Used Tos Fo 16 for sale (15,555)

Condition: excellent (used), I am selling this machine, connected, can be tested. Max. workpiece diameter ..... 1600 mm Kedpfxjv Nqppj Ah Nodg Module ..... 16 - Power of the main electric motor ..... 12 kW Dimensions l x w x h ..... 4300 x 2000 x 3170 mm Machine weight ..... 18500 kg Can send a video of the machine, via whatsapp.

Condition: excellent (used), Max. Wheel Dia: 1600 mm Kodpsv Igc Nofx Ah Nodg Min. wheel Dia: 800 mm Gear width: 560 mm Max. module: 16 Min. Module: 4 Table dia: 1350 mm Table load cap: 7000 Kg Machine weight: ca. 18 Tonnes Machine with change gear, arbors, fixtures set Machine is in excellent condition

Condition: used, functionality: fully functional, wheel width: 800 mm, module 1-6 diameter max 600 mm digital readout Complete machine with documentation, tool holders, change gears, etc. Kdsdpfx Ajxhck Sjh Neg

Condition: used, Year of construction: 1982, Technical details: table length: 2200 mm table width: 2500 mm table load: 16 t total power requirement: 6,5 kW Kdjdpfx Aovb A Uujh Nog feed speeds: 1,25 - 160 mm/min rapid traverse speed: 2000 mm/min longitudinal adjustment: 1500 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 4,1 x 2,65 x 0,95 m

Year of construction: 1989, condition: excellent (used), machine/vehicle number: 0435532, MACHINE DATA Machine type Hobbing Cutter – Gear cutter Manufacturer TOS Model FO-10 Kdjdpfx Ahsd R Ri Uo Nsg Year 1989 Serial Number 0435532 Condition Very good-almost new Yet in operation Max Module 14 Min Module 1.5 Max diam. 1500mm Max Width 450mm From Z9 teeth until Z448 Main drive 12 Kw Weight 9800Kg Original color RAL 6017 Book operation – service Dimensions L 3200 – W 1800 – H 2530 Full extra accessories – parts – all module cutters Ready to work without any expensive PRICE 70.000€

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, machine/vehicle number: 50052, Year of manufacture: 1970 Serial number: 50 052 The machine was overhauled in 2007. Kdodpjxxwy Ajfx Ah Neg GENERAL CHARACTERISTICS OF THE MACHINE The machine features a fixed gantry with a moving table. The gantry is equipped with a height-adjustable crossbeam, which can be fitted with one or two vertical spindles in the VF 120 version. The gantry can also be fitted with one or two side-mounted (horizontal) VF 160 headstocks. The clamping surface consists of two interconnected clamping tables, which can also be used individually when disconnected (only one table can be operated at a time). Clamping Table: Dimensions of one table: 1,600 x 3,000 mm Total length of connected tables: 7,000 mm Clamping surface of connected tables: 6,500 mm Clamping T-slots (width x pitch x number): 28 mm x 160 mm x 9 pcs Table height from base: 900 mm Travel of one table: 3,000 mm (connected tables: 6,500 mm) Table feed rate: 20 – 2,000 mm/min Rapid traverse: 4,000 mm/min Gantry with height-adjustable crossbeam: Clearance between side columns: 2,020 mm Crossbeam height adjustment: 110 - 1,685 mm Crossbeam feed rate: 1,450 mm/min VF 160 Horizontal Headstock: Taper: ISO 60 Motor power: 30 kW Speed range: 15 – 710 rpm Feed rate: 10 – 2,000 mm/min Number of speeds: 16 VF 120 Vertical Headstock: Taper: ISO 50 Motor power: 18 kW Speed range: 28 – 910 rpm Number of speeds: 16 Overall machine dimensions (L x W x H): 14,780 mm x 5,650 mm x 4,800 mm

Condition: used, Maximum grinding length: 1000 mm Ksdpfx Ahjv Taafj Nsdg Maximum wheel diameter: 320 mm Bore: 30 mm Manufacturer: TOS

Condition: used, mileage: 107,937 km, Year of construction: 2012, Field of application: Freight transport Serial number: VF6MKN5JE4768xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20871 Specifications: - 2012 model - 107,937 km (will increase slightly) - Automatic transmission - Euro 5 engine - 125 hp - Summer tires included - Winter tires included - 4x2 - Front-wheel drive - Serviced by owner - 16+1 - Alcolock - Air conditioning/ac - Lights - Radio - Ready for delivery Description: We have a 2012 Renault DCI 125 minibus w/ seating for 16+1 for sale. Everything works as it should according to the owner. Services have been performed by the owner himself at his own workshop. It comes with winter tires with the car. Delivery by arrangement. Km: 107937 HK: 125 Technical approved: Yes EU-approved until: 25.08.2026 Own weight: 2643 Total Weight: 3870 Payload: 1152 Width: 207 Length: 619,8 Kdjdpfx Ahjwv I Ius Njg Euro: 5 Model: DCI 125 Gearbox: Automatic Number of seats: 16

Condition: good (used), Hydraulic valve, pressure valve, filling valve, pre-fill valve -Manufacturer: Rexroth, Filling valve type ZSF 160 FO-1-14/M/01 -Classification: NG160ZSF-160F1-1 -Nominal size: 160, A B, mechanically operated -Connections: G 1 1/4" / G1/2" -Individual components: see photos -Overall dimensions: 470/310/280 mm -Weight: 49 kg Kodpfx Ahot Ultij Nodg

Condition: new, Year of construction: 2026, Combined saw-milling machine minimax st 3c F 16 Swiveling saw blade, swiveling milling spindle and format sliding carriage made of anodized aluminum Sturdy cast steel construction Large support surface and precise cast table High-precision sliding carriage made of anodized aluminum (travel 2250 mm) Large trimming frame (900 x 600 mm) with telescopic aluminum fence extendable up to 2660 mm with professional stop flaps Max. Saw blade Ø 315 mm with scoring device, tiltable from 90° - 45 Saw parallel fence with fine adjustment Stable saw unit and large dimensioned double cradle milling unit guarantee highest stability, precision, smooth running and long service life Solid and precise machine table made of stress-free gray cast iron Three milling speeds, manually adjustable from 3500 - 10000 min-¹ Kdedpfx Aohp Rdlsh Nsg With right-left rotation of the milling spindle Standard arc milling protection hood Safety turning stop jaws made of aluminum Two motors with high power reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx. 470 kg Connection suction Suction port diameter 2 x 120 mm Suction port diameter saw blade guard 60 mm Electrical data Power drive motor 2 x 5,0 kW Supply voltage 400 V Mains frequency 50 Hz Milling spindle spindle inclination 0 - -45 ° useful length of spindle 100 mm spindle speeds 3500/7000/10000 min-¹ Milling tool diameter max. not lowerable 210 mm lowerable 180 mm tenon milling 275 mm K

Condition: like new (used), Year of construction: 2017, operating hours: 41 h, load capacity: 1,600 kg, lifting height: 2,850 mm, fuel type: electric, mast type: duplex, construction height: 1,920 mm, Options: VERY unique CONTRA stacker! Equipped with: - MAST with tilt function - CANTILEVER adjustable forklift forks - SUITABLE for all types of pallets Kdedpfxsx Rt R Ds Ah Nog - POWER STEERING!!!

Condition: new, empty load weight: 4,400 kg, maximum load weight: 11,600 kg, overall weight: 16,000 kg, axle configuration: 2 axles, suspension: air, tire size: 550/45R22,5, wheelbase: 1,200 mm, Equipment: ABS, additional headlights, fog lights, Steindl Palfinger forestry trailer 16 tonnes | Articulated drawbar with 2 cylinders, gearbox support foot, | 10 stanchion holders welded to the outside of the frame, 4 pairs of stanchions, | LED Stvo lighting system | Tires 550/45-22.5, FLAP-DOWN | Extendable frame, HEXAGONAL FRAME | 4 drum brakes o350mm for 8-hole rim - swing arms with wheelbase 1.20m | Pneumatic brake system with 2 Tristop cylinders and 2 diaphragm cylinders including wheel chocks, | License plate lighting and type approval 25 km/h | Bottom hitch | Support load: 2,000kg Errors, input and advance sales reserved. Steindl Palfinger forestry crane L | Standard equipment 9.5m RW including 4.5 tonnes flange rotator | 4-tab load sling (EPS-LINK), EPSILON crane column | Swivel mechanism with 4 swivel cylinders 2-circuit hydraulics CAN-BUS joystick control with 2 x 4-way control blocks electrically proportionally controlled including high stand, tarpaulin and high pressure filter, including BSZ plus an AUTEC radio remote control Hydraulic oil tank with 100 litres of hydraulic oil Hydraulic oil cooler with thermostat control Lifting cylinder protection Forestry package: Chainsaw, canister and sapling holder Headlight kit with 2x LED (1000 lumens) 2-rotary piston pump with console for universal joint drive and hydraulic oil 2x40 lt/600 rpm including screwed flange universal joint shaft Wood grapple with opening width 157 cm (0.30 m2), with flange rotator, reinforced version Kjdpfxerm S D Eo Ah Nodg

Condition: ready for operation (used), Year of construction: 2010, A Donaldson filter system including a cyclone with fan is available. 1) Donaldson DFO 4-16-Rm filter unit, year of manufacture: 2010, power: 18.5kW, weight: approx. 1600kg. 2) Cyclone with Donaldson/Rucon FQ 561/N4 RD 0 centrifugal fan, year of manufacture: 2010, speed: 2920 rpm, temperature: 60°C. The filters are somewhat corroded. Documentation available. On-site inspection is possible. Kjdpfx Ahswzx S Us Nodg

Condition: new, Year of construction: 2018, functionality: fully functional, Hello we offer here a brand new climate outdoor unit from Toshiba. The device was built in 2018 but was never installed. The device has 45kW. Kdedpfx Aelc Eukoh Neg

Year of construction: 2019, condition: ready for operation (used), Length: 5650mm, width: 2960mm, height: 1850mm, with documentation, without lifting device and roller conveyer, an inspection is possible. Kedpfxjp R R H Ij Ah Nedg

Condition: excellent (used), Catalogue number 7804 TECHNICAL DATA - Track width: 350mm - Shaft width: 330mm - Mounted blade: 300mm - Max blade diameter: 400mm - Blade bore diameter: 70mm Ksdpfx Asxvb S Rjh Njdg - Max cutting height with 400mm blade: 150mm - Table dimensions: 2240x770mm – From above: - kickback/retractors - slip roller - retractors - smooth slip roller - shaft with saw blades - 2 slip and pressure shafts – From below: - roller in front of the table - guide - pawls - track - central track lubrication - electric raising of saw blade shaft 0.75kW - electric raising of machine body 0.75kW - variable feed speed adjustment - Extraction nozzle diameter: 320mm - Main motor: 45kW - Overall dimensions (L/W/H): 2280x1820x2040mm - Weight: 2850kg ADVANTAGES – Czech production – Used multi saw machine – Technical documentation (DTR) – Very good condition Net price: 62,900 PLN Net price: 14,970 EUR depending on EUR rate 4.2 (Prices may change with significant fluctuations)

Year of construction: 1996, condition: ready for operation (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, spindle speed (max.): 2,500 rpm, number of axes: 5, This 5-axis TOS WHN 13.8 boring machine was manufactured in 1996. It features a working spindle diameter of 130 mm, X-axis travel of 3500 mm, Y-axis travel of 2000 mm, and a Z-axis travel of 1250 mm. The rotary table clamping surface measures 2200 x 1800 mm, supporting a maximum workpiece weight of 12,000 kg. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 machine we have for sale. Contact us for more information. Kjdpfsyar D Hex Ah Nedg Machine Benefits Technical Machine Benefits • Rotary table clamping surface: 2200 x 1800 mm Extra Information Working spindle diameter: 130 mm Technical Specification Taper Size ISO 50

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,400 mm, This 3-axis TOS KUŘIM FS 100 S/A3 vertical machining centre was manufactured in 2002. Consider the opportunity to buy this TOS KUŘIM FS 100 S/A3 vertical machining centre. Contact us for more information. Kdsdpfx Asyar A Aoh Nog Additional equipment • Additional Documentation: User manual available Machine Benefits Technical Machine Benefits • Feed rates: standard: 1 to 5000 mm/min / rapid traverse (y and z axes): 10 m/min/ feed rate: 12 m/min • Worktable: size: 1000 x 3000 mm / maximum workpiece weight: 7000 kg / number of t-slots: 7 / distance between t-slots: 140 mm / t-slot width: 22 mm / table height from the base (floor): 900 mm • Spindle: spindle taper: iso 50 / spindle diameter at the front bearing: 85 mm / minimum spindle distance from the worktable: 125 mm / maximum spindle distance from the worktable: 1775 mm / spindle speed: 16 to 3500 rpm (stepless)

Condition: excellent (used), CATALOGUE NUMBER: 7480 Technical data: - Track width: 360mm - Shaft width: 350mm - Max. disc diameter: 350mm - Disc bore diameter: 80mm - Max. cutting height: 120mm - Table size: 2040x1220mm Top section: - Pawls - Driven, toothed shaft - Pawls - Shaft with saw blades - Slip/pressure shaft Bottom section: - Rollers in front of the table, 2 pcs - Guide rail - Pawls - Track - Central track lubrication - Electric lifting of the saw shaft - Electric body lifting - Stepless feed speed control - Extraction port diameter: 140mm, 160mm - Main motor: 30kW - Overall dimensions (L/W/H): 2600x2300x1850mm - Weight approx. 4000kg Kodpfx Ahjuzu T Te Nodg ADVANTAGES – Czech manufacture – Used multirip saw – Very good condition Net price: 33,900 PLN Net price: 8,070 EUR (depending on the 4.2 exchange rate) (Prices may change with significant fluctuations)

Year of construction: 2003, condition: used, tank capacity 160 l Kjdpen Tvg Eofx Ah Nodg feed pressure 160 bar weight / kg

Year of construction: 1980, condition: used, turning diameter over bed 655 mm turning diameter over slide rest 390 mm turning length 1250 mm spindle bore 82 mm spindle turning speed range 9-1120 U/min feeds 0,049-3 mm/U total power requirement 12 kW weight of the machine ca. 5,2 t required space 3,5 x 1,9 x 1,7 m m Kdsdpfxolc Uk Io Ah Neg

Year of construction: 1980, condition: ready for operation (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, controller manufacturer: HEIDENHAIN, controller model: 426, spindle speed (max.): 2,500 rpm, table length: 1,800 mm, table load: 12,000 kg, table width: 1,800 mm, number of axes: 4, This 4-axis TOS WHN 13.8 CNC boring machine was manufactured in 1980 and retrofitted in 2001. It features a working spindle diameter of 130 mm, a clamping cone 50 ISO, and a spindle speed of 2500 rpm. The machine supports a table load capacity of 12000 kg and includes SIEMENS motors and drives. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 CNC machine we have for sale. Contact us for more information. Kodjx U Ttmopfx Ah Nsdg Machine Benefits Qualitative Machine Benefits • Retrofitted in 2001 • Refurbished in 2024 • 6-month warranty on mechanical parts Technical Machine Benefits • Working spindle diameter: 130 mm • Clamping cone: 50 iso Extra Information Machine still under power / 6-month warranty on mechanical parts // Scope of refurbishment (2024): ■ Cleaning the machine ■ Checking and adjusting the machine geometry ■ Regrinding the spindle cone ■ ...possibility of replacing the spindle for an additional fee ■ Checking the machine's functionality ■ Revision of the electrical equipment ■ Revision of the hydraulics and lubrication ■ Adjustment of clearances and optimization of drives ■ Replacement of the guide surface wipers ■ Repair of the telescopic machine cover ■ Replacement of the balancing ropes ■ Repair of the platform ■ Revision of the cooling CHZ13

Condition: used, Year of construction: 2013, machine/vehicle number: HL11816-00-7307, Empty weight: 3.220 kg Lifting capacity: 300 kg Kdedex U Rf Hjpfx Ah Nog Working height: 1.400 cm Front tyres / undercarriage remaining: 40 Rear tyres remaining : 40 Tyre brand: - Transport dimensions (LxWxH): 2.49x1.65x2.69 Please contact PFEIFER GROUP for more information

Condition: excellent (used), Year of construction: 1996, turning diameter 380 mm Kdodpfxjx U Encs Ah Nsg turning length 750 mm control HEIDENHAIN ManualPlus total power requirement 9 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,4 x 1,7 x 1,7 m

Condition: good (used), Year of construction: 1980, TOS FNGJ 32 Milling Machine Year of manufacture: 1980 Equipped with Heidenhain TNC 135 control Kdsdpfx Aex U Eb Aeh Nsg With accessories Table size: 800x400 mm Spindle speeds: 40–2000 rpm Longitudinal and cross feeds: 8–400 mm/min Vertical feeds: 4–200 mm/min Distance from horizontal spindle axis to table surface: 125–525 mm Distance from vertical head spindle axis to table surface: 58–458 mm X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm