Used Trumpf Laser Cutting Machine for sale (408)

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 23,295 h, control type: CNC control, The original invoice for the machine; it was purchased in 2022 for 225,000 euros and has hardly been used. CO2 Laser Cutting System Manufacturer: TRUMPF Model: TruLaser 3030 Lean Edition L 20 Year of manufacture: 2012 / overhauled in 2023 Operating hours: 23,295 / Working hours: 7,181 Power: 3,200 Watt Max. material thickness Rodpjx Sxwxefx Adajn Steel: 20 mm Stainless steel: 12 mm Aluminum: 8 mm Max. feed rate: 140 m/min Positioning accuracy: 0.1 mm Length: 6,500 mm Width: 7,600 mm Height: 2,200 mm Weight: 12,000 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 48,412 h, TRUMPF TruLaser 7040 Double-head machine Rjdpfx Aovnra Hedaen Year of manufacture: 2012 Power: 2 x 3200W Operating hours: 48412 hours Machine weight: 16,000 kg Available from Q2 2025! Further information on request.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 11,000 h, controller model: Sinumerik 840D, laser power: 2,700 W, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, working length: 6,500 mm, TruLaser Tube 5000 with Special Equipment: Laser TruFlow 2700 & SeamLine Tube! Rsdpfxeyanr Te Adajn TECHNICAL DETAILS Laser Power: 2,700 W Maximum Sheet Thickness (Steel): 6 mm Maximum Sheet Thickness (Aluminum): 4 mm Working Area: 6,500 mm MACHINE DETAILS Laser Type: TruFlow 2700 Control System: Sinumerik 840D Laser Operating Hours: 11,000 h EQUIPMENT - Documentation / Manual - Safety light curtain - Sturdy machine frame with integrated laser unit - CO2 laser TruFlow 2000, high-frequency excited, with cooling unit - Maintenance-free three-phase servo motors - NitroLine high-pressure cutting - SprintLine for rapid processing - Programmable cutting gas pressure control - Laser cutting head with 5 lenses - Quick-change device for the cutting head - Laser power control - Laser logbook function - Automatic shutdown - Workspace illumination - Multi-beam light curtains - Fully enclosed and ventilated beam guidance - Compact dust extractor - Protective enclosure - PRS 3001 discharge station with brush table - Set of clamping jaws D 20–85 mm and D 85–150 mm - 1 set of V-shaped form shells and guide rollers for round tubes - 1 set of U-shaped form shells and guide rollers for a circumscribed diameter of 120 mm - SeamLine Tube

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 22,600 h, machine/vehicle number: A0230A2187, laser power: 7,000 W, sheet thickness steel (max.): 25 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 116 mm, No minimum price – guaranteed sale to the highest bidder! TruLaser 5030 Laser Cutting Machine with Special Equipment TruFlow 7000! TECHNICAL DETAILS Laser power: 7,000 W Travel X-axis: 3,000 mm Travel Y-axis: 1,500 mm Travel Z-axis: 116 mm Max. sheet thickness (steel): 25 mm Max. sheet thickness (aluminum): 20 mm X-axis feed rate: 200 m/min Max. workpiece weight: 900 kg MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 11,100 x 4,600 x 2,600 mm Total weight: 12,000 kg Control system: SINUMERIK 840D Laser type: TruFlow 7000 Laser hours: 22,600 h Redpfoyanplex Adajn EQUIPMENT • Enclosed machine frame with integrated laser unit • Motion unit for ultra-precise machining • Gantry drive combined with linear direct drives • Enclosed beam guidance • Single cutting head strategy • TFT color monitor • Longitudinal conveyor belt for small parts and scrap • Automatic pallet changer • Work area lighting • Positioning laser diode • Oil spray device • Piercline • FocusLine • NitroLine • PlasmaLine • CO2 Laser TruFlow • Maintenance-free turbo radial blower • Lens cutting head with 250 mm lens • Universal quick-change device (UTI) with bus connection • LensLine with condition monitoring • ControlLine: height control and sheet edge detection • Auto shut-off • ConturLine • FastLine • FlyLine • Microweld • USB interface • RJ-45 network connection • CE marking • Light barriers • Multi-chamber extraction system • Compact dust extraction unit • Complete operating manuals • Lens cleaning kit • Transport locks • Crosshairs/ measuring bridge

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 18,000 h, machine/vehicle number: A0215A0232, laser power: 2,500 W, sheet thickness (max.): 15 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning accuracy: 0.1 mm, overall weight: 8,900 kg, TECHNICAL DETAILS X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Laser power: 2,500 W Maximum sheet thickness (mild steel): 15 mm Maximum sheet thickness (stainless steel): 6 mm Maximum sheet thickness (aluminum): 5 mm Axis speed: max. 60 m/min Positioning accuracy: ±0.1 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): approx. 7,400 × 3,300 × 2,300 mm Machine weight: 8,900 kg Mains connection: 400 V / 50 Hz Connected load: 65 kVA Control voltage: 24 V Required fuse protection: 3 × 100 A Compressed air connection: 7–14 bar Nitrogen connection (N₂): 29 bar Oxygen connection (O₂): 14 bar Operating hours: approx. 18,000 h EQUIPMENT Automatic pallet changer Rodpfeyb Rzysx Adaon FocusLine laser technology NitroLine laser technology Maintenance-free AC servo drives

Condition: used, Year of construction: 2010, table length 3000 mm table width 1500 mm burner heads 1 Control CNC weight 12700 kg dimensions of the machine ca. 9300 x 4700 x 2200 mm Technical data: Sheet thickness max: Mild steel: 20 mm Stainless steel: 15 mm Aluminum: 15 mm Copper: 4 mm Brass: 3 mm electrical connection: 40 kVA / 80 A electrical power consumption: 23 - 33 kW equipment: - Liftmaster Redpfx Asyfh Rgodaon - automatic nozzle changer - suction unit - operating instructions Laser head renewed in 2024 last maintenance 09/2025

Condition: used, Year of construction: 2006, table length 3000 mm table width 1500 mm laser capacity in Watt 4000 Equipment: - Closed machine frame with integrated laser unit - Laser unit: CO2 laser TFL 3200 high-frequency unit, maintenance-free turbo radial blower Rsdpfx Aoydfngedasn radial turbo blower, mirror telescope - Automatic pallet changer - Longitudinal conveyor belt for small parts / waste - Drives: Maintenance-free three-phase servomotors - Additional highly dynamic Xp-axis - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - APC capacitive height adjustment and process control - Automatic focus position adjustment AutoLas Plus - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLAS - ContourLAS for the production of smaller holes - PMS plasma sensor technology - Automatic sheet outer edge detection - Programmable power cycles - Compressed air cutting - PCS Process Control System - Microweld - Spraying device for safe thick sheet metal processing - Automatic switch-off - Work area lighting - Sinumerik 840D control system: Open control system on PC basis, simple operation, online help, integrated e-shop, diagnostic function, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: Multi-rigid light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction system and compact dust extractor, safety cabin

Condition: like new (used), functionality: fully functional, Year of construction: 2021, operating hours: 3,454 h, • Pressing force: 1000 kN • Bending length: 3060 mm • Usable installation height with manual or hydraulic tooling (Option: increased installation height): 350 mm (500 mm) • Usable installation height with TRUMPF Quick Clamp (Option: increased installation height): 430 mm (580 mm) Rsdpfx Adeyfxdwsajn • Max. distance between lower edge of press beam and upper edge of machine table (Option: increased installation height): 470 mm (620 mm) • Press beam tilting: ± 6.5 mm • Free distance between uprights: 3384 mm • Table width: 100 mm • Working height¹: 1049–1069 mm Speeds • Y-axis rapid traverse²: 200 mm/s • Max. Y-axis working stroke³: max. 15 mm/s • Y-axis return: 200 mm/s • X-axis: 500 mm/s • R-axis: 200 mm/s • Z-axis: 1000 mm/s Positioning accuracy • Y-axis: 0.01 mm • X-axis: 0.05 mm • R-axis: 0.1 mm Travel paths, backgauge zone • Y-axis stroke (Option: "Increased installation height"): 200 mm (350 mm) • X-axis travel: 600 mm • Max. backgauge zone in X-direction: 860 mm • R-axis travel: 150 mm Control • Standard scope: T3500T Multi-Touch control Connection data • Connected load (IEC) approx.: 20 kVA Dimensions and weights • Required floor space (length x width): 3607 x 1644 mm • Height (Option: increased installation height): 2370 mm (2700 mm) • Weight (Option: "Increased installation height"): 7700 kg (8300 kg) Paint / Color scheme • Structural body: White = NCS S 0505 R80B • Blue = approx. RAL Design 250 20 20 • Black = RAL 9005; Silver elements with RAL 9006 Equipment Extended machine equipment BendGuard: – Optoelectronic safety device enabling fast and safe bending – Maximum Y-axis rapid traverse speed is not limited in pure foot-operated mode – Tool height can be set easily and quickly with a rack solution and weight compensation – BendGuard can be easily slid back for lateral tooling processes without reinstallation – BendGuard is insensitive to shocks (disassembly), as the unit electronics are not connected Table supports (2 pieces): – Table supports are manually adjustable in Z- and R-directions and can be fixed with quick-clamp – Facilitate handling of large and heavy workpieces and can serve as storage surface for finished parts – Load capacity: 70 kg per support LED work area illumination front and rear: – Excellent illumination inside and in front of the machine’s working area – Modern LED technology: energy-efficient, cool-running, and very long-lasting DXF import: – Import DXF drawings into the 2D control system.

Condition: good (used), functionality: fully functional, Year of construction: 2006, laser power: 5,000 W, CNC Laser Cutting System TC L 3050 5000 Watt X Working area max.: 3000 mm Y Working area max.: 1500 mm Z Working area max.: 115 mm Control: Siemens Sinumerik 840D Laser power: 5000 Watt Operating hours: 72,846 h Laser on-time: 22,118 h Max. sheet thickness (mild steel): 25 mm Max. sheet thickness (stainless steel): 20 mm Max. sheet thickness (aluminum): 12 mm Standard equipment: - Hi-Las high-pressure cutting - Laser cutting head with 5'' lens - Laser cutting head with 7.5'' lens - Quick-change system for cutting head - Automatic sheet edge detection - PCS Process Control System - Positioning laser diode - Programmable assist gas selection/pressure adjustment - Microweld - PMS plasma sensor system - Sprintlas - Capacitive height control (DIAS III) - ContourLas - AutoLas Plus - Oil spraying device - Automatic pallet changer - Automatic nozzle cleaning - Work area lighting - Conveyor for small parts/scrap - Multi-chamber extraction Rodpfx Adjybaddeaen - Compact dust extractor - Automatic shut-off - Safety features (light barriers) - ToPs 100 lite - RJ-45 network connection - 3.5'' floppy disk drive - Comprehensive operating manual - Raised platform design without steel frame - 9-inch cutting head - High-speed cutting head 3.75-inch - LoadMaster left-hand side

Condition: used, functionality: fully functional, Year of construction: 2008, control type: CNC control, degree of automation: automatic, controller manufacturer: SIEMENS, controller model: 840 D, laser type: CO₂ laser, laser source manufacturer: Triumph, laser power: 6,000 W, laser wavelength: 4,000 nm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 750 mm, CNC 3D laser cutting and welding cell (5 axes) Model: TruCell 7040 L13 (Year of manufacture 2008) CO₂ Control: Redpfjydn Txjx Adaon TRUMPF (Siemens 840D) Axes (X / Y / Z): 4,000 / 1,500 / 750 mm Laser: TruFlow 6000 – 6 kW CO₂ (10.6 μm) Cutting heads: F240 & F150 (dynamic) Welding head: F240 mm Wire feed: 2-axis manipulator Rotary and height adjustment: 1,000 mm, 2 tonnes (synchronized) 1-axis rotary table: 200 mm chuck (synchronized) Extraction system: Herding, 4,000 m³/h Cooling system: Riedel (R134a) L31/37-TR4/01.05

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 21,572 h, machine/vehicle number: A3231E0369, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, controller model: Sinumerik 840D SL, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 12001, laser power: 12,000 W, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, sheet thickness stainless steel (max.): 50 mm, sheet thickness aluminum (max.): 40 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, positioning speed: 140 m/min, type of cooling: water, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, nozzle changer, safety light barrier, TRUMPF TruLaser 5030 fiber (L76), 12 kW (2022). High-spec 2D fiber laser cutting machine with 3000 x 1500 mm working area and Siemens Sinumerik control. Key technical data Manufacturer: TRUMPF Model/Type: TruLaser 5030 fiber (L76) Year: 2022 Working area: 3000 x 1500 mm Laser power: 12,000 W Control: Sinumerik 840D SL Max. sheet thickness: Steel 50 mm / Stainless 50 mm / Aluminium 40 mm Max. speed: 140 m/min Configuration / equipment (highlights) Box frame; longitudinal conveyor belt; gantry drive with linear direct drives Process cooler for machine and laser (water/air); work area illumination; pilot laser Spraying equipment; automatic nozzle cleaning; closed beam guidance via laser light cable (LLK); machine status light Cutting unit: protective glass with online monitoring; Dynamic Focus Control; automatic nozzle centering; adaptive lens system Functions/packages: AdjustLine, BrightLine Fiber, ControlLine, FastLine, FlyLine, FocusLine, NitroLine, PierceLine; fusion cut performance; high-speed package; copper & brass cutting packages Safety: CE marking; light barriers; enclosed protective housing; electrical rolling roof Dust extraction: compact / multi-chamber compact dust extractor (as configured) Connectivity: USB, RJ45 network; Central Link; Online Update Manager Pallet changer: automatic pallet changer in longitudinal direction Laser source: external solid-state laser TruDisk 12001 incl. Smart Beam Control Smart Nozzle Automation (nozzle changer + automatic nozzle inspection) Additional equipment: gas prefilters; wide transverse conveyor belt with tipping container (right side); cleaning brush; slag cart; dust extractor disposal units (2 x 30 L) Installation: mezzanine version (steel structure not included) Automation preparation: LiftMaster Compact preparation; LiftMaster Compact 1530 (AL34) available at additional cost Condition & availability Condition: used Available for collection: May 2026 (subject to decommissioning schedule). Viewing/cut test: by appointment (if still under power prior to removal). Commercial / logistics Ex-works (EXW). Buyer to arrange transport, machine will be decommissioned by authorised Trumpf engineers and loaded ono your transport. Export packing and documentation support can be provided if required. Enquiries Please contact for a full specification pack, serial details, hours (laser-on / control-on), service history, tooling/spares list, and video/cut sample requirements. Redpfx Aoyddbrjdaon

Condition: good (used), Year of construction: 2010, Trumpf TruLaser 3030, Year of manufacture 2010 / Commissioned 2011, Rjdpfxoydc Nzj Adaon Control unit: Sinumerik 840 D SL, Working area: 3000 x 1500 mm, Pallet changer, Trumpf CO2 Laser TruFlow 3200, Quick-change cutting head system, Height control, Sheet outer edge detection, Lens cutting head with 130 mm lens, Lens cutting head with 250 mm lens, HighSpeed cutting package for rapid cutting of sheet thickness up to 1.5 mm, Network connectivity via ExtensionCube, Machine has been regularly serviced, Hose replacement has been performed, Resonator quartz tube replaced, Laser power: 3200 W Operating hours: 72,871 Laser on: 26,337 hours

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, laser power: 4,000 W, sheet thickness (max.): 20 mm, input voltage: 400 V, type of input current: AC, Input voltage: 400V AC Frequency: 50Hz Connected load: 88kVA Control voltage: 24V DC Required fuse protection: 3x160A Laser power: 4,000W Compressed air connection: 7-10bar Rsdpfx Asycwwdedaon Nitrogen connection N2: 30bar Oxygen connection O2: 20bar Max. component size: 4,000x2,000x20mm Additional equipment: FEZER Maschinenfabrig GmbH – vacuum lifter V03004 (year: 03/99) STOPA Anlagenbau GmbH & CoKG – loading storage system – 084997 (load capacity: 3,000kg, year: 2008, sheet format: 2x4m, storage capacity: 30t, storage height: 5.36m, storage positions: 10) Overhead crane Loading and unloading stations

Condition: good (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: A0230A1932, control type: NC control, degree of automation: manual, actuation type: mechanical, controller manufacturer: Siemens, controller model: Siemens 840D, laser type: CO₂ laser, laser power: 5,000 W, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 12 mm, working length: 3,000 mm, working width: 1,500 mm, year of last overhaul: 2025, Equipment: centralized greasing system, chip conveyor, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Comprehensive accessories and spare parts – bellows and other wear parts renewed in 2025!! On-site inspection possible or even recommended!! Rsdpfx Aeycwuvodaen

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 31,411 h, TRUMPF Trumatic 3000 K03 Punch-Laser Combination Machine The punch-laser combination machine enables the flexibility of laser cutting to be integrated with the advantages of punching. The combination of these two technologies opens up a wide range of new possibilities, allowing the manufacturing of even the most complex sheet metal parts. Technical Specifications: - Punching force: 165 kN - Maximum sheet size: (X, Y) 2500 mm x 1250 mm - Max sheet thickness: 3 mm - Maximum tool diameter: 76.2 mm - Maximum forming height: 25 mm - Maximum bending length: 55 mm - Chipless thread forming: M2.5 – M8 - Laser power: 2000 W - Number of tool stations: 18 - Tool change time (per tool): 3.9 s - Tool change time (MultiTool): 2.2 s - Positioning accuracy: ±0.1 mm Rsdpfsycuypex Adajn - Repeatability: ±0.03 mm For optimal surface quality of sheet metal parts, the machine is equipped with a brush table and rollers surrounding the forming tools. The MultiTool stations can hold up to 180 different forming tools. Thanks to reduced production times and lower energy consumption, this punch-laser combination system offers a lower cost per unit compared to flatbed laser cutting machines, ensuring higher economic efficiency. This equipment is perfectly suited for efficient, high-volume production of complex sheet metal components. The integrated laser cutting head enables the creation of intricate shapes, delivers high-quality cut edges, and can be used when a specific profile punching tool is unavailable.

Condition: used, functionality: fully functional, 1. BALL RECIRCULATING UNIT KUVE20-B-1947 PART NO.: 386954 1 PC. Machine: T3030 L20 COUNTRY OF ORIGIN: FR 2. WATER MANIFOLD COMPLETE PART NO.: 1996899 1 SET Machine: T3030 L20 3. WELDING HEAD WS OPTICS 1 SET Machine: T3030 L20 4. CUTTING HEAD LENS 250 D40 – 17616 PART NO.: 1497234 1 PC. Machine: T3030 L20 COUNTRY OF ORIGIN: DE 5. (R)GRID VOLTAGE UNIT PART NO.: 0983675 1 PC. Machine: T3030 L20 6. BELLOWS Y-AXIS 93614-102-40 PART NO.: 0141394 1 PC. Machine: T3030 L20 7. EXPANSION VALVE TGEN 25TR MOP70 R134a PART NO.: 1627195 1 PC. Machine: 3030 6kW 8. BELLOWS X-AXIS 1854032 PART NO.: 606083 1 PC. Machine: T3030 L20 COUNTRY OF ORIGIN: IT 9. TRIODE UP TO 4KW RS3021CJ PART NO.: 903994 1 PC. Machine: T3030 BRAND: THALES Rsdpex Uzblofx Adasn 10. FILTERS 8 PCS. Machine: T3030 11. BELLOWS Y-AXIS PART NO.: 1226193 1 PC. Machine: T3030 5kW 12. DISK BELLOWS Y-AXIS PART NO.: 1353514 1 PC. Machine: T3030 5kW 13. BOX BELLOWS PART NO.: 0978079 1 PC. Machine: T3030 5kW

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 7,074 h, control type: CNC control, actuation type: electric, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser hours: 3,274 h, laser power: 2,500 W, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 3,000 mm, working height: 15 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 150 mm, workpiece weight (max.): 540 kg, power: 2.5 kW (3.40 HP), type of cooling: water, compressed air connection: 8 bar, year of last overhaul: 2017, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, We are offering this very well-maintained TRUMPF TruLaser 1030 laser cutting machine, year of manufacture 2012. Manufacturer: TRUMPF Rsdpfx Asycfrpjdasn Model: TruLaser 1030 Year: 2012 Condition: Very good Category ID: 1041 Type ID: 1180 Machine type: Laser cutting machine We are selling our well-maintained laser cutting system from TRUMPF because we are acquiring a new machine. All servicing and maintenance work has been carried out exclusively by TRUMPF. NO maintenance backlog. The machine is used in our facility for single-part production and small series (no multi-shift operation). Inspection is possible at any time; the machine is under power and can be demonstrated at your convenience. In 2017, the machine underwent a general overhaul by TRUMPF. If you have any questions or need further information, please feel free to send us a message or call us.

Condition: used, functionality: unexamined, Year of construction: 2011, operating hours: 35,623 h, machine/vehicle number: A1225A0041 / L20, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Siemens, controller model: SINUMERIK 840D SL, laser type: CO₂ laser, laser source manufacturer: Trumpf TruFlow 3200, laser hours: 35,623 h, laser power: 3,200 W, laser wavelength: 10,600 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 115 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 200 m/min, feed rate Z-axis: 80 m/min, cutting speed: 140 mm/min, positioning speed: 140 m/min, repeat accuracy: 0.05 mm, workpiece weight (max.): 900 kg, power: 3.2 kW (4.35 HP), input voltage: 400 V, input current: 100 A, input frequency: 50 Hz, type of input current: DC, type of cooling: water, overall weight: 12,000 kg, total length: 6,500 mm, total width: 7,600 mm, total height: 2,200 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, The machine was covered by a maintenance contract with Trumpf until 2023 and was serviced exclusively by Trumpf! Rjdpsxc E Rqjfx Adasn Technical Data: - Laser power: 3,200 watts (3.2 kW) CO2 laser source (TruFlow 3200) - Operating hours: NC control: 35,623 hours Resonator / Pump 1: 34,258 hours Beam On / Pump 2: 10,155 hours - Working area (X/Y/Z): 3000 mm x 1500 mm x 115 mm - Maximum sheet thickness: Mild steel: up to 20 mm Stainless steel: up to 12 mm Aluminium: up to 8 mm - Feed rates: X-axis: 3000 mm/min Y-axis: 1500 mm/min Z-axis: 115 mm/min - Positioning speed X/Y: 140 m/min - Smallest programmable increment: 0.001 mm CNC control: Siemens SINUMERIK 840D SL

Condition: used, functionality: fully functional, Year of construction: 2000, laser source manufacturer: Trumpf, laser source model: TLF 3000 turbo, laser power: 3,000 W, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, compressed air connection: 6 bar, Trumpf Maschinen Grüsch AG, laser cutting machine, TRUMATIC LC3030 Model: LC3030 Series: Trumatic Year of manufacture: 2000 General information: Input voltage: 400V AC Frequency: 50Hz Connected load: 73kVA Control voltage: 24V DC Required protection: 3x125A Laser power: 3,000W Compressed air connection: 6 bar Nitrogen connection (N2): 30 bar Oxygen connection (O2): 20 bar Max. component size: 3,000 x 1,500 x 20 mm Accessories: Liftmaster Rsdpjyazrtsfx Adaon Loading and unloading stations

Condition: good (used), Year of construction: 2003, Trumpf Trumatic L3020 Co2 Laser Fully working condition - removed from working factory Working Range X axis - 3000mm Y axis - 1500mm Z axis - 115mm Overshoot range X axis - -16- +88 Y axis - 19 - +61 Z axis - - 2 - +16 Max Travel range X axis - 3104mm Y axis 1580mm Z axis - 117m Control - Trumpf CNC Control based on siemens sinumerik 840D Electrical Connections with TLF 3200 - 73 kVa Fuses (at 400v) - 125A Speed - Max. positioning speed, Parallel to axis - 60m/min Rodpjt H Iv Rjfx Adajn Simultaneous - 85m/min Accuracy - smallest programmable increment. Positioning accuracy - +0.1mm Repeatability - +0.03mm Max laser power in cw mode with TLF3200 - 3200W Max material thickness - 20mm

Condition: used, functionality: fully functional, Year of construction: 2019, laser hours: 5,780 h, laser power: 4,000 W, TRULASER TUBE 7000 FIBER 4kW Year of manufacture: 07/2019 Laser power: 4kW fiber Laser on: 5780 h (!) Technical information: - Max. outside diameter: 254 mm - Loading and unloading - Loading with LoadMaster Tube: 6,5m / Automatic unolading: 4,5m - RapidCut  Use of a dynamic additional axis  More than fourfold accelerations possible Bevel cut technology package  Bevel cutting up to 45°  Contains electrically movable feed-through chuck - PierceLine  Optimized piercing process - Technology package for tapping • Additional machining processes such as flow drilling, tapping and twist drilling • NC controlled spindle with standard clamping system (standard interface HSK-A32) • The application and technology parameters of the tool adapter and tools should be requested from the respective supplier Rsdpfx Aeyalb Esdaon • 8-fold tool changer ...and many more options!

Condition: like new (used), functionality: fully functional, Year of construction: 2023, degree of automation: automatic, laser hours: 2,800 h, laser power: 6,000 W, positioning speed: 280 m/min, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, TruLaser 5030 fiber L76 6kW + LiftMaster Linear + Material Buffer small storage system BASIC MACHINE: TruLaser 5030 fiber (L76) Machine • Working area: 3000 × 1500 mm • Box-type frame • Longitudinal conveyor belt • Precision motion unit for high-accuracy processing • Gantry drive with linear direct drives • Process chiller for machine and laser (water/air) • Work area lighting • Pilot laser • Spraying system • Automatic nozzle cleaning • Integrated electrical enclosures • Integrated cabinet • Enclosed beam guidance via fiber optic cable (LLK) • Machine status indicator light • Transport and installation device Rjdpjyah Rcefx Adaon TRUMPF laser • Pump diode excitation • Laser power regulation Cutting unit • Universal cutting head with fully adaptive lens system • Protective glass • Online condition monitoring for protective glass • Dynamic Focus Control • Automatic nozzle centering Control • Rapid post-production • SINUMERIK CNC • Ergonomic control panel with 21.5" wide-format multi-touch color display • Integrated technological parameters • Automatic shutdown • Programmable pressure/cutting gas selection • Microweld • Remote maintenance interface • Production planning • Multi-sheet processing • Condition Guide • Cutting Guide Functions • AdjustLine • BrightLine fiber • Smart Nozzle Automation • DetectLine • Drop&Cut • Integrated camera 1 for process monitoring • ControlLine • FastLine • FlyLine • FocusLine • NitroLine • PierceLine • PlasmaLine • Fusion Cut Performance Package • Highspeed Cutting Package • Copper Cutting Package • Brass Cutting Package Data transmission • USB port • RJ45 network interface • Online Update Manager Safety • CE marking and EC Machinery Directive compliant • Light barriers • Multi-chamber compact dust extraction unit • Electric rolling roof • Enclosed protective housing with certified viewing panels on both right and left sides Advanced standard configuration • Compact dust extraction • Mild steel slats • Laser powered via the machine • Automatic longitudinal pallet changer • Machine ambient temperature range 5-35°C / up to 45°C • Smart View MT ready • Data usage agreement • Nanojoints • Smart Rerun / Purchase • External solid-state laser TruDisk 6001 with BrightLine fiber OPTIONS: Highspeed Eco cutting package • High-speed cutting with reduced gas consumption Thick plate cutting package Prefilter for nitrogen and oxygen • Particle filtration for nitrogen/oxygen process gas lines, prefilter with external filter element Easy Filter • For annual maintenance of spent cooling water • Eliminates regular water changes Wireless Operating Point

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, Special machine – Laser cutting directly from coil Toolless, efficient, and flexible – for maximum cost-effectiveness Laser Cutting Cell: X-axis: 4000 mm Y-axis: 2500 mm Z-axis: 116 mm ARKU Straightening Machine TruDisk 8001 (8000W laser) Operating hours: Drives ON: 2,763h 46min Laser Beam ON: 84h 41min Main Switch ON: 7,757h 43min Coil System: Coil outer diameter: 800 mm to 2,000 mm Coil inner diameter: 510 mm / 610 mm Robot Unloading: Rjdpfox Sxchjx Adaen Number of axes: 6 Max. payload: 220 kg Max. horizontal reach: 2,701 mm Repeatability accuracy: 0.08 mm Interchangeable gripper system Number of suction cups: 48 Min. part size: 300 mm x 200 mm Max. part size: 2,500 mm x 1,250 mm Max. part weight: 100 kg Options: TruDisk 8001 Cleaning station Coil width up to 1,650 mm Coil width up to 2,154 mm Decoiler load capacity up to 20 t Decoiler load capacity up to 25 t Second unloading robot Cutting shear Warehouse integration Equipment: Standard control panel Cross conveyor belt Compact dust extractor Cooling unit Fixed machine roof External loading/unloading device Camera for process monitoring 1+2 Tilting container Longitudinal conveyor belt Automatic fire extinguishing system Compact dust extractor Machine status indicator light RCI remote control Remote access Simultaneous cutting head positioning Spraying unit Dust protection cover plate Nozzle changer Robot unloading 2 Wireless operation point Additional nitrogen connection Automation Scrap conveyor belt Laser: TruLaser 3040 L95 TruDisk 8001 Brass cutting package NanoJoints BrightLine Fiber Highspeed cutting package Highspeed Eco cutting package Smart Collision Prevention Spraying unit Oversize processing Kerf monitoring Self-burning monitoring Focus position monitoring Inlet air pressure monitoring Inlet Argon pressure monitoring

Year of construction: 2006, condition: ready for operation (used), This TRUMPF TRUMATIC L3030 was manufactured in 2006. It features a 2700 kW CO2 laser and Siemens CNC control, handling board sizes up to 3000x1500 mm. Consider the opportunity to buy this TRUMPF TRUMATIC L3030 CO2 laser cutting machine. Contact us for more information. Application Types Redjx R E Rpopfx Adaon Cutting

Condition: used, Year of construction: 2016, Trumpf Trulaser 5040 Type L69 Flat Bed Fiber Laser Cutting Machine, Sheet Size 4000 x 2000mm, Trudisk 800i (FD25) Fiber Laser, L4221N0240, Riedel PC501 Chiller, Trumpf Loadmaster. S/No. N0014A0345, Trumpf Campfil MF8.6 Dust Collector, Riedel L o/5 TR3.26B Chiller, Trumpf 05.21.00 Operating System, Laser Capacity 8000W, Working Range 4000 x 2000mm (X & Y), Z Axis 115mm (2016) Rsdpfx Ajx T Dbljdaon Location: Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.