Used Turret Rewinder for sale (1,955)

Condition: ready for operation (used), Year of construction: 2009, Control: Fanuc 31i Chuck diameter: 2500 mm Max. turning diameter: 2800 mm Max. workpiece height: 2000 mm Vertical travel of the slide: 800 mm Horizontal travel of the slide: 1500 mm Feed rates: 10 m/min horizontal, 5 m/min vertical Max. spindle power: 60 kW (AC) Max. spindle speed: up to 60 rpm Max. workpiece weight: 25 tons Travel of the cross slide: 1500 mm Automatic tool changer (ATC): 2 units (on each side) Tool positions per changer: 8 Machine weight: approx. 45 tons Dwjdpfe Ah R Rcex Alfed

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, turning height: 1,000 mm, turning diameter: 1,500 mm, total height: 5,600 mm, total width: 4,400 mm, total length: 3,900 mm, rotary table diameter: 1,250 mm, type of input current: AC, rotational speed (max.): 315 rpm, rotational speed (min.): 1 rpm, spindle speed (min.): 1 rpm, spindle speed (max.): 315 rpm, table diameter: 1,250 mm, year of last overhaul: 2016, Equipment: documentation/manual, Berthiez TFM 125 Vertical boring and turningmill with toolholder changiging device Dwodpfx Alszvydlofjd The machine its from 1978 but has been retroifit in 2016 with new Siemens Sinumerk 840D solutionsline This is an high presition vertcal turningmachine with grinding device. Lots of tools its following the machine. The machine its in very good condition! Diameter of table 1250mm Max turningdiameter 1500mm Max turninghigh 1000mm Table high 670mm Max turning table speed 315rpm Spindle 39KW Scale on both axis

Condition: good (used), Year of construction: 2006, functionality: fully functional, Max. machining diameter: 2,800 mm Min. machining diameter: 1,400 mm Max. machining height: 600 mm Dedpfx Alszu Itrsfswd Max. workpiece weight: 5,000 kg Rotational speed of the chuck: 21–68 /min.

Condition: used, Alzmetall AC 32 Turret Double-Head Drilling Machine An extremely robust and rare double-head drilling machine based on two Alzmetall AC 32 drilling head units. This machine is a high-quality industrial design intended for highly efficient series or multi-stage machining. Dwedpfx Aeznic Uslfjd Instead of simple spindles, this machine is equipped with two separate tool turrets. This enables fully automatic machining cycles (e.g., centering, drilling, countersinking, threading) without the need for manual tool changes. Technical specifications & equipment (per head / total system): Manufacturer of drilling head units: Alzmetall (Germany) Model: AC 32 (Electronically controlled with digital display) Drilling capacity: max. 32 mm in steel Threading capacity: max. M 24 / M 30 Tool changer: 2x pivoting turrets with multiple stations Machine table: Solid, ground cast iron table with T-slots for flexible setup Safety: Complete enclosure of the work area (protective cabin) with viewing windows for optimal chip and splash protection Additional functions: Integrated coolant system, compressed air blow-off gun, central counterweight system for easy vertical adjustment of the entire beam More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 1969, Automatic turret lathe brand: INDEX type: B60 new in: 1967 equipped with: 6x turret Thread turning device Material feed Dwodpfoylht Uex Alfjd

Condition: used, Year of construction: 2006, spindle bore: 65 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, NC Lathe (with 2nd spindle, 3 turrets and Y-axis) Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock. Dedpfx Alo Aawrljfewd

Condition: excellent (used), functionality: fully functional, Manufacturer AMADA Model AC255NT Year 2008 Machine type CNC Turret Punch Press Punching force 20 tons / 200 kN Drive system Single AC Servo Drive CNC control AMNC-F Dwedpszzn Tlofx Alfsd X-axis travel 1,270 mm Y-axis travel 1,270 mm Sheet capacity with repositioning Approx. 2,500 × 1,270 mm Max. mild steel thickness Approx. 3.2 mm Max. workpiece weight Approx. 150 kg Max. punching diameter Approx. Ø88.9 mm Turret configuration Depending on configuration: 45 / 51 / 58 stations Auto Index stations Depending on configuration Turret rotation speed Approx. 30 rpm Auto Index speed Approx. 60 rpm Max. punching speed Approx. 370 strokes/min Marking speed Up to approx. 900 strokes/min Punching accuracy Approx. ±0.1 mm Power requirement Approx. 19 kVA Air pressure Approx. 5 bar Machine weight Approx. 12,000 kg Machine dimensions Approx. 4,100 × 2,560 mm, depending on configuration Feeder Automatic sheet feeder / loading system Sheet size for feeder Approx. 1,250 × 2,500 mm fully functionel

Condition: ready for operation (used), Year of construction: 1987, VTL Stanko 1540 Dwjdpfjqd Uvfjx Alfsd Chuck diameter 4000 mm Max Heigth of piece 2000 mm Max weigth of piece 50 to Main motor 63 kw Weigth of machine approx 100 to

Condition: excellent (used), Year of construction: 2018, Clausing Colchester 4VSQ MLLPWR CNC Turret Milling Machine Acu-rite Mill Power 3 Axis CNC Control Table Size 1370 x 254mm Travels: X – 1050mm Y – 390mm Dwsdpsx Af I Aofx Alfjd Z (Quill) – 115mm Z (Knee) – 355mm Vari Speed Head Spindle Taper IS040 Spindle Speeds Low 60 – 500rpm Spindle Speeds High 55 – 4300rpm Weight: 1850Kgs 3 Phase Electrics Manufactured: 2018 Complete with: Vice Interlocking Table Guards Air Draw Bar Tooling Packaged (ISO40) Power Rise and Fall to Knee Auto Lube Worklight Coolant & Swarf Guards / Tray *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79028 Machine Serial Number: TC0015 Cost: £12,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Control system: Fanuc 310i Workpiece diameter: 2000 mm Max. turning diameter: 2400 mm Max. workpiece height: 1800 mm Vertical travel of the ram: 800 mm Horizontal travel of the ram: 1400 mm Feed rates: 10 m/min horizontal, 5 m/min vertical Max. spindle power: 45 kW AC Travel of the cross slide: 1200 mm Tool changer (ATC): 2 units (on each side) Tool positions per changer: 8 each Machine weight: approx. 30 tons Dsdpfe Ah R N Aex Alfjwd

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, total width: 1,990 mm, total length: 4,500 mm, total height: 2,300 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, overall weight: 9,000 kg, Gildemeister Sprint 65 Linear - CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Technical details: Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Dsdps Aawvwofx Alfswd Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 1993, Distance between centres 2000mm Machine Dimensions – L 5845mm x W 2580mm x H 2390mm Height from floor to spindle centreline 1150mm Distance from machine front to spindle centreline 500mm Slant bed inclination 45 deg Machine weight 11500kgs Capacity Swing overbed 700mm Swing over carriage 500mm Maximum machining diameter 700mm Maximum machining length 2000mm Distance between centres 2075mm Distance between maximum main spindle nose and turret face – max 2175mm / Min 105mm Main spindle and headstock Main motor - standard KW – AC 37/30 Spindle speed – 3 – 2000rpm H -17 – 2000rpm M – 7 – 800rpm L – 3 – 310rpm No of spindle speeds – 3 Spindle nose type – JIS A1 – 11 Front spindle bearing ID 170mm Tapered hole in spindle - metric taper No 120 Hole through spindle 105mm Hole through draw tube 90mm Max torque of main spindle 364kg Max loading capacity including weight of chuck with work between centres 2000kg Max loading capacity including weight of chuck with work held by chuck 500kg Saddle an carriage Servomotor X axis – 1.8kw Servomotor Z axis – 3.5kw Max cutting force – 1000kg Max travel X axis 380mm Dwsdpfxe Aiiaks Alfjd Max travel Z axis – 2070mm Rapid traverse X axis – 12000mm Rapid traverse Z axis – 15000mm Turret Turret head type V12 Number of tool positions 12 Size (distance across flats x width of turret head) 530 x 130mm Maximum cutting tool size 32 x 25mm square / 63 mm round Diameter of curvic coupling 320mm Clamping force 8000kg Max tool swing diameter 750mm Tailstock Distance between spindle nose and centre 2205mm / Min 21.9mm Taper in tailstock spindle MT No 5 Tailstock spindle stroke 150mm Tailstock spindle diameter 160mm Tailstock spindle turret 430 – 1500kgf Tailstock travel 1650mm

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 255100, punching force: 20 t, total height: 2,150 mm, total width: 2,900 mm, total length: 4,900 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, working range: 1,270 mm, type of input current: three-phase, travel distance X-axis: 1,270 mm, travel distance Y-axis: 1,270 mm, workpiece weight (max.): 75 kg, overall weight: 11,000 kg, input current: 40 A, input frequency: 50 Hz, table load: 75 kg, feed rate X-axis: 82,000 m/min, feed rate Y-axis: 82,000 m/min, feed rate Z-axis: 82,000 m/min, travel speed (max.): 82,000 mm/min, input voltage: 400 V, AMADA EUROPE 255 CNC Punching Machine CNC turret punching machine AMADA EUROPE 255, year 1999, equipped with a GE Fanuc Series 18i-P CNC control. The machine is installed and available for inspection and demonstration while powered on, by appointment. Technical specifications: Manufacturer: AMADA EUROPE Model: EUROPE 255 Year of manufacture: 1999 CNC control: GE Fanuc Series 18i-P Punching force: 200 kN (20 t) Working range X x Y: 1,270 x 1,270 mm Maximum sheet thickness: 3 mm Table load: 75 kg Turret: 27 stations Maximum positioning speed: 82 m/min Power supply: 400 V / 50 Hz / 3-phase Nominal current: 40 A Installed power: 29 kW Machine dimensions: approx. 4,900 x 2,900 x 2,150 mm Machine weight: approx. 11,000 kg CE marked The machine is currently installed and can be inspected while powered on. Available immediately. Inspection by appointment. Djdpfxezw Ui Es Alfowd Location: Greece

Condition: ready for operation (used), Year of construction: 1990, operating hours: 18,891 h, travel distance X-axis: 135 mm, travel distance Z-axis: 520 mm, controller manufacturer: FANUC, number of axes: 2, Turn-mill centre manufactured in 1990. This MORI SEIKI SL 15 features a maximum swing over bed of approximately 450 mm and a standard turning diameter of around 160 mm. It offers a maximum turning length of approximately 525 mm and a spindle speed range of 50 to 6,000 rpm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL 15 machine we have for sale. Contact us for further details. Dwjdpfx Ale Aift Iofjd Control: Mori Seiki MF-T4 (Fanuc-based CNC control)- Run Time (Operating Hours): 18,891 hours, 44 minutes- Part Count: 341,959- Cycle Time: 0 hours, 3 minutes, 40 seconds- X-Axis Travel: Approx. 135 mm (5.3 in)- Z-Axis Travel: Approx. 520 mm- Max. Swing Over Bed: Approx. 450 mm (17.7 in)- Standard Turning Diameter: Approx. 160 mm (6.3 in)- Max. Turning Length: Approx. 525 mm (20.7 in)- Distance Between Centers: Approx. 600 mm (23.4 - 25.4 in)- Spindle Bore: 52 mm (2.05 in)- Bar Capacity: Approx. 45 mm (1.77 in)- Spindle Speeds: 50 - 6,000 rpm- Tool Turret Capacity: 12 stations- Tailstock Taper: MT4- Spindle Motor Power: Approx. 7.5 / 5.5 kW (10 HP)- Voltage: 200/220 V, 3-Phase Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: NX1102193, SPECIFICATION Table size 1244 x 230mm Longitudinal traverse 700mm Cross traverse 300mm Vertical traverse 405mm Quill travel 125mm Quill feeds 0.045-0.086mm/rev Quill diameter 86mm Quill taper R8 Spindle motor 2.2kW Spindle speeds (inf. Variable) 50-3500rpm Weight 1200Kg Machine in Metric execution Dodoy S Shwjpfx Alfjwd MACHINE EQUIPPED WITH Sino 3 axis DRO system Longitudinal power feed One shot centralised lubrication system Low voltage halogen worklight Spindle guard Coolant system

Condition: used, HERBERT 9C-30 TURRET LATHE MAKE HERBERT, MADE IN ENGLAND MODEL 9C - 30 MAX DIAMETER OVER BED 762.0 mm CHUCK TYPE 4 JAW CHUCK SIZE 630.0 mm MAX DIAMETER OVER CROSS SLIDE 535.0 mm Dwjdpfxey H Hc Es Alfsd MAX DIAMETER IN FRONT OF CROSS SLIDE 737.0 mm LENGTH BETWEEN CHUCK FACE -TURRET FACE 1505.0 mm TRAVEL OF TURRET 1066.0 mm DIAMETER OF HOLE THROUGH SPINDLE 125.0 mm SPINDLE SPEED 7 – 600 RPM PLUS 2 AXIS DIGITAL READ OUT TAPER TURNING

Condition: excellent (used), Year of construction: 2006, CNC Teach-in Lathe COLCHESTER Alpha 1350 XT Travel X: 245 mm Djdpfx Alo Aih Dksfewd Numerical Command FANUC Between points: 650 mm Maxi turning diameter: Ø 350 mm Spindle diameter: Ø 41 mm Max Rotation: 3500 RPM Turret: 8 tools VDI 30 Year of construction: 2006 Spindle motor: 5,5 kW 3 speed ranges Centralized lubrication pump Delivered with 2 3-jaws chuck Ø 160 mm Delivered with some tool holders (see photos) Voltage: 380 V Dimensions (L x W x H): 2500 x 2000 x 1900 mm Weight: approx 2 T Machine in very good condition

Condition: used, Technical details: faceplate diameter: 1400 mm swing diameter: 1470 mm turning height: 1325 mm ram stroke range: 750 mm adjustment of cross-rail: 850 mm max. workpiece weight: 12000 kg faceplate turning speed range: 4,5 - 224 U/min feed per revolution: 0,06 - 8 mm rapid speed: 1,8 m/min total power requirement: 50 kW weight of the machine ca.: 16 t Machine was modernized in 2008 with new electric 2-axes digital readout 5-station turret head autom. swivelling diverse toolholders Dodpsztn U Tefx Alfewd *

Condition: used, Offered is a single-column vertical turret lathe with tool turret. Equipped with a large rotary table with radial clamping slots, clamping brackets, vertical tool slide with turret head, digital position readout, work light and separate control panel. Inspection possible by arrangement. Djdpfe Afplbex Alfowd

Condition: used, Year of construction: 2007, Technical details: faceplate diameter: 1600 mm power requirement: 80 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 4,4 x 4,62 m max. workpiece diameter: 2000 mm max. diameter of face turning: 1800 mm tool taper: ISO50 The machine has been regularly serviced and is in good technical condition. With C-Axis * Djdpfx Ajx Aq E Hjlfowd

Condition: used, Year of construction: 2018, GENERAL TECHNICAL DATA: Performance • Maximum speed: up to 400 m/min • Speed dependent on material properties and slitting conditions Web & Dimensions Working width: 40 – 400 mm Maximum web width: 400 – 450 mm Roll Specifications Maximum unwind roll diameter: 520 mm Maximum rewind roll diameter: 520 mm Maximum roll weight: 100 kg Core diameters: • Unwinding: 76 mm (3”), adapter 120 mm • Rewinding: 76 mm (3”), adapter 120 mm Materials • Paper • Aluminium • Laminates • Flexible films • Material thickness: - Films: 30 – 100 µm Electrical Data Main supply: 3 × 400 V, 50 Hz Auxiliary voltage: 220 V AC / 24 V DC Installed power: approx. 8 kW Pneumatic Requirements • Air pressure: 6 bar Machine Features • Center winding system with contact rollers • Shaft winding system (expandable mandrels) • Reversible winding direction • Edge guiding system (FIFE with SE46C sensor) • Glue table with 2 independent clamping bars Cooling System • Electrical cabinet cooling: Water cooling (HÄWA) Noise Level • Sound level: < 75–80 dB Dedpoyx Dc Tjfx Alfswd Safety • Floor scanner • Side protection fence

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, turning height: 2,200 mm, workpiece weight (max.): 18,000 kg, turning diameter: 3,300 mm, feed length Y-axis: 2,050 mm, faceplate diameter: 3,000 mm, spindle speed (max.): 112 rpm, power of the servo motor: 70,000 W, Table diameter: 3000 mm - Manual 4 Morse Turning diameter: 3300 mm Maximum permissible weight: 18 tons Maximum workpiece height: 2200 mm Number of rams: 1 Ram stroke: 1200 mm Vertical travel of the cross slide: 2050 mm Spindle motor power: 70 kW Spindle rotation speed: 0 - 112 RPM Number of speed ranges: 3 Tool changer: 14 positions Dwjdpfx Aloznl Sfofed USED MACHINE OVERHAULED IN 2016

Condition: excellent (used), travel distance X-axis: 600 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 395 mm, Table: 1,200 x 300 mm X-axis travel: 600 mm Y-axis travel: 350 mm Z-axis travel: 395 mm Tailstock travel: 127 mm Control unit: Fagor nv 300M Spindle power: 3 hp Spindle speed: 60 - 4,000 rpm Tool holder: Bt 40 Tool clamping: Automatic CE safety features Powered feeds Coolant pump Dimensions (width x length x height): 1,800 x 1,700 x 2,300 mm Dwsdpsz R I R Asfx Alfod Weight: 1,900 kg

Condition: good (used), Year of construction: 1959, HESTIKA 22N Hand lever turret lathe Dodpfx Aerm R Duslfjwd

Condition: ready for operation (used), functionality: fully functional, JOHNFORD 2VS TURRET MILL Excellent Condition! Dwsdpfx Aljy Tt S Tsfed • R8 spindle • 42" x 9" table • 2-axis DRO • Work light • Coolant Machine cleaned and serviced Price: €4,250 ex works JOHNFORD 2VS FRÄSMASCHINE Ausgezeichneter Zustand! • R8-Spindel • 42" x 9" Tisch • 2-Achsen-Digitalanzeige (DRO) • Arbeitsleuchte • Kühlmittelanlage Maschine gereinigt und gewartet Preis: 4.250 € ab Werk