Used Turning Machine for sale (65,122)

Condition: good (used), Year of construction: 1977, workpiece weight 279 KG Blodpfx Aajrfd U Refsc length ca. von Bett bis Lynette mm 189 € . max durchlass 369 mm

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Blodpswym Nfefx Aafjc Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: new, Equipment: rotational speed of tool magazine infinitely variable, Heavy grey cast iron machine bed for optimal smooth running and stability when working with unbalanced workpieces Headstock can be moved along the entire machine bed, rotatable by 360° with detents at 0, 30, 60, 90, 135, 180, and 270 degrees Variomatic speed control, infinitely adjustable from 280 to 2500 rpm via rotary knob at the end of the headstock Integrated spindle indexing device 36 x 10° Spindle lock at the front of the headstock for easy changing of workholding fixtures Blodpfx Asw A Rqfsafoc Double wedge clamp for tool rest and extension arm, particularly slip-resistant and efficient Tailstock with robust trapezoidal thread, 108 mm quill travel with scale, 9 mm through hole

Condition: ready for operation (used), Swing diameter over bed/cross slide: 800mm/500mm, max. turning diameter: 590mm, max. turning length: 650mm, spindle power: 30kW, speed: 2500rpm, bore: 105mm, bearing: 160mm, travel X/Z: 300mm/670mm, rapid traverse X/Z: 12m/min/16m/min, tool positions: 8. Machine dimensions X/Y/Z: approx. 1850mm/2700mm/3100mm, weight: approx. 8500kg, control: Fanuc. The spindle controller constantly goes into overload and is therefore defective. Dokumentation vorhanden. An on-site inspection is possible. Blsdpfexyk T Sox Aafec

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 23165, Used CNC vertical hard turning machine Manufacturer: FELSOMAT Model: FTC 180 Year of manufacture: 2011 Bedjx Tbcaepfx Aafolc Felsomat automation for 23165

Condition: good (used), Year of construction: 2010, machine/vehicle number: 11176, Offer 25439 Bljdpfx Aasyapx Ujfjc Technical data: - Abrasive diameter: 150 mm - Swivel head – grinding unit pivotable and tiltable on articulated arm - Dust drawer - Disc speed infinitely adjustable - Table dimensions: 1400 x 980 mm - Table height approx.: 870 mm - Drive: 400 V / 0.75 kW - Pneumatic connection: 6 bar - Space requirement approx.: W 1700 x H 1700 x D 1300 mm - Weight approx.: 400 kg

Condition: used, Year of construction: 2014, swing diameter 210 mm turning length 210 mm weight of the machine ca. 13 t Feed diameter: 160 mm Workpiece diameter: max. 63 mm Workpiece length: max. 400 mm Blodpfx Aoyan Rioafec Workpiece weight: max. 10 kg Travel distances: X-axis: 340 mm Z-axis: 625 mm Main spindle power: 40%/100%, 34/26.5 kW Torque 40%/100%, 144/112 Nm Speed: max. 6000 rpm Turret tool positions 2 x 11 (1 gripper) Rapid traverse speed X/Z: 30/30 m/min Spindle size: KK5 Circular diameter: max. 210 mm Workpiece diameter: max. 63/100 mm Tailstock pin: MK3, 120 N/bar Stroke: 5 mm Operating voltage: 400V Control voltage DC: 24V Control voltage AC: 230V Frequency: 50 Hz Electrical equipment: VDE 0113

Condition: ready for operation (used), Year of construction: 2017, operating hours: 10,437 h, Main Drive Number of axis 3 Bjdpfxex S Skrj Aafolc Spindle Speed 6000 RPM Spindle motor power 18.1 kW Movement X-Axis Movement 650 mm Z-Axis Movement 375 mm Y-Axis Movement 50 mm This 3-axis EMAG VL2 vertical turning machine was manufactured in 2017. It features a max workpiece diameter of 100 mm, chuck diameter of 160 mm, and a swing diameter of 210 mm. The main spindle offers a power rating up to 18.1 kW and a max spindle speed of 6,000 rpm. Consider the opportunity to buy this EMAG VL2 vertical turning machine. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 1998, 4196 GM 25: Bar feeder year 2001 / GM 25 year 1991 3330 AS 25: Bar feeder year 2001 / GM 25 year 1969, completely overhauled in 1992 4423 GM 26: Bar feeder year 1998 / GM 26 year 1998 4283 GM 26: Bljdpfxox S E Sve Aafec Bar feeder year 2000 / GM 26 year 1995

Year of construction: 2009, condition: ready for operation (used), Main Drive Bsdpsx Sz Dbsfx Aafolc Number of axis 5 Spindle Speed 3000 RPM Spindle motor power 5.5 kW Movement Y-Axis Movement 60 mm This 5-axis MORI SEIKI NL3000Y/1250 was manufactured in 2009. It features a MSX-850 control unit, a 300mm chuck, and a 10-station turret. Capable of a max spindle speed of 3,000 rpm and a rotary tool speed of 6,000 rpm, it's ideal for complex turning tasks. Additional features include a Y-axis movement of +/-60mm and a fully programmable NC tailstock. Contact us for further details regarding this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand FANUC Model Series Oi-TD Main Drive Number of axis 5 Spindle Speed 10000 RPM Spindle motor power 3.7 kW This 5-axis TORNOS Delta 20/5 was manufactured in 2008. It features dual spindles, each capable of handling bars up to 20 mm in diameter and 170 mm in length, with speeds up to 10,000 rpm. Powered by a Fanuc Series Oi-TD CNC and equipped with a Robobar barfeed magazine, this swiss type turning machine is ideal for precision work. Contact us for more information about this machine. Bjdjx Sz A Djpfx Aafslc Application Types Turning

Year of construction: 2005, condition: ready for operation (used), General Data Machine weight 3300 kg Control Unit Brand FANUC Model Series 21i-TB Main Drive Number of axis 2 Bledsx D R Spepfx Aafec Movement X-Axis Movement 185 mm Z-Axis Movement 370 mm This Takisawa TC 200 was manufactured in 2005. It features a standard turning diameter of 225 mm and a maximum of 340 mm. With X-axis movement of 185 mm and Z-axis movement of 370 mm, it also includes a 12-position turret. Consider the opportunity to buy this Takisawa TC 200 horizontal turning machine. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2018, working diameter 140 mm turning diameter 185 mm workpiece length 120 mm control Siemens turning speeds 7.000 U/min Vertical Turning Machine | FAMAR - BISUB 160 2G The machine is in very good condition. Please note that the technical details were added from comparable machines. Bljdpjx Szmpsfx Aafsc - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: BISUB1602G | BISUB160 2G | BISUB-160 2G

Condition: good (used), Year of construction: 2001, Ref. -No.: 10551 Manufacturer: TRAUB Type: TNC 42/65 Year of construction: 2001 Type of control: CNC Control: TRAUB TX Storage location: Halberstadt Country of origin: Germany Machine-No.: 93XXXXX Turning Speeds: 8000 RPM X stroke: 450 mm Turning Length: 450 mm Spindle Speeds: 4000 RPM Bledpfxsx Sw Icj Aafjc Clamping Diameter: 42 / 65 mm Spindle Diameter In Front Bearing: 110 mm Tool Taper: 14 Max. Torque: 170 / 230 Nm Rapid Travel Speed X-Axis: 15 m / min Rapid Travel Speed Y-Axis: 6 m / min Rapid Travel Speed Z-Axis: 30 m / min Dimensions Of The Machine (Lxwxh): 4354 x 2076 x 1917 m Chisel slide cross section turning and milling support: 16 x16 ( 20 x20 ) mm Pressure: 70 bar hydraulic tank: 70 L. Total Power Requirement: 39 kVA Weight Of The Machine Ca.: 5,2 t Feed force X-axis at 100% duty cycle: 5000 N Feed path X-axis: 140 mm Z-axis feed path: 450 mm Y-axis feed path: 35 mm Ball screw Z-axis (Ø x pitch): 32 x 10 mm Ball screw X-axis (Ø x pitch): 32 x 5 mm Ball screw Y-axis (Ø x pitch): 25 x 5 mm Further information: - Revolver 1 Number of branches 10 - Revolver 2 Number of branches 14 - Hecowpkfie Htlx Tfefh - Powered tools Yes

Condition: good (used), Year of construction: 2003, Ref. -No.: 10454 Manufacturer: DOOSAN Type: DAEWOO PUMA 300 MSC Year of construction: 2003 Type of control: CNC Control: FANUC 18i-TB Storage location: Halberstadt Country of origin: South Korea Machine-No.: 0MS19XX Turning Speeds: 4500 RPM Bar passage: 62 mm Turning Length: 595 mm Turret places: 12 Pcs Further information: - 4 axes (X/Z/C/B) Bledpfxox Sw E Ij Aafsc - counter spindle - driven tool station - finished part removal system - conveyor belt - chip conveyor - Powercool coolant system - LNS Quickload Servo 3 bar loader - tool holder - collet holder - collets Machines can be inspected under power by appointment.

Year of construction: 2014, operating hours: 5,316 h, condition: ready for operation (used), Main Drive Spindle speed range 4000 Spindle bore 52 mm Number of axis 3 Movement X-Axis Movement 213 mm Y-Axis Movement ±51 mm Z-Axis Movement 572 mm Turret Tool taper VDI/BOT Tools Blodpfjx D Nzpjx Aafec Number of station 12 This 3-axis HAAS ST-20Y was manufactured in 2014. It features a CNC lathe with C and Y-axis capabilities, a spindle speed of 4000 rpm, and a chuck size of 8 inches. Additional features include a 12-station turret, chip conveyor, and a programmable hydraulic tailstock. Ideal for precision turning operations. If you are looking to get high-quality turning capabilities consider the HAAS ST-20Y machine we have for sale. Contact us for more information about this machine. Application Types Turning

Year of construction: 2020, condition: ready for operation (used), General Data Machine weight 3850 kg Measurements height 1921 mm Control Unit Brand SIEMENS Model SINUMERIK 828D Dimensions Machine Length 2880 mm Main Drive Number of axis 3 Spindle Speed 6000 RPM Spindle motor power 15 kW Bedpfx Aasx D Dkrefelc Movement X-Axis Movement 205 mm Z-Axis Movement 560 mm Y-Axis Movement 105 mm Technical Specification Driven Tools yes This 3-axis DOOSAN LYNX 2100LYA was manufactured in 2020, featuring a chuck size of 6 inches, a maximum turning diameter of 300 mm, and a length of 510 mm. It boasts rapid traverses of 30 m/min on the X-axis and 36 m/min on the Z-axis, with a high spindle speed up to 6000 rpm. Consider the opportunity to buy this DOOSAN LYNX 2100LYA horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2019, operating hours: 14,530 h, Control Unit Brand FANUC Model 31i-Model B Main Drive Number of axis 3 Bedpfx Asx D I Axeafolc This 3-axis Star SR-20J N was manufactured in 2019. It's a Swiss type turning machine designed for precision and efficiency. Ideal for intricate machining tasks, this model offers robust performance in a compact footprint. If you are looking to get high-quality turning capabilities, consider the Star SR-20J N machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2008, condition: ready for operation (used), General Data Machine weight 6300 kg Control Unit Brand FANUC Model 18i-TB Main Drive Bljdpfxsx D H Aqo Aafjc Spindle speed range 3500 Spindle motor power 22000 W Movement X-Axis Movement 245 mm X-Axis Rapid Traverse 22 m/min Y-Axis Movement 102 mm Y-Axis Rapid Traverse 8 m/min Z-Axis Movement 1270 mm Z-Axis Rapid Traverse 24 m/min Additional Equipment Documentation/manual This 3-axis DOOSAN Puma 2500XLY horizontal turning machine was manufactured in 2008. It offers robust performance for precision turning operations. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2500XLY machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2005, operating hours: 6,797 h, Control Unit Brand FANUC Model 21i-TB Additional Equipment Door monitoring / Spindle clamping device for the main spindle / Main spindle indexing 15° (not applicable for 480S) / Work light / Disconnect switch (control current: 30mA, available as an option for 480A) Blodpsx D Sm Usfx Aafec Tool set This Star SB-16 was manufactured in 2005. It features a robust FANUC control system, separate coolant tank, automatic central lubrication, and a 6-station tool holder. Ideal for precision turning, it includes a 4-spindle drill holder and a comprehensive workpiece removal system. Consider the opportunity to buy this Star SB-16 swiss type turning machine. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 1996, General Data Machine weight 2200 kg Measurements height 1700 mm Measurements depth 1200 mm Dimensions Machine Length 2200 mm This 3-axis Star SR 20 R III was manufactured in 1996. It features a max turning diameter of 20 mm, spindle speeds up to 8,000 RPM, and a rapid feed rate of 35 m/min. Ideal for precision turning, it also includes six fixed turning tool stations and five radial driven tool stations. If you are looking to get high-quality turning capabilities, consider the Star SR 20 R III machine we have for sale. Contact us for more information. Bljdpsx D Dwfjfx Aafjc Application Types Turning

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 2200 kg Measurements height 1700 mm Measurements depth 1200 mm Dimensions Machine Length 2200 mm This Star SR 20 J Type C was manufactured in 2011. It features a max turning diameter of 20 mm, spindle speeds up to 8,000 rpm, and a spindle power of 2.2 kW. The machine includes six fixed turning tool positions and five radial motorized tools. Ideal for precision Swiss-type turning, it has a compact footprint of 2.20 × 1.20 m. Contact us for more information about this machine. Application Types Bledpsx D Dwlsfx Aafec Turning

Condition: like new (used), Year of construction: 2025, functionality: fully functional, DEMONSTRATION MACHINE WOODTURNING DAYS 2025 For sale is an as-new HAGER STAR 200 MAX lathe SET with external turning device. The demonstration machine is in very good condition. Technical Data: - Center height 200 mm - Center distance 640 mm (expandable*) - Stepless speed 300 – 2,900 rpm - Hollow spindle D = 15 mm with internal taper MK2 - Tailstock quill travel 100 mm - Motor 2 HP / 400 V (with 230 V plug!) - Weight 124 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Bledownqmkspfx Aafsc Related terms: Lathe, turning machine, woodturning lathe, woodturning, turning chisel, woodturning, turning, machine, Hager Reference: R-A0117 44051+44033

Year of construction: 2003, condition: good (used), Sub-spindle, Y-axis, B-axis SIEMENS 840D Powerline Blodpfxoglf A He Aafoc Turning diameter max 200mm Turning length -635mm Swing Diameter -250mm Spindle speeds main & sub-spindle 20-7000 rpm Turret head 1+2: 12 driven positions B-Axis, upper turret head +135/-45° Misc. accessories MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 2006, total length: 250 mm, Heidenhain display Variable speed drive Bodpfjx Updzox Aafelc Capacity 250x200 mm Internal spindle Price on request