Used Turret Rewinder for sale (2,010)

Condition: as good as new (ex-display), Year of construction: 2022, 450 Automatic Die Cut and Turret Rewinder 450mm Rotary Die Cutting unit: -Unwinder with auto web guider -Auto Tension Control system -Pressure meters for die cutting unit -Standard slitting unit with 6sets blades -Standard matrix removing system -Magnetic Powder system,mechanical speed 100meters/min -Max unwinding diameter 700mm, web width 330mm -Standard connection component to 330 turret rewinder 450 Auto Turret rewinder: -Automatic paper core bowl feeder -Automatic tail glue unit -Automatic paper core conveyor -Pressing paper swing arm -Automatic cut unit -Automatic finished roll ejection -Automatic brush press paper unit -Automatic core glue unit -Air expanding shaft 4sets each sizes 1’’, 1.5’’ and 3’’ -Labeling System (optional): Included Features: Speed: 60-100 m/min Hfjdpfjh Uctvox Agtol Max. Rewinding Diameter: 350mm Max. Web Width: 450mm Min. Rewinding Width: 40mm Total Power: 8KW Power Supply: 3PH+N+PE Air Source: 0.8MPa (As 40*30 products, 25m a small roll calculation: 3000m raw materials, average 30 minutes a roll of raw material. Every 25m a small roll and rewinding 6 rolls at the same time. 720 rolls can be produced in 10 minutes) Machine in stock in our showroom

Condition: excellent (used), Year of construction: 2023, Max. master reel width: 1400 mm Max. master reel weight: 1000 kg Max. master reel diameter: 1000 mm Minimum standard slit: 25 mm Rewinding reel maximum diameter: 610mm Maximum production speed: 1000m/min Separated shaftless unwinder Automatic positioning of the web guide camera Razor blades/circular knives/pneumatic knives with automatic slit positioning ASP Automatic tape applicator Linear lay-on rollers 4 differential or pneumatic shafts, mounted on two turrets with automatic reel change Automatic slit reel unloading and positioning Hodpszhwgbofx Agtjfl Automatic core positioning 6 motors Automatic web tension control through loading cells The machine has chucks for 76 and 152mm The machine has positioning for top knife AND bottom knife; the Automatic Slit Positioning handles the positioning of both the knife and the counter knife APPLICATIONS: Bags, Food packaging, Outer packing, Soft drinks/mineral waters labelling, Aluminum covers for pharmaceuticals MATERIALS: PE, Aluminium, Papers, Laminates

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). Hfodoyx Uy Aepfx Agtjl • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, turning height: 2,200 mm, turning diameter: 4,000 mm, faceplate diameter: 3,100 mm, table diameter: 3,100 mm, workpiece diameter (max.): 4,000 mm, FULLTONTECH CK5240 CNC vertical turret lathe, year of construction 2016. The machine was purchased new by us in 2016 and is offered for sale by the first owner. It is equipped with a Siemens control and has a double turret: one side CNC-controlled, the other side manually operated. Technical data: - Faceplate / chuck diameter: 3,100 mm - Max. internal clamping / turning diameter (X): 4,000 mm - Machining capacity (Y): 2,200 mm - Control: Siemens Hfodjz Anr Djpfx Agtel - CE marked Well maintained, in full working order and ready for immediate delivery.

Condition: good (used), Year of construction: 2019, Max. printing width 1500 mm Print repeat length (min. – max.) 400 – 850 mm Machine speed 500 m/min max Type of inks: Solvent based inks Material to be printed PP 10 um-200 µm BOPP 10 um-60 µm LDPE 20 um-200 µm CPP 20 um-70 µm HDPE 15 um-150 µm PET 12 um-50 µm OPA 15 um-50 µm Machine power supply 400V Turret unwinder TAU-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 640 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 810 mm Pneumatic dancing roller Turret rewinder TAR-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 510 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 740 mm Pneumatic expansible shaft , I.D. 76 mm, 152 mm Antistatic bars ACE Blade slitting device Longitudinal blade slitting device, composed of 2 blades for side slits, complete with supports. Trim exhauster Noise-insulated trim exhaust device which consists of an electroblowing fan, Venturi pipe and trims collectio pipes with two exhausting nozzles. Edge guide OPG, electromechanical type, with single ultrasonic sensor, manually adjustable, to guide the edge of the web. Edge guide Kamberoller, electromechanical type, with single ultrasonic sensor, adjustable by motor Corona treating system Ferrarini&Benelli Reprint system, on the front or back side of the printed material Centralized manual (grease ) lubrication of CI drum bearings Hastelloy coated central drum Color unit opening: controls on external color units and internal color units Printing pressures adjustment The automatic system P2P allows to compensate the decrease of either the printing pressure and the colour density pressure, at machine speed increases Throw off( delayed impression release) Automatic, horizontal and activated by the same four motors moving the colour unit Printing units positioning Touch&Go It is a function which perfoms a sequence of “pre-defined” positions of the plate and anilox axis through the printing unit positioning system. Plate cylinders adjustment Tune&go It is an automatic tuning software which detects the best configuration for the adjustment of the plate cylinder, automatically modifying the control system according to the different types of plate. Pre-Register automatic print-to-print regiser pre-set “G” (Gearless) The term "Print-to-print register pre-set" is understood as the procedure used to position the printing plate cylinders on the press in phase one with the other as to achieve a printing register starting with a tolerance limit± 2 mm. Hfedpfxsvakdzo Agtjl Computer control The system is composed of an industrial computer equipped with a 19" SXGA TFT Single-touch IP65 L SVGA monitor Inking and washing system for anilox rolls and doctor blades Viscosimeter Gama G 26 Inks cooling and temperature control system with bank heat exchangers and regulation valves. Drying system Hot air gas burner with heating capacity up to approx. 150.000 Kcal/h ( BTU), composed of a burner installed inside the main air duct, complete with fan for combustion air, regulatory and safety devices. The exact heating capacity will be communicated during the completion of the machine. Infrared LEL monitoring system MSA Web Inpection Progress 500 Grafikontrol

Condition: used, functionality: fully functional, We are selling this machine. It is connected and can be tested. A video of the machine can be sent via the WhatsApp application. Documentation for the machine is available. Speeds: 1st range: 0.35-3.5 rpm Hfedoydqfdepfx Agtsl 2nd range: 1.4-14 rpm Drive: 2 regulating motors, each with 120 kW, powered by a 240 kW Ward-Leonard converter. Diameter of the clamping plate: 8,000 mm Largest turning diameter: 12,500 mm Turning height: 2,200 mm The machine underwent a major overhaul and modernization in 1991. Maximum workpiece weight: 200,000 kg Machine weight: 550,000 kg Please submit your offer.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, GEARLESS FLEXOGRAPHIC PRINTING PRESS KOENIG & BAUER FLEXOTECNICA EVO XDN8 Flexographic printing press with a central cylinder Gearless 8 colors Maximum printing width: 1000 mm Maximum material width: 1050 mm Minimum/maximum print repeat: 330/750 mm Fully automatic turret unwinder and rewinder Maximum coil diameter: 1000 mm Gas drying system BST 100% camera system Viscometers Hfedpezx Tuiefx Agtol FIFE web guide Year 2019

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Central impression flexographic printing press Hedpjzylygefx Agtofl Brand: Koenig & Bauer Flexotecnica Model: EVO XDN10 Gearless 10 printing units Maximum printing width: 1300 mm Minimum/maximum print repeat: 330/1050 mm Fully automatic turret unwinder and rewinder Maximum coil diameter: 1000 mm Gas drying system BST 100% camera system Viscometers FIFE web guide Year: 2019

Year of construction: 2022, condition: good (used), Manufacturer / Model: Grafotronic DCL2 550 Serial Number: 220520G Web Width: 550 mm Year of Manufacture: Location: Germany Condition: Used – in production CE Marking: Yes _____ Main Configuration Unwinder Module: • Max. roll Ø 1000 mm / weight 430 kg Hedpfx Agsxq A Hljtofl • Ultrasonic sensor and web guide ±15 mm • Splice table with clamps, servo brake, reel lift Flexo Printing / Coating Module (10–24" repeat): • GEW E2C UV dryer • Ceramic anilox 400 l/cm – 5.5 cm³/m² • Stainless steel ink pan 1.2 L, reverse-angle doctor blade • Re-register drive for overprinting • Max. speed 100 m/min – tolerance ±0.1 mm Die-Cutting Module (10–24" repeat): • Servo register system, anvil & support roller • Contact matrix rewind, stripping bar • Delam/Relam before die-cutting (limit 70 m/min) • Max. speed 250 m/min, tolerance ±0.1 mm Inspection & Slitting Section: • Missing Label Detection (MLD) up to 220 m/min • Automatic Sci-Fi knife system (12 sets) • Vacuum edge-trim removal • Auto-set under/back scorer (2 knives) Semi-Automatic Turret Rewinder: • 2 × Ø 600 mm rolls • Semi-automatic cutting and push-out system • Label & meter counters • Core diameters 40–76 mm Additional Equipment: • Anti-static brush • Tablet with housing and accessories • ERP interface • Crane for magnetic cylinders Materials: • Foil 30–250 µm • Paper 100–250 µm _____ General Condition: Overall in good working order. According to the operator, two UV units require lamp replacement, which represents a minor cost. All other modules are fully functional.

Condition: good (used), Automatic cloth rewinder for offset printing machines Hfjdpfx Agjzuryistel Manufacturer: Vliesstoff Kasper Very good condition. 380V power supply, foot pedal control Device suitable for B1 and B2 format machines

Condition: used, Year of construction: 2001, Number of printing units: 8 Web width: 1,270 mm Print width: 1,200 mm Print repeat: 300 - 1,000 mm Unwinder type: Double Axis Drop Splice Rewinder type: Turret Fully Automatic Splice Drying: Hot air – electric heaters Video camera: BST Euroscope Web guides: Yes Material: Plastic webs Camber doctor blades number: Yes Hodpfx Ajx E Tm Ujgtofl Ink pumps: 8 Type of ink: Solvent based Transmission: Bull gear Length/Side registers: Motorized remote controlled

Condition: used, Year of construction: 2023, functionality: fully functional, turning diameter over cross slide: 410 mm, turning length: 500 mm, turning diameter: 410 mm, spindle bore: 80 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 510 mm, spindle motor power: 22,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 5,000 rpm, total height: 2,145 mm, total length: 3,272 mm, total width: 2,619 mm, quill stroke: 150 mm, overall weight: 6,800 kg, swing diameter over bed slide: 580 mm, Equipment: documentation/manual, We offer this used Okuma LB3000 EX II MY CNC lathe with ARMROID Automation. Year: 2023. Control: OSP-P300LA Excellent Clean Condition, fully operational and under power. Configuration: Single spindle CNC Turning Center with Armroid Robotic Arm. Main Spindle Seed: Up to 5,000 rpm Spindle Bore / Bar Capacity: 80mm Max Turning Diameter: 410mm Max Turning Length: 500mm Swing Over Bed: 580mm Turret: 12-station live tol turret Spindle Motor Power: 15 kW (20 HP) - (continuous) Y Axis Travel: 120mm (+70 * -50mm) Thermal Stabilization system (TAS for spindle and structure) to mitigate thermal expansion. Tail Stock Integrated Okuma robotic arm system for lights-out operation. Chip conveyor Regularly maintained and in excellent condition - last service September 2025 Byer is responsible for removal and delivery Hfjdjzi Ihfspfx Agtjl Machine can be used with or without robot loader as required making it very versatile

Condition: like new (used), Year of construction: 2011, OMET Varyflex VF1 Hodpfx Agjyyn Hfotjfl Year of manufacture: 2011 Web width: 850 mm Printing process: Flexo + Rotogravure combination line Condition: Used – very good condition Location: Europe _____ Machine Configuration • 8 x UV flexo printing units (equipped with new UV lamps, LED-ready) • All flexo units in ATEX execution (suitable for solvent-based inks) • 1 x rotogravure unit (compatible with solvent- and water-based inks) • 1 x die-cutting unit (530 mm) • In-line slitting system • Double turret rewinder • Turn bar (web turning system) • Hot air dryer on first printing unit • Cold seal trolley (movable) • Cold foil unit (cassette type, positionable on any unit) _____ Equipment & Tooling • Extensive anilox roller package • Sleeve system (well maintained) • Tooling in very good condition Optional (available upon request): • Omet plate mounter • Bimec slitter rewinder 1200 mm (almost new condition) _____ Technical Highlights & Advantages The OMET Varyflex VF1 is a highly versatile production platform designed for both label and flexible packaging applications. Key advantages: • Wide web format (850 mm) – ideal for high-volume production • Hybrid configuration (flexo + rotogravure) for maximum flexibility • ATEX design allows use of solvent-based inks • LED-ready UV system for future energy efficiency upgrades • Modular configuration with movable units (cold foil/cold seal) • Excellent condition with recently updated electronics (PLC, drives, control cabinets) • Proven application: previously used for polyethylene-coated materials (80–90 g/m²), ensuring reliability in demanding environments This machine offers an outstanding balance between performance and flexibility.

Condition: used, Year of construction: 2007, The machine has undergone extensive modernization, including: • Regi-Star 20 register control upgrade • IPQ Check Pro 100% print inspection system HELIOSTAR S DRIVE RETROFIT The original gravure cylinder drive system has been upgraded to the latest Heliostar S configuration, including: • New gravure cylinder drive motors Hfsdpfszrugtsx Agtjl • Upgraded inking roller drive system • New cylinder chucks with adapters • Chuck drive supports • Chuck sensor system • New gravure cylinder bearings • Upgraded sidelay register components • New sidelay register drive units • New sidelay register safety guards • Mechanical retrofit and mounting components • Electrical accessories and complete technical documentation FEATURES • Excellent mechanical condition • Outstanding cosmetic condition • Fully operational and production ready • Extensive modernization program • High-performance automatic turret unwind and rewind • Gas-heated drying system • Integrated corona treatment • Automatic ink viscosity control • BST 100% web inspection • Suitable for high-quality flexible packaging production TECHNICAL SPECIFICATIONS Specification Details Printing Process Rotogravure Number of Colours 8 Web Width 1,020 mm Maximum Print Width 1,000 mm Print Repeat Range 450 – 1,050 mm Unwind Diameter 1,000 mm Unwind System Turret flying splice with reel lift Drying System Gas heated Corona Treater Yes Ink Viscosity Control Yes Edge Guide System Yes Inspection System BST Rewind Diameter 1,000 mm Rewind System Turret flying splice with reel lift (76 mm & 152 mm cores) Machine Features • 8-colour high-performance rotogravure printing press • Automatic turret unwind and rewind with flying splice • Gas-heated drying system • Integrated corona treatment • Automatic ink viscosity control • Web edge guiding system • BST web inspection system • Suitable for high-quality flexible packaging and converting applications • Robust W&H engineering for reliable, high-speed production Applications Ideal for printing: • Flexible packaging • Food packaging • Industrial packaging • Laminating films • Printed plastic films • High-quality packaging materials

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, spindle speed (max.): 3,500 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 750 mm, controller model: FANUC 0i-TC, Equipment: bar feeder, TECHNICAL DETAILS Travel range, X-axis: 300 mm Travel range, Z-axis: 750 mm Hjdpfxjzwghme Agtofl Rapid traverse rate, X-axis: 20 m/min Rapid traverse rate, Z-axis: 24 m/min Spindle speed max.: 3,500 rpm Bar diameter: 75 mm Spindle motor power: approx. 15 / 18.5 kW Tool turret stations: 12 MACHINE DETAILS Control system: FANUC 0i-TC Number of axes: 2 Dimensions & Weight Dimensions (L x W x H): approx. 3,300 × 1,800 × 1,800 mm Machine weight: approx. 5,500 kg Bar feeder FEDEK DH-65L Bar length: approx. 1,500 mm Bar diameter: approx. 5–65 mm EQUIPMENT Tailstock FEDEK DH-65L bar feeder Bar feeder interface

Year of construction: 2008, condition: ready for operation (used), machine/vehicle number: LF 020, Min. / max. web width: 150 – 330 mm Min. / max. paper weight: 90 – 160 g/m² Max. unwind roll diameter: 1000 mm Max. rewind roll diameter: 400 mm (300 mm when using the 3-shaft turret) Core diameter: Unwind: 76 mm / Rewind: 40, 45 and 76 mm (3 sets of 3 shafts) Max. speed: 200 m/min Hfjdpfey Shztsx Agtjl Description: Unwind with splicing tables and clamping devices, web guiding and tension control (including automatic web clamping during stop operation as well as dancer rollers), up to 12 rotary or 12 stationary knives within a pneumatically controlled slitting unit, edge trim extraction, interactive digital control panel with color touchscreen, program memory, settings management, counting functions (labels or running meters), and inspection control (missing label detection), fully automatic 3-shaft turret rewinder for non-stop operation. All required safety devices are installed on the machine.

Condition: good (used), Year of construction: 1972, functionality: fully functional, turning height: 1,000 mm, turning diameter: 1,600 mm, faceplate diameter: 1,400 mm, Retrofit: 2001 Siemens control system SINUMERIK 840D Faceplate diameter 1,400 mm Turning diameter 1,600 mm Turning height 1,000 mm Fully functional. Please refer to the photos for further information. A video of the machine in operation can be provided upon request. Inspection appointments are possible by arrangement. The buyer must arrange the collection. Loading onto a truck/container provided by the buyer is included. Invoice with VAT shown. Since these are used machines/used accessories, we exclude any warranty or guarantee. Hsdpszvl R Rjfx Agtofl The information is provided to the best of our knowledge, and we assume no liability. We reserve the right to make changes to technical data and to correct any errors in the description. The buyer has the right to inspect the goods for condition and functionality before concluding the contract. We exclude any warranty for obvious and hidden defects, as well as compensation for damages of any kind, including damages that did not occur to the delivered item itself.

Condition: good (used), Year of construction: 1968, functionality: fully functional, Plate diameter …. 8000 mm Max. turning diameter 12,500 mm Hfodpfxjzx Hcts Agtjl Machining height 4,000 mm Maximum workpiece weight on the plate 120,000 kg. Approximate weight 556,000 kg.

Condition: used, Year of construction: 2000, The Carint central impression flexographic printing press is designed for printing on PE, PP, OPP, PET films, and paper. The machine features 6 printing units (6+0), a geared drive, and is suitable for a wide range of flexible packaging applications. Material width: 1,280 mm Printing width: 1,250 mm Print repeat: Min: 360 mm / Max: 1,040 mm Mechanical speed: Up to 300 m/min UNWINDER AND REWINDER The machine is equipped with a non-stop turret unwinder and a non-stop turret rewinder. Maximum reel diameter: 800 mm. Expanding shafts: 3" Hfedpezku Nlsfx Agtol DRYING SYSTEM Electrical drying system. INK SUPPLY 6 pneumatic ink pumps. ACCESSORIES • Motorized longitudinal register • Chamber doctor blade system • 8 Anilox cylinders • 6 Plate cylinders • Video inspection system • Web guides • Banana rollers • Plate cylinder lifting hoist • 2 electrical hoists • 2 cylinder storage racks with 6 cylinders of various repeat sizes

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Stack Manzoni Printing Press Stack flexographic printing press with 6 colors. Brand: Manzoni. Materials that can be printed: plastic film and paper. Printing options: 6+0, 3+3, 4+2, 5+1. Maximum material width: 1300 mm. Hfedpozxdi Rofx Agtsl Maximum printing width: 1200 mm. Printing repeat length: 400 to 700 mm. Automatic unwinder and rewinder with turret system. Automatic material control system: Rainbow 98P.

Condition: excellent (used), functionality: fully functional, Manufacturer AMADA Model AC255NT Year 2008 Machine type CNC Turret Punch Press Punching force 20 tons / 200 kN Drive system Single AC Servo Drive CNC control AMNC-F X-axis travel 1,270 mm Y-axis travel 1,270 mm Hsdezzn Tlopfx Agtjfl Sheet capacity with repositioning Approx. 2,500 × 1,270 mm Max. mild steel thickness Approx. 3.2 mm Max. workpiece weight Approx. 150 kg Max. punching diameter Approx. Ø88.9 mm Turret configuration Depending on configuration: 45 / 51 / 58 stations Auto Index stations Depending on configuration Turret rotation speed Approx. 30 rpm Auto Index speed Approx. 60 rpm Max. punching speed Approx. 370 strokes/min Marking speed Up to approx. 900 strokes/min Punching accuracy Approx. ±0.1 mm Power requirement Approx. 19 kVA Air pressure Approx. 5 bar Machine weight Approx. 12,000 kg Machine dimensions Approx. 4,100 × 2,560 mm, depending on configuration Feeder Automatic sheet feeder / loading system Sheet size for feeder Approx. 1,250 × 2,500 mm fully functionel

Condition: like new (used), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, turning height: 1,500 mm, workpiece weight (max.): 8,000 kg, turning diameter: 1,700 mm, feed length X-axis: 1,100 mm, feed length Z-axis: 1,200 mm, faceplate diameter: 1,450 mm, feed rate Y-axis: 300 m/min, feed rate Z-axis: 300 m/min, total width: 5,000 mm, total length: 5,500 mm, rapid traverse X-axis: 4,000 m/min, rapid traverse Y-axis: 4,000 m/min, type of input current: three-phase, rotational speed (max.): 200 rpm, rotational speed (min.): 200 rpm, spindle speed (max.): 200 rpm, table load: 8,000 kg, year of last overhaul: 2025, travel distance X-axis: 1,200 mm, travel distance Z-axis: 1,200 mm, stroke length: 1,200 mm, disc diameter: 1,450 mm, overall weight: 21,000 kg, tool weight: 3,000 g, power of the servo motor: 40,000 W, repeat accuracy: 0.01 mm, Equipment: documentation/manual, CNC vertical lathe SC17, completely modernized in 2025 with Fanuc control. The machine is in very good condition, fully functional, live and available for inspection and testing. Technical specifications: Maximum turning diameter: 1700 mm Maximum workpiece height: 1500 mm CNC: Fanuc (complete modernization in 2025) Condition: functional, live Type: vertical turret lathe Advantages: Recent modernization - no additional investment required Reliable Fanuc control system Suitable for large workpieces Video available on request. Price on request Hfedjyxfgmopfx Agtel

Condition: excellent (used), Year of construction: 2008, operating hours: 12,000 h, functionality: fully functional, Basic information: Manufacturer: HANKOOK Machine Tools Model: VTC 85R Year of manufacture: 2008 Control system: FANUC Series 21i-TB CNC vertical turning center Full C-axis Powered tools Accessories included in the machine price: hydraulic chuck Ø 600 mm clamping plate Ø 1,000 mm set of jaws 4 pcs of vices Hfodpfxszx S Uuj Agtel clamps holders for powered tools Thanks to the C-axis and powered tools, the machine is also suitable for combined machining, drilling, and milling operations without the need to transfer the workpiece to another machine. Extensive clamping and tooling accessories are included. Operational status: only approximately 12,000 operating hours the machine was primarily operated in a single-shift operation it was not fully utilized for production the machine is connected and can be demonstrated in operation. Machine dimensions: height: 3500 mm length including conveyor: 5500 mm width: 2500 mm

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, turning length: 1,050 mm, turning diameter: 465 mm, spindle speed (max.): 3,250 rpm, overall weight: 7,600 kg, controller manufacturer: Heidenhain, TECHNICAL DETAILS Maximum turning diameter: 465 mm Maximum swing diameter: 680 mm X-axis travel: 300 mm Z-axis travel: 1,050 mm Turning length: 1,050 mm Maximum spindle speed: 3,250 rpm Spindle bore: 76 mm Torque at 40% duty cycle (ED) max.: 630 Nm Torque at 100% duty cycle (ED): 420 Nm Number of tool positions in tool turret: 12 stations Chuck diameter: 250 mm Maximum workpiece weight between centers: approx. 350 kg MACHINE DETAILS Control system manufacturer: Siemens Spindle power at 40% duty cycle (ED): 33 kW Hfjdsz Apdujpfx Agtjl Spindle power at 100% duty cycle (ED): 22 kW Electrical connection: approx. 50 kVA Mains connection: 400 V Frequency: 50/60 Hz Dimensions & Weight Dimensions with chip conveyor: approx. 5,300 × 1,900–2,200 × 1,700–2,000 mm Machine weight: approx. 7,500 kg EQUIPMENT Chip conveyor

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 7,200 mm, travel distance Y-axis: 485 mm, travel distance Z-axis: 340 mm, spindle speed (max.): 6,000 rpm, machine/vehicle number: 1310031108, TECHNICAL DETAILS Travel range, X-axis: 7,200 mm Travel range, Y-axis: 485 mm Travel range, Z-axis: 340 mm Rapid traverse rate, all axes: max. 60 m/min Spindle speed: max. 6,000 rpm Spindle power: 5.5 kW Tool changer: Turret head Tool positions: 8 Hodpszxngyofx Agtsfl MACHINE DETAILS Compressed air supply: 7 bar Compressed air consumption: approx. 100 l/min (with spray device) Electrical connection: 400 V, 3 ~, 50 Hz EQUIPMENT Turret tool changer with 8 tool positions