Bed milling machine

TOS KUŘIM FS 80 S/A3

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition Gbodpfsw Iq Ugsx Advoi

Condition: excellent (used), Year of construction: 2002, OKUMA Euro Center V50 Year of construction 2002 Control system OSP-U100L Travel distances X-1020 Y-510 Z-525 Table load 680kg Clamping surface 1200x510 Gbedpfxsrfw Nhe Advei Tool changer 20 magazine places chip conveyor

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter (max.): 100 mm, pipe length (max.): 4,100 mm, bending angle (max.): 183 °, bending radius (max.): 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Gbjdpfxotrd T Tj Advei Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR

Condition: ready for operation (used), total height: 3,900 mm, total width: 2,900 mm, total length: 8,000 mm, controller manufacturer: Heidenhain, empty load weight: 13,000 kg, Type: TMML6-centrum Maximale afstand van kolom tot midden van spindel: 1210 mm (diepte van de kiel) Gereedschapswisselaar met 30 posities Spaantransportband Kan achteraf worden uitgerust met nieuwe Heidenhain-besturing Originele tafel kan opnieuw worden gebruikt of een T-gleuf vloerplaat om hogere werkstukken te kunnen bewerken Gbodpfev St Efjx Advei Longitudinal travel X-axe: 3023 mm Crosstravel Y -axe: 800 mm Travel Z-axe (Height): 1528 mm Dimensions clamping space - table: 4200 x 1000 mm Max Height of workpiece: 2000 mm Power on spindle: 20 kW Admission in millingheadspindle (ISO): ISO 50 Max speedrange: 50 > 1980 rpm

Condition: used, TECHNICAL DETAILS TABLE - Table dimensions : 3100/800 [mm] - Maximum weight upon table : 7000 [kg] - Travels on X/Y/Z axes : 3000/1000/1200 [mm] - Rapid traverses rates (X/Y/Z) : 15000/15000/15000 [mm/min] MILLING HEAD Manual head MILLING SPINDLE - Tool holder type : ISO50 * Spindle speeds : 4000 [rpm] * Spindle power : 27 [kW] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 24 WEIGHT & DIMENSIONS - Machine floor space : 7913/5043 [mm] - Machine height : 3440 [mm] - Machine weight : 13410 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 38 [kW] MACHINE HOURS Godpfsw Tnhbex Advobi - Number of hours under power : 24689 [h] - Number of working hours : 23809 [h] - Number of spindle hours : 7658 [h] EQUIPMENT - CNC : Heidenhain iTNC530 - Electronic handwheel Interface : RS232/RJ45/USB - Interactive programming - Coolant tank - Tool-holders

Condition: good (used), Year of construction: 2000, machine/vehicle number: 7853, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, table length: 6,000 mm, table width: 2,000 mm, table load: 17,000 kg, Travelling column milling machine | FPT Sirio-M50 - Heidenhain control system - 60-position automatic tool changer - Coolant treatment and filtration unit Gbjdpjxzzlhofx Advoi - Chip conveyor - Cooling unit, manufacturer Deerosdassi (Italy) - Electrical cabinet - Full machine enclosure (protective housing) An inspection is possible at any time by appointment.

Year of construction: 2007, condition: ready for operation (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, number of axes: 5, This 5-axis TOS Varnsdorf WHN130 was manufactured in 2007. It features a horizontal boring and milling machine with a table size of 1800 × 1800 mm and a spindle diameter of 130 mm. The machine includes a rotary table and is controlled by an NCT-104 system. Consider the opportunity to buy this TOS Varnsdorf WHN130 boring machine. Contact us for more information. Gjdpfxex Imtaj Advsbi • Control system: NCT-104 • Table: rotary, 1800 × 1800 mm • W (spindle quill): 570 mm • Spindle diameter: 130 mm

Condition: excellent (used), Year of construction: 2001, operating hours: 8,155 h, functionality: fully functional, feed length X-axis: 1,800 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,000 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 50 rpm, table width: 850 mm, table length: 2,000 mm, overall weight: 13,500 kg, power: 30 kW (40.79 HP), CME FS-2 bed milling machine with only 8155 hours control Heidenhain 426B incl measuring probe and complete set of manuals Gbedpfxsquqq Ae Advoi

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,000 mm, table width: 1,000 mm, table length: 3,500 mm, ZAYER bed type milling machine in good working condition. Specifications: X-axis travel: 3200mm Y-axis travel: 1200mm Z-axis travel: 1000mm milling head taper: ISO 50 control: Heidenhain TNC410 table size: 3500x1000mm Gbjdpew Uha Hofx Advsi year of manufacture: 1999

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 2,000 mm, table load: 15,000 kg, spindle diameter: 150 mm, spindle speed (min.): 4 rpm, spindle speed (max.): 3,000 rpm, table length: 2,000 mm, table width: 1,800 mm, drill spindle length: 900 mm, HEIDENHEIN iTNC 530. Godev U D Ntspfx Advebi ATC 60, X= 4.000 mm. Y= 3.000 mm. W, Tower= 2.000 mm. Z, Spindle= 900 mm. Rotary Table 1.800 x 2.300 mm, 15 Ton.