Used Traub Tnm 42 for sale (90)

Condition: used, Year of construction: 1994, functionality: limited functionality, spindle bore: 42 mm, spindle speed (max.): 4,000 rpm, spindle motor power: 7,500 W, The machine is in continuous operation, producing hydraulic fittings from hexagonal 22 (automatic steel). It is a very rigid and efficient machine for simple components. The machine is equipped with a FETTE tangential thread cutting attachment. Two such machines are available; one is additionally fitted with a side drilling unit and a thread milling attachment with a large set of milling cutters. Both machines come with a large set of tool holders and collets. Price for both machines is negotiable. Lsdpfjxq Rz Djx Amvsac

Condition: good (used), Year of construction: 2007, Traub TNX 65/42 Milling and Turning Center Mfd. 2007 Serial #7060107 Commissioned in 2010 TX 8i-S control (Mitsubishi/Traub based control with Mitsubishi drives and motors) 15 CNC axis’s (4) X-Y-Z turrets with 10 positions each. Up to 20 tools per turret 65 mm thru hole main and sub spindle (sub spindle has coolant flush) Foot pedal control for clamp/unclamp of spindle chucks Servo driven gantry receiver Hydraulic swivel w/ pneumatic finished part and bar remnant gripper Finished part conveyor belt RESY paper band coolant filter Knoll Coolant tank with BKW refrigerated coolant temperature control 20 Bar High pressure and 8 Bar Low pressure coolant pumps Knoll chip conveyor FMB Turbo 5-55 magazine bar feeder (new in 2010) 2) Single stick turning tool holders 2) Double stick turning tool holders 1) Cut-off tool holder 1) Overdriven double radial live ER Collet tool holder 1) Overdriven radial live ER Collet tool holder 4) Radial live ER Collet tool holders 1) Radial live End Mill tool holder 1) Angle adjustable live ER Collet tool holder 2) Radial live Shell Mill tool holders 2) Axial live End Mill tool holders Laedjq Npqmopfx Amvoc 6) Axial live ER Collet tool holders 43) Additional tool holders on separate list (see supplemental attachment) Hainbuch main spindle collet chuck Rohm sub spindle 2 jaw chuck 2 Spare sets of spare Z-axis ball screws and bearing packs.

Condition: used, Year of construction: 2008, machine/vehicle number: 7041245, CNC control Traub system TX8 I, bar capacity 42 mm, max. turning length 450 mm, max. spindle speed 8000 rpm, 2 turrets each with 10 tool stations, driven tools, coolant system, chip conveyor KNOLL 240 S-1/50, filtration system/compact band filter RESY Ledpfoy Sqg Ejx Amveac

Condition: used, Year of construction: 2004, machine/vehicle number: 1057, CNC control TRAUB System TX 8 H, bar capacity 42 mm, max. turning length 450 mm, max. spindle speed 8,000 rpm, 2 turrets each with 10 tool stations, driven tools, KNOLL RP band filter system, chip conveyor. Ljdoy Sqhijpfx Amvjac

Condition: used, Year of construction: 2007, machine/vehicle number: 7041219, CNC control Traub System TX8 I, bar capacity 42 mm, max. turning length 450 mm, max. spindle speed 8000 rpm, 2 turrets each with 10 tool stations, driven tools, chip conveyor KNOLL 240 S-1/50, filtration system/compact band filter RESY KBF 452/500 Lodpfx Aoy Sqg Sjmvjac

Condition: used, Year of construction: 2007, machine/vehicle number: 7041201, CNC control Traub system TX8 I, bar capacity 42 mm, max. turning length 450 mm, max. spindle speed 8,000 rpm, 2 turrets with 10 tool stations each, driven tools, chip conveyor KNOLL 240 S-1/50, filtration system/compact band filter RESY KBF 452 Laedpey Sqhcjfx Amvjc

Condition: good (used), Year of construction: 2009, functionality: fully functional, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turrets: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. diameter of main spindle chuck: 175 mm - Minimum C-axis resolution: 0.001 degrees SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001 degrees - Travel: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg Ledpfoyw H Szex Amvjac New spindle since 04/26 ACCESSORIES - 3-color status signal lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts extraction - Parts belt conveyor

Condition: good (used), Year of construction: 2001, Ref. -No.: 10551 Manufacturer: TRAUB Type: TNC 42/65 Year of construction: 2001 Type of control: CNC Control: TRAUB TX Storage location: Halberstadt Country of origin: Germany Machine-No.: 93XXXXX Turning Speeds: 8000 RPM X stroke: 450 mm Turning Length: 450 mm Spindle Speeds: 4000 RPM Clamping Diameter: 42 / 65 mm Spindle Diameter In Front Bearing: 110 mm Tool Taper: 14 Max. Torque: 170 / 230 Nm Rapid Travel Speed X-Axis: 15 m / min Rapid Travel Speed Y-Axis: 6 m / min Rapid Travel Speed Z-Axis: 30 m / min Dimensions Of The Machine (Lxwxh): 4354 x 2076 x 1917 m Chisel slide cross section turning and milling support: 16 x16 ( 20 x20 ) mm Pressure: 70 bar hydraulic tank: 70 L. Total Power Requirement: 39 kVA Weight Of The Machine Ca.: 5,2 t Feed force X-axis at 100% duty cycle: 5000 N Feed path X-axis: 140 mm Z-axis feed path: 450 mm Y-axis feed path: 35 mm Ball screw Z-axis (Ø x pitch): 32 x 10 mm Ball screw X-axis (Ø x pitch): 32 x 5 mm Ball screw Y-axis (Ø x pitch): 25 x 5 mm Further information: - Revolver 1 Number of branches 10 Ledsy Ed E Uepfx Amvjac - Revolver 2 Number of branches 14 - Hecowpkfie Htlx Tfefh - Powered tools Yes The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2012, functionality: fully functional, Description follows Ledpfx Aex A Hdfomvoac

Condition: used, Year of construction: 1996, max. bar material dia. 65 mm Lodpfoxbtq Nex Amvjac max. swing diameter 175 mm max. bar length 3.000 mm control System TX 8F travel -x axis 140 mm travel -z axis 520 mm CNC lathe | TRAUB - TNC 42/65 DG equipped with bar loader. The machine is in a well-maintained condition. The machine videos from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNC65 | TNC-65 |TNC 42-65 DG | TNC 42/65DG

Condition: ready for operation (used), Year of construction: 1996, operating hours: 46,282 h, functionality: fully functional, controller model: TX 8F, counter spindle speed (max.): 4,000 rpm, workpiece diameter (max.): 56 mm, Equipment: bar feeder, chip conveyor, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified period, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Max. counter-spindle speed: 4,000 rpm Max. workpiece diameter: 56 mm Rapid traverse: max. 15 m/min Fine interpolation cycle: 0.34 ms Maximum thread pitch: 999,999 mm Maximum radius: 99,999.999 mm Feed override: 0–200% Rapid traverse override: 0–100% Spindle speed override: 50–120% Workpiece removal via counter spindle Programming: EIA and ISO code Input/output resolution: X/Z: 0.001 mm, C-axis: 0.001° C-AXIS Main spindle: Max. speed: 80 rpm Torque at 100% duty cycle: 100 Nm Accuracy: +/- 3 arcmin Counter spindle: Max. speed: 80 rpm Lsdpfsym A E Ijx Amvjac Torque at 100% duty cycle: 30 Nm Accuracy: +/- 3 arcmin Tool Turret 1 & 2 Driven tools per turret: 10 (14) Max. speed: 4,000 (8,000) rpm Power at 100% duty cycle: 1.5 kW Power at 15% duty cycle: 4 kW Torque at 15% duty cycle: 12.4 (4) Nm Number of tool holders per turret: 10 (14) Cylindrical shank as per DIN 69880: Ø 30 x 55 (25 x 48) mm Tool cross-section: 20 x 20 (16 x 16) mm Chip-to-chip time according to VDI 2852: 1.2 s Index time per station: 0.6 s Over 5 stations: 1.5 s Counter spindle (numerically controlled in Z-direction) Max. speed: 4,000 rpm Max. clamping diameter: 65 mm Continuously programmable AC motor: 11 kW Torque: 210 Nm Feed force at 100% duty cycle: 6,000 N Feed travel: 520 mm Ball screw: Ø 32 x 10 mm MACHINE DETAILS Control: TX 8F Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Rated current: 85 A Connection: 54 kW Connected load: 39 kW Noise emission at operator station: 71 dB(A) Hydraulics System pressure: 60 bar Tank capacity: 150 l Coolant Per tool turret: single-stage centrifugal pump Pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Read operating hours: 46,282 h EQUIPMENT STAMAG bar feeder Chip conveyor Hainbuch chucking system Two 10-station turrets with driven tool stations Counter spindle External reference: L. Schaible

Year of construction: 1996, condition: ready for operation (used), Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 78825h. Documentation available. On-site inspection is possible. Ledpfev Scrhox Amvjac

Year of construction: 1989, condition: ready for operation (used), Spindle bore: 42mm, max. workpiece diameter: 115mm, speed: 3150rpm, power: 9kW, bar length: 5200mm. Machine dimensions X/Y: approx. 2100mm/1000mm, weight: approx. 1500kg. Including bar feeder Stamag D 5000 and various accessories such as collets and feed collets. Documentation available. An on site inspection is possible. Laedpfx Ajxwn Ihjmvjc

Year of construction: 2015, condition: ready for operation (used), A CNC double-spindle lathe Traub overhauled in 2025 is available. Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 12938h. Including chip conveyor and bar loader LNS Quick Load. Documentation available. On-site inspection is possible. Lajdpev Scrbsfx Amvoc

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Traub CNC turning machine TNC65DGY, TX8I, year of manufacture 2005, serial number 113* Y-axis on S1, V-axis, 2x C-axis, 2 rotating tool drives, 2 turrets VDI30, Hainbuch BZI65 on main and counter spindle, parts gripper, without loading magazine. Very well maintained, in good condition, maintenance performed. Machine geometry has been checked and corrected/adjusted. Machines can be inspected while powered up – or a video is available. Approximately 4 weeks after order. Laodozfkbajpfx Amvoc Warranty of 6 months on main components as follows: Spindle bearing, ball screws, linear guides, clamping cylinders. The warranty expressly applies only to the replacement parts, not to downtime or labor time, or travel time. The warranty expressly does not apply to other parts than those mentioned above, e.g. wear parts, electrical components, electronics, hydraulics, etc.

Condition: good (used), Year of construction: 1999, operating hours: 110,000 h, functionality: fully functional, spindle bore: 42 mm, Description follows Lodox A Ha Hepfx Amvoac

Condition: good (used), Year of construction: 2007, CNC Long Turning Lathe Manufacturer: Traub Machine Model: TNL 12 Control System: Traub Year of Manufacture: 2007 TECHNICAL DATA Headstock - Max. bar diameter (mm) 12.7 - Quality of round material (DIN 671) (mm) Ø Xh9 - Max. speed (rpm) 12,000 Max. turning length / headstock travel - with fixed guide bushing (mm) 130 - with rotating guide bushing (mm) 80 - with programmable guide bushing (mm) 80 C-axis resolution (degrees) 0.001 Rapid traverse Z1 (m/min) 30 Tool turret 1 - Slide travel X1 (mm) 35 - Slide travel Y1 (mm) 38 (-10 +28) - Rapid traverse X1 / Y1 (m/min) 15 - Chip-to-chip time (s) 0.3 Tool turret 2 - Slide travel X2 (mm) 35 - Slide travel Z2 (mm) 50 - Rapid traverse X2/Z2 (m/min) 15 - Chip-to-chip time (s) 0.3 Tool drive for tool turret 1 and 2 - Max. speed (rpm) 8,000 - Tools max. (number) 2xG - Clamping diameter for drilling tools (mm) 0.5-7 Counter spindle / front tool holder - Max. bar diameter (mm) 12.7 - Max. longitudinal travel 23, 24 / Xg (mm) 140 / 228 - Rapid traverse 23, 24 / X3 (m/min) 30 - Tool holders (number) 4 - Max. speed (rpm) 12,000 - C-axis resolution (GSP) (degrees) 0.001 Rear tool holder, driven / fixed - Z-axis travel with work spindle (mm) 80 - Tool holder diameter (mm) 20 - Tool holders (number) 3 Rear tool holder (X4 axis) - X4-axis travel (mm) 39 - Rapid traverse speed (m/min) 15 - Tool holder diameter (mm) 28 - Tool holders (number) 4 Tool drive for rear tool holder (with X4 axis) - Max. speed (rpm) 10,000 - Driven tools max. (number) 4 - Clamping diameter for drilling tools - Driven (mm) 0.5 - 7 - Non-driven (mm) 0.5 - 10 Coolant system - Pump pressure, single-stage (bar) 3 - Tank capacity (l) 180 - Delivery rate (l/min) 40 EQUIPMENT FEATURES - Chip conveyor - Bar loader FMB Minimag 18 - High-pressure system Ljdszgczbspfx Amvjac - Fire extinguishing system Subject to change and errors in technical data and specifications.

Condition: used, Year of construction: 2001, turning diameter 340 mm turning length 750 mm control SYSTEM TX 8H spindle passage 80 mm swing over plan sled 530 mm greates pass round over bed 665 mm turning speed range - main spindle 3.150 min/-1 drive capacity - main spindle 22 kW number of tool places 12 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Two machines are available. Price per unit. Machine 1: - Images 1-5 - Operating hours approx. 55,790 h Machine 2: - Images 6-10 - Operating hours approx. 54,347 h Ledpexwdw Eefx Amvoac Technical Features & Accessories: - Y-axis - Accessory package with rigid and driven tool holders - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: ready for operation (used), 2 units of Traub TNK 65, complete with all accessories. Lodpfxozgnwno Amveac

Condition: used, Year of construction: 1990, turning diameter 250 mm turning length 450 mm control TX8D bore 80 mm spindle speed: 3150 U/min. CNC Lathe with Bar Feed and 3 Turrets Very large spindle bore, with bar loading device Laodjt Hwq Dspfx Amvsc Please ask for further details.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Traub CNC Lathe TNC65DGY, TX8H, 2001 Lajdpfozfkgcjx Amvec • 2x 10-station turrets with VDI30 rotating tool drive • C-axis on main/counter spindle • Y-axis on turret 1 • Hainbuch BZI65 on main/counter spindle Hollow clamping cylinder • Chip conveyor, coolant tank • Spare parts list, circuit diagram, ATC optics Very good condition. Can be viewed under power. The machine's geometry has been checked and corrected/adjusted.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 19,295 h, spindle motor power: 10,700 W, spindle speed (max.): 8,000 rpm, overall weight: 6,000 kg, total width: 2,500 mm, total height: 2,600 mm, bar diameter (max.): 32 mm, travel distance X-axis: 140 mm, controller manufacturer: TRAUB, controller model: TX 8i-p, product length (max.): 4,500 mm, number of axes: 7, This 7-axis TRAUB TNL 32 P was manufactured in 2012. It features a maximum bar diameter of 32 mm and a maximum Z-axis travel of 305 mm. The machine includes two turrets with live tooling capabilities, offering 10 and 9 tool stations respectively. If you are looking to get high-quality turning capabilities, consider the TRAUB TNL 32 P swiss type turning machine we have for sale. Contact us for further details. • Number of Turrets: 2 • Maximum Z-Axis Travel: 305 mm • Main Spindle Torque: 21 / 32 Nm • Main Spindle C-Axis Resolution: 0.001° • Turret 1 Tool Stations: 10 • Turret 1 Live Tool Stations: 10 • Turret 1 Live Tool Speed: 12,000 rpm • Turret 1 Live Tool Power: 1.5 / 2.5 kW • Turret 1 Tool Holder Diameter: 45 mm • Turret 1 Turning Tool Shank: 16 x 16 mm • Turret 1 X-Axis Travel: 140 mm • Turret 1 Z-Axis Travel: 305 mm • Turret 1 H-Axis Resolution: 0.001° • Turret 1 Chip-to-Chip Time: 0.3 sec • Turret 2 Tool Stations: 9 • Turret 2 Live Tool Stations: 9 • Turret 2 Live Tool Speed: 12,000 rpm • Turret 2 Live Tool Power: 1.5 / 2.5 kW • Turret 2 Tool Holder Diameter: 45 mm • Turret 2 Turning Tool Shank: 16 x 16 mm • Turret 2 X-Axis Travel: 140 mm • Turret 2 Y-Axis Travel: -25 / +40 mm • Turret 2 Z-Axis Travel: 320 mm • Turret 2 Chip-to-Chip Time: 0.3 sec Lasdpfxjzcyhxj Amvjc • Counter Spindle Speed: 8,000 rpm • Counter Spindle Power: 1.5 / 2.5 kW • Counter Spindle Torque: 4.5 / 7.7 Nm • Counter Spindle C-Axis Resolution: 0.001° • Maximum Clamping Length: 250 mm • Maximum Bar Diameter (Counter Spindle): 32 mm • Back Working Tool Stations: 8 • Back Working Live Tool Stations: 3 • Back Working Live Tool Speed: 12,000 rpm • Back Working Live Tool Power: 1.5 / 2.5 kW • Back Working Tool Holder Diameter: 36 mm • Rapid Traverse (X / Y / Z): 20 / 20 / 20 m/min • Maximum Feed Rate: 20,000 mm/min • Total Power Requirement: 46 kW • Space Requirement incl. Bar Feeder: 8,000 x 2,500 x 2,600 mm • Chip Conveyor: Optional, not included • Coolant System: Yes • Tool Turrets: 2 • Back Working Unit: Yes • Bar Feeder Interface: Yes • Bar Feeder: LNS Hydrobar Express 332 S2 / 3 m • Electronic Handwheel: Yes • Hydraulic Unit: YesMachine defects: The counter spindle is currently unusable due to prolonged inactivity. Either the sensor or the motor is defective. Technical Specification Counter Spindle Yes Driven Tools Yes Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2017, operating hours: 19,295 h, spindle speed (max.): 8,000 rpm, bar diameter (max.): 32 mm, controller manufacturer: TRAUB, controller model: TX8i-s, number of axes: 9, This 9-axis TRAUB TNL32-9 was manufactured in 2017. It features a main spindle speed of 8,000 rpm and a counter spindle speed of 6,400 rpm. The machine includes dual drive systems and a maximum bar capacity of 32 mm, making it suitable for various turning applications. If you are looking to get high-quality turning capabilities, consider the TRAUB TNL32-9 swiss type turning machine we have for sale. Contact us for further details. • Main Spindle: Motor Spindle • Main Spindle Bore: 32 mm • Main Spindle C-Axis: Yes Laodjzcyabspfx Amvoc • Counter Spindle Bore: 30 mm • Counter Spindle Speed: 6,400 rpm • Upper Tool Carrier: X / Y / Z / H Axis • Lower Tool Carrier: X / Y / Z / H Axis • Tool Positions Upper Carrier: 10 • Tool Positions Lower Carrier: 10 • Dual Drive System: Yes • Long Turning Mode: Yes • Short Turning Mode: Yes • Changeover Turning Mode (W-T): Yes • Internal Coolant Pressure: 20 / 80 / 120 bar • Coolant System: Bürener ECO Fluid • Coolant Tank Capacity: 600 l • Oil Mist Extraction System: Yes • Air Flow Capacity: approx. 1,500 m³/h • Automatic CO₂ Fire Extinguishing System: Yes • Hydraulic Workpiece Gripper: Yes • Counter Spindle Parts Ejector: Yes • Parts Conveyor: Yes • Tool Monitoring System: Yes • Network Interface RJ45: Yes • Voltage: 400 V • Frequency: 50 Hz • Rated Power: 36 kW • Connected Load: 44 kVA • Rated Current: 63 A • Maximum Fuse Protection: 63 A • CE Marked: Yes • Bar Feeder: FMB LSK38 / 3200 C • Bar Diameter Range: 5 - 38 mm • Maximum Bar Length: 3,200 mm • Remnant Length Disposal: up to 600 mm • Feed Direction: Right Side • Material Support Position: Front • Chip Conveyor: Optional, not included Technical Specification Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Traub 700 734 VEMEM/I interface board, used, in good condition, 100% functional, scope of delivery as per photos. Ledpfx Amox Eu Tvevoac

Condition: ready for operation (used), Year of construction: 2017, operating hours: 1,749,535 h, functionality: fully functional, machine/vehicle number: 6060449, turning length: 305 mm, spindle speed (max.): 8,000 rpm, turning diameter: 32 mm, spindle bore: 32 mm, overall weight: 8,000 kg, rotational speed (max.): 8,000 rpm, type of input current: three-phase, bar passage: 32 mm, total length: 3,671 mm, total height: 2,650 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, bar diameter (max.): 32 mm, collet bore: 32 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, input voltage: 400 V, power: 36 kW (48.95 HP), travel distance X-axis: 140 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 305 mm, clamping diameter: 32 mm, controller manufacturer: Traub System TX 8i - s V7, Equipment: documentation/manual, The machine is operational and currently in production. All information can be found in the attachment. The machine is available for immediate delivery. The order confirmation with all information about the machine and the loading magazine is included in the attachment. New price: €444,857.70 (gross) Lajdpfx Ajzc Hmusmvec The machine was originally used as a demonstration model from 2016 to 2020. Please note the operating hours. The machine will be sold including the FMB LSK38 loading magazine. FMB LSK38 / 3200 "C"