Swiss-type cnc lathe

TRAUB TNL 12K

Condition: used, Year of construction: 2011, controller manufacturer: Mitsubishi, controller model: TX-8i, _____ Description: Year of manuf. : 2011 Control : Mitsubishi TX-8i Turning length : 50 mm Mainspindle: Technology:Belt-driven spindle Speed:12.000 rpm Power:4 kW Torque:7 Nm Barcapacity:15 mm Movement in Z1:50 mm Workpiececlamping:Collet chuck Subspindle: Technology:Belt-driven spindle Speed:12.000 rpm Power:4 kW Torque:7 Nm Movement in X4/Z4:222/139 mm Rapid travers in X3/Z4:15 m/min Workpiececlamping:Collet chuck Toolcarrier I (X/Y): Technology:Turret with 6 stations (Complete drive) Taper:ø25 mm Tooldrive:8.000 rpm, 1,5 kW, 2,4 Nm Movement in X1/Y1:35/37,5 mm Rapid travers in X1/Y1:15 m/min Toolcarrier II (X/Z): Technology:Turret with 6 stations (Complete drive) Taper:ø25 mm Tooldrive:8.000 rpm, 1,5 kW, 2,4 Nm Itedpfsx E Inmex Ah Nob Movement in X2/Z2:35/50 mm Rapid travers in X2/Z2:15 m/min Front attachment: Number of stations:4 Taper:ø28 mm Distance between stations:32 mm Tooldrive:12.000 rpm, 4 kW, 7 Nm Number of driven stations:4 Movement in X3/Z3:222/139 mm Rapid travers in X3/Z3:15 m/min Rear attachment: Number of stations:4 Taper:ø28 mm Distance between stations:32 mm Tooldrive:8.000 rpm, 1,5 kW, 2,4 Nm Number of driven stations:4 Movement in X4:39 mm Rapid travers in X4:15 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Coolant pump Rawmaterialfeed:Bar loader, FMB minimag 20/3200 Finishedpartremoval:Workpiecehandling (Tube) Oilmistseparation:Interface mechanical prepared Toolholder:Misc. static and driven toolholder

Condition: good (used), Year of construction: 2002, TRAUB TNL 12/7 CNC sliding headstock automatic lathe TECHNICAL DATA Bar capacity: 12 mm Main headstock strokes: 130 / 80 mm Spindle power: 4 kW Speed, main spindle: 12`000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Ijdpfx Ajt E Dbyeh Netb Max diameter, counter spindle: 12 mm Speed, counter spindle: 12`000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF OFFER U.A: (list not exhaustive): Traub TNL 12/7 CNC lathe Meyrat high-frequency spindles, 2 pieces Tool holders (driven and non-driven) FMB Minimag 3200 C bar loader Hydraulic unit High pressure pump Chip conveyor Exact scope of supply according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 19,441 h, functionality: fully functional, machine/vehicle number: 6000816, turning length: 50 mm, spindle speed (max.): 12,000 rpm, bar passage: 12 mm, controller model: Mitsubishi TX-8i, counter spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 50 mm Main spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Itjdpfx Ahjx Hxv Ds Nsb Torque: 7 Nm Bar capacity: 12 mm Travel in Z1: 50 mm Workpiece clamping: Collet chuck Counter spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222/139 mm Rapid traverse in X3/Z4: 15 m/min Workpiece clamping: Collet chuck Tool Carrier I (X/Y) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35/37.5 mm Rapid traverse in X1/Y1: 15 m/min Tool Carrier II (X/Z) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X2/Z2: 35/50 mm Rapid traverse in X2/Z2: 15 m/min Front Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222/139 mm Rapid traverse in X3/Z3: 15 m/min Rear Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Number of driven stations: 4 Travel in X4: 39 mm Rapid traverse in X4: 15 m/min MACHINE DETAILS Control system: Mitsubishi TX-8i Dimensions & Weight Spindle center height above floor: 1,050 mm Dimensions (L x W x H): 1,450 x 1,098 x 1,700 mm Dimensions (L x W x H) with standard coolant tank: 2,355 x 1,098 x 1,700 mm Weight with control cabinet (max. configuration): 2,000 kg Weight without control cabinet (max. configuration): 1,600 kg Weight with control cabinet (min. configuration): 1,200 kg Weight without control cabinet (min. configuration): 850 kg Operating Hours Power-on hours (control): 19,441 h Automatic mode 1: 7,607 h Automatic mode 2: 6,720 h Production time: 38,989 h Total counter: 50,536 h EQUIPMENT Chip conveyor Coolant pump Bar feeder FMB minimag 3200 Workpiece discharge device (tube) Mechanical interface prepared Various fixed holders Rinse gun

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 - Number of turrets : 1 MAIN SPINDLE - Max. bar diameter : 12,7 [mm] - Max. machining length : 130 [mm] - Spindle speeds : 12.000 [rpm] - Spindle power : 2,5 [kW] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Max. bar diameter : 12,7 [mm] - Spindle speeds : 12.000 [rpm] - Spindle power : 2,5 [kW] LOWER TURRET - Number of positions : 6 - Number of motorized positions : 6 - X/Z stroke : 35/50 [mm] - Live tools speed : 8.000 [rpm] END ATTACHMENT Iodpfxjuhawze Ah Njtb - Number of positions : 4 SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 12.000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 18 [kW] EQUIPMENT - CNC : Traub TX8i - Interface : RJ45 / PCMCIA - Spindle brake : on main spindle - Parts catcher - Coolant tank : 200 [l] - Chips conveyor : KNOLL - Bar loader : FMB Minimag 3200 C - Number of turning tool holders : 2 - Number of fixed tool holders : 14 - Collets collection for chuck : F20 - Collets collection for chuck : F16 - Sockets : 4 - Set of shells and collets for bar feeder - Set of spare parts

Condition: excellent (used), Year of construction: 2001, operating hours: 47,600 h, machine/vehicle number: 325, System: TX8H Ijdpjh Dzqlofx Ah Nstb Spindle passage: 80 mm Turning length max: 750mm Turning diameter: 340mm Power: 22kw Number of tool holders: 12 Shaft diameter: 40 Powered tools in all positions X axis Z axis C axis Automatic tailstock chip conveyor

Condition: good (used), Year of construction: 2013, BAR CUTTING MACHINE TRAUB A 25 2013 Turning length: 65 mm Total power requirement: 2 kW Machine weight: approx. 0.7 t Space requirement: approx. 1200 x 700 x 1600 mm Thread length: 40 mm Max. part length: 65 mm Motor speeds: 1400-2800 Itodjwc Amxspfx Ah Njb Bar loader available!

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Load capacity 4,500 kg Overall height 2,705 mm Isdpowvtf Ssfx Ah Netb Lifting height 5,675 mm Mast type Triplex Fork length 2,400 mm Drive Electric Incl. fork positioner Incl. sideshift New UVV inspection & maintenance

Condition: new, High quality benchtop bending machine with a top equipment. FLOTT TB 13 Plus MK II (212503) FLOTT TB 13 Plus B 16 (212500) Standard equipment: - Thread cutting device - Control panel with OLED display - Robust, high quality drill head hood with ergonomically inclined front - LED illumination - Quickly adjustable and ergonomic drill depth stop - Infinitely variable speed control via central rotary knob - EMERGENCY STOP button - Thermal overload protection Itsdpsi Hpyqofx Ah Neb - Spindle stop - Drill protection with electrical fuse - Connection cable with Schuko plug - 3 years warranty for one-shift operation Technical data: Drilling depth (mm): 60 Tapping capacity (depending on pitch): M10 Speed display: Digital Drilling depth display: Digital Drilling depth stop: Stop ring (form fit) Feed (mm/rev): by hand Table height adjustment: with toothed rack motor three-phase current - frequency controlled, mains connection 230 V (kW): 0,54 continuous/normal drilling capacity (mm): 13/15 (in E335/ST60) throat depth (mm): 220 column diameter (mm): 70 Usable working surface (W x L) (mm): 300 x 250 Spindle/working surface (mm): 85-370 (table), 420 (foot) T-slot size (arm), distance (mm), dimension width (mm): Cross grooves, number 2, 14/26 machine dimension without packing (mm): 400 x 520 x 850 machine dimension with packing (mm): 452 x 700 x 1.130 Weight (kg): 62 Note: All other models are available on request.

Condition: new, High quality benchtop bending machine with top of the line features. FLOTT TB 18 Plus (218303) Standard equipment: - Thread cutting device - Control panel with OLED display - Robust, high quality drill head hood with ergonomically inclined front Isdpfx Ahji Hp Ero Netb - LED illumination - Quickly adjustable and ergonomic drill depth stop - Infinitely variable speed control via central rotary knob - EMERGENCY STOP button - Thermal overload protection - Spindle stop - Drill protection with electrical fuse - Connection cable with Schuko plug - 3 years warranty for one-shift operation Technical data: Continuous/normal drilling capacity (mm): 18/20 (in E335/ST60). Tapping capacity (depending on pitch): M12 spindle: MK II drilling depth (mm): 100 throat depth (mm): 240 column diameter (mm): 82 Usable working surface (W x L) (mm): 340 x 280 Speed display: Digital Drilling depth display: Digital Drilling depth stop: Quickly adjustable stop ring Feed (mm/rev): by hand Table height adjustment: with toothed rack motor three-phase current - frequency controlled, mains connection 230 V (kW): 0,75 spindle speed stepless (1/min): 30 - 3000 T-slot size (arm), distance (mm), dimension width (mm): number 2, 125, 13/26 spindle/working surface (mm): 155 - 415 (table), 155 - 550 (foot) machine dimension without packing (mm): 355 x 705 x 1065 machine dimension with packing (mm): 570 x 940 x 1612 weight (kg): 170 Note: For all other models, please feel free to contact us.

Condition: new, Year of construction: 2025, Spindle speed continuously electronically 40-4000 1/min Spindle mount MK 2 Table height adjustment with rack Thread cutting capacity max M10 Setting the thread cutting depth via digital depth display Digital speed display Digital drilling depth display Drilling depth stop via stop ring Feed/by hand Table height adjustment with rack Continuous/normal drilling capacity steel Ø 13 mm / 15 mm Drilling depth 60 mm Throw 225 mm Column diameter 60 mm Usable table surface (W x L) 330x250 mm Machine dimensions (W x D x H) 420x450x860 mm Machine dimensions (with VP) (W x D x H) 452x700x1130 mm Weight 62 kg Max. distance Spindle/table/base 300/ 360 mm AC motor with frequency converter 230 V, 0.54 kW OPTION: Drilling package no. 2 Itjdpfx Aheby Swhe Neb - Vice felix, jaw width 80, clamping range max. 120 mm - Keyless drill chuck 1-13 mm mount B16 - Taper mandrel MK II/B16 - Reducing sleeve MK II/MK I Price: € 320.00 Factory guarantee: 3 years Free delivery including packaging (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!