Used Traub Tb 42 for sale (108)

Condition: good (used), Year of construction: 2007, Traub TNX 65/42 Milling and Turning Center Mfd. 2007 Serial #7060107 Commissioned in 2010 TX 8i-S control (Mitsubishi/Traub based control with Mitsubishi drives and motors) 15 CNC axis’s (4) X-Y-Z turrets with 10 positions each. Up to 20 tools per turret 65 mm thru hole main and sub spindle (sub spindle has coolant flush) Foot pedal control for clamp/unclamp of spindle chucks Servo driven gantry receiver Hydraulic swivel w/ pneumatic finished part and bar remnant gripper Finished part conveyor belt RESY paper band coolant filter Knoll Coolant tank with BKW refrigerated coolant temperature control 20 Bar High pressure and 8 Bar Low pressure coolant pumps Knoll chip conveyor FMB Turbo 5-55 magazine bar feeder (new in 2010) 2) Single stick turning tool holders 2) Double stick turning tool holders 1) Cut-off tool holder 1) Overdriven double radial live ER Collet tool holder 1) Overdriven radial live ER Collet tool holder 4) Radial live ER Collet tool holders 1) Radial live End Mill tool holder 1) Angle adjustable live ER Collet tool holder 2) Radial live Shell Mill tool holders 2) Axial live End Mill tool holders Guodpfeq Npqmox Ag Dek 6) Axial live ER Collet tool holders 43) Additional tool holders on separate list (see supplemental attachment) Hainbuch main spindle collet chuck Rohm sub spindle 2 jaw chuck 2 Spare sets of spare Z-axis ball screws and bearing packs.

Condition: used, Year of construction: 1996, Traub TNC 42 CNC Lathe with Traub System TX8F Control, Twin Spindle, Twin Turret, (2) x 14 Station ATC, Model TNC 42/65DGY, Collet Chuck, Swarf Conveyor. S/No. 413 (1996), IEMCA Type CNC Boss 542/32 Barfeed. S/No. 97012709 (1997) Driven Tooling Gujdpfx Ajx E Tmhjg Dok Location: These lots are located in Leamington Spa, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), Year of construction: 2001, Ref. -No.: 10551 Manufacturer: TRAUB Type: TNC 42/65 Year of construction: 2001 Type of control: CNC Control: TRAUB TX Storage location: Halberstadt Country of origin: Germany Machine-No.: 93XXXXX Turning Speeds: 8000 RPM X stroke: 450 mm Turning Length: 450 mm Spindle Speeds: 4000 RPM Gjdpfx Agjx A R U Uo Dsuk Clamping Diameter: 42 / 65 mm Spindle Diameter In Front Bearing: 110 mm Tool Taper: 14 Max. Torque: 170 / 230 Nm Rapid Travel Speed X-Axis: 15 m / min Rapid Travel Speed Y-Axis: 6 m / min Rapid Travel Speed Z-Axis: 30 m / min Dimensions Of The Machine (Lxwxh): 4354 x 2076 x 1917 m Chisel slide cross section turning and milling support: 16 x16 ( 20 x20 ) mm Pressure: 70 bar hydraulic tank: 70 L. Total Power Requirement: 39 kVA Weight Of The Machine Ca.: 5,2 t Feed force X-axis at 100% duty cycle: 5000 N Feed path X-axis: 140 mm Z-axis feed path: 450 mm Y-axis feed path: 35 mm Ball screw Z-axis (Ø x pitch): 32 x 10 mm Ball screw X-axis (Ø x pitch): 32 x 5 mm Ball screw Y-axis (Ø x pitch): 25 x 5 mm Further information: - Revolver 1 Number of branches 10 - Revolver 2 Number of branches 14 - Hecowpkfie Htlx Tfefh - Powered tools Yes

Condition: good (used), Year of construction: 2012, functionality: fully functional, Description follows Guodpsx A Hdfsfx Ag Dek

Condition: excellent (used), Year of construction: 1996, operating hours: 46,282 h, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, total height: 2,600 mm, total length: 11,000 mm, total width: 2,000 mm, overall weight: 6,000 kg, controller manufacturer: TRAUB, controller model: TX 8F, counter spindle speed (max.): 4,000 rpm, number of slots in tool magazine: 10, - Includes two 10-position tool turrets with driven tool stations - Includes HAINBUCH chuck system - Includes sub-spindle, bar feeder (manufacturer: STAMAG) - Includes chip conveyor TECHNICAL DATA: - Operating voltage: 400 V - Frequency: 50 Hz - Control voltage: 230 V - Rated current: 85 A - Connection: 54 kW - Connected load: 39 kW - Noise emission value at operator position: 71 dB(A) Ambient conditions: - Temperature: 5 – 40°C - Air humidity: max. 70% - Workpiece removal via sub-spindle - Max. sub-spindle speed: 4000 min-1 - Max. workpiece diameter: 56 mm - Programming: EIA and ISO code Input and output resolution: - X/Z: 0.001 mm - C axis: 0.001° - Rapid traverse: max. 15 m/min - Fine interpolation cycle: 0.34 ms - Largest thread pitch: 999.999 mm - Largest radius: 99,999.999 mm - Feed override: 0…200% - Rapid traverse override: 0…100% - Speed override: 50…120% - Speed input: 5 digits - Cutting speed input: 4 digits Guodpfx Ajwpa Rueg Dek - Tool input: 4 digits - Program number: 8 digits - Subprogram number: 8 digits - Block number: 4 digits - M-functions: 3 digits - B-functions: 6 digits - Memory capacity: 32,000 characters - Tool correction pairs: 40 NUMERICALLY CONTROLLED TURNING AND POSITIONING UNIT (C AXIS): Main spindle: - Max. speed: 80 min-1 - Torque at 100% duty cycle: 100 Nm - Accuracy: +/- 3 min Sub-spindle: - Max. speed: 80 min-1 - Torque at 100% duty cycle: 30 Nm - Accuracy: +/- 3 min TOOL CARRIER 1 & 2: - Driven tools per tool carrier: 10 (14) - Max. speed: 4000 (8000) - Power at 100% duty cycle: 1.5 kW - Power at 15% duty cycle: 4 kW - Torque at 15% duty cycle: 12.4 (4) Nm - Tool holder/tool carrier quantity: 10 (14) - Cylindrical shank as per DIN 69880: Ø 30 x 55 (25 x 48) mm - Chisel cross-section: 20 x 20 (16 x 16) mm - Chip-to-chip time (per VDI 2852): 1.2 s - Switching time one station: 0.6 s - Over 5 stations: 1.5 s SUB-SPINDLE (NUMERICALLY CONTROLLED IN Z DIRECTION): - Max. speed: 4000 min-1 - Max. clamping diameter: 65 mm - Three-phase motor steplessly programmable: 11 kW - Torque: 210 Nm - Feed force at 100% duty cycle: 6000 N - Feed travel: 520 mm - Ball screw operation: Ø 32 x 10 mm HYDRAULICS: - System pressure: 60 bar - Tank capacity: 150 l COOLANT LUBRICATION: - Per tool carrier: 1-stage centrifugal pump - Pump pressure: 5/12 bar - Tank capacity: - without chip conveyor: 300 l - with chip conveyor: 280 l NOTICE: Due to sporadic work, the operating hours may still change slightly.

Year of construction: 1989, condition: ready for operation (used), Spindle bore: 42mm, max. workpiece diameter: 115mm, speed: 3150rpm, power: 9kW, bar length: 5200mm. Machine dimensions X/Y: approx. 2100mm/1000mm, weight: approx. 1500kg. Including bar feeder Stamag D 5000 and various accessories such as collets and feed collets. Documentation available. An on site inspection is possible. Guedpfxoxwn Ihe Ag Dok

Condition: used, Year of construction: 1994, functionality: limited functionality, spindle bore: 42 mm, spindle speed (max.): 4,000 rpm, spindle motor power: 7,500 W, The machine is in continuous operation, producing hydraulic fittings from hexagonal 22 (automatic steel). It is a very rigid and efficient machine for simple components. The machine is equipped with a FETTE tangential thread cutting attachment. Two such machines are available; one is additionally fitted with a side drilling unit and a thread milling attachment with a large set of milling cutters. Both machines come with a large set of tool holders and collets. Price for both machines is negotiable. Gsdpfx Aexq Rz Dog Deuk

Condition: used, Year of construction: 1996, max. bar material dia. 65 mm max. swing diameter 175 mm max. bar length 3.000 mm control System TX 8F travel -x axis 140 mm travel -z axis 520 mm CNC lathe | TRAUB - TNC 42/65 DG equipped with bar loader. Guodpfx Agjxbtq No Dsk The machine is in a well-maintained condition and can be inspected at any time under power. The machine videos from the production plant will be shared on request. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNC65 | TNC-65 |TNC 42-65 DG | TNC 42/65DG

Condition: good (used), Year of construction: 1993, - TRAUB control TX 8F - spindle passage 42 mm - Working spindle speed: 40 - 4.000 1/min Gujdpfx Ageldd Iqe Dok - 4 grooving slides: stroke 60 mm - 8-fold turret - high pressure pump 25 bar - backworking (2 spindles) - bar feeder (3 m) - chip conveyor

Condition: ready for operation (used), functionality: fully functional, spindle bore: 42 mm, turning length: 206 mm, TECHNICAL DETAILS Spindle power: 5.5 - 9 kW Max. workpiece length: 206 mm Spindle bore: 42 mm Tool holder: 4 slots Gusdpfx Agewtq Ufe Djk MACHINE DETAILS Length (L - R): 2,500 mm Width (F - B): 900 mm Height: 1,700 mm

Condition: not inspected (used), Year of construction: 1996, operating hours: 46,282 h, functionality: unexamined, machine/vehicle number: 18770, controller model: TX 8F, clamping diameter: 65 mm, counter spindle speed (max.): 4,000 rpm, workpiece diameter (max.): 56 mm, No minimum price – guaranteed sale to the highest bidder! Payment deadline for the machine is 20.11.2025! Bidding obligates the buyer to collect within the collection period from 01.12.2025 to 05.12.2025! TECHNICAL DETAILS Max. workpiece diameter: 56 mm Max. clamping diameter: 65 mm Max. counter spindle speed: 4,000 rpm Counter spindle power: 11 kW Counter spindle constant power range: 1:8 Counter spindle torque: 210 Nm Tool drive Max. tool drive speed: 4,000 rpm Tool drive power at 100% duty cycle: 1.5 kW Tool drive power at 15% duty cycle: 4 kW Tool drive torque at 15% duty cycle: 12.4 Nm (4 Nm) Number of tool stations: 10 (14) Cylindrical tool holder: ∅ 30 x 55 mm (25 x 48 mm) Tool shank cross section: 20 x 20 mm (16 x 16 mm) Chip-to-chip time: 1.2 s Indexing time per station: 0.6 s Indexing time over 5 stations: 1.5 s Positioning unit X/Z: 0.001 mm Positioning unit C-axis: 0.001° Fine interpolation increment: 0.34 ms Max. thread pitch: 999,999 mm Max. radius: 99,999.999 mm Max. speed (C-axis): 80 rpm Gedpfx Agoxpgl As Deuk Torque (main spindle C-axis) at 100% duty cycle: 100 Nm Accuracy (main and counter spindle C-axis): ± 3 min Rapid traverse and path speed: 30,000 mm/min Rapid traverse: max. 15 m/min Thrust at 100% duty cycle: 6,000 N Travel distance: 520 mm Ball screw size (∅ x pitch): 32 x 10 mm Feed override: 0 – 200% Rapid traverse override: 0 – 100% Spindle speed override: 50 – 120% MACHINE DETAILS Control: TX 8F Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Electrical Data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Nominal current: 85 A Connection rating: 54 kW Power consumption: 39 kW Noise emission at operator position: 71 dB(A) Temperature range: 5 – 40 °C Max. humidity: 70% System hydraulic pressure: 60 bar Hydraulic tank capacity: 150 l Coolant pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Input Spindle speed input: 5 digits Cutting speed input: 4 digits Tool input: 4 digits Program number: 8 digits Subprogram number: 8 digits Block number: 4 digits M-codes: 3 digits B-codes: 6 digits Memory capacity: 32,000 characters Operating hours: 46,282 h (as of 17.10.2025) EQUIPMENT Two 10-station tool turrets with driven tool stations HAINBUCH chuck system Counter spindle Bar feeder from STAMAG Chip conveyor

Year of construction: 1996, condition: ready for operation (used), Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 78825h. Documentation available. On-site inspection is possible. Gjdpfx Agev Scrho Douk

Condition: used, Year of construction: 1989, control / centre distance // mm greates pass round over bed / mm Control: TRAUB System TX-8 Spindle clearance (max. bars ®) mm 42 Chuck © mm 200 Turning diameter mm 180 Turning length mm 450 max. circulation ® mm 450 Rotation ® via sorting device mm 350 Gujdpfjud Inmsx Ag Dsk Rotation ® crosswise tailstock mm 180 Rotation ® over steady rest body mm 240 Longitudinal slide travel mm 490 Slide path flat mm 160 Spindle head DEN 55.026 = 26 - Spindle ® in front bearing mm 85 Power: 41 kW

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 7041138, Traub TNC42/65 No. 7041138 Year 2005 Guodpfjwpkfiox Ag Dok Turret 1 number of stations 10 Turret 2 number of stations 14 Driven tools Yes Spindle speeds 1/min 4000 Spindle speeds on transfer 1/min 4000 Power kVA 39 Weight kg 5200

Condition: excellent (used), Multi-spindle & bar-turning lathes TRAUB TK 42 * Spindle power 5.5 - 9 kW Gujdpfxjwc Aqde Ag Djk * Maximum workpiece length 206 mm * Spindle bore 42 mm * Length L - R 2500 mm * Width V - H 900 mm * Height 1700 mm * Tool changer holder 4 slides

Year of construction: 2015, condition: ready for operation (used), A CNC double-spindle lathe Traub overhauled in 2025 is available. Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 12938h. Including chip conveyor and bar loader LNS Quick Load. Documentation available. On-site inspection is possible. Gusdpfx Asv Scrbeg Dsk

Condition: good (used), Year of construction: 1999, operating hours: 10,170 h, functionality: fully functional, spindle bore: 42 mm, Description follows Gusdpfxex A Ha Hj Ag Dek

Condition: ready for operation (used), Year of construction: 2007, operating hours: 19,441 h, functionality: fully functional, machine/vehicle number: 6000816, turning length: 50 mm, spindle speed (max.): 12,000 rpm, bar passage: 12 mm, controller model: Mitsubishi TX-8i, counter spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 50 mm Main spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12 mm Travel in Z1: 50 mm Workpiece clamping: Collet chuck Counter spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222/139 mm Rapid traverse in X3/Z4: 15 m/min Workpiece clamping: Collet chuck Tool Carrier I (X/Y) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35/37.5 mm Rapid traverse in X1/Y1: 15 m/min Tool Carrier II (X/Z) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X2/Z2: 35/50 mm Rapid traverse in X2/Z2: 15 m/min Front Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222/139 mm Rapid traverse in X3/Z3: 15 m/min Rear Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Number of driven stations: 4 Travel in X4: 39 mm Rapid traverse in X4: 15 m/min MACHINE DETAILS Control system: Mitsubishi TX-8i Dimensions & Weight Spindle center height above floor: 1,050 mm Dimensions (L x W x H): 1,450 x 1,098 x 1,700 mm Dimensions (L x W x H) with standard coolant tank: 2,355 x 1,098 x 1,700 mm Weight with control cabinet (max. configuration): 2,000 kg Weight without control cabinet (max. configuration): 1,600 kg Gjdox Hxv Dopfx Ag Deuk Weight with control cabinet (min. configuration): 1,200 kg Weight without control cabinet (min. configuration): 850 kg Operating Hours Power-on hours (control): 19,441 h Automatic mode 1: 7,607 h Automatic mode 2: 6,720 h Production time: 38,989 h Total counter: 50,536 h EQUIPMENT Chip conveyor Coolant pump Bar feeder FMB minimag 3200 Workpiece discharge device (tube) Mechanical interface prepared Various fixed holders Rinse gun

Condition: excellent (used), manufacturer: GRÜN SYSTEMTECHNIK WETZLER including case We offer an original ATC measuring microscope, originally taken from a TRAUB TNA turning center. The unit is designed for installation in the automatic tool changer and can be used on various CNC machines with a suitable toolholder interface (size comparable to TRAUB TNA400 Key Features & Benefits: • Universal application: Suitable for any CNC machine with compatible toolholder interface. • Fast tool setup: Enables direct measurement of cutting edges, tool lengths, and radii inside the machine. • Process reliability: Tool wear can be identified immediately and corrected without removing the tool. Gusdpjx Hhkwefx Ag Dek • Precise referencing: Useful for checking zero points, bores, and fixtures directly in the setup. • Time savings: Eliminates the need for external presetting devices and reduces downtime. • Compact & robust design: Easy to integrate and operate within the tool changer system. This ATC measuring microscope turns your CNC machine into a precise measuring station, helping you achieve higher accuracy, shorter setup times, and improved process reliability.

Condition: ready for operation (used), Traub 700 734 VEMEM/I interface board, used, in good condition, 100% functional, scope of delivery as per photos. Guedjx Eu Tvepfx Ag Djk

Condition: ready for operation (used), Year of construction: 2014, Main Drive Number of axis 9 Gsdpfxsx D Drco Ag Dsuk Spindle Speed 8000 RPM This 9-axis TRAUB TNL 32 swiss type turning machine was manufactured in 2014. It features a TX8i-s control with a 64-bit RISC CNC/PLC processor, color TFT display, and electronic handwheel. The main spindle supports a 32 mm bore, and the machine includes a sub-spindle with a C-axis. It offers a dual-driven upper tool turret and a lower turret with nine tool holders. Consider the opportunity to buy this TRAUB TNL 32 swiss type turning machine. Contact us for more information. Application Types Turning

Year of construction: 2005, condition: good (used), 7th piece-driven tool holder Suitable for CNC lathe TRAUB TNA 480 tool holder size VDI 40. Also fits SAUTER tool turrets with VDI 40 holder. 7th piece Horizontal No.3/4/5/6/7/8/9/ for drilling and milling Price per piece 550,-€ 2nd piece Horizontal No.1 and No.2 for tapping Price per piece 600,-€ Guedpfx Ajhwnfkog Djk 1.NC - Drill chuck VDI 40 clamping range 1-13mm Price 100,-€ 1.NC - Drill chuck VDI 40 clamping range 2,5-16mm Price 150,-€

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, spindle speed (max.): 12,000 rpm, turning diameter: 32 mm, overall weight: 7,000 kg, rapid traverse Z-axis: 20 m/min, power: 10.7 kW (14.55 HP), Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, C-axis Guedpfx Aox Diglog Dek Upper tool turret with X/Y/Z/H axis and 10 tool holders Lower tool turret with X/Y/Z/H axis and 9 tool holders Rear device with 8-fold total drive for 3 tools Hinged belt conveyor Resy paper band filter Traub tool monitoring FMB LSK 38 – bar feeder

Condition: used, Year of construction: 2011, controller manufacturer: Mitsubishi, controller model: TX-8i, _____ Description: Year of manuf. : 2011 Control : Mitsubishi TX-8i Turning length : 50 mm Mainspindle: Technology:Belt-driven spindle Speed:12.000 rpm Power:4 kW Torque:7 Nm Barcapacity:15 mm Movement in Z1:50 mm Workpiececlamping:Collet chuck Subspindle: Technology:Belt-driven spindle Speed:12.000 rpm Power:4 kW Torque:7 Nm Movement in X4/Z4:222/139 mm Rapid travers in X3/Z4:15 m/min Workpiececlamping:Collet chuck Toolcarrier I (X/Y): Technology:Turret with 6 stations (Complete drive) Taper:ø25 mm Tooldrive:8.000 rpm, 1,5 kW, 2,4 Nm Movement in X1/Y1:35/37,5 mm Rapid travers in X1/Y1:15 m/min Toolcarrier II (X/Z): Technology:Turret with 6 stations (Complete drive) Taper:ø25 mm Guodpfx Agex E Inms Dok Tooldrive:8.000 rpm, 1,5 kW, 2,4 Nm Movement in X2/Z2:35/50 mm Rapid travers in X2/Z2:15 m/min Front attachment: Number of stations:4 Taper:ø28 mm Distance between stations:32 mm Tooldrive:12.000 rpm, 4 kW, 7 Nm Number of driven stations:4 Movement in X3/Z3:222/139 mm Rapid travers in X3/Z3:15 m/min Rear attachment: Number of stations:4 Taper:ø28 mm Distance between stations:32 mm Tooldrive:8.000 rpm, 1,5 kW, 2,4 Nm Number of driven stations:4 Movement in X4:39 mm Rapid travers in X4:15 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Coolant pump Rawmaterialfeed:Bar loader, FMB minimag 20/3200 Finishedpartremoval:Workpiecehandling (Tube) Oilmistseparation:Interface mechanical prepared Toolholder:Misc. static and driven toolholder

Condition: good (used), Year of construction: 1996, CNC turning center TRAUB Type:TNC65 DG Year 1996 Control TRAUB TX8F Gsdpfsu Eug Ijx Ag Douk With lots of accessories.