Used Turn Plate for sale (20,079)

Condition: good (used), Year of construction: 1983, Spindle diameter: 200 mm Machining width: 6000 mm Machining height: 3150 mm Max. machining depth: 1985 mm Slide cross section: 530 x 550 mm Table load capacity: 20 t Plate field size: 11200 x 5550 mm Tool holder: SK 60 Machine weight approx.: 173 t Additional information: - Additional equipment: large and small angular heads - Listing No.: 22979 - The table is model S20 MP, size: 2200 x 2500 mm - The machining width on the X-axis of the machine is 6000 mm - Including 6 plates measuring 5600 mm x 1850 mm Gujdjz Akb Iopfx Ak Usg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter: 20 mm, spindle motor power: 5,500 W, spindle speed (max.): 8,000 rpm, spindle bore: 25 mm, travel distance X-axis: 50 mm, travel distance Y-axis: 350 mm, type of input current: three-phase, bar passage: 20 mm, overall weight: 4,200 kg, spindle diameter: 20 mm, Equipment: documentation/manual, rotational speed infinitely variable, Steuerung: Fanuc 310i Hauptspindel Drehzahl: 10.000 U/min Leistung: 5,5 kW Drehmoment: 14 Nm Stangendurchlass: max. 20 mm C1-Achse: 0,001 Verfahrweg Z1-Achse: 80 mm Gegenspindel Bjjgsn8yaky Drehzahl: 10.000 U/min Leistung: 5,5 kW Drehmoment: 14 Nm C2-Achse: 0,001 Verfahrwege X2 / Z2-Achse: 240 / 300 mm Eilgang in X2 / Z2 Achse: 40 m/min Werkzeugträger I (X/Y) Technologie: Linearer Schlitten Innenbearbeitung: 6 Stationen Werkzeughalter: 20 mm Außenbearbeitung: 6 Stationen Werkzeughalter: 12 x 12 mm Angetriebene Werkzeugstationen: 5 Godpfx Akszz I Dkj Ueug Werkzeugantrieb: 3.450 / 6.000 U/min Werkzeugaufnahme: Spannzangenfutter, ESX 16 Verfahrwege in X/Y-Achse: 50/350 mm Eilgang in der X/Y-Achse: 40/30 m/min Stangenlader BOSS 332 E Werkzeugträger II (Y) Technologie: Linearer Schlitten Innenbearbeitung: 4 Stationen Werkzeugaufnahme: 20 mm Außenbearbeitung: 4 Stationen Werkzeughalter: 12 x 12 mm Angetriebene Werkzeugstationen: 5 Werkzeugantrieb: 3.450 / 6.000 U/min Werkzeugaufnahme: Spannzange, ESX 16 Verfahrweg in Y2-Achse: 120 mm Eilgang in der Y2-Achse: 40 m/min DETAILS ZUR MASCHINE Gewicht: 4200 kg Angeschlossene Last: 30 kVA Betriebsspannung: 400 V / 50 Hz AUSRÜSTUNG Spänemanagement: Späneförderer Kühlmittelmanagement: Kühlmittelpumpe Weitere Ausstattung: Signallamp

Condition: used, Bed plate 10ft x 5 ft x 4000kgs (approx) - Matched Pair Gedpfxjywziuo Ak Usug

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm Gujdpfxewk Rlxe Ak Ujg max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: used, Year of construction: 2014, CNC lathe, 2 axes, Victor V-turn A20 (SV), Taiwan Gujdezhk Uxjpfx Ak Ueg Year of manufacture: 2014 Control system: Fanuc OiTD with Manual Guide Chuck diameter: 210mm Spindle bore: 52mm Tool turret: 12 positions, VDI30 Turning length: 600mm Turning diameter: 390mm Maximum spindle speed: 5000 rpm Measuring probe: Renishaw Tailstock: MT4 Interface for bar feeder Chip conveyor Coolant tank with pumps Documentation

Year of construction: 2021, operating hours: 900 h, condition: like new (used), functionality: fully functional, spindle diameter: 200 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, Equipment: documentation/manual, Mazak Integrex J200s Year 2021 Control unit: Smooth G Distance between spindles: 1000 mm Maximum machinable diameter: 500 mm Maximum bar capacity: 65 mm X-axis travel: 450 mm Y-axis travel: 200 mm / +- 100 mm Z-axis travel: 960 mm Gujdpfszz Rt Ujx Ak Ujg Maximum spindle speed: 4000 rpm Spindle taper: A2/6 Spindle bore (main spindle): 76 mm Tool magazine capacity (automatic tool changer): 36 Capto Chip conveyor: Mayfran belt type

Condition: used, Year of construction: 2006, turning length: 1,298 mm, turning diameter: 356 mm, spindle speed (max.): 4,000 rpm, controller model: MORI SEIKI MSX 850III / MAPPS III, center width: 1,250 mm, TECHNICAL DETAILS Maximum turning diameter: 1,250 mm Maximum turning length: 1,298 mm Maximum turning diameter: 356 mm Standard turning diameter: 275 mm Swinging diameter over bed: 923 mm X-axis travel: 260 mm Z-axis travel: 1,345 mm Maximum spindle speed: 4,000 rpm Spindle bore: approx. 80 mm Number of turrets: 1 Number of tool positions: 12 MACHINE DETAILS Control system: MORI SEIKI MSX 850III / MAPPS III Dimensions & Weight Dimensions (L x W x H): 5,000 × 2,300 × 2,400 mm Machine weight: 7,600 kg Gjdpfx Aszwgquek Ueug EQUIPMENT IRCO SIMAG loader magazine Chip conveyor Powered tools C-axis Y-axis

Condition: good (used), Year of construction: 2008, XYZ Compact Turn 52 CNC lathe with barfeeder Year: 2008 Technical details: Bar Capacity 52mm Chuck Size 150mm (6") Control Siemens 810D Shopmill Distance Between Centres 280mm Maximum Cutting Diameter 220mm Maximum Cutting Length 280mm Rapid Feedrates 20m/minute Spindle Motor Power 20Hp Spindle Nose A2-5 Spindle Speed 5000rpm Swing diameter 400mm Swing Over Carriage 400mm Tailstock Quill Diameter 60mm Tailstock Quill Stroke 90mm Tailstock Taper MT4 Tool Size 20 x 20mm Tooling Configuration VDI 30 Turret Positions 12 X axis Travel 185mm Z axis Travel 325mm Machine Dimensions 2531 x 1778 x 1720mm Machine Weight 2590kg Accessories/options: - LNS servo barloader - Foot pedal for chuck operations - Parts catcher - Renishaw tool setter - Tailstock - VDI 30 tool holders - Swarf conveyor - Documentations Gusdozg Intjpfx Ak Ueg Under power in our warehouse, possible to test it anytime!

Condition: used, Year of construction: 2005, turning length: 705 mm, turning diameter: 356 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, controller model: MORI SEIKI MSX-850, TECHNICAL DETAILS Turning diameter: max. 356 mm Standard turning diameter: 275 mm Turning length: max. 705 mm Travel in X-axis: 260 mm Travel in Y-axis: ±50 mm Total travel in Y-axis: approx. 100 mm Travel in Z-axis: approx. 795 mm Rapid traverse rate X/Y/Z: 30 m/min Tool stations: 12 MACHINE DETAILS Guedpfx Akszwgwzj Ueg Design: SY with Y-axis Control system: MORI SEIKI MSX-850 Bar feed magazine: LNS Quick Load Servo 2 Bar length: max. approx. 1,500–1,600 mm / 63″ EQUIPMENT Tailstock Driven tools Y-axis LNS Quick Load Servo 2 bar feed magazine

Condition: excellent (used), functionality: fully functional, X = 1020 mm Y = 510 mm Z = 460 mm ATC 30 Table size: 1200 x 500 mm Machine dimensions: 3000 x 2800 x 2800 mm Machine weight: 7,300 kg Guodpfx Akoz Ap R Us Ujg

Condition: ready for operation (used), Year of construction: 2020, operating hours: 7,597 h, functionality: fully functional, machine/vehicle number: NL257200651, turning diameter: 366 mm, spindle speed (max.): 4,000 rpm, controller model: Mitsubishi 730UM CELOS, working length: 700 mm, number of slots in tool magazine: 12, TECHNICAL DETAILS Maximum machining length: approx. 700 mm Maximum turning diameter: 366 mm Workpiece length with tailstock: max. 728 mm Spindle speed: max. 4,000 rpm Tool turret: 12-position BMT60 star turret Tool drive: 40 / 14 Nm Speed of driven tools: max. 10,000 rpm Overhang length of driven tools: 100 mm Chuck: 10" hollow chuck, Ø 254 mm Chuck cylinder: hollow chuck cylinder BB210A821 Gjdpfszy Hx Djx Ak Ujug Tailstock: NC tailstock Tailstock taper: MK 5 MACHINE DETAILS Coolant type: water-miscible coolant / emulsion Coolant pressure: 5 bar Extraction connection: Ø 150 mm Mains voltage: 380 V Frequency: 50 Hz Transformer power: 45 kVA Phases: 3 phases Isolation transformer: 400 V ± 5 % Current: 65 A Control system: Mitsubishi 730UM CELOS User interface: CELOS with ERGOline touch panel Machine operating time: 7,597 h Program runtime: 2,138 h Last maintenance: April 2024 Weight: 5,800 kg EQUIPMENT DMG MORI M730UM control system with CELOS ERGOline touch panel 12-position BMT60 star turret with driven tools 10" hollow chuck, Ø 254 mm Hollow chuck cylinder BB210A821 Double foot switch with protective cover NC tailstock with MK-5 mount Oil-air cooler for circulating spindle coolant Hinged belt chip conveyor High-pressure coolant system, 5 bar Oil mist separator AFS 1100 including interface Manual, swiveling tool pre-setter SCHNEIDER transformer 45 kVA Technology cycle "Alternating Speed" Further technical data can be found in the document attached!

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Gjdpfezzyt Dox Ak Usug Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Maximum turning diameter: 650mm, Maximum Machining length: 863mm Guodpsz Api Defx Ak Uog X345 Z900mm, live tooling, C-axis, spindelbore 130mm. MSC 501 (Fanuc)

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 420 mm, feed length W-axis: 900 mm, spindle diameter: 130 mm, table load: 15,000 kg, table length: 2,000 mm, table width: 1,800 mm, Union GERA BFP 130 CNC milling machine with Heidenhain 355 control, mechanically refurbished in 2019, in excellent condition, including base plates. Travel in X-axis: 7,000 mm Travel in Y-axis: 2,500 mm Travel in Z-axis: 420 mm Table load capacity: 15,000 kg Spindle diameter: 130 mm Table length: 2,000 mm Guedpfx Ajz Ahqyek Ueg Table width: 1,800 mm Travel of W-axis: 900 mm

Condition: used, Year of construction: 2001, turning diameter 220 mm Control Fanuc 18i x-travel 390 mm z-travel 435 mm tool taper VDI 40 number of tool places 12 Pos. spindle tunring speed 4.500 U/min The machine is untested and is being sold for spare parts. Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Gujdpfx Akezz S R Io Uog Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, functionality: fully functional, machine/vehicle number: 2550X10.14MM, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 800 mm, sheet thickness (max.): 14 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, 3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Gujdpfx Aoy Aubusk Uog Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 280 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop

Condition: excellent (used), Year of construction: 2006, operating hours: 11,533 h, travel distance X-axis: 8,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 2,500 rpm, feed length W-axis: 800 mm, spindle diameter: 160 mm, table load: 80,000 kg, table length: 8,000 mm, table width: 4,000 mm, overall weight: 65,000 kg, grinding spindle motor power: 41 W, Equipment: rotational speed infinitely variable, JUARISTI MX-7 RAM CNC – CNC BORING AND MILLING MACHINE, FLOOR-MOUNTED DESIGN Manufacturer: Juaristi Model: MX-7 RAM Year of Manufacture: 2006 CNC Control: Heidenhain iTNC 530 Travel Ranges - X-axis: 8,000 mm - Y-axis: 4,000 mm - Z-axis (RAM / Slide): 1,000 mm - W-axis (Spindle Stroke): 800 mm Mounting Plates / Base Plates - Mounting Surface: 8,000 × 4,000 mm - Maximum Table Load: 80,000 kg Main Spindle - Spindle Diameter: 160 mm - Tool Holder: SK 50 (ISO 50) - Main Motor Power: 41 kW - Maximum Torque: 2,024 Nm - Spindle Speed Range: - 5–1,182 rpm (low speed range) - 1,182–2,500 rpm (high speed range) CNC & Drives - CNC Control Heidenhain iTNC 530 - Siemens Feed Motors - Absolute Heidenhain Measuring System Tool and Head Equipment - Automatic Tool Changer (ATC) with 30 positions - Automatic clamping system for RAM accessories - Manual swivel head Cooling System - Internal cooling through the spindle - External cooling system Mechanical Equipment - Hydraulic-electronic RAM compensation system - Independently vertically adjustable operator platform - Chip conveyor - Complete enclosure / complete protective guard Guedpfx Akoz Aplro Ueg Documentation - Complete original machine documentation available

Condition: good (used), Year of construction: 2017, Max. turning diameter 366 mm Max. turning length 510 mm Bar capacity Ø 65 mm Travel ranges X / Y / Z 260 / 100 / 590 mm Main spindle 5,000 rpm Counter spindle 6,000 rpm Driven tools 10,000 rpm · 29 Nm Turret 12 stations, BMT Controlled axes X, Y, Z, C, B Machine weight 5,500 kg Connection current max. 115 A - Y-axis milling off-center, complete machining in a single setup - Counter spindle with synchronized transfer – machining the back side without re-clamping - Built-in motor turret (BMT) drive in the turret, stiffer and more thermally stable than VDI systems - Tool measuring probe for both spindles - Bar loader LNS Quick Load Servo 65 for bars up to Ø 65 mm, unmanned series production - Parts catcher and parts conveyor for gentle parts removal - Chip conveyor, high-pressure coolant supply - CELOS with ERGOline 21″ touch control panel Machine running time approx. 14,100 hours Program running time approx. 9,900 hours Guodpfx Aezy U Nwsk Ujg Machine price excluding shown accessories (extensive accessories can be purchased separately) Errors and prior sale excepted. The machine can be inspected under power with short notice.

Condition: used, Year of construction: 2011, bar material dia. 16 mm spindle passage 20 mm turning length 200 mm turning speeds 15000 U/min c-axis 0,001 ° gripping station 16 mm turning length 80 mm turning speeds 15000 U/min positive location each 0,001 ° Gedoz Alalepfx Ak Usug number of tools 23 total number of milling stations max. 12 control Mitsubishi MELDAS Number of axles 7 St. Number of working hours 25183 h total power requirement 3,7 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,1 x 1,7m plus FMB swiss type machine Citizen K1&E-VIIP, built 2011, with FMB Minimag 20 Excellent conditions!From precision engineering company.

Condition: used, Year of construction: 2022, Model: PUMA 2600SY II Year: 2022 Swing over bed: 780 (680) mm Swing over cross slide: 630 mm Recommended turning diameter: 255 mm Max. turning diameter: 376 mm Max. turning length: 760 mm Bar capacity: 76 mm Optional bar capacity: 81 mm Main spindle speed: 4,000 rpm Main spindle nose: ASA A2-8 Main spindle bore: 86 mm C-axis main spindle: 0.001° Sub-spindle speed: 6,000 rpm Sub-spindle nose: ASA A2-5 Sub-spindle bore: 62 mm C-axis sub-spindle: 0.001° Turret tool stations: 12 [24] External turning tools: 25 [20] mm Boring bar diameter: 40 [32] mm Turret indexing time: 0.15 s Driven tools: max. 5,000 rpm X-axis travel: 260 mm Guodezz Hkispfx Ak Uog Z-axis travel: 830 mm Y-axis travel: 105 mm (±52.5 mm) Main spindle motor: 22 / 15 kW Sub-spindle motor: 15 / 11 kW Driven tools motor: 7.5 / 1.5 kW Coolant pump: 0.4 kW Machine height: 2,163 mm Machine length: 3,505 mm Machine width: 2,005 mm Machine weight: 6,550 kg Footprint: approx. 3400 x 1800 x 2600 mm

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 107731, Equipment: cooling unit, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Gujdpfozzc U Dex Ak Ujg Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 15 h, machine/vehicle number: 121282, BENDMAK PRO 120 – Hydraulic three-roll profile and tube bending machine | 2024 | only 15.5 hours of use We offer a nearly new hydraulic three-roll profile and tube bending machine, BENDMAK PRO 120, manufactured in 2024. The machine has been used only minimally. The control system currently shows only 15 hours and 27 minutes of machine operating time and 31 hours and 14 minutes of hydraulic operating time. Operating times can be verified directly on the machine's display – see photos. The machine is fully functional, in very good technical condition, and ready for immediate use. The sale includes an extensive set of interchangeable rolls/tools for bending various profiles and tubes, as shown in the photos. Technical data: Manufacturer: BENDMAK Model: PRO 120 Year of manufacture: 2024 Serial number: 121282 Machine operating hours: 15:27 h Hydraulic operating hours: 31:14 h Type: hydraulic three-roll profile bending machine Shaft diameter: 120 mm Working roll diameter: 390 mm Motor power: 11 kW Power supply: 400 V / 50 Hz Weight: 4,720 kg CE Equipment and accessories: hydraulically controlled lower rolls hydraulic side guide rolls drive for all three rolls separate mobile control panel touchscreen display multiple sets of interchangeable rolls/tools for various profiles and tubes accessories shown in the photos are included in the sale Guodpjzzkvpofx Ak Ueg The machine can be inspected and demonstrated in operation on-site.

Condition: excellent (used), Year of construction: 2017, Sub-spindle, Y-axis, C-axis, B-axis FANUC 31i B5 NT-Smart control Turning diameter max 6400 mm Turning length -1150 mm Y-axis +/- 125 mm B-axis 1100 mm Main-spindle speeds 3'500 rpm Sub-spindle speeds 3'500 rpm C-axis positioning accuracy 0.001° Milling head B-axis -120 / +105 ° Spindlespeeds 12'000 rpm Tool changer 120 positions Barloader IRCO ILS-Muk-10016II Workpiece pick-up attachment Tool breakage control device 3D measuring tracer Misc. accessories Godpfjzz I N Tox Ak Usug MARCELS MASCHINEN CH

Condition: like new (used), Year of construction: 2016, functionality: fully functional, 1 used Petschauer PLT800 Manual machine for re-grinding the seat of carbide saw teeth, with a cutting-off device for carbide saw blades that require repair, with a diameter of 100 to 800 mm, where the carbide teeth are soldered on too long. This machine is equipped with a double grinding wheel holder and a double saw blade holder for 2 different applications. Right side: Re-grinding the seat after desoldering, using a 175 mm diameter and 4 mm wide ceramic grinding wheel, with an adjustment scale from 15° negative to 35° positive, and blade thickness adjustment. Left side: Cutting off carbide teeth that are soldered on too long, using a 150 or 175 mm diameter and approximately 1 mm wide diamond cutting disc. Adjustment scale for rake angle, 15° negative to 35° positive. The cutting-off process takes place at a 0° blade angle. Additional applications: Setting the tooth back Setting the chamfer on TCT saw blades Face grinding with the help of a diamond grinding wheel Re-sharpening on the circumference of the saw blade at 0° Alternate tooth arrangement possible. Technical data: Saw diameter: Max. 800 mm Weight without stand cabinet: 128 kg Dimensions: Width: 92 cm Depth: 72 cm Height: 58 cm Total power: 0.75 kW Drive speed: 2600 rpm Gedpfxjzz Rlko Ak Usug Coolant tank: 60 liters Dimensions: Ceramic grinding wheel 175 mm Diamond cutting disc: 150 or 175 mm Operating voltage: 230/400 volts, 3 phases, 50 Hz or 230/440 volts, 3 phases, 60 Hz Fuse protection: 3 slow-blow fuses 10 A

Condition: good (used), Year of construction: 2010, functionality: fully functional, MAZAK QT Nexus 200M Year 2005 FUSION 640Mt Maximum swing 640 mm Max working diameter 380 mm Maximum workable length 600 mm Bar capacity 65 mm Self-centered dimensions 210 mm Spindle speed 6000 rpm. Spindle nose Asa 6 Spindle speed (driven tools) 5000 rpm. Cone (tailstock) 4 cm Main spindle motor 26 Kw Coolant tank (coolant) 300 l Machine without bar feeder Gujdpfx Aoivpx Hok Uog