Used Tos Sui 40 for sale (22,133)

Condition: ready for operation (used), Spindle bore: 60 mm Swing diameter over bed: 500 mm Center length: 1000 mm Dimensions: 3100x1400x1600mm Dodeiqtzkjpfx Aiwjkl

Condition: good (used), turning diameter over bed 430 mm turning diameter over slide rest 220 mm turning length 1500 mm dia. of quill 80 mm Dsdpfey Hxq Uox Aiwskl quill stroke 200 mm taper in tailstock-quill MK-5 turning speeds 14 - 2240 U/min output 12,4 kVA spindle bore 60 mm weight of the machine ca. 2800 kg

Condition: used, Year of construction: 1998, turning diameter over bed 0400 mm turning diameter over slide rest 260 mm turning length 1500 mm Dksdpfjxp Rzbox Aiwsl centre height 200 mm centre distance 1500 mm spindle bore 50,8 mm speeds 20- 3150 U/min feeds longitudinal slide 0,01 - 3,24 mm/U feeds cross slide 0,005- 1,62 mm/U weight of the machine ca. 2 t dimensions of the machine ca. 3,35 x 1,4 x 1,9 m voltage 400 V connected load 7,7 kVA With chuck, Multifix toolholder and digital readout.

Condition: not inspected (used), functionality: unexamined, We are offering this untested TOS Trenčín SUI 50 CNC centre lathe, year of manufacture unknown. Manufacturer: TOS Trenčín Model: SUI 50 CNC Condition: untested Category ID: 1519 Type ID: 2086 Machine type: Centre lathe (lead-screw/feed-screw lathe) Dsdpfjy Nml Eox Aiwskl The machine powers up and the display lights up without any error messages. The chuck can be engaged. Other than the emergency stop button on the machine (see photos), no defects are visible. Unfortunately, I have no experience with this machine and therefore cannot operate it. The machine was still in operation until early 2025. It comes from an insolvency auction and is now for sale. The tools currently installed in the machine will remain in it. A complete operating manual and circuit diagrams are available. The machine is still connected and can be inspected and tested on site. Transportation should ideally be arranged by the customer. Loading by overhead crane is possible. Securing the machine is the buyer’s responsibility. If you have any further questions or require more information, please feel free to send us a message or call us.

Condition: good (used), TOS SUI 50/2000 lathe Dodpfsy D Eclox Aiwskl - Max. turning diameter: 560 mm - Distance between centers: 2000 mm - Spindle bore: 58 mm - Year of manufacture: 1990 Rapid traverse on longitudinal and cross slide

Condition: excellent (used), After repair in 2022. Swing mm 400 Distance between centres mm 1000 Dkodpfx Asyzpycsiwol Grinding wheel: diameter x hole x width mm 500 x 80 x 203 Taper in spindle Morse 5 Max. workpiece weight between centres kg 300 Grinding spindle revolutions r.p.m. 1720, 1980 Cross motion of grinding spindle mm 415 Motor output kW 9,5 Total input kVA 16 Machine dimensions: length mm 4890 width mm 2320 Machine weight kg 5150

Condition: used, total height: 1,700 mm, total length: 6,000 mm, total width: 1,700 mm, Empty weight: 6.500 kg Price: On request Lathe metal lathe Model: Conventional Manufacturer: TOS Type: SUI 63 Serial number: 407620860 Center distance: 4000mm Center height: 325mm Turning diameter: 630mm Spindle passage: 80mm Dkjdpfx Ajwnhy Ieiwsl Spindle speed: 11,2-1800 rpm Machine-afmeting: 6000x1700x1700mm Machine weight: 6500kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 325 - Swing over bed [mm]: 630 - Distance between centres [mm]: 4000 - Spindle bore [mm]: 80 - Min. spindle speed [rpm]: 11.2 - Max. spindle speed [rpm]: 1800 - Transport dimensions: 6000mm x 1700mm x 1700mm (l x w x h) - Transport weight [kg]: 6500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Demonstration machine BUB 40/3000 CNC Control system: Siemens One Digital axis drives Includes comprehensive user software Includes electronic handwheel for X/Z axes Centre height: 400 mm Centre distance: 3000 mm Workpiece weight between centres: 500 kg Longitudinal Z-axis travel: 3250 mm Positioning accuracy X-axis: 0.001 mm Workpiece spindle head taper: MK 5 Tailstock taper: MK 5 Drive power: - Grinding spindle: 11 kW Dksdpfxov N D Hbj Aiwol - Workpiece spindle: 2.5 kW - Total installed: 22 kW Machine in full enclosure Prepared for extraction system, including fittings Separate monitor, touch probe control, automatic balancing, as well as gap/crash control included. 1 grinding wheel: 508 x 80 x 203.2 mm Available immediately. Optional filtration units available in various designs.

Condition: used, machine/vehicle number: 0257391, height of centers: 160 mm distance between centers: 1500 mm grinding wheel measures: 500 x 127 x 40 mm grinding wheel rotations: 1570/2050 Upm Dodpfxjgayiws Aiwokl electrical connection: 380 V kW space needed: 4400/6400 x 2000 x 1400 mm weight: ca. 4000 kg

Condition: excellent (used), control: Heidenhain Positip 850; tool taper: SK 40; hydr. clamping; stroke: 100 mm; Dkodpfslkgvbjx Aiwol table: 800x480 mm travel: x-600 mm, y-400 mm, z-400 mm rapid motion feed: 63-800 mm/min (18 steps) spindle speed: 63-3150 rpm (18 steps) accessories: coolant equipment, collet chuck incl chucks

Condition: used, x-travel 850 mm Dkedoyuqmcopfx Aiwsl y-travel 500 mm z-travel 500 mm taper ISO 40 P.D.B. table-size 400x1250 mm volt 400 V Control Heidenhain TNC 355 total power requirement 7,5 kW

Condition: ready for operation (used), Year of construction: 1993, External cylindrical grinding machine Manufacturer: TOS Type: BUB 40-1000 Year: 1993 Control: Cetos K 51 WORKING AREA CYLINDRICAL GRINDING Dkjdpfxswp D Aus Aiwol Max. swing diameter 400 mm Workpiece weight between centers (max) 500 kg Workpiece weight one-side clamped (max) 100 kg WORKING AREA EXTERNAL GRINDING Max. grinding diameter 400 mm Min. grinding diameter 10 mm Grinding length 1000 mm TABLE – CYLINDRICAL GRINDING Swiveling (B-direction) from 8.5 ° Rotation range B-axis up to -4.5 ° Longitudinal travel 1200 mm WORKPIECE SPINDLE STOCK Swiveling (B-direction) from 0 ° Rotation range B-axis up to 90 ° Spindle bore 40 mm Number of gear stages 2 Drive power 9.5 kW Tool holder MK 5 TAILSTOCK Quill stroke 40 mm Quill fitting MK 5 Contact force (max.) 4 kN GRINDING SPINDLE STOCK Swiveling (B-direction) from -15 ° Rotation range B-axis up to 45 ° GRINDING WHEEL Type: grinding wheel, disc Diameter (max) 500 mm Bore: diameter 203 mm Width 80 mm ELECTRICAL CONNECTION DATA Connected load 16 kVA Connection voltage 400 V Network frequency 50 Hz DIMENSIONS / WEIGHTS Required space -left/right- 4700 mm Required space -front/back- 2050 mm Total height 1900 mm Total weight approx. 5400 kg ADDITIONAL EQUIPMENT (GRINDING) Balancing device yes Machine in well-maintained condition Workpiece spindle stock swivels 90° Grinding spindle stock swivels -15°, +45° Table swivels +8°30' - 4°30' Accessories: - hydrostatic spindle - various corundum grinding wheels - 2 diamond grinding wheels - Balancing head MPM, renewed in 2021 - Filter system - Extraction system

Condition: used, Year of construction: 1997, Control Heidenhain 355 x-travel 850 mm y-travel 550 mm z-travel 450 mm tool taper SK50 weight of the machine ca. 5,5 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Djdped N Smhjfx Aiwekl +++++

Condition: used, machine/vehicle number: 186137200089, used TOS tool milling machine model FNG 40 CNC Year of manufacture: 1988 with Heidenhain path control TNC 155 with fixed angular table 800x400mm Travel paths: X/Y/Z = 500/400/400mm Speed range: 10-3150 rpm Spindle: SK40 Chip guard, attachable Dksdoxf Inkepfx Aiwol Documentation for the machine and control is available. The machine is located in 71334 Waiblingen-Beinstein and can be inspected by appointment.

Condition: good (used), Technical specifications: -table surface: 400 x 1400 mm - longitudinal movement of the table - X axis: 1000 mm - lateral movement of the table - Z: 450 mm -vertical table movement - Y axis: 400 mm -spindle cone: ISO 50 Dkjdpfx Aov E Nafoiwsl -Spindle speed: 35.5 - 1800 rpm total machine power: 11 kW

Condition: good (used), Tool Milling Machine TOS FNGJ 40 with 3-axis Heidenhain Digital Display - Travel paths X/Y/Z: 600x400x400 mm - Automatic feeds and rapid traverse on all three axes - Spindle speeds from 63 to 3150 rpm - Tool holder ISO 40 - Hydraulic tool clamping - Swivel table 800x400 mm - Vertical and horizontal milling device - Swiveling vertical head with quill - Coolant system - Tool trolley + tool holders + milling tools - Counter bearing + horizontal milling spindle - Clamping block for tool holders - Machine feet - Documentation Dimensions (LxWxH): 2.5 x 2 x 2.3 meters / Weight: 2600 kg Subject to errors and omissions. Dkjdpfx Aox H Nx Ajiwol

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 34 63 20 96 006, turning diameter over cross slide: 390 mm, spindle bore: 80 mm, turning diameter over bed slide: 500 mm, spindle speed (max.): 1,800 rpm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely pickup between 28/07/2025 and 31/07/2025. TECHNICAL DETAILS Swing over bed: 500 mm Dedpfewvhxgex Aiwekl Swing over support: 390 mm Distance between centers: 1,800 mm Spindle bore: 80 mm Max. speed range: 18 – 1,800 rpm MACHINE DETAILS Dimensions: 4,000 x 1,800 x 1,900 mm Weight: 5,200 kg EQUIPMENT - SONY digital display - Faceplate (diameter: 500 mm) - 2 steadies

Condition: like new (used), Year of construction: 2024, functionality: fully functional, grinding length: 1,650 mm, grinding diameter: 400 mm, We offer a new BUB40 x 1500 NC machine equipped with a MITSHUBISHI NC controller. The machine is still under lease with ING Lease. It has been thoroughly refurbished based on the TOS HOSTIVAR BUB 40 model by FAS GŁOWNO. Technical data: • Maximum workpiece diameter: 400mm • Maximum workpiece length: 1500mm • Centre height: 200mm • Distance between centres: 1500mm • Minimum grindable workpiece diameter with a 380 mm grinding wheel: 20mm • Tailstock quill stroke: 40mm Dkodpfx Aswzkywjiwel • Maximum tailstock clamping force: 4000N • Spindle headstock centre taper: ISO 296-1991/Morse 5 • Tailstock centre taper: ISO 296-1991/Morse 5 • Maximum workpiece weight between centres: 500kg • Maximum workpiece weight in chuck (including chuck): 100kg • Machine width (with enclosure): 6650mm • Machine depth (with enclosure, without control panel): 2400mm • Machine height (with enclosure): 1850mm • Machine weight: 7000kg • Total power requirement: 38kVA Grinding spindle: • Standard grinding wheel dimensions: 500 x 80 x 203.2mm • Grinding spindle drive motor power: 11kW • Grinding spindle rated speeds (for 430 mm / for >430 mm and 500 mm wheels): 2000 / 1744 rpm • Grinding headstock traverse servo motor power: 2kW • Grinding headstock traverse servo motor torque: 9.5Nm • Maximum continuous X-axis traverse speed: 2m/min • Minimum X-axis grinding wheel increment: 0.001mm • Maximum continuous X-axis traverse speed: 6m/min • Minimum X-axis grinding wheel increment: 0.001mm • Maximum grinding wheel increment in INC mode: 0.1 mm • Table traverse servo motor power: 3.5 kW • Table traverse servo motor torque: 16.7 Nm Workpiece spindle: • Workpiece spindle speed range: 1 – 150 rpm • Workpiece spindle servo motor power: 3.5kW • Workpiece spindle servo motor torque: 16.7Nm More information available upon request via email or phone.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Fixed setting vice with roller quills for SUI 80 TRENCIN Capacity : Dkodpfx Aiou Tvdbswol 210 - 370 mm 365 - 520 mm Only available as a set

Year of construction: 1992, condition: new, New driver ISO40 for milling machines FN 20/32/40 Djdjk Nk I Njpfx Aiwjkl

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 150150900039, center width: 1,500 mm, overall weight: 2,820 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Djdpfxsw Hwure Aiwskl Centre distance: 1,500 mm MACHINE DETAILS Weight: 2,820 kg EQUIPMENT various lathe chucks

Condition: new, New bellows (Führungsbahnabdechkungen) for tool milling machines produced by TOS / INTOS Zebrak. For enquiries, please indicate the exact type of machine. More parts available. Djdpfodx Rfvox Aiwskl

Year of construction: 1998, condition: new, New trapezoidal spindle+nut X-axis, for FN20, FN32, FN40 Dkodpfxsk Nk Iws Aiwsl

Condition: used, Year of construction: 2004, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm number of spindle speeds: 63 - 3.150 1/min feed stepless: 12-3000 / 6-1500 (Z) mm/min quill stroke: 100 mm milling-head swivable +/-: 90° spindle taper ISO: SK 40 surface area: 630 x 400 mm total power requirement: 8 kW Djdpfxsk Hdu Dj Aiwjkl weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2 x 1,9 x 1,95 m universal milling machine with point to point control, mechanical handwheels, swivel - rotary table (mech.) +-45°, hydr. tool clamping, half cabin, coolant device, manuals (German language) *

Condition: good (used), Year of construction: 1990, HEIDENHAIN TNC-355 Working travels 850x500x450mm Table size 1250x500mm Dedpfx Aiofg Ep Dowjkl Spindle taper 50 Spindle speeds 35,5-1800 rpm Misc.accessories MARCELS MASCHINEN CH