CNC lathe

Traub TNK 36

Condition: good (used), Year of construction: 2003, CNC turning center TRAUB TNK 36 Year of manufacture: 2003 Control: TX8i (64 bit) Flat screen monitor, 10.4 inches Additional V24 RS232 interface in the control cabinet MDE interface in the control cabinet (machine is running, piece counter) Tool monitoring for thread cutting without compensation chuck Main spindle: Spindle bore 36 mm, maximum speed 6,300 rpm Drive power AC 6.7 / 10.7 kW C-axis Quick-change parts Hainbuch, mounting aid, base body Quick-change device Hainbuch, manual Counter spindle: Counter spindle as a motor spindle with C-axis Device for counter pressure, workpiece ejection device, Axfix chuck Hainbuch Tool holder, top, driven tools, electronic gearbox X3 cross axis for front tool holder, front tool holder, 5-position, driven tools Cut-off station, driven tools Workpiece removal device: Workpiece gripper Ledpfxjzaud As Albsah Gripper jaws D5-8, D8-20, D20-36 Coolant system: Tank 230 l / 7 bar / 50 l/min. Internal coolant supply 30 bar High pressure 120 bar at the front and rear machining stations, vacuum rotary filter Knoll VRF 150/750 (suitable for aluminum, plastic, brass, and steel) Coolant gun Hinged belt chip conveyor, discharge height 950 mm Preparation for installation of bar feeder magazine (guide tube D25, D36) Workpiece stop, rotating (shank 16x16) Collision monitoring Brankamp CMS 100 on main and counter spindle Machine without known defects.

Condition: not inspected (used), Year of construction: 1996, empty load weight: 800 kg, diameter: 1.5 - 160 mm stroke: 400 mm weight: 800 kg Lsdpfxowgm Saj Alboah

Condition: good (used), Machining diameter max: 36 mm Maximum spindle speed: 6300 rpm No. of Spindles: 2 Controller: Traub TX8i Ledpfx Aletrvzxoboah Toolchanger 1: No. of tools: 12 positions X-axis travel: 50 mm Z-axis travel: 50 mm Toolchanger fronside: No. of tools: 7 positions Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 370 mm Z-axis travel: 250 mm Toolchanger backside: No. of tools: 5 Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 73 mm Barfeeder: FMB Turbo 5-42 Barlength: 3200 mm Bardiameter: 5 - 42 mm Country of origin: Germany Machine LxWxH: 3400 x 1300 x 1700 mm Machine weight: 4000 kg

Year of construction: 2000, condition: ready for operation (used), Offered is a CNC lathe Traub. Number of spindles: 2, spindle height above floor: 1130mm, max. turning diameter: 36mm, max. bar diameter: 36mm, max. turning length: 100mm, max. main spindle speed: 6300rpm, max. counter spindle speed: 6300rpm, main spindle power: approx. 10.7kW, counter spindle power: approx. 10.7kW, drive power range: main spindle travel X/Z: 370mm/250mm, counter spindle travel X/Z: 370mm/250mm, tool turret: 12, turret travel X/Z: 50mm/100mm, Y-axis turret: +/-20mm, max. speed of driven tools: 6000rpm, front tool positions: 5, rear tool positions: 5, control: Traub TX 8i. Weight: approx. 4000kg, machine dimensions: X/Y/Z: approx. 3400mm/1300mm/1700mm. Documentation available. Inspection possible by arrangement. Lodpfx Alszidirsbsah

Condition: used, functionality: fully functional, total height: 1,900 mm, total width: 1,200 mm, overall weight: 1,200 kg, input voltage: 400 V, Equipment: documentation/manual, type plate available,

Condition: used, mileage: 945,418 km, power: 132 kW (179.47 HP), first registration: 12/2005, fuel type: diesel, empty load weight: 5,580 kg, maximum load weight: 1,910 kg, overall weight: 7,490 kg, axle configuration: 4x2, wheelbase: 4,200 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, number of seats: 3, loading space length: 6,180 mm, loading space width: 2,400 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, immobilizer system, onboard computer, parking heater, power assisted steering, spoiler, tail-lift, traction control, German vehicle, condition, see photos, BÄR tail lift type: BC 1000S4, load capacity: 1,000 kg, box dimensions: L=6,180 x W=2,400 x H=2,200 mm, right box door with access, 1 row of lashing rails right & left, air conditioning, parking heater, aluminum riffled floor, manual transmission, ABS and ASR, engine brake, comfort driver's seat, air-suspended, electrically heated mirrors, roof hatch, radio CD, roof spoiler, sun visor, wheelbase: 4,200 mm, gross weight: 7,490 kg, unladen weight 5,580 kg, payload: 1,910 kg If a new TÜV inspection is desired, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend a viewing and inspection of the goods, so that the buyer does not have any false ideas about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired.   All details are without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Ljdpfx Ajv Tdngelbeah Changes, prior sale, and errors are reserved. - .

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 1,500 kg, lifting height: 3,000 mm, fuel type: electric, mast type: duplex, High-lift pallet truck, reach truck Load capacity: 1500 kg Lsdpfx Aloui Rbbobjah Lifting height: 3000 mm Length: 1720 mm Width: 805 mm Height: 2040 mm Mast type: Duplex Dead weight: 590 kg Fork length: 1150 mm Year of manufacture: 2026 Operating hours: 0 Condition: new Front tire type: Polyurethane Rear tire type: Polyurethane Battery voltage: 24 V Immediately ready for use Available immediately!

Condition: used, Year of construction: 2001, pressure 130 t chamfer lenght 3060 mm distance between columns 2690 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec table width 120 mm table height 1050 mm tiltable up to +/- 10.0 mm Number of working hours ca. 31.800 h compressed air 5.0 - 7.0 bar oil volume 250 l operating pressure 340 bar Lodeyn R Hvspfx Alboah voltage 400 V total power requirement 23.0 KVA weight of the machine ca. 12950 kg range L-W-H 3660 x 2310 x 2900 mm Equipment: - CNC electro-hydraulic folding/die bending press - DELEM CNC control - swiveling front left * High-resolution graphic screen * Clear, concise menus in the operator's language * Large tools and products library * Graphical 2D programming * automatic bending sequence calculation and collision detection * EMERGENCY stop button at the front - CNC axis adjustment: * Y1 - Y2 - X - R axis CNC crowning * Manual adjustment of the 2x stop fingers, from the front (Z axes) - CNC electro-motorized table crowning - CNC electro-pneumatic die displacement (I axis) - WILA / TRUMPF upper tool clamping - hydraulic - WILA / TRUMPF lower tool clamping - hydraulic - 2x front, robust support arms - movable - 1x freely movable 2-hand/foot control - 1x free-moving foot switch - Lateral safety device (hinged doors) - rear safety device (sliding doors) - original operating instructions ( french )

Condition: good (used), Year of construction: 2000, pressure 40.0 t chamfer lenght 1600 mm distance between columns 1100 mm stroke of upper beam 100 mm throat 195 mm working feed 10.0 mm/sec return speed 70.0 mm/sec 180 bar work height max. 840 mm table width 110 mm dayligth 295 mm Control ATL 550 total power requirement 5.5 kW weight 2500 kg range L-W-H 2100 x 1200 x 1800 mm Equipment: - NC-controlled hydraulic press brake, with torsion shaft - with ATLANTIC NC control - model "ATL 550" * Positioning of the backgauge (X axis) * Positioning of the depth adjustment (Y1 Y2 axis) * Possibility of programming different programs * Memory capacity max. 200 programs - max. 400 blocks * Swivel control panel, left front Lsdpsyk E Umofx Albjah - Electro-motorized backgauge (X axis) * with 2x stop fingers, manually adjustable (R Z axis) - Tool holder system A - with top wedge crowning - Split insert/bending tools - Lateral safety guards - rear safety guard - 1x freely movable double foot switch - Operating instructions (PDF)

Condition: used, mileage: 587,682 km, power: 176 kW (239.29 HP), first registration: 03/2002, fuel type: diesel, empty load weight: 6,680 kg, maximum load weight: 5,310 kg, overall weight: 11,990 kg, tire size: 245/70T19.5, axle configuration: 4x2, wheelbase: 4,815 mm, brakes: constant throttle, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, number of seats: 2, total length: 8,660 mm, total width: 2,550 mm, total height: 3,650 mm, loading space length: 6,250 mm, loading space width: 2,460 mm, loading space height: 2,380 mm, Equipment: ABS, cabin, fog lights, low noise, parking heater, spoiler, tail-lift, trailer coupling, Vehicle location: Bovenden, Lg. House, 1x air seat, double seat bench, 2x couch, electric mirror, heated mirrors, radio, auxiliary heating, switch 8, ABS (anti-lock braking system), constant throttle, roof spoiler, lifting+lowering, fog lights, driving lights, leaf-air suspension, tarpaulin and bows, tow bar air+light, aluminum tank, low-noise G1, tail lift aluminum, upright, environmental badge yellow Wheelbase: 4815 mm Body: tarpaulin/bows and LBW LBW BÄR 1500kg lifting capacity, gearbox partially overhauled in 04/2007. New tarpaulin! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Ledpfxjvhg I Ej Albjah