Used Trumpf Lasercell 1005 for sale (409)

Condition: good (used), functionality: fully functional, Year of construction: 2013, operating hours: 84,004 h, laser power: 3,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, Equipment: safety light barrier, Working range: X = 3000 mm / Y = 1300 mm / Z = 600 mm B = +/- 135° C = n x 360° Standard configuration: - Fixed pendant control panel - Teach panel - Teach software - TruDisk 3001 solid-state laser Itsdpfx Aerb Dg Nsffjr - Air cooler Cooling and pilot laser (switch) - LLK with 30 m - Prepared for laser cutting - Cutting gas: nitrogen - Dynamic cutting optics with f = 150 mm - Magnetic coupling - FocusLine - Control: Siemens Sinumerik 840 D (open control on PC basis) - Network card Special configuration: - MDE interface - FastLine Cell - ObserveLine - Rotation changer D = 4000 mm incl. rear step protection - Scrap conveyor belt - 4 x configurable control interface - Valve terminal for 8 pneumatic clamps per side - 2 x loading status light for rotation changer - 3 x horizontal pre-crushing interface - Protective cabin for rotation changer incl. light curtain, protective grille and signal light - Status lights below and above - Video surveillance with camera and monitor holder - incl. extraction system

Condition: ready for operation (used), Year of construction: 2010, This TRUMPF TruLaser Cell 7040 was manufactured in 2010. It features a CO2 laser cutting system with extensive travel ranges: X-axis up to 4000mm, Y-axis up to 2000mm, and Z-axis up to 1000mm. Maximum travel speeds reach 173 m/min, enhancing productivity. It includes a 60 GB hard drive and supports ELA USB and Network programming on Windows 7. For more information about this machine, please reach out to us. Application Types Iedpfx Afex D I U Isfetr Cutting

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, machine/vehicle number: S2321M0007, laser power: 400 W, This TruLaser Cell 3000 is used to cut parts out of coil, in thin sheet-thicknesses. It has an automatic feed of the material in the lasercel. The machine is visible in production. Itsdpfxox Hiy Ho Affsr

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 94,936 h, controller manufacturer: Siemens SINUMERIK 80 D, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 100 m/min, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working Area X-axis: 3,000 mm Y-axis: 1,300 mm Z-axis: 600 mm B-axis: ±135° C-axis: n × 360° Speeds X / Y / Z axes: 100 m/min B / C axes: 540 °/s Acceleration Simultaneous: 17.3 m/s² X / Y / Z axes: 10 m/s² B / C axes: 200 | 100 rad/s² Maximum Positioning Accuracy Linear axes X / Y / Z: 0.03 mm Rotary axes B / C: 0.005° Maximum Positioning Deviation Linear axes X / Y / Z: 0.08 mm Rotary axes B / C: 0.015° MACHINE DETAILS Laser type: Solid-state laser TruDisk 3001 Laser power: 3,000 W Itodpox Dkymsfx Affer Cutting gas: Nitrogen Control: Siemens SINUMERIK 80 D Operating Hours "Laser On" hours: 94,936 h Total operating hours: 99,293 h EQUIPMENT Magnetic coupling Dynamic cutting optic with f = 150 mm FocusLine FastLine Cell ObserveLine Rotary changer D = 4,000 mm including rear-side safety guard Scrap conveyor belt 4× configurable control interface Manifold block for 8 pneumatic clamps per side 2× loading status indicator for rotary changer Extended compressed air supply on equipment panel including vacuum ejectors Cutting gas: compressed air Renishaw touch probe Measuring head (without touch probe) Measurement data processing 3× horizontal jig interface Extraction ducting Protective enclosure for rotary changer, including safety guard, 1 window, and column for control desk Status signal tower top & bottom Video monitoring with camera Monitor holder Special installation KLH chiller

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 8,000 h, machine/vehicle number: S1631C0399, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: TRUMPF, controller model: TruLaser Cell 8030, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 3000, laser hours: 8,000 h, laser power: 3,000 W, laser wavelength: 1,030 nm, TRUMPF TruLaser Cell 8030 – 3D Laser – 2017 – 3 kW TruDisk is one of the most advanced and efficient 3D laser cutting machines in the world, widely used in the automotive industry, especially for processing hot-formed stamped components, body parts, rocker panels, and B-pillars. The machine is equipped with a TRUMPF TruDisk 3000 fiber laser (3 kW), offering high cutting quality, process stability, and low operating costs. The system features a 5-axis motion system and a spacious, ergonomic working chamber. Technical Data: Manufacturer: TRUMPF Laser- und Systemtechnik GmbH (Germany) Itsdpfxoxxl A Ee Affer Model: TruLaser Cell 8030 Type: L60 Year of manufacture: 2017 Serial number: S1631C0399 Laser: TRUMPF TruDisk Laser type: solid-state fiber laser Laser power: 3000 W (3 kW) Wavelength: 1030 nm Operation: CNC Controller manufacturer: TRUMPF / Beckhoff Controller model: Beckhoff CX-Series (CX2030 / CX2040, TruControl system) Power supply: 400 V / 50 Hz Connected load: 45 kVA Protection: 3 × 100 A Media: electric + pneumatic (no hydraulics) Motion axes: 5-axis 3D machining Maximum cutting thickness: Mild steel: up to 6 mm Stainless steel: up to 4 mm Aluminium: up to 3 mm

Condition: good (used), functionality: fully functional, Year of construction: 2013, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, CNC Laser Cutting System TruLaser Cell 3000 (L34) fiber X x Y x Z working area (max, mm): 800 x 600 x 400 Control: TRUMPF HMI based on Sinumerik 840 D solution line Laser power: 3,000 watts Operating hours: 31,875 h Laser on time: 3,286 h Machine High-dynamic and precise CNC laser machine Machine body made from mineral casting Axis system in cantilever design Axis travel range: 800 x 600 x 400 mm X-Y axes with linear direct drives Absolute measuring system with glass scales Z-axis with linear guide and ball screw drive Panel PC for process monitoring Integrated electrical cabinet and water/air machine chiller Protective enclosure active Active, sensor-monitored safety system, laser protection class 1 for laser power > 1000 - 8000 W - automatic lift door with personnel protection - double-walled side protection doors - safety window Technology package CutLine Professional Process adapter for cutting with gas supply FocusLine Focus diameter adjustment ControlLine Digital camera system for process monitoring Cutting optics adjustment device For aligning the cutting optics with the laser beam Technology package WeldLine - Welding functionality with FocusLine Professional - Welding gas supply for 3 gases Process adapter Welding f150 Crossjet Swivel axis focusing optics Torque axis for 3D processing with direct measuring system Swivel angle optics ± 135° Clamping frame with set of clamping bridges Modular system for fixture mounting Height adjustable 640-940 mm 1x clamping bridge each short/long 2D cutting table 800 x 600 mm For cutting sheet metal up to 6 mm Rotary axis C180 for machining rotationally symmetrical parts 3-jaw chuck d=125 Status lights Multi-touch unit MF-L1000 dust extractor External dust extraction system with a volume flow of 1,000 m³/h Filter system with automatic cleaning Power supply and control via the laser machine Function control MF-L1000 Reactive safety device for fire detection and suppression TruDisk 3001 TruDisk 3001 laser unit (4 C) Diode-pumped disk laser with beam quality of 4 mm mrad Laser power at workpiece: 3,000 W Consists of: - Laser with 1 cavity - Integrated laser power supply and real-time capable controller for evaluation and visualization of operating data - Fast laser power regulation - TruControl 1000 controller: - CPU with real-time operating system - 2x USB interface - 24x digital I/O interface, configurable as real-time interfaces - Expandable with fieldbus interfaces - Storage capability for 199 laser programs - Intelligent water management (CLK) with water-to-water heat exchanger and operating status display on control panel - Safety monitoring according to laser protection class 1, incl. central safety interlock - Housing for max. 4 laser outputs - Protection class: IP54 Control panel OP84 - Removable operating panel for laser unit control - 8.4" touchscreen with rotary push knob - Buttons: Emergency stop, power on/off Beam guidance consisting of: - Optical assembly for 1 laser light cable D - Central safety interlock Iedpjxur Iajfx Affotr - Switching time 50 ms - Output 1 with 100% with safety interlock - Pilot laser per laser light cable output incl. electrical control Chiller unit

Year of construction: 2012, condition: excellent (used), Used Trumpf Tru Laser Cell 7040 5 axis / 3d cnc laser for sale Type L13 Itedpoitvihofx Affer Year 2012 4,000 mm (157 in) Y travel 1,500 mm, 2,000 mm (59 in) Z travel 750 mm, 1,000 mm (30 in) Cutting speed 100,000 mm/min, 173,000 mm/min (65.617 in/s) Laser power: 3.2kw / 3200 watt TruFlow 3200

Condition: used, Year of construction: 2015, TYPE: L13 / S0540C0311 Year of manufacture: 2015 Laser on: 33,112 h Beam on: 8,166 h Power: 5,000 W X-axis travel: 4,000 mm Y-axis travel: 2,000 mm Z-axis travel: 750 mm B-axis travel: ±135° C-axis travel: n*360° Display: TFT 12" Interface: SINUMERIK 840D Iodpfx Aoxd Uaweffstr

Condition: excellent (used), Year of construction: 2008, table length 4000 mm table width 1500 mm burner heads 1 Control SIEMENS 840D Capacity 6000 Watt speed 10 m/min Itjdpfsu N I Erox Affor weight of the machine ca. 19 t dimensions of the machine ca. 9,5 x 7,3 x 3,1 m This Trumpf TrueLaser Cell (TLC) 7040 with 6 KW is a 5-axis laser machine. Description: - Max. Sheet thickness: ST:20mm / VA:20mm / AL:15mm - Closed machine room - Laser TruFlow 6000 - ADC cutting head - Positioning laser diode - Suspended control panel stationary, rotatable - Teach panel - Magnetic coupling, head detection - Laser power control - Power cycles - Laser welding

Condition: good (used), functionality: fully functional, Year of construction: 2005, Used 2-meter CNC press brake from Trumpf Iedex I N Awspfx Affjtr Model: V85 Capacity: 2050 x 85 tons Delem CNC control CNC-controlled Y1, Y2, X, and R axes Wila hydraulic upper clamping Year of manufacture: 2005 Without tools

Condition: ready for operation (used), functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,270 mm, workpiece weight (max.): 150 kg, Punching and nibbling machine with TRUMALIFT Sheetmaster! TECHNICAL DETAILS Press force: 220 kN Max. sheet thickness: 6.4 mm Travel path X-axis: 2,500 mm Travel path Y-axis: 1,270 mm Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Positioning speed simulation: 108 m/min Positioning speed rotary axis: 360°/sec Punching diameter: 76.2 mm Minimum programmable increment: 0.01 mm or 0.01° Workpiece weight: 150 kg Tool stations: 15 pcs Tool change time: 1.5 - 6.5 sec MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,400 x 5,800 x 2,100 mm Machine weight: approx. 11,050 kg EQUIPMENT Multitool control "Softpunch" function Pneumatic follow-up cylinders Small parts sensor for programmable part chute Parts box for finished parts Chip conveyor with container Scratch-reduced processing Air-cushioned mounting Additional clamping bridge Prepared for TRUMALIFT SheetMaster TRUMALIFT Sheetmaster for workpieces up to 2,500 x 1,250 mm Alignment system for loading stack with spreader magnets Manually movable scrap grid system Itjdjx I Hh Repfx Affjr

Year of construction: 2015, operating hours: 61,469 h, condition: ready for operation (used), Control Unit Brand TRUMPF Model TASC 6000 This TRUBEND Cell 5000 with TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. World's first bending automation with image recognition for maximum flexibility. Sheet metal parts up to 40 kg, 6-axis backgauge sensor technology. Maximum repeat accuracy thanks to angle sensor technology (ACB) in automated operation. It features a stable all-steel frame, electro-hydraulic top drive, and a modern block hydraulic system. The control unit is a TRUMPF TASC 6000 with a 15-inch touchscreen and network capabilities. Ideal for precise bending operations, consider the opportunity to buy this TRUMPF TruBend Cell 500 press brake. Contact us for more information about this machine. Itedpfxsx Imqle Affor Application Types Bending

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Included: Sheetmaster, Toolmaster TOP machine Ijdpfx Afex Ifcmjfetr Price on request

Condition: ready for operation (used), Trumpf 12-12-30-A32/09 disc laser S/N 1804667-00097 + power cable, used, minor signs of use, 100% functional, scope of delivery as per photos Iedpfexaib Isx Affjtr

Condition: good (used), Nibbling machine, nibbler, nibbler, tin snips, circular scissors Iedpfx Aob A N Nceffetr -Power: 900 watts -Max. cutting capacity: 3.25 mm -Dimensions: 500/220/H230 mm -Weight: 5.5 kg

Condition: good (used), Year of construction: 2004, Used Trumpf punching nibbling machine Model: Trumatic 5000 R Capacity: 3000 x 1500 mm Punching force: 22 tons Iodpfex I A H Asx Affetr Maximum sheet thickness: 6 mm Including SheetMaster for loading and unloading Including various tool holders

Condition: ready for operation (used), Year of construction: 2001, operating hours: 62,769 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, TECHNICAL DETAILS Itsdpfox I E Ezex Affer Sheet thickness: 8 mm Punching force: 220 kN Travel X-axis: 3,000 mm Travel Y-axis: 1,500 mm MACHINE DETAILS Control: Siemens Machine weight: approx. 17,500 kg Operating hours: 62,769 h EQUIPMENT Scraper position change monitoring Thread forming Marking – quick beading Slitting Multishear Multibend Backgauge repositioning Roller tools Setup cassettes Ball transfer table

Condition: ready for operation (used), Year of construction: 2007, operating hours: 40,709 h, controller manufacturer: TRUMPF, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, This 3-axis TRUMPF 3050 with liftmaster was manufactured in 2007, featuring a 6 kW laser, capable of cutting up to 20 mm, 15 mm in stainless steel, and 10 mm in aluminum. If you are looking to get high-quality cutting capabilities consider the TRUMPF 3050 machine we have for sale. Contact us for more information about this machine. • Mild Steel: 20 mm • Stainless Steel (SS): 15 mm • Aluminum (Alu): 10 mm Itedpsx Imh Rsfx Affer

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Included: Sheetmaster, Toolmaster, Gripmaster Price on request TOP machine Ijdpfox Ifa Ssx Affstr

Condition: ready for operation (used), Trumpf 1488573 control SW V 6.2 / HW Index C1 SN:00569, used, normal signs of use, 100% functional, scope of delivery as per photos Itedpfxjxaib Ue Affor

Condition: good (used), Weld edge former, weld edge former, weld preparation, weld edge forming machine, edge milling machine Isdsb A N Rgjpfx Affjtr -Bevel length: max. 10 mm -Strength: 40 kg/mm² -220 V 1800 W -470 strokes/min -Weight: 15 kg

Condition: used, Year of construction: 2000, Press force: 85 t Bending length: 2050 mm Distance between uprights: 1750 mm Control: DELEM Stroke: 215 mm Throat depth: 410 mm Weight: 7,900 kg Machine dimensions: 2700x2100x2400 mm Accessories: - Two-hand operation - 2 support arms - Side safety doors - Lasersafe Fissler - Wila tool holder - Die shifting - Crowning Itjdpfxexnxwne Affjr - Tool cabinet

Condition: ready for operation (used), Year of construction: 2015, Main Drive Itodpfxjx H U Dds Affjr Laser power 5KW Co2 Additional Equipment Platform installation possible Machine was connected to STOPA Universal large-scale storage system (4x2 metres) Working area 4000x2000mm Closed machine frame with integrated laser unit / Movement unit for high-precision processing / Torque drive in combination with linear direct drives / Closed beam guidance / Single cutting head strategy / Cooling unit Automatic pallet changer in longitudinal direction with extended pallet pull-out / 17” touch factory screen / ergonomic control panel with or screen / Work area lighting / Position laser diode spraying device / PierceLine, FocusLine, NitroLine, PlasmaLine Co2 laser TruFlow 5000 with optimized standby mode / Maintenance-free turbo radial blower / High-frequency excitation / TASC laser control, laser power control, laser logbook function Lens cutting head with 250mm lens / Universal quick-change device (UTI) with bus connection / LensLine with status check / ControlLine: Height control and sheet outer edge detection / Lens with RFID chip Laser ON / beam on 78187h/26610h This TRUMPF TruLaser 3040 was manufactured in 2015. It features a 5KW CO2 laser and has been maintained annually by TRUMPF. It can be integrated with a STOPA Universal large-scale storage system. If you are looking to get high quality cutting capabilities consider the TRUMPF TruLaser 3040 machine we have for sale. Contact us for more information. Application Types Cutting

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, ScheetMaster from a Trumpf Trumatic 6000-1600 line Year of manufacture: 2002 Runs very well Itjdsx Hx Itspfx Affer

Condition: used, functionality: fully functional, Year of construction: 2018, Pressure 100 t Itjdpfx Afjx Ifr Ijfsr Bending length 3000 mm Total power requirement 20 kW Machine weight approx. 7.7 t