Used Turning Machine for sale (66,697)

Condition: like new (used), DEMONSTRATION MACHINE A Stratos XL demonstration lathe with a center height of 280 mm is for sale. The lathe was only used for a short time for demonstration purposes at Hödnerhof. It can therefore be described as as good as new with full guarantee / warranty. Technical data: - Center height 280 mm - Turning diameter above the bed: 550 mm with optional additional bed (external turning device) up to 1,000 mm! - Center width approx. 780 mm (extendable!) Hodpou Szr Uofx Aa Eefi - Spindle connection M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock with MK2 cone - Frequency converter (3 belt stages): Stage 1: 60 - 1,200 rpm | Stage 2: 100 - 2,200 rpm | Stage 3: 150 - 3,700 rpm - Quill travel 150 mm (with scale) - Tailstock quill with trapezoidal thread and quick-change system (for ER25 drill quill) - Motor 2.2 kW / 3 HP - Weight approx. 320 kg The machine is located at Hödnerhof in A-6341 Ebbs. Subject to prior sale! Pick up address: Hödnerhof Blumenwelt Eichelwang 2 A-6341 Ebbs Related terms: woodturning machine, lathe, lathe, lathe, woodturning, woodturning knife, wood turning, turning, machine Reference: DDSTRATOSXL-VH

Condition: used, Machine vise base plate, clamping plate, vice plate, turntable Hsdpfx Ajfghcusa Eofi -with: T- round groove -Grad display -Dimensions: 235/175/H50 mm -Weight: 6 kg

Condition: used, Machine vice base plate, clamping plate, vice plate, turntable -with: T-round groove -Dimensions: 330/240/H40 mm -Weight: 10kg Hfjdpfx Aasb Hbyco Eei

Condition: excellent (used), !!!DEMO MACHINE!!! For sale: a Drechselmeister MIDI 2 Plus lathe with a center distance of approximately 400 mm. The machine is in very good condition and has been refurbished and inspected by our qualified personnel. (Fully functional) Technical data: - Center height approx. 178 mm / Swing diameter 355 mm - Center distance approx. 400 mm (extendable with optional bed extensions) - Speeds: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 RPM - Spindle connection M33 x 3.5 (MK2 taper) with ASR (Euro) safety groove - Tailstock with interchangeable tailstock spindle 100 mm MK2, trapezoidal thread, and measuring scale! (Optional: interchangeable tailstock spindle with ER25 collet system for drilling) - Motor 1 HP (230 V) with high-quality frequency inverter - Weight approx. 53 kg Hfodszgr Siepfx Aa Eei The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Lathe, turning machine, turning center, woodturning lathe, turning, turning tool, woodturning, turning, machine Reference: R-D1618

Condition: excellent (used), !!!DEMO MACHINE!!! For sale is a Drechselmeister MIDI 3 lathe with a center distance of approximately 400 mm. The machine is in very good condition and has been refurbished and inspected by our specialist personnel. (Fully functional) Technical data: - Center height 190 mm / Turning diameter approx. 378 mm - Center distance approx. 400 mm (extendable with optional bed extensions) - 3 belt stages / speeds: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 rpm - Spindle connection M33 x 3.5 (MK2 taper) with ASR (Euro) drain safety groove Hfjdpfxezgr Nue Aa Eoi - Tailstock with interchangeable quill 100 mm MK2, trapezoidal thread, and scale! (Optional: Interchangeable quill with ER25 collet chuck system for drilling) - Motor 0.7 kW / 1 HP (230 V) with high-quality frequency inverter and “SAFE-START” function - Weight approx. 60 kg The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Lathe, turning machine, turning center, woodturning lathe, turning, lathe tools, woodturning, machining, machine Reference: R-D1618

Condition: excellent (used), !!!DEMO MACHINE!!! For sale is a Drechselmeister Twister XL lathe with a center distance of approximately 800 mm. The machine is in very good condition and has been refurbished and inspected by our qualified technicians. (Fully functional) Technical data: - Center height 250 mm - Swing over bed 490 mm (up to 900 mm with optional external turning attachment!) - Center distance approx. 800 mm (extendable!) - Spindle connection M33 x 3.5 with ASR (Euro) safety groove Hfjdpszgr Hgefx Aa Eji - Spindle and tailstock taper MK2 - Frequency inverter (2 belt stages) 60 – 1,350 rpm and 150 – 3,600 rpm - Quill travel 150 mm (with scale) and trapezoidal lead screw - Motor 1.5 kW / 2 HP - Weight approx. 290 kg The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Lathe, turning machine, lathe machine, wood lathe, turning, lathe tools, wood turning, turning, machine Reference: R-D1618

Condition: used, functionality: fully functional, Genini Miniautomat – automatic lathe Automatic lathe for turning square stock Hsdpfx Aajzgc Rcj Eofi Hydraulic pump motor with a power of 1.5 kW Maximum length of square stock: 950 mm Maximum turning length: 120 mm Maximum turning diameter: 80 mm Two tool posts with profiling tools 1 front spindle for drilling or front profiling 1 roughing tool Machine weight: approximately 1800 kg CE marking

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Solid mm 22 Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Hfjdpfxswlbxls Aa Eoi Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading

Condition: good (used), Code: 0410 Brand: CMC - ITALY Model: LT 1500 Lathe with copying device for wood and similar materials Technical specifications: Max centre distance 1500 mm Centre height 240 mm Max working diameter (without copying device) 450 mm Copying device with manual handwheel feed Gouge rest Tailstock Spindle speed rpm 600/1000/1500/2000 Hedpezc Rmlsfx Aa Eofi Motor power 1,5 Hp three-phase Overall dimensions mm 2430 x 730 x 1230 h Weight kg 340

Condition: used, Year of construction: 2017, working width max. 240 mm Sanding height max. 140 mm weight ca. 2200 kg Hedpfsxwtwujx Aa Eefi

Condition: good (used), Code: 0396 Brand: EINHELL Model: TC - WW 1000 Wood lathe Technical specifications: Power supply 220 Volt Centre distance 1000 mm Turning diameter 280 mm Motor power 350 W N° 4 speeds (890/1260/1760/2600 rpm) Backing pad Tailstock Overall dimensions mm 1500 x 200 x 350 h Weight kg 23 Hfedpezaa Adsfx Aa Eoi

Condition: used, Year of construction: 2014, machine/vehicle number: AH /117836, functionality: fully functional, year of last overhaul: 2025, Equipment: documentation/manual, Ideal machine for edge banding of solid wood panels MACHINING CAPABILITIES: - Panel height (thickness) to be machined: 8 to 60 mm - Router pass: max. 90mm², 0 to 3 mm - Minimum panel length to be machined: 140 mm with an edge thickness >3 mm 200 mm with an edge thickness between 3 and 12 mm - Panel width to be machined: up to 2000 mm - Edge thickness: 0.4 to 3 mm in coil form, up to 12 mm in strip form Hfedpfx Aaszcpixo Eji Panel overhang relative to the chain (part protrusion): min. 30 mm - Edge width: recommended overhang: panel thickness + 4 mm - Feed system (2 feed speeds) 18 m/min for thin edges 12 m/min for strip edges (solid wood) - Distance between parts (depending on feed speed): recommended min. 800 mm MACHINE COMPOSITION: - Unwinding table, useful diameter: Ø780 mm - Electric positioning infeed guide - Chain conveyor belt, work surface height from the ground: 96 cm - Front extension table with rollers (serves as a support up to 2 m) - RT-E sanding unit (edge trimmers or routers) 2 x 4 kW, 9000 rpm - VC gluing unit Infrared preheating of the edge Pre-feeder for EVA granules, indicative consumption 8.5 kg/h "Fastblock" glue pot, pneumatic pre-cutting shear Pressing with 4 rollers, including 1 motorized roller, pressure with electric adjustment - K-SEL end trimming unit Rotation speed: 12000 rpm, motor inclination from 0 to 15° - RFK top/bottom flush trimming unit Rotation speed: 12000 rpm - RI 800 chamfering/flush trimming unit with copy pad Rotation speed: 12000 rpm, spindle inclination from 0 to 25° - GLC compact sanding unit, 1400 rpm Belt: 75 x 2700 mm, inclination from 0 to 5°, adjustable pneumatic pressure - SPN polishing station with textile polishing brush - Motorized operator return, useful width 1 m, with 2 roller tracks, spacing 34 cm Air cushion track and belt conveyor. Arrival height from the ground: 79 cm OTHER CHARACTERISTICS: - General power supply: 400 V, three-phase + N + T, 50 Hz - Installed power: IN 52 A nominal - Pneumatic supply: 8 - 10 bars, dry air, working pressure: 6 bars - Extraction: 6 x Ø50 mm, 1 x Ø80 mm, minimum flow rate 3000 m3/h - CE marking, lockable disconnect switch, emergency stop buttons

Condition: excellent (used), functionality: fully functional, OMA COSBO 120 Grinder for Turned Parts Working length: 1200 mm Hsdpfx Aajy Elw Ee Ejfi Two grinding units Polishing brushes with oscillation Template-based operation

Condition: excellent (used), functionality: fully functional, Genini TBK 70 Automatic Lathe Output square 45×140 mm (approx. 10 pcs/min – 600 pcs/h, with 2 roughing tools – 1 finishing tool) Max. workpiece block: 70×70 mm Min. machinable block: 20×20 mm Max. machinable length: 300 mm Min. working length: 25 mm CE mark Hsdpfx Aaeyxqc Ho Eefi

Condition: excellent (used), Livio Macchia 08 LPT lathe part grinding machine Hfedpfx Aoydn Amea Eji Two grinding units Oscillating polishing brushes Template-guided operation

Condition: excellent (used), functionality: fully functional, Automatic lathe Locatelli Ariete 3 Length of the cant max/min 1000/200mm Dimensions of the cant max/min 85×85/20x20mm Maximum length of the processed material 120mm with a hole 150mm without a hole Hjdpfx Aox Thw Dsa Ejfi Automatic material feeder CE certificate Complete DTR documentation Main engine with a power of 3/4kw Two spindle speeds 2500/3600rpm Oil pump engine 2.2kw Working pressure 6-8bar

Condition: excellent (used), functionality: fully functional, Locatelli MK-CC 1200 Turning Center Turning length: 1200mm Hfsdpfxjyxwpyj Aa Esi Automatic loading of stock material from a feeder 3 Duplomatic floating tool holders, guided by a template 3 upper tool holders with axial movement Option for face drilling in the material Machine control system modernized in 2023 Excellent condition

Condition: repair required (used), functionality: not functional, Intorex TR90 lathe body. Hfedoy Uggtepfx Aa Eei

Condition: good (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 1069, quill travel distance: 1,300 mm, turning diameter over cross slide: 600 mm, total width: 400 mm, total length: 2,300 mm, total height: 1,200 mm, input voltage: 400 V, type of input current: three-phase, Equipment: rotational speed infinitely variable, Wood lathe/turning lathe from 1979 by Jos. Ackermann. Fully functional and in good condition, suitable for series production. Not in use for several years. It is located in the workshop of a medium-sized family business in the Augsburg area. If you are interested or would like more information, please call. Please contact us using the inquiry form here. Hodpfewhlc Hsx Aa Ejfi Utz Carpentry

Condition: excellent (used), functionality: fully functional, Automatic lathe Locatelli OMK300 + UF 150/220 Turning length: 300 mm Maximum square bar: 100x100 mm Minimum square bar: 20x20 mm Hfsdpfxoy R T N Ts Aa Eoi Copy turning operation Drilling transfer UF 150/220

Condition: excellent (used), functionality: fully functional, Genini ROTOUR 100 lathe automatic Hjdpfx Aoy R Abxsa Eofi Max working length: 300 mm Max turning diameter: round Ø 140 mm, square 100×100 mm Spindle motor: 15 HP Spindle speeds: 2050-2800-4100-5600 rpm Pump motor: 3 HP Grinding motor: 0.5 HP

Condition: excellent (used), Year of construction: 2024, DEMONSTRATION MACHINE For sale is a TEKNATOOL Nova Nebula 230 DVR woodturning lathe with a direct drive ranging from 50 to 4,000 rpm. The demonstration machine is in excellent condition. Technical specifications: - Center height: approx. 230 mm - Maximum distance between centers: 680 mm - Spindle thread: M33 x 3.5 with ASR (Euro) safety groove - Spindle and tailstock taper: MT2 (Morse Taper 2) - Infinitely variable speed (direct drive): 50 – 4,000 rpm Hfjdey N R A Ispfx Aa Esi - 24-position indexing system - Motor: 1.7 kW / 2.3 HP (230 V) with forward and reverse operation - Tailstock quill travel: 120 mm (with scale and trapezoidal thread) - Weight: 204 kg - Shipping weight: approx. 225 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Forwarding delivery: Austria: € 105.00 incl. VAT Germany: € 125.00 incl. VAT South Tyrol: € 150.00 incl. VAT Related keywords: woodturning lathe, lathe, turning machine, woodturner, woodturning, turning tools, wood spinning, turning, machine Reference: R-A0117

Condition: excellent (used), NEW MACHINE!!! For sale is a Drechselmeister Twister ECO+ wood lathe with a centre distance of approx. 720 mm. The machine is in excellent condition and has been refurbished and inspected by our professional staff. (Fully functional) Technical specifications: - Centre height 200 mm - Swing over bed 395 mm (can be increased with optional outboard turning attachment) Hedpfsy Nm Tpjx Aa Esfi - Centre distance 720 mm (extendable) - Spindle thread M33 x 3.5 with ASR (Euro) safety groove - Spindle and tailstock taper MK2 - Speeds (2 belt ranges): 60 – 1,350 and 180 – 3,750 rpm - Motor with forward and reverse operation - Tailstock quill travel 100 mm - Motor 1.5 kW / 2 HP (230 V connection) with frequency inverter - Weight of floor-standing version (incl. cast iron legs) 165 kg The machine is located at A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: wood lathe, metal lathe, turning machine, woodturning, turning, turning tools, woodturning machine, machine Reference: R-D1618

Condition: excellent (used), DEMONSTRATION MACHINE!!! For sale is a Drechselmeister Stratos ECO wood lathe with a center distance of approx. 680 mm. Hodoy Nm Rhopfx Aa Esfi The machine is in very good condition and has been refurbished and inspected by our qualified staff. (Fully functional) Technical specifications: - Center height approx. 230 mm - Swing over bed approx. 455 mm (up to 800 mm with optional outboard turning device!) - Center distance approx. 680 mm (expandable!) - Spindle connection M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock taper: MK2 - Spindle speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel 100 mm (with scale and trapezoidal thread) - Motor: 1.5 kW / 2 HP (230 V connection) - Weight: 177 kg The machine is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: wood turning lathe, metal lathe, lathe, wood lathe, turning, woodturning tools, woodturning, turning machine Reference: R-D1618

Condition: excellent (used), For sale is a Drechselmeister MIDI 2 Plus woodturning lathe with a centre distance of approx. 400 mm. The used machine is in very good condition. Technical specifications: - Centre height: approx. 178 mm / max. turning diameter 355 mm - Centre distance: approx. 400 mm (extendable with bed extensions) - Speeds: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 rpm - Spindle mount: M33 x 3.5 (Morse taper MK2) with ASR (Euro) safety groove - Tailstock with 100 mm MK2 interchangeable quill - Trapezoidal thread and measuring scale - Motor: 0.7 kW / 1 HP (230 V) with high-quality frequency converter - Weight: approx. 53 kg The machine is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Hsdey E Il Eopfx Aa Ejfi Related terms: woodturning lathe, lathe, metalworking lathe, wood lathe, woodturning, turning tools, wood turning, machining, machine Reference: R-M61TS