Used Travelling Column Milling Machine for sale (86,219)

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs RAM TRAVEL 4’0”(914mm) Crsdpfsh U Nvkjx Ab Tek RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 MILLING SPINDLE MOTOR 40HP (30Kw) MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: good (used), TECHNICAL DATA • CNC: Heidenhain TNC 430 • Table surface: 7,100 x 1,200 mm • Longitudinal travel (X axis): 7,000 mm • Cross travel (Y axis): 1,500 mm • Vertical travel (Z axis): 1,500 + 500 mm • Rapid traverse (axes): 20,000 mm/min • Maximum working feed: 10,000 mm/min • Automatic head with 1º / 1º indexing: Included • Spindle taper: SK-50 • Spindle speed range: 20 – 3,500 rpm • Number of speed ranges: 2 • Main motor power: 50 kW • Automatic tool changer: Included • Tool changer positions: 60 Cjdpfx Abjxqq Rrj Terk • Internal coolant supply: Included • Swarf/chip conveyor: Included • Electronic handwheel: Included • Additional tank with paper filter: Included • Operator platform: Included • Guarding with 4 sliding doors: Included • Permissible load on table: 30,000 kg • Machine weight: 45,000 kg

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 50166, travel distance X-axis: 9,000 mm, travel distance Y-axis: 2,295 mm, travel distance Z-axis: 2,500 mm, rapid traverse X-axis: 9 m/min, rapid traverse Y-axis: 1 m/min, rapid traverse Z-axis: 2 m/min, feed rate X-axis: 3 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 2 m/min, spindle speed (max.): 710 rpm, spindle speed (min.): 15 rpm, rotational speed (max.): 710 rpm, total width: 8,500 mm, total height: 7,150 mm, total length: 20,720 mm, table length: 9,000 mm, table width: 2,000 mm, torque: 6,500 Nm, clearance between the columns: 2,750 mm, year of last overhaul: 2003, table height: 1,000 mm, table load: 45,000 kg, spindle motor power: 50,000 W, workpiece weight (max.): 45,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, GENERAL MACHINE CHARACTERISTICS The machine features a rigid gantry design with a movable table. The gantry is equipped with a height-adjustable crossbeam, which can be fitted with one or two vertical spindle heads of type VFS 160. Additionally, the gantry can accommodate one or two lateral (horizontal) spindle heads VFS 160. The specified spindle head types can be equipped with additional spindle heads, with up to 4 available. The clamping surface of the machine consists of two connected clamping tables, which can also be used separately when disconnected (only one can be active at a time). Clamping Table - Dimensions of one table: 2,000 x 4,000 mm - Total length of connected tables: 9,000 mm - Clamping surface of connected tables: 8,500 mm - Clamping T-slots (width x spacing x quantity): 36mm x 180mm x 11 pcs - Working table height from base: 1,000 mm - Load per meter of table length: 5,000 kg - Table travel: 4,250 mm (connected tables: 9,000 mm) - Working feed rate: 15 – 3,000 mm/min - Rapid traverse: 9,000 mm/min Gantry with Height-Adjustable Crossbeam - Clearance between columns: 2,750 mm - Crossbeam vertical adjustment: 2,295 mm - Crossbeam travel: 750 mm/min Vertical Spindle Head VFS 160 - Toolholder taper: ISO 60 - Spindle power: 50 kW - Speed range: 15 – 710 rpm - Working feed: 10 – 2,000 mm/min - Rapid traverse: 2,000 mm/min - Distance from spindle nose to clamping table: 425 – 2,720 mm Horizontal Spindle Head VFS 160 - Toolholder taper: ISO 60 - Spindle power: 50 kW - Speed range: 15 – 710 rpm - Working feed: 5 – 1,000 mm/min - Rapid traverse: 1,000 mm/min - Distance from spindle nose to table centering T-slot: 377 – 1,177 mm Overall Machine Dimensions (L x W x H): 20,720 mm x 8,500 mm x 7,150 mm Additional Spindle Heads: NVS Head (Extension Adapter) - Toolholder taper: ISO 60 - Speed: 15 – 710 rpm - Max. transmitted power from 60 rpm = 40 kW - Max. torque: 6,500 Nm HFUS Head (Universal Milling Head) Csdpoxpudtofx Ab Tork - Toolholder taper: ISO 60 - Speed: 15 – 710 rpm - Max. transmitted power from 80 rpm = 22 kW - Max. torque: 2,700 Nm - Swivel range vertical axis: 360° - Swivel range horizontal axis: 360° - Quill adjustment: 50 mm HFOS Head (Double-Sided Right-Angle Milling Head) - Toolholder taper: ISO 60 - Speed: 15 – 710 rpm - Max. transmitted power from 60 rpm = 40 kW - Max. torque: 6,500 Nm

Condition: used, Year of construction: 2000, travel distance X-axis: 9,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,500 mm, table width: 1,200 mm, table load: 5,000 kg, table length: 9,500 mm, Bed Milling Machine 5-axis Table size 9500 x 1200 mm. Movement x-Axis 9000 mm. y-Axis 1500 mm. z-Axis 1500 mm. Codpfoxd Am Sex Ab Terk Max table load 5000 kg/mtr Swiveling of vertical milling head 1°x1º CNC Control Heidenhain TNC 430 CB If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, spindle speed (max.): 4,000 rpm, table width: 1,100 mm, table load: 10,000 kg, table length: 3,200 mm, workpiece weight (max.): 10,000 kg, WORKING RANGE Longitudinal X: 3000 mm Transversal Y: 1400 mm Vertical Z: 1500 mm TABLE Dimensions 3200 x 1100 mm Capacity 10 tons KOSMO 4000 ISO 50 BI-ROTATIVE INDEXING HEAD Rotation speed: 4000 rpm Power: 24 kW Tool taper: DIN 69871 Indexed head with oil lubrication Positions on the rear table: 144 (2.5° step) Positions on the front table: 120 (3° step) RAPID TRAVEL SPEED X-Y-Z: 20 m/min ACCESSORIES SUPPLIED: • SELCA 4045D CNC • 40-station tool changer • Electronic handwheel SELBOX remote control Codew H Snxopfx Ab Tjrk • 4 magnetic chucks, 1000 x 400 mm • 1 vice • Approximately 30 ISO 50 cones • Chip conveyor • Instruction manuals and CE declaration

Condition: new, Year of construction: 2025, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,900 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 10 m/min, spindle speed (max.): 10,000 rpm, total width: 7,170 mm, total height: 4,620 mm, total length: 4,390 mm, table length: 2,500 mm, table width: 1,600 mm, table load: 10,000 kg, tank capacity: 24 l, tool length: 200 mm, tool diameter: 300 mm, THE MACHINE IS FULLY PREPARED FOR SHIPMENT FROM THE SUPPLIER'S WAREHOUSE IN CHINA. DELIVERY TO EUROPE: 1–2 MONTHS. PRICE INCLUDES INSTALLATION AND FULL WARRANTY. The GMF 2519T gantry machining centre is ideal for heavy-duty roughing (removal of large material volumes) as well as finish machining (final, high-precision processing) of large workpieces. In addition to these operations, the machine can perform: milling, drilling, boring, countersinking, reaming, rigid tapping, and other operations. Credpfx Aboxbd Ifj Tok Key Advantages - High-precision and productive machining of simple and complex parts. - Stable machining process with excellent repeatability. - Remote diagnostics and data management. - Wide range of configurations and accessories. STANDARD EQUIPMENT OF HT5L MACHINE - Fanuc Oi-MF CNC control system - CNC package for high-speed mould machining - Spindle BBT50 – 10,000 rpm - Tool magazine with 24 positions - Air-conditioned electrical cabinet - Spindle oil cooling system - Standard work area guarding with open top - Swivelling operator panel for machine and CNC system - Chip conveyor with integrated tank - Automatic lubrication system - Three-colour signal tower - Air blow gun - Coolant gun - Standard service tool set - Oil separator - Renishaw TS27R probe - Operation manual – mechanical part - Operation manual – electrical part - CNC system operation guides - BT50 taper test arbor for machine geometry check - CE-compliant design

Condition: like new (used), Year of construction: 2017, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,200 mm, table length: 3,500 mm, table width: 1,750 mm, spindle speed (min.): 24,000 rpm, Heidenhain iTNC 530 control Main spindle HSK-A 63 Speeds: 1-24,000 rpm Tool changer for 50 tools Through-spindle cooling Crodpfxew S T Iqs Ab Tok 5-axis milling machine with simultaneous milling head (Gabelkopf)

Condition: ready for operation (used), travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, Correa A-20-25 Bed Type Travelling Universal Milling Machine Spindle Speeds 20 - 2000rpm Codpfsw Rg Rvsx Ab Terk Spindle Taper ISO50 Spindle Motor 15kW Table Size 2500 x 700mm Longitudinal X Axis Travel - 2200mm Vertical Y Axis Travel - 1000mm Cross Ram Z Axis Travel - 1000mm Range of Feeds Inf. Variable 5 - 1500mm/min Rapid Feeds 3000mm/min Overall dims - 3600 (5800) x 2220 (3320) x 2750 (WDH) Weight 9500kgs. *For sale with Jet Machinery Ltd* Stock No: 78976 Serial No: 9210511 Price: £17,500.00 + VAT

Condition: excellent (used), Year of construction: 1999, Moving column milling machine in excellent condition. Disassembled machine visible at our headquarters. Codpfxjlfcdqo Ab Tsrk

Condition: good (used), Year of construction: 1990, 1 used well preserved CNC controlled tool milling machine as travelling column version with CNC path control GRUNDIG Dialog 11 table size 1600 x 675 mm tool holder SK / ISO 40 traverse X-axis, longitudinal 1200 mm Y-axis, cross 600 mm Z-axis, vertical 500 mm table load 2000 kg speed range 20 - 6300 rpm feed range, stepless 2 - 10.000 mm/min rapid traverse in all axes 10 m/min quill stroke 80 mm Drive power 100 % ED 7.5 kW 40 % ED 12 kW Machine dimensions L x W x H 3600 x 3000 x 2300 mm Machine weight 6800 kg Control cabinet dimensions L x W x H 1700 x 900 x 1750 mm Switch cabinet weight 470 kg Accessories / Special features: - CNC tool milling machine suitable for tool, jig and fixture making, training as well as mold making. - CNC path control GRUNDIG Dialog 11 Csdpfshhuf Hex Ab Tork - Screen graphics, dialog guided input, 3 D linear interpolation, circular interpolation, helical interpolation, polar coordinate input, numerous drilling and milling cycles, cycle input graphically supported, milling cycles "contour pocket" for automatic free milling of irregular pockets also with islands, shift and rotation of the coordinate system - Electronic handwheel - Interface RS 232 - Swiveling vertical milling head +/- 90 - Hydraulic tool clamping, DIN 2080 with clamping groove, Ott system - Spindle sleeve adjustment 80 mm - Horizontal milling device - Full protection cabin - Ball screw spindles in all 3-axes - Coolant system - Bele

Year of construction: 1999, condition: good (used), used moving column bed milling machine > make Kekeisen > type 1200/8 > year99 > With Heidenhain TNC 426 > > Spindle mounting SK40 > With 30-fold tool changer > Speed 20-7300 rpm > Rapid traverse 0-30 m/min > travels > X 1200 mm > Y 500 mm > Z 800 mm > Milling head automatically swivels in vertical > and horizontal position Cjdpfx Abom Twc To Tjrk > Drive power 28 kw > Weight 12 to

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,500 mm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 35 m/min, spindle speed (max.): 7,000 rpm, workpiece weight (max.): 15,000 kg, Equipment: rotational speed infinitely variable, FPT Moving Column Milling Machine mod. RONIN CNC Control Heidenhain 530 X axis 8,000 mm Y axis 1,500 mm Z axis (vertical) 2,500 mm Rapid traverse 35,000 mm/min Feed rates 15,000 mm/min Automatic bi-rotational milling head (continuous) – TUPC Spindle taper ISO 50 Max spindle speed 7,000 rpm No. 1 ROTOTRASLATE TRT TABLE Hydrostatic Dimensions 2,000 x 2,000 mm Travelling V axis: 1,500 mm Max load capacity: 15 tons No. 1 ROTARY TABLE Dimensions 1,500 x 1,500 mm Max load capacity: 15 tons Tool changer with 80 positions Total installed power 88.8 kW Equipped with: - Internal high-pressure through spindle: 20 bar - External high-pressure coolant: 4 bar - Chip conveyor - Remote CNC Heidenhain wireless control pendant - Laser probe and software for tool integrity check, tool length & radius measurement - Workpiece measurement and alignment probe Codpfx Aowzxwqjb Tsrk USED MACHINE

Condition: like new (used), Year of construction: 2019, operating hours: 3,944 h, functionality: fully functional, Controller NCT304 (Touch screen, USB, 19 inch screen) Table size 2000 x 1400 mm Nod of T slots x sizes x distances 9 x 22 x 160 mm Table load max 6000 kgs Distance between spindle and table surfaces 200 - 1000 mm Distance between columns 1650 mm Position accuracy < 0.02 mm Repeatebility < 0.008 mm The X / Y guides are cylinder rollers 2 / 2 The Z guide is flat guide X travel 2100 mm Y travel 1500 mm Z travel 1000 mm X / Y / Z rapid speed 20 / 20 /15 m/min Feedrate 15 m/min Spindle speed 10000 rpm Tool holder type:SK50 Direct drive system No of speed ranges 2 Spindle power 22 kW ATC magazin 30-fold (arm type) Max tool length 400 mm Max tool dia 125 (215) mm Max tool weight 20 kg Floor requirements LxWxH = 6000 x 4600 x 4200 mm Weight 23500 kgs Accessories, features - CTS - Coolant tank - Chip conveyor - Angle head (manually adjustable) - Arm type tool changer - Lighting of working area - Washing gun - Manuals The machine is in very good and almost new condition. Still under power and ready to buy immediately. Credpfx Aotr E A Ujb Tek

Year of construction: 1982, condition: used, x-travel 970 mm y-travel 420 mm z-travel 430 mm Control Heidenhain TNC 135 number of speeds 12 speeds 31,5-1400 U/min feed range lengthways and crosswise 8-2000 mm/min feed range - vertical 4-1000 mm/min rapid traverse longitudinal and cross 4 m/min Crjdpfx Abek H R H Us Tok rapid traverse Z-axis 2 m/min table-size ca. 1300 x 350 mm weight of the machine ca. ca. 3,8 t dimensions ca. 3050x2350x2320 mm

Condition: excellent (used), travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,600 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 24 m/min, feed rate Z-axis: 24 m/min, spindle speed (max.): 3,200 rpm, rotational speed (max.): 3,200 rpm, pivoting range: 360 °, year of last overhaul: 2022, coolant supply: 16 bar, ejection height: 1,250 mm, tank capacity: 800 l, Technical Specifications Travel Paths • X-axis (bed): 8,000 mm • Y-axis (vertical): 2,600 mm • Z-axis (headstock horizontal): 1,600 mm Control System • CNC control: Heidenhain iTNC 530 Feed Rate • Y- and Z-axis continuously adjustable from: 2 – 24,000 mm/min • X-axis continuously adjustable from: 2 – 20,000 mm/min Universal milling head with orthogonal design • Milling head swivel range: 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed: 3,200 rpm Chip Conveyor • Ejection height above floor: 1,250 mm • Feed length: 8,000 mm mm • Feed width: 350 mm Coolant system • Paper belt filter system o Tank capacity: 800 l o Pump capacity on the machine: 16 bar o Approx. 32 l/min Year of manufacture: 2005 • 2016: General overhaul of the headstock unit • 2022: General overhaul of the milling head About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our focus is on tool-milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls, and control system upgrades. Services: - Used machines Crodpfxewfdalo Ab Tsk - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization _____ _____ _____ Used machine - used milling machine - used traveling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used milling machine - used CNC milling machine - used drilling and milling machine - used metal milling machine - used metal milling machine - used metal milling machine - used CNC milling machine - CNC milling machines - CNC milling machines - milling machine - large-part machining - large-part machining - large-part machining - CNC large-part machining - milling - SHW - UF6 - UF 6 - Uniforce - SHW UF - SHW Uniforce - SHW Uniforce 6 - UFZ 6 - UFZ6L - UFZ 6 L - Heidenhain - MBM milling machine - MBM machine - column milling machine

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, functionality: fully functional, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, position of the milling head: 2.5 x 2.5 °, mount diameter: 50 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, total width: 50,000 mm, total height: 48,750 mm, total length: 212,400 mm, table length: 12,000 mm, table width: 1,650 mm, power: 0.03 kW (0.04 HP), overall weight: 50,000 kg, X-axis: 10300mm Y-axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 1650mm Table load: 50000 Power on spindle: 22/30kW Spindle speeds: 60-3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21240mm Width: 5000mm Height: 4875mm Weight: 50000kg Crodpfx Absrx Rtrs Tsk

Condition: ready for operation (used), total height: 3,580 mm, total width: 3,452 mm, total length: 10,345 mm, controller manufacturer: Heidenhain, empty load weight: 23,500 kg, 4 assen gelijktijdig hoge druk koeling door spindel (20 bar) 4e as op tafel (zowel horizontaal als verticaal) Renishaw meetsysteem centraal smeersysteem Gereedschapswisselaar met 24 posities T-sleuftafels Stolle inbegrepen 7000 x 1500 mm Spaantransportband Longitudinal travel X-axe: 6000 mm Crosstravel Y -axe: 1200 mm Travel Z-axe (Height): 1500 mm Dimensions clamping space - table: 7000 x 1500 mm Power on spindle: 30 kW Admission in millingheadspindle (ISO): ISO 50 Csdpfxjwaiuko Ab Tsrk Max speedrange: 40 > 3000 rpm

Year of construction: 1997, condition: used, Technical Data Spindle taper ISO 50 DIN 69871 Longitudinal stroke 3000 mm Slide stroke 1000 mm Csdpfx Abog Amzko Terk Transversal stroke 1000 mm Vertical stroke 1500 mm Table size 3500x920 mm Spindle speed 4000 rpm Spindle power KW. 27,5 Non binding data to be verified / Data must be verified Standard equipment CNC SELCA 3045 AUTOM.BI-ROTARY HEAD (A-AXIS 1° - B-AXIS 1°) 30 POS. HORIZONTAL AND VERTICAL TOOL CHANGER SWARF EVACUATION

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 8,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 2,500 mm, spindle speed (max.): 3,000 rpm, rotational speed (max.): 3,000 rpm, type of input current: three-phase, coolant supply: 15 bar, spindle motor power: 33,000 W, controller manufacturer: HEIDENHAIN, controller model: 430 CA, power: 0.033 kW (0.04 HP), Equipment: rotational speed infinitely variable, ANAYAK HVM 9000 – CNC moving column milling machine | 8300 mm x travel | Fully overhauled High-capacity CNC bed milling machine with moving column, reconditioned in workshop. Perfect for heavy-duty machining of large components with precision and reliability. Crjdpfx Aboqpd D Ij Tok 🛠 Key technical specifications: • X-axis travel: 8300 mm • Y-axis travel: 2000 mm • Z-axis travel: 2500 mm • Spindle power: 33 kW – 3000 rpm • Spindle taper: ISO 50 DIN 69871-B • Tool changer: 30 positions • Automatic axes: B and C • CNC Control: HEIDENHAIN TNC 430 CA • Internal coolant: 50 l/min at 15 bar • External coolant: 100 l/min 🔧 Full retrofit includes: • Regrinding and geometry adjustment of Y and column guides • Complete head overhaul: new bearings, seals, gears • Full electrical cabinet update under CE compliance • New telescopic covers, drag chains, and motor wiring • Machine tested and delivered with full documentation ✅ Ideal for: • Large-scale component machining • Energy, wind, and railway industries • Mold making, aerospace structures, and shipbuilding 📌 Ready for immediate delivery. Power, scale, and accuracy in one robust CNC machine.

Condition: good (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 24,000 rpm, controller model: Siemens CNC 840 D, TECHNICAL DETAILS X travel: 3,400 mm Y travel: 2,700 mm Z travel: 1,500 mm Control: Siemens CNC 840 D C-axis rotation range: +400° A-axis swivel range: +100° Clearance between posts: 2,200 mm Spindle Spindle speed: max. 24,000 rpm Spindle power: 15 kW Crodpfx Absv Uqyxj Tok Tool holder: HSK A63 Tools & Pallets Tool changer positions: 20 Number of pallets: 2 Pallet size: 2,500 × 1,400 mm EQUIPMENT - Gantry design with 5 axes

Year of construction: 2018, condition: like new (used), Manufacturer: AXA Type: VCC50 Year of manufacture: 2018 read operating hours (h): 6,332, Serial no.: 87844, X travel: 1,350 mm Y travel: 750 mm Z-travel: 850 mm distance table - spindle nose: 180 - 1.030 mm B-axis additional C-axis (conversion to A-axis theoretically possible), rapid traverse (X/Y/Z): 25/25/20 m/min surface of clamping table: 2.050x850 mm max. table load: 800 kg/m² 5 tN tool changer 22-fold tool holder SK 50 max. tool length: 400 mm max. tool weight: 15 kg max. feed force: 9.000 N main spindle: 6.000 rpm spindle arrangement: vertical control SIEMENS 840 D SL Cedpsh Eg Ebefx Ab Tork full protection cabin with sliding door swivel spindle Chip conveyor NC rotary table RTA4S-630 2 clamping jaws Paper belt filter system oil mist extraction electr. handwheel machine weight: 17.500 kg machine dimensions: 2.600 x 2.400 x 3.100 mm

Condition: ready for operation (used), total height: 3,900 mm, total width: 2,900 mm, total length: 8,000 mm, controller manufacturer: Heidenhain, empty load weight: 13,000 kg, Type: TMML6-centrum Maximale afstand van kolom tot midden van spindel: 1210 mm (diepte van de kiel) Gereedschapswisselaar met 30 posities Spaantransportband Kan achteraf worden uitgerust met nieuwe Heidenhain-besturing Originele tafel kan opnieuw worden gebruikt of een T-gleuf vloerplaat om hogere werkstukken te kunnen bewerken Longitudinal travel X-axe: 3023 mm Codpfxev St Efe Ab Tjrk Crosstravel Y -axe: 800 mm Travel Z-axe (Height): 1528 mm Dimensions clamping space - table: 4200 x 1000 mm Max Height of workpiece: 2000 mm Power on spindle: 20 kW Admission in millingheadspindle (ISO): ISO 50 Max speedrange: 50 > 1980 rpm

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Crodexftqdepfx Ab Tek Prototrak SMX CNC Control,

Condition: used, Year of construction: 2019, functionality: fully functional, feed length X-axis: 787 mm, feed length Y-axis: 500 mm, feed length Z-axis: 500 mm, spindle speed (max.): 5,000 rpm, workpiece weight (max.): 600 kg, The machine is in good technical condition, connected to power and can be tested. Codpfx Aoxxtmfeb Terk

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm Crsdpfx Asxxb Rreb Tsk For sale with Jet Machinery Ltd Jet Machinery Stock No: #79003 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.