construction height: 3,465 mm, power: 82 kW (111.49 HP), fork carriage width: 2,015 mm, fork length: 1,600 mm, empty load weight: 12,417 kg, total length: 5,238 mm, drive type: Diesel, construction width: 2,239 mm, Diesel forklift Load center: 900 Fork width: 200 mm Fork thickness: 70 mm ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Duplex Transmission: Techtronix 332+ 3-speed transmission Speed class: 25 Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire condition: 40 - 60% Rear tire type: Superelastic Rear tire condition: 40 - 60% Description: Machine completely workshop-tested, cleaned, and with new UVV and inspection certificates! Machine will be cleaned before delivery! Turret, fork positioner, Hydr. rotating FORK POSITIONER, Series S 11-ZV 80-360°-SO Load capacity 4,500 kg at 1,500 mm load center. Rotation range 360° in both directions, infinitely adjustable fork positioner range 560 - 1,600 mm measured from the outer edge, or 360 - 1,400 mm measured center-to-center. With center stop in front of the carriage rollers, widened slide guide, all hydraulic hoses with heat protection. In addition, the fork positioner has an oil motor protection. The lines of the oil motors are routed in pipes. The hoses are heat-resistant. The cylinder pressure is limited outwards and inwards so that the fork positioner cannot be used for clamping. Technical data: Weight: 2,300 kg ESP: 340 mm Overall dimension: 360 mm (to the rear edge of the carriage) 3rd valve, 4th valve, rear work light, front work light, full cabin, CE certificate, special design, interior mirror, LED, - Drivetrain protection system with engine shutdown - Premium monitoring package - Speed limiter preset to 13 km/h (adjustable) - Mast inclination - 5° forward/6° backward - Accutouch mini-lever hydraulic controls - Automatic hydraulic control - Red seat belt with restraint system - 2 front and 1 rear LED work lights with brake, tail, turn, and reversing lights - Yellow rotating beacon - Activated via ignition switch - Pedestrian warning light (P.A.L) at the front and rear - LED lights mounted on the mast - Red Line (Side) Pedestrian Awareness Lights (Keyswitch Activated) - Key Activated (Automatic) Lights Dedpfx As Ahl Rmelfjwd