Used Turn Plate for sale (18,663)

Condition: used, Steel floor plates Ljdpfx Afozmw Iistorp Length: 2210 mm Width: 1500 mm Thickness: 260 mm With T-slots in both directions Weight: approx 2 T 3 same plates available.

Condition: good (used), Marble plate STIEFELMAYER Length: 3000 mm Width: 1500 mm Thickness: 350 mm Height on feet: 600 mm Ledpfjzmw H Esx Aftorp Number of feet: 6 feet Weight: approx 4 T It was used as a coordinate measuring marble. 2 same marble plates available.

Condition: good (used), Cast iron marble plate Length: 3500 mm Lrodpezmw Hrsfx Aftop Width: 2500 mm Thickness: 300 mm Height on feet: 900 mm Delivered with 12 leveling feet Weight : 6,3 T

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Precision machining center HSC 30 linear 5 axes Siemens 840D Travel range X/Y/Z 320 /300 /280 mm B-axis: +/- 120° C-axis: 360° Rapid traverse rate 50 m/min Spindle speed range 0 - 40,000 rpm AC main drive with 19.5/15 kW and 16/12 Nm Incl. spindle cooling and rotary union Tool holder HSK-E 40 according to DIN69893 Linear axis drive package Tool magazine, 30 positions, double gripper Active cooling unit for main spindle and linear drives Direct absolute linear encoders 3D control Quick-change system EROWA ITS 150 Measuring probe Blum TC 52 Blum laser Interface for handling system EROWA IKZ 40 bar Electronic handwheel Coolant gun Compressed air Production package Lredpjzlhmmsfx Aftop EROWA Robot Compact 80 50 pallet positions for ITS 148

Condition: used, Original quick-change plates for Dreistern P3.125 profiling systems. Production direction: left to right. The following quantities and sizes are available: 3 pieces for 2 profiling frames (795x790) 3 pieces for 6 profiling frames (2385x790) Lrjdpfsy Sxx Aex Aftep Some of the groove blocks are missing, but can be re-manufactured if required. Price per piece.

Condition: good (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 00820028221, turning length: 800 mm, turning diameter: 500 mm, spindle speed (max.): 20,000 rpm, travel distance X-axis: 490 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 845 mm, mount diameter: 63 mm, workpiece weight (max.): 100 kg, total height: 2,400 mm, total length: 7,000 mm, total width: 2,500 mm, overall weight: 10,000 kg, controller manufacturer: DMG MORI, controller model: ERGOLINE, input voltage: 400 V, input frequency: 50 Hz, input current: 125 A, nominal power (apparent): 74 kVA, operating hours of spindle: 10,397 h, distance between spindles: 1,020 mm, number of slots in tool magazine: 48, Equipment: chip conveyor, documentation/manual, DMG MORI CTX BETA 800 TC CNC turning and milling center - Maximum workpiece diameter: 500 mm - Maximum workpiece offset from the spindle flange: 120 mm - Travel distance X1: -10/+490 mm - Travel distance Y1: +-100 mm - Travel distance Z1: 845 mm - Travel distance Z2: 600 mm - Travel distance Z3: 800 mm - Tool holder: HSK 63 The machine is equipped with a tailstock, a main spindle, and a milling head. Includes the tool holders in the tool changer, as well as a chip conveyor, coolant system, and filter extraction. Lrsdpfxozlghce Aftop Note: The item must be picked up on a date to be determined between October 7th and October 14th, 2026. FCA D-35576 Wetzlar – loaded onto a truck.

Condition: new, Year of construction: 2025, Protec KT 3000 HV, hydraulically adjustable in height Load capacity: 3000 kg Handheld remote control with digital display Dual-pedal remote control Height: approx. min. 700 mm when tilted to the center, max. 1400 mm Diameter of the turntable: 1400 mm Lrsdpoifw Hdjfx Aftsp Tilt angle: min. 135° Speed: 0.05 to 0.9 rpm Motor power: 3 kW

Condition: used, functionality: fully functional, 4 pieces of Matsuura H-Plus 630 machine pallets, 800 x 800 mm, with hydraulic feed Ledoxn R Skspfx Aftsrp

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: plate roll, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: MG EVO, controller model: EVO 4 AXIS, number of rollers: 4, roller (bottom) diameter: 140 mm, roller (top) diameter: 160 mm, side roll diameter: 150 mm, roller diameter: 200 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 700 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, overall weight: 2,200 kg, total length: 3,200 mm, total width: 1,100 mm, total height: 1,200 mm, power: 4 kW (5.44 HP), input voltage: 400 V, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BRAND MG ITALY, HYDRAULIC MODEL M2006P EVO_CNC PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BENDING CNC_EVO PROGRAMMABLE AUTOCALCULATION AUTOMATIC PLATE ROLLING Capacity: -Width of plate: 2000 mm -Thickness of plate rolling 6 mm -Thickness of plate pre-bending 4 mm Rolls -useful width mm. 2050 -Top roll mm. 160 - Lower roll mm. 140 Configuration installed: • Surface hardening of the four rolls, smooth finishing suitable for stainless plates rolling • Dual pre-pinch, with adjustable force upon the input of plate thickness • Conical bending hydraulic attachment - hardened contrast pad. Lrjdjw Dnd Sspfx Aftep • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system for re-rolling of welded shells rounding. • Console electric independent with centralized commands joysticks and CNC screen readout. • CNC controller on touch screen 15” , CAD/CAM interface 4 axis auto calculation software package. with digital readout of the axis for use in manual rolling, semiautomatic and fully automatic programmable. • Opening front side hydraulic drop-end to unload closed shells. • Variable working speed step-less axis interpolation. • Safety installation with emergency stop. • Instruction manuals for operation and service.

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, straightening plate, scribing plate, test plate, inspection plate, precision measuring table -Mounting plate: Test plate with support ribs Lrjdpfx Afozldm Njtop -Clamping surface: 300 x 200 mm -Sheet thickness: 10 mm -Plate: with supporting ribs -Transport dimensions: 446/200/H74 mm -Weight: 11 kg

Condition: excellent (used), Year of construction: 2018, Sub-spindle, Y-axis, C-axis FANUC 31i B-NT-SmartX control Turning diameter max 225 mm Turning length -656 mm Chuck Diameter -210 mm Main-spindle speeds 4'500 rpm Sub-spindle speeds 6'000 rpm Ledpsvwkirofx Afterp Turret head 1+2: 24 positions with 12 driven positions each Robot for workpiece loading Tool presetting device Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 2760174, (Please provide us with your offer price.) Several units are available and are part of a process chain. Lodpsyiaruefx Aftjrp Sales only within Europe, including Turkey. Price excludes packaging; delivery condition: FCA (machine location). ===== Technical data can be found in the attached handout. All warranty rights are excluded. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations. No sales to private individuals.

Condition: good (used), Year of construction: 1990, functionality: fully functional, Traub CNC turning center TNA480, TX8D, year of manufacture 1990, serial number >550. C-axis, rotary tool drive, 1 turret VDI40, tailstock, chip conveyor, hollow cylinder chuck, 3-jaw chuck KNCS315. Good condition, ready for operation. Machine geometry has been checked and corrected/adjusted. Scrapers and belts have been inspected, replaced, maintenance performed after 4000 operating hours. Lrjdozcdgfepfx Aftop The photos were taken in the production environment; the machine will be cleaned and inspected further. The machine can be inspected while powered on.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Traub CNC turning machine TNC65DGY, TX8I, year of manufacture 2005, serial number 113* Y-axis on S1, V-axis, 2x C-axis, 2 rotating tool drives, 2 turrets VDI30, Hainbuch BZI65 on main and counter spindle, parts gripper, without loading magazine. Very well maintained, in good condition, maintenance performed. Machine geometry has been checked and corrected/adjusted. Machines can be inspected while powered up – or a video is available. Lrjdszfkbajpfx Aftop Approximately 4 weeks after order. Warranty of 6 months on main components as follows: Spindle bearing, ball screws, linear guides, clamping cylinders. The warranty expressly applies only to the replacement parts, not to downtime or labor time, or travel time. The warranty expressly does not apply to other parts than those mentioned above, e.g. wear parts, electrical components, electronics, hydraulics, etc.

Condition: good (used), Year of construction: 2009, Parts shown by hand not come. Ledpfx Afszlbzqetsrp Technical details are shown on pictures.

Condition: used, Year of construction: 2003, functionality: unexamined, turning diameter over cross slide: 455 mm, turning length: 1,000 mm, turning diameter: 680 mm, spindle bore: 107 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 4 rpm, travel distance X-axis: 320 mm, travel distance Z-axis: 1,097 mm, spindle motor power: 30,000 W, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, GILDEMEISTER CTX 600 / CTX 620 CNC – CNC Lathe – Fully Functional – Chip Conveyor Lrodjzmqdkopfx Aftjp For sale: a GILDEMEISTER CTX CNC lathe (exact model to be confirmed from the nameplate). The machine comes from a production plant that is being shut down. It operated until the end of the company's operations and was dismantled from the active production line. It is complete and sold in the condition it was taken from. Equipment: * Heidenhain control, * tool turret, * hydraulic tailstock, * hydraulic chuck, * chip conveyor, * cooling system, * full safety enclosure. Approximate parameters: * max. turning diameter: approx. 680 mm, * turning length: approx. 1000 mm, * spindle bore: 107 mm. The machine is available immediately. Loading is possible after prior arrangement.

Condition: used, Year of construction: 2001, Used machine Year of manufacture 2001 Equipment and technical data: - Cutting length 4300 mm - Cutting height vertical 2150 mm, horizontal 2100 mm - Cutting depth max. 60 mm - Saw blade diameter 250 mm; bore 30 mm - Motor 4 kW - Rotation 5100 rpm - Material support with rollers - Fixed support elements for secure positioning of the workpieces - Centre support: sturdy support elements at working height, individually manually foldable - Dimension read-out for: - horizontal saw cuts via scale - horizontal saw cuts via strip stop from 50-500 mm - vertical saw cuts via stop from 0-1300 mm - Compressed-air connection for pneumatically retracting slatted frame (required air pressure: 6 bar) Lrodpfx Aszlbp Ieftsp - Scoring system: via double cut of the main saw blade: the plunge depth of the saw blade is limited by simply adjusting a stop, so that the saw blade scores the workpiece in synchronised rotation Availability: at short notice Storage location: Röllbach

Condition: excellent (used), short taper mount: 6 mm, Faceplate (28618) Diameter 350 mm Short taper KK 6 mount Diameter 106.39 mm T-slot width 16 mm Jaws are screwed on Faceplate height 98 mm without jaws with jaws 158 mm 4 M 12 studs Pitch circle diameter 133.4 mm Lrodpfx Afswf Hkmotep

Condition: excellent (used), Year of construction: 2006, operating hours: 6,500 h, functionality: fully functional, turning length: 600 mm, turning diameter: 320 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 250 mm, travel distance Z-axis: 600 mm, bar diameter (max.): 60 mm, Equipment: rotational speed infinitely variable, CNC turning and milling center GILDEMEISTER CTX 410 V3 Year of manufacture: 2006 Control system: Heidenhain Operating hours: 6,500 hours Technical data: Main spindle speed: 20 - 5,000 rpm Drive power: 21 kW Torque: 420 Nm Travel distances: Ljdezmp Alspfx Aftorp X-axis: 250 mm Z-axis: 600 mm Turret: 12 stations Tool holder: VDI 30 Drive power: Speed: Accessories: - Coolant system - Chip conveyor - 3-jaw chuck - Various tool holders

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Model: SL 100 Machine No.: 5372 Lrsdpoyuty Sofx Aftep Column-type machine Chain mortising unit Door support Workpiece support Spindle for lever hole Spindle for faceplate Lubrication device Extraction port D 80/100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Location: 54634 Bitburg Delivery in as-inspected condition, without warranty or guarantee

Year of construction: 2026, condition: new, NEW – - Ideal for removing sheets from your vertical sheet storage system. - For internal transport of sheets to a vertical or horizontal sheet dividing saw. - The continuously adjustable support surface can be precisely adjusted to the height of your sheet saw. - Sheets weighing up to 250 kg can be transported or pivoted by a single operator. Technical data: Support height - vertical: approx. 120 – 340 mm - horizontal: approx. 890 – 1200 mm Maximum sheet size: 5200 × 2100 mm Lredpfed Tyaaox Aftsp Load capacity: 250 kg Location: In stock at 54634 Bitburg - immediately available - Will be shipped within Germany for €90.00 net.

Condition: new, Year of construction: 2026, TBS – Manual Sheet Metal Shears Manual sheet metal shear Suitable for cutting construction steel, aluminum, copper, zinc, and plastic High-quality steel cutting blades with a hardness of HRC55-60 Equipped with two operating handles Features a front support surface with a scale and an adjustable rear stop 800 mm table height Scope of delivery: 2 operating handles Lrodpfx Ajcnxc Roftop Model TBS 2000-12 Item No. 3746020 Technical data Working width max. 2000 mm Sheet metal thickness max. - material tensile strength 400N/mm² 1.25 mm Rear stop range 0-300 mm Weight 511 kg Dimensions in mm 2450 x 1100 x 1050 mm

Condition: good (used), Year of construction: 2005, Marking and surface plate 1000 x 1000 with base frame Lrsdowqx Axopfx Aftep Location: from stock 54634 Bitburg - available immediately -

Condition: used, Year of construction: 2011, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS IV greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Lsdpfezk U Rpjx Aftsrp Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Chip conveyor Coolantsystem C-axis in main and sub spindle part counter total counter tool setting Overhead partsgripper with conveyor belt. Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. The robot cell has been diemanteled, it is now a stand alone machine. A bar feeder can be added. *

Condition: good (used), machine/vehicle number: T61599, TORNOS DECO 10, serial number T61599, 9-axis, equipped with a TORNOS ROBOBAR automatic bar feeder, additional tray, lathe cleaned and in working order. Ljdezk Ug Dopfx Aftjrp