Used Traub Tnc 65 Dgy for sale (98)

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 12.7 [mm] - Max. machining length : 130 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 2.5 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 12.7 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 2.5 [kW] - C axis indexing precision : 0.001 [°] - Number of turrets : 2 UPPER TURRET - Number of positions : 6 - Number of motorized positions : 6 - X stroke : 35 [mm] - Y stroke : -9.5/+28 [mm] - Z stroke : 48 [mm] LOWER TURRET - Number of positions : 6 - Number of motorized positions : 6 - X/Z stroke : 35/79.5 [mm] END ATTACHMENT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 10000 [rpm] - X/Z stroke : 415/138.5 [mm] SECONDARY OPERATION Ksdpeuhaxfofx Affsfa - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 10000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] EQUIPMENT - CNC : Traub TX8i - Rotating guide bush - Coolant tank - Bar loader : LNS TRYTON HYBRID

Condition: excellent (used), CNC machine Traub TNL 26 Kodpfx Afjhlp Sdofefa Condition used, in good condition Sale to the exclusion of any warranty

Year of construction: 1986, condition: ready for operation (used), Turning diameter over bed/face slide: 360mm/160mm, center distance: 800mm, travel X/Z: 205mm/810mm, speed: 3150rpm, spindle bore: 60mm, tool positions: 8, rapid traverse X/Z: 10m/min. Machine dimensions X/Y/Z: approx. 3300mm/1800mm/1800mm, weight: approx. 3300kg, control: Traub System TX-8. An on-site inspection is possible. Kfsdpjwmqx Dofx Affsa

Condition: ready for operation (used), Year of construction: 2000, operating hours: 22,232 h, functionality: fully functional, machine/vehicle number: 317, turning length: 1,000 mm, turning diameter: 680 mm, spindle motor power: 60,000 W, spindle speed (max.): 2,800 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Turning length: 1,000 mm Turning diameter: 680 mm Spindle motor power: 60,000 W Max. spindle speed: 2,800 rpm MACHINE DETAILS Control model: TX 8H Electrical Data Operating voltage: 400 V 3~ Control voltage: 24 V ~ Solenoid voltage: 24 V – Clutch voltage: 24 V – Total power: 60 kW Total current: 100 A Spindle operating hours: 22,232 hours EQUIPMENT Documentation/Manual Continuously adjustable speed Chip conveyor RUEZ SFWW2 Oil separator Tool holder VDI40 Comprehensive documentation Note: Dismantling and loading can be supported with personnel and crane facility. Kfjdpew Rp Svsfx Affsa

Condition: good (used), Year of construction: 2005, operating hours: 60,764 h, functionality: fully functional, machine/vehicle number: 6030637, The machine is in good, ready-to-use condition and can currently be inspected under power. Disassembly and removal of the machine are the buyer’s responsibility. The machine features 2 turrets, each with 12 tool stations, all of which are driven. There is also a front station with 5 tool positions, 4 of them driven, as well as a rear station with 5 tool positions, 4 of them driven. The main spindle clamping system is a Hainbuch 32; the sub-spindle features an Axfix clamping system from Hainbuch. Various basic tool holders are included. Kjdpfxjw N Rzie Affofa

Condition: good (used), Machining diameter max: 36 mm Maximum spindle speed: 6300 rpm No. of Spindles: 2 Controller: Traub TX8i Toolchanger 1: No. of tools: 12 positions X-axis travel: 50 mm Z-axis travel: 50 mm Toolchanger fronside: No. of tools: 7 positions Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 370 mm Z-axis travel: 250 mm Kfjdstrvzxjpfx Affoa Toolchanger backside: No. of tools: 5 Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 73 mm Barfeeder: FMB Turbo 5-42 Barlength: 3200 mm Bardiameter: 5 - 42 mm Country of origin: Germany Machine LxWxH: 3400 x 1300 x 1700 mm Machine weight: 4000 kg

Condition: used, TECHNICAL DETAILS - Number of axes : 7 Kfodjuhawzspfx Affsa - Number of spindles : 2 - Number of turrets : 1 MAIN SPINDLE - Max. bar diameter : 12,7 [mm] - Max. machining length : 130 [mm] - Spindle speeds : 12.000 [rpm] - Spindle power : 2,5 [kW] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Max. bar diameter : 12,7 [mm] - Spindle speeds : 12.000 [rpm] - Spindle power : 2,5 [kW] LOWER TURRET - Number of positions : 6 - Number of motorized positions : 6 - X/Z stroke : 35/50 [mm] - Live tools speed : 8.000 [rpm] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 12.000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 18 [kW] EQUIPMENT - CNC : Traub TX8i - Interface : RJ45 / PCMCIA - Spindle brake : on main spindle - Parts catcher - Coolant tank : 200 [l] - Chips conveyor : KNOLL - Bar loader : FMB Minimag 3200 C - Number of turning tool holders : 2 - Number of fixed tool holders : 14 - Collets collection for chuck : F20 - Collets collection for chuck : F16 - Sockets : 4 - Set of shells and collets for bar feeder - Set of spare parts

Condition: used, dial indicator, dial gauge, measuring probe, measuring probe, precision dial gauge Ksdpfjurn R Sjx Affefa -Manufacturer: Traub, precision dial gauge -Measuring range: 0-5 mm -Reading accuracy: 0.01 mm .: Hoffmann 43250 5/40 -Number: 4x dial gauge available -Price: per piece -Case dimensions: 105/60/H25 mm -Weight: 0.1 kg/piece

Year of construction: 1983, condition: ready for operation (used), Turning diameter: 320mm, turning length: 1000mm, spindle clearance: 80mm, speed: 3150rpm, travel X/Z: 265mm/1000mm. Machine dimensions X/Y/Z: approx. 5500mm/2400mm/2400mm, weight: approx. 7000kg, control: Traub System TX-8. Including a tool set, three-jaw chuck and bar chuck with collets. Documentation available. On-site inspection is possible. Kfodpfjwzld Dox Affsa

Condition: excellent (used), Year of construction: 2000, operating hours: 49,274 h, functionality: fully functional, machine/vehicle number: 247, turning length: 80 mm, spindle speed (max.): 12,000 rpm, feed length X-axis: 35 mm, feed length Y-axis: 37 mm, feed length Z-axis: 75 mm, bar diameter (max.): 12 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Mitsubishi TX-8i Turning length: 80 mm Main spindle Technology: belt spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12.7 mm Travel path in Z1: 75 mm Workpiece clamping: collet chuck Counter spindle Technology: belt spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel path in X3/Z4: 222 mm / 139 mm Rapid traverse in X3/Z4: 30 m/min Workpiece clamping: collet chuck Tool carrier I (X/Y) Technology: turret with 6 stations (total drive) Tool holder: Ø 25 mm Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm Travel path in X1/Y1: 35 mm / 37.5 mm Rapid traverse in X1/Y1: 15 m/min Front attachment Number of stations: 4 Tool holder: Ø 28 mm Pitch spacing: 32 mm Tool drive: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel path in X3/Z3: 222 mm / 139 mm Rapid traverse in X3/Z3: 30 m/min Rear attachment Number of stations: 4 Tool holder: Ø 28 mm Pitch spacing: 32 mm MACHINE DETAILS Dimensions: 1,450 x 950 x 1,480 mm Weight: 1,600 kg Connected load: 16 kW Kedpfevrz E Hsx Affjfa Installation dimensions: 7,943 x 1,430 x 1,480 mm Control switch-on time: 96,171 h Switch-on time: 100,147 h Production time: 45,983 h Spindle 1: 49,274 h Spindle 2: 47,771 h Spindle 5: 15,297 h EQUIPMENT - Chip management: Chip conveyor - Coolant management: KSS pump - Raw material feed: Bar loader, FMB minimag 3200 - Finished part removal: Workpiece removal device (pipe) - Emulsion mist extraction: Interface mechanically prepared - Tool holder: Various rigid and driven holders

Condition: used, Year of construction: 1989, control / centre distance // mm greates pass round over bed / mm Control: TRAUB System TX-8 Spindle clearance (max. bars ®) mm 42 Chuck © mm 200 Turning diameter mm 180 Turning length mm 450 max. circulation ® mm 450 Rotation ® via sorting device mm 350 Rotation ® crosswise tailstock mm 180 Rotation ® over steady rest body mm 240 Longitudinal slide travel mm 490 Slide path flat mm 160 Spindle head DEN 55.026 = 26 - Spindle ® in front bearing mm 85 Ksdpoud Inmefx Affefa Power: 41 kW

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 5318, spindle bore: 26 mm, spindle speed (max.): 4,750 rpm, TECHNICAL DETAILS Max round diameter: 26 mm Max square size: 18 mm Max hexagon size: 22 mm Spindle power: 2.2 kW Number of spindles: 4 Spindle bore: 26 mm Speeds: 1,180 – 4,750 rpm Tool holder: 6 slots MACHINE DETAILS Length L -- R: 1,800 mm Width F -- B: 1,000 mm Height: 1,400 mm Weight: 800 kg Kodpfowtq Urjx Affsfa Total power: 3.2 kW Operating voltage: 380 V 50 Hz

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 - Number of turrets : 1 MAIN SPINDLE - Max. bar diameter : 12,7 [mm] - Max. machining length : 130 [mm] - Spindle speeds : 12.000 [rpm] - Spindle power : 2,5 [kW] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Max. bar diameter : 12,7 [mm] - Spindle speeds : 12.000 [rpm] - Spindle power : 2,5 [kW] LOWER TURRET Kedpjuhawujfx Affefa - Number of positions : 6 - Number of motorized positions : 6 - X/Z stroke : 35/50 [mm] - Live tools speed : 8.000 [rpm] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 4 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 18 [kW] EQUIPMENT - CNC : Traub TX8i - Interface : RJ45 / PCMCIA - Spindle brake : on main spindle - Parts catcher - Coolant tank : 200 [l] - Chips conveyor : KNOLL - Bar loader : FMB Minimag 3200 C - Number of turning tool holders : 2 - Number of fixed tool holders : 14 - Collets collection for chuck : F20 - Collets collection for chuck : F16 - Sockets : 4 - Set of shells and collets for bar feeder - Tool presetter

Condition: used, Grinding wheel puller, cup wheel puller, double bench grinder puller, flat grinder puller, cylindrical grinder puller, puller head, dressing head for grinding machines -Number: 1x disc puller available -Price: per piece -Dimensions: 325/130/H135 mm Kedsd R Ikdspfx Affsfa -Weight: 7.3 kg

Condition: good (used), Year of construction: 2005, operating hours: 32,870 h, functionality: fully functional, machine/vehicle number: 6030578, turning diameter: 32 mm, spindle speed (max.): 8,000 rpm, bar diameter (max.): 32 mm, We offer for sale Traub TNL26K automatic cnc lathe. Machine is connected to power and can be inpected every time by prior appointment. Year of built: 2005 Spindle passage 32mm Main spindle: 6.7/10.7kW; 8000rpm Counter spindle: 6.7/10.7kW; 8000rpm Upper turret: 12pos. 12x12/16x16, driven tools 2/5.5kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12pos. 12x12/16x16, driven tools 2/5.5kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24kW Barfeeder: FMB Turbo 5-42/4200mm Swarf conweyor: Knoll 240 S1/100 Coolant Kompaktbandfilter: Resy Kfedpsvldx Asfx Affsa Machine is sold with a lot of toolholders not driven and driven - list on attached photo.

Condition: used, functionality: fully functional, Traub automatic lathe Kfodpfjwcqv Iex Affoa

Condition: not inspected (used), Year of construction: 1994, operating hours: 8,000 h, functionality: unexamined, Machine in good condition Kfedpfsv Im Sdjx Affsa

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 25//16455, rotational speed (max.): 2,800 rpm, rotational speed (min.): 1,400 rpm, turning length: 65 mm, TECHNICAL DETAILS Turning length: 65 mm Thread length: 40 mm Kfjdpswtq Ulofx Affea Max. part length: 65 mm Motor speeds: 1,400-2,800 rpm MACHINE DETAILS Total power requirement: 2.6 kW Machine weight: 0.7 t Required space: 1,200 x 700 x 1,600 mm Main voltage: 415 V

Condition: good (used), Year of construction: 1989, 1 x automatic lathe Traub TD 16 year of manufacture: 1989 with hydraulic single-bar feed LNS Hydrobar 3.16 -HS 4.4 Year of construction: 1989 Equipment: 6-fold star turret Material quick clamping. Long turning device Central lubrication Vogel Kedpfx Afjvga A Tefsfa Accessories: see photos The machine can be inspected under power.

Condition: ready for operation (used), functionality: fully functional, spindle bore: 42 mm, turning length: 206 mm, TECHNICAL DETAILS Spindle power: 5.5 - 9 kW Max. workpiece length: 206 mm Kfodpfxewtq Ufj Affoa Spindle bore: 42 mm Tool holder: 4 slots MACHINE DETAILS Length (L - R): 2,500 mm Width (F - B): 900 mm Height: 1,700 mm

Condition: excellent (used), Year of construction: 1991, Multi-spindle & bar turning machines TRAUB TD 26 1991 * Spindle power 2.2 kW * Number of spindles 4 * Spindle bore 26 mm * Speeds 1.18 > 4750 mm * Total power 3.2 kW * Length L - R 1800 mm * Width V - H 1000 mm * Height 1400 mm * Weight 800 kg * Tool changer 6 tools Additional information * Max. round: 26 mm, max. square: 18 mm, max. hexagon: 22 mm Kfsdpfxswc Aqwj Affsa * * Bar loader available

Condition: excellent (used), Multi-spindle & bar-turning lathes TRAUB TK 42 Kfedpjwc Aqdjfx Affja * Spindle power 5.5 - 9 kW * Maximum workpiece length 206 mm * Spindle bore 42 mm * Length L - R 2500 mm * Width V - H 900 mm * Height 1700 mm * Tool changer holder 4 slides

Condition: good (used), Year of construction: 2013, BAR CUTTING MACHINE Kodpfjwc Amxex Affjfa TRAUB A 25 2013 Turning length: 65 mm Total power requirement: 2 kW Machine weight: approx. 0.7 t Space requirement: approx. 1200 x 700 x 1600 mm Thread length: 40 mm Max. part length: 65 mm Motor speeds: 1400-2800 Bar loader available!