Press brake

Trumpf TruBend 3100 B26

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, actuation type: hydraulic, controller model: Delem Touch, bending force (max.): 100 t, working width: 3,060 mm, stroke length: 100 mm, overall weight: 7,700 kg, total length: 3,600 mm, total width: 1,650 mm, total height: 2,400 mm, input voltage: 400 V, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, Technical Data Manufacturer: Trumpf Type: TruBend 3100 – B26 Year of Manufacture: 2014 Capacity: 100 t Bending Length: 3060 mm Distance Between Uprights: 3384 mm Stroke Length: 200 mm Dimensions: approx. L 3.6 x W 1.65 x H 2.40 m Weight: 7.7 t Equipment Tjdpfxe Agck Ss Apded - Controlled axes: X, X1, R, Z1, Z2 - Self-adjusting combined crowning system - Machine control: Multi-Touch Delem - Amada tool clamping system, top and bottom - Work area lighting - Laser-safe safety light curtain - Control panel with foot pedal - Large tool set All information is without guarantee. A demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 2019, operating hours: 5,800 h, functionality: fully functional, Timesavers 42 Series WRBW (Belt Sander / Rotary Brushes / Belt Sander) Year of manufacture: 2019 Only 5,800 operating hours! Todpfx Aoz A Ucmopdsd Includes an ATEX exhaust system from Ulmatec. Inspection is also possible.

Condition: defective spare-parts repository (used), Year of construction: 1997, machine/vehicle number: 885258, Defective hydraulic CNC press brake Offer 25514 Technical data: - max. working length 3060 mm - distance between uprights 2690 mm - max. pressing force 1300 kN - max. distance table / ram 370 mm - upright overhang 410 mm - ram stroke 215 mm Tjdpfxex Ew Dqo Apdsd - stroke speeds - downward speed, no load max. 200 mm/sec - upward speed 135 mm/sec - downward pressing speed 1 to 11 mm/sec - total drive power 18 kW - pneumatic connection 6 bar - space requirement approx. W 3800 x H 2400 x D 2400 mm - weight approx. 11500 kg - includes: - with 6-axis CNC control DELEM - two-hand control panel with foot switch - crowning device - controlled back gauge with height adjustment 5 - 860 mm - hydraulic upper and lower tool clamping - die table movement pneumatically assisted - Machine does not reference because 2 axes on the right side of the back gauge are not functioning; control module may be defective.

Condition: used, pressure 160 t passage width / mm stroke / mm Working height 800 mm Tsdsiulkqopfx Apdsd total power requirement 15 kW weight of the machine ca. 11,8 t - Table size: 1000x1000mm - Distance table/ram, large stroke above, gain. above: 800mm extra information Removable table

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. Tedpfxefz U S Es Apdjd - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: new, pressure 8,5 kN stroke 40 mm throat 95 mm Tsdpfx Asfv Awaepdsd Working height from to 95 - 240 mm table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 27 Kg dimensions 160 x 230 mm

Year of construction: 1990, condition: used, machine/vehicle number: 9072492, nominal capacity: 100 kVA throat: 500 mm Tjdpfx Ajz H Dyjpded spark plug air gap: 330 - 500 mm electrical connection: 400 V kW space needed: 700 x 1420 x 2000 mm weight: 750 kg

Condition: new, Year of construction: 2022, 3 UNITS new, factory-sealed, unused, available for immediate pickup. Todpfx Aeylugbepded Each chamber accommodates three trolleys. Gas heating, M2016 controller, VK01 smoke generator, core product temperature sensor, pneumatic door opening, product showering, central washing and automatic dosing system, thermal processing 40–110°C (heating, coloring, cooking, baking, drying), automatic air circulation, programmable with twenty settings.

Condition: good (used), Year of construction: 2007, control 840 D x-axis 2500 mm y-axis 2500 mm z-axis 1700 mm Control system - Siemens Sinumerik 840 D Max. workpiece weight - 6000 kg Spindle diameter - 130 mm Quill stroke - 700 mm Tool holder - ISO 50 DIN 69871 - AD Max. torque at the spindle - 1847 Nm Tsdpowzyp Ujfx Apdod Total power requirement - 65 kW Machine weight approx. 45 t Space requirement approx. 10.9 x 9.3 x 5.7 m

Condition: new, Hemming tool for Lvd/Trumpf Tjdpfxei Hbcws Apdod