Swiss-type cnc lathe

TRAUB TNL 12

Condition: good (used), Year of construction: 2007, CNC Long Turning Lathe Manufacturer: Traub Machine Model: TNL 12 Control System: Traub Year of Manufacture: 2007 TECHNICAL DATA Headstock - Max. bar diameter (mm) 12.7 - Quality of round material (DIN 671) (mm) Ø Xh9 - Max. speed (rpm) 12,000 Max. turning length / headstock travel - with fixed guide bushing (mm) 130 - with rotating guide bushing (mm) 80 - with programmable guide bushing (mm) 80 C-axis resolution (degrees) 0.001 Rapid traverse Z1 (m/min) 30 Tool turret 1 - Slide travel X1 (mm) 35 - Slide travel Y1 (mm) 38 (-10 +28) - Rapid traverse X1 / Y1 (m/min) 15 - Chip-to-chip time (s) 0.3 Tool turret 2 - Slide travel X2 (mm) 35 - Slide travel Z2 (mm) 50 - Rapid traverse X2/Z2 (m/min) 15 - Chip-to-chip time (s) 0.3 Tool drive for tool turret 1 and 2 - Max. speed (rpm) 8,000 - Tools max. (number) 2xG - Clamping diameter for drilling tools (mm) 0.5-7 Counter spindle / front tool holder - Max. bar diameter (mm) 12.7 - Max. longitudinal travel 23, 24 / Xg (mm) 140 / 228 - Rapid traverse 23, 24 / X3 (m/min) 30 - Tool holders (number) 4 - Max. speed (rpm) 12,000 - C-axis resolution (GSP) (degrees) 0.001 Rear tool holder, driven / fixed - Z-axis travel with work spindle (mm) 80 - Tool holder diameter (mm) 20 - Tool holders (number) 3 Rear tool holder (X4 axis) - X4-axis travel (mm) 39 - Rapid traverse speed (m/min) 15 - Tool holder diameter (mm) 28 - Tool holders (number) 4 Tool drive for rear tool holder (with X4 axis) - Max. speed (rpm) 10,000 - Driven tools max. (number) 4 - Clamping diameter for drilling tools - Driven (mm) 0.5 - 7 - Non-driven (mm) 0.5 - 10 Coolant system - Pump pressure, single-stage (bar) 3 - Tank capacity (l) 180 - Delivery rate (l/min) 40 EQUIPMENT FEATURES - Chip conveyor - Bar loader FMB Minimag 18 - High-pressure system - Fire extinguishing system Fpodpfx Adszgczbj Isi Subject to change and errors in technical data and specifications.

Condition: new, Year of construction: 2025, spindle speed (max.): 8,000 rpm, spindle speed (min.): 8,000 rpm, 1 multispindle TORNOS SAS16-DC in rebuilding - new electrical cabinet SIEMENS or FANUC, to choose – pick-up with brake – adjustable stop with counter operation – 3 independent feeding system – several tool-holders and drillings – drum bar with support Fpsdougl S Iopfx Ad Ioi – Options :automatic bar loader IEMCA PRA, numerical tapping, CNC cross slides, etc... Contact us.

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 12.7 [mm] - Max. machining length : 130 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 2.5 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 12.7 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 2.5 [kW] - C axis indexing precision : 0.001 [°] - Number of turrets : 2 UPPER TURRET - Number of positions : 6 - Number of motorized positions : 6 - X stroke : 35 [mm] - Y stroke : -9.5/+28 [mm] - Z stroke : 48 [mm] LOWER TURRET - Number of positions : 6 - Number of motorized positions : 6 - X/Z stroke : 35/79.5 [mm] END ATTACHMENT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 10000 [rpm] - X/Z stroke : 415/138.5 [mm] SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 10000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] EQUIPMENT - CNC : Traub TX8i - Rotating guide bush Fpsdpfxeuhaxfe Ad Isi - Coolant tank - Bar loader : LNS TRYTON HYBRID

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 12.7 [mm] - Max. machining length : 130 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 2.5 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 12.7 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 2.5 [kW] - C axis indexing precision : 0.001 [°] - Number of turrets : 2 UPPER TURRET - Number of positions : 6 - Number of motorized positions : 6 - X stroke : 35 [mm] - Y stroke : -9.5/+28 [mm] - Z stroke : 48 [mm] LOWER TURRET - Number of positions : 6 Fjdpfx Adeuhaw Uj Iopi - Number of motorized positions : 6 - X/Z stroke : 35/79.5 [mm] END ATTACHMENT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 10000 [rpm] - X/Z stroke : 415/138.5 [mm] SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 10000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] EQUIPMENT - CNC : Traub TX8i - Rotating guide bush - Coolant tank - Bar loader : FMB Minimag

Condition: new, Year of construction: 2026, Spindle speed, stepless electronic control: 40-4000 rpm Spindle mount: MK 2 Table height adjustment with rack and pinion Thread cutting capacity, max: M10 Adjustment of thread cutting depth via digital depth gauge Digital speed display Digital drilling depth display Drilling depth stop via stop ring Feed: manual Table height adjustment with rack and pinion Continuous/normal drilling capacity in steel: Ø 13 mm / 15 mm Drilling depth: 60 mm Overhang: 225 mm Column diameter: 60 mm Usable table area (W x L): 330x250 mm Machine dimensions (W x D x H): 420x450x860 mm Machine dimensions (with base): (W x D x H): 452x700x1130 mm Weight: 62 kg Max. distance spindle/table/base: 300/360 mm Motor: AC with frequency inverter, 230 V, 0.54 kW Fedoby Swhopfx Ad Ijpi OPTION: Drilling kit no. 2 - Felix vise, jaw width 80, clamping range max. 120 mm - Quick-change drill chuck 1-13 mm, mount B16 - Taper shank MK II/B16 - Reducing sleeve MK II/MK I Price: € 320 Factory warranty: 3 years Free delivery including packaging (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 - Number of turrets : 1 MAIN SPINDLE - Max. bar diameter : 12,7 [mm] - Max. machining length : 130 [mm] - Spindle speeds : 12.000 [rpm] - Spindle power : 2,5 [kW] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Max. bar diameter : 12,7 [mm] - Spindle speeds : 12.000 [rpm] - Spindle power : 2,5 [kW] LOWER TURRET - Number of positions : 6 - Number of motorized positions : 6 - X/Z stroke : 35/50 [mm] - Live tools speed : 8.000 [rpm] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 12.000 [rpm] Fodpfxouhawze Ad Ispi POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 18 [kW] EQUIPMENT - CNC : Traub TX8i - Interface : RJ45 / PCMCIA - Spindle brake : on main spindle - Parts catcher - Coolant tank : 200 [l] - Chips conveyor : KNOLL - Bar loader : FMB Minimag 3200 C - Number of turning tool holders : 2 - Number of fixed tool holders : 14 - Collets collection for chuck : F20 - Collets collection for chuck : F16 - Sockets : 4 - Set of shells and collets for bar feeder - Set of spare parts

Condition: used, TECHNICAL DETAILS - Number of axes : 7 Fpodpfx Adjuhawuo Isi - Number of spindles : 2 - Number of turrets : 1 MAIN SPINDLE - Max. bar diameter : 12,7 [mm] - Max. machining length : 130 [mm] - Spindle speeds : 12.000 [rpm] - Spindle power : 2,5 [kW] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Max. bar diameter : 12,7 [mm] - Spindle speeds : 12.000 [rpm] - Spindle power : 2,5 [kW] LOWER TURRET - Number of positions : 6 - Number of motorized positions : 6 - X/Z stroke : 35/50 [mm] - Live tools speed : 8.000 [rpm] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 4 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 18 [kW] EQUIPMENT - CNC : Traub TX8i - Interface : RJ45 / PCMCIA - Spindle brake : on main spindle - Parts catcher - Coolant tank : 200 [l] - Chips conveyor : KNOLL - Bar loader : FMB Minimag 3200 C - Number of turning tool holders : 2 - Number of fixed tool holders : 14 - Collets collection for chuck : F20 - Collets collection for chuck : F16 - Sockets : 4 - Set of shells and collets for bar feeder - Tool presetter

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Fpjdpelz Rvljfx Ad Iei Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, TECHNICAL DETAILS - maxi bar diameter : 12.7 [mm] - main headstock strokes (fixed/rotary sleeve) : 130/80 [mm] - spindle power : 4 [kW] - rotation speed : 12 000 [rpm] - upper turret : 6 positions - lower turret : 6 positions - number of rotary positions on turret : 6 - sub-spindle maxi diameter : 12.7 [mm] - sub-spindle rotation speed : 12 000 [rpm] Fpjdpfjuhav Dsx Ad Iei - dimensions : 2850 x 110 x 1480 [mm] - hours in production : 12408 [H] - spindle hours : 9400 [H] EQUIPMENT - CNC TRAUB TX 8i control - bar feeder LNS Alpha ST 320 - C axis on main spindle and sub-spindle - brake on main spindle and sub-spindle - parts catcher with conveying strip - anti fire device - lubricating tank with pump with cooling unit - chip conveyor - various fixed and driven tool holders

Condition: good (used), Year of construction: 2009, functionality: fully functional, CNC Sliding Head Lathe Manufacturer: Traub Machine Model: TNL 12 Control: Traub Year of manufacture: 2009 TECHNICAL DATA Headstock - Max. bar diameter (mm): 12.7 - Bar stock tolerance (DIN 671) (mm): Ø Xh9 - Max. spindle speed (rpm): 12,000 Max. turning length / headstock stroke - With fixed guide bush (mm): 130 - With rotating guide bush (mm): 80 - With programmable guide bush (mm): 80 C-axis resolution (degrees): 0.001 Rapid traverse Z1 (m/min): 30 Tool carrier 1 Fpedpfsy N A S Ujx Ad Ioi - X1 axis travel (mm): 35 - Y1 axis travel (mm): 38 (-10 +28) - Rapid traverse X1/Y1 (m/min): 15 - Chip-to-chip time (s): 0.3 Tool carrier 2 - X2 axis travel (mm): 35 - Z2 axis travel (mm): 50 - Rapid traverse X2/Z2 (m/min): 15 - Chip-to-chip time (s): 0.3 Tool drive for tool carriers 1 and 2 - Max. speed (rpm): 8,000 - Max. number of driven tools: 2xG - Clamping diameter for drilling tools (mm): 0.5–7 Sub-spindle / Front attachment - Max. bar diameter (mm): 12.7 - Max. longitudinal stroke 23, 24 / Xg (mm): 140 / 228 - Rapid traverse 23,24/X3 (m/min): 30 - Tool positions (number): 4 - Max. speed (rpm): 12,000 - C-axis resolution (deg): 0.001 Rear attachment, driven / fixed - Z travel, driven with work spindle (mm): 80 - Tool holder diameter (mm): 20 - Tool positions (number): 3 Rear attachment (X4 axis) - X4 travel (mm): 39 - Rapid traverse speed (m/min): 15 - Tool holder diameter (mm): 28 - Tool positions (number): 4 Tool drive for rear attachment (with X4 axis) - Max. speed (rpm): 10,000 - Max. number of driven tools: 4 - Clamping diameter for drilling tools: - Driven (mm): 0.5–7 - Non-driven (mm): 0.5–10 Coolant system - Single-stage pump pressure (bar): 3 - Tank capacity (l): 180 - Delivery rate (l/min): 40 EQUIPMENT FEATURES - Chip conveyor - FMB Minimag 18 bar feeder - High-pressure system - Fire suppression system Subject to changes and errors in technical data and specifications.

Year of construction: 1996, condition: ready for operation (used), Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 78825h. Documentation available. On-site inspection is possible. Fsdsv Scrhopfx Ad Ijpi

Condition: good (used), Year of construction: 2002, TRAUB TNL 12/7 CNC sliding headstock automatic lathe TECHNICAL DATA Bar capacity: 12 mm Main headstock strokes: 130 / 80 mm Spindle power: 4 kW Speed, main spindle: 12`000 rpm Upper turret: 6 positions Lower turret: 6 positions Fpodpfxet E Dbyo Ad Isi Number of driven tools, turret: 6 Max diameter, counter spindle: 12 mm Speed, counter spindle: 12`000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF OFFER U.A: (list not exhaustive): Traub TNL 12/7 CNC lathe Meyrat high-frequency spindles, 2 pieces Tool holders (driven and non-driven) FMB Minimag 3200 C bar loader Hydraulic unit High pressure pump Chip conveyor Exact scope of supply according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: used, Year of construction: 2008, turning diameter 12,7 mm turning length 50 mm control Traub System TX 8i turning speeds 12000 U/min c-axis 0,001° c-axis 0,001 ° gripping station 12,7 mm speeds 12000 U/min rapid traverse 15 m/min turret (x-stations) 6 worktool system 5+3 worktool system 3 Werkzeugsysteme total power requirement 2,5/4 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,4 x 1,1 x 1,7 m CNC turning machine Traub TNL 12K with barloader LNS Tryton 112 Motor drive S8 (rear working with driven tools possible) Fpodpfxsygm R Ie Ad Ioi Motor drive S7 (front working with driven tools possible)

Condition: used, Year of construction: 2001, turning diameter 340 mm turning length 750 mm control SYSTEM TX 8H spindle passage 80 mm swing over plan sled 530 mm greates pass round over bed 665 mm turning speed range - main spindle 3.150 min/-1 drive capacity - main spindle 22 kW number of tool places 12 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Two machines are available. Price per unit. Machine 1: - Images 1-5 - Operating hours approx. 55,790 h Machine 2: Fjdpfx Adoxwdw Ej Iepi - Images 6-10 - Operating hours approx. 54,347 h Technical Features & Accessories: - Y-axis - Accessory package with rigid and driven tool holders - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: ready for operation (used), Year of construction: 2007, operating hours: 19,441 h, functionality: fully functional, machine/vehicle number: 6000816, turning length: 50 mm, spindle speed (max.): 12,000 rpm, bar passage: 12 mm, controller model: Mitsubishi TX-8i, counter spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 50 mm Main spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12 mm Travel in Z1: 50 mm Workpiece clamping: Collet chuck Counter spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222/139 mm Rapid traverse in X3/Z4: 15 m/min Workpiece clamping: Collet chuck Tool Carrier I (X/Y) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35/37.5 mm Rapid traverse in X1/Y1: 15 m/min Fedpfx Adsx Hxv De Iopi Tool Carrier II (X/Z) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X2/Z2: 35/50 mm Rapid traverse in X2/Z2: 15 m/min Front Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222/139 mm Rapid traverse in X3/Z3: 15 m/min Rear Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Number of driven stations: 4 Travel in X4: 39 mm Rapid traverse in X4: 15 m/min MACHINE DETAILS Control system: Mitsubishi TX-8i Dimensions & Weight Spindle center height above floor: 1,050 mm Dimensions (L x W x H): 1,450 x 1,098 x 1,700 mm Dimensions (L x W x H) with standard coolant tank: 2,355 x 1,098 x 1,700 mm Weight with control cabinet (max. configuration): 2,000 kg Weight without control cabinet (max. configuration): 1,600 kg Weight with control cabinet (min. configuration): 1,200 kg Weight without control cabinet (min. configuration): 850 kg Operating Hours Power-on hours (control): 19,441 h Automatic mode 1: 7,607 h Automatic mode 2: 6,720 h Production time: 38,989 h Total counter: 50,536 h EQUIPMENT Chip conveyor Coolant pump Bar feeder FMB minimag 3200 Workpiece discharge device (tube) Mechanical interface prepared Various fixed holders Rinse gun