Used Tos W 100 A for sale (89,628)

Condition: excellent (used), Year of construction: 1998, CN Heidenhain TNC 430 PA Maximum spindle torque: 900 Nm Maximum feed force in the X, Y, Z axes: 25,000 N Maximum workpiece weight: 2,500 kg (at 1 m table length) Table dimensions: 1,000 × 14,000 mm Number of T-slots in the table: 7 T-slot width × spacing: 22H7 × 140 mm Longitudinal travel (X): 12,000 mm Cross travel (Y): 1,000 mm Vertical travel (Z): 1,500 mm Horizontal spindle: Minimum distance between the horizontal spindle axis and table surface: 275 mm Maximum distance between the horizontal spindle axis and table surface: 1,775 mm Vertical spindle: Minimum distance between the vertical spindle face and the table: 50 mm Maximum distance between the vertical spindle face and the table: 1,550 mm Spindle taper: ISO 50 Spindle diameter: 85 mm Tool clamping force in the spindle: 16,500 N Main machine dimensions: Length: 17,850 mm Width: 5,640 mm Width with enclosure: 6,720 mm Height: 4,350 mm Floor space required: 73 m² Total machine weight: approx. 34,000 kg Electrical cabinet weight: approx. 820 kg Mains voltage: 50 V (3 × 400) Ijdpfsxdwkfjx Abnsif Total machine power: 100 kVA Fuses to be provided by the customer outside the machine for 400 V Hydraulic unit weight without oil: 150 kg

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, spindle diameter: 100 mm, spindle speed (min.): 7 rpm, spindle speed (max.): 1,120 rpm, total height: 3,000 mm, total length: 6,000 mm, total width: 3,000 mm, table length: 1,250 mm, table width: 1,250 mm, type of input current: three-phase, spindle stroke: 900 mm, overall weight: 14,000 kg, year of last overhaul: 1999, Machine in excellent condition, used only for small operations. Condition of the slides: very good. Its green color is still the original. Functional and available quickly. Equipped with a Heidenhain visual display and measuring scale, on 4 axes: X/Y/Z/B. Tooling included with this machine: see the photos below. Great deal, priced below market value. Technical specifications: 🔹 Spindle Spindle diameter: 100 mm Spindle taper: ISO 50 Spindle travel (W-axis): 900 mm Rotation speed: 7.1 to 1,120 rpm Main motor power: 11 kW to 15 kW 🔹 Travels X-axis (Longitudinal): 1,600 mm Y-axis (Vertical): 1,120 mm Z-axis (Cross): 1,250 mm W-axis (Spindle travel): 900 mm 🔹 Rotary Table Table surface: 1,250 × 1,250 mm Maximum allowable load on the table: 3,000 kg (3 tons) Table rotation: 360° (manual or motorized) 🔹 Facing Head Facing head diameter: 600 mm Max. boring/facing diameter: 900 mm Facing head speed: 7.1 to 224 rpm Facing head slide travel: 210 mm 🔹 Dimensions and Weight Overall dimensions (L × W × H): ~ 6,000 × 3,000 × 3,000 mm Isdpozunfbefx Abnoif Total machine weight: ~ 14,000 kg (14 tons)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 4.6209, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,120 mm, travel distance Z-axis: 1,750 mm, table load: 3,000 kg, spindle diameter: 100 mm, spindle speed (max.): 1,120 rpm, workpiece weight (max.): 3,000 kg, The last conventional machine standardly produced by TOS VARNSDORF Solid design Also available in CNC version RET100B and the overhauled machine W100A-R MAIN PARAMETERS Workspindle diameter 100 mm Clamping taper 50 ISO Spindle speed range 1120 rpm Table transversal travel (X) 1600 mm Headstock travel (Y) 1120 mm Table longitudinal travel (Z) 810 / 1250 / 1750 mm Spindle stroke (W) 900 mm Iiodofk I Niepfx Abnef Table clamping surface max. 1500 x 1500 mm x mm Table loading capacity max. 3000 kg

Condition: used, Year of construction: 1992, spindle diameter 100 mm x-travel 1500 mm y-travel 1250 mm Ijdeyqvmyspfx Abnoif z-travel 1800 mm turning speeds 7,1-1120 U/min table surface area 1200x1200 mm w-axis 800 mm Radial face slide 600 mm radial face slide travel 200 mm digital readout Heidenhain The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2024, For sale: Professional water treatment and preparation unit – UWS Heaty Profiline 100 No 2. This is a mobile device designed for use in heating systems, water installations, and HVAC service. Perfect for flushing, filling, and treating installations. Equipment is in excellent technical condition, fully complete and ready for operation. ⚙️ Technical data: Manufacturer: UWS Technologie GmbH Model: Heaty Profiline 100 No 2 Year of manufacture: 2024 Power supply: 230 V / 50–60 Hz Power: 0.5 kW Weight: approx. 59 kg Max. operating temperature: 80°C Max. pressure: 6 bar 🔧 Equipment features: - Integrated tank - High-quality EBARA pump - Flow meters - Pressure gauges - Control valves - Mobile transport trolley - Documentation and accessories (as seen in the photos) 🔍 Condition: - Used device - Very good technical condition - Minor, normal signs of use - Fully complete ⚠️ Remarks: - One pressure gauge has a damaged housing/cover (visible in the photos) - Operation of this pressure gauge has not been checked - The part can be easily replaced if needed Iedpfx Aoyz Dhzobnjif 📦 Applications: - Heating installations - Water installations - Service and cleaning of installations - HVAC systems 🚚 Delivery: - Pallet shipping available - Collection in person possible

Condition: used, Year of construction: 1998, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 15 m/min, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, torque: 1,200 Nm, controller manufacturer: SIEMENS SINUMERIK 840D, workpiece weight (max.): 18,000 kg, total height: 4,950 mm, total length: 10,270 mm, total width: 5,640 mm, table width: 1,000 mm, table height: 800 mm, table length: 6,000 mm, table load: 18,000 kg, rotational speed (min.): 16 rpm, rotational speed (max.): 3,200 rpm, overall weight: 21,000 kg, spindle speed (max.): 3,200 rpm, spindle motor power: 22,000 W, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, FFQ 100W-A6(A8) CNC – TOS KUŘIM Machining Center, Table Length 6m (8m) Control System: Siemens 840 C Availability: According to selected refurbishment Warranty: According to selected refurbishment Can be supplied as used, after medium repair, or after general overhaul, including modernization. FFQ 100W-A6(A8) CNC – Technical Specifications: Basic Machine Data: Manufacturer: TOS Kuřim Overall Length: 10,270 mm Overall Width: 5,640 mm Overall Height: 4,950 mm Total Weight: 21,000 kg Total Connected Load: 40 kVA Working Range: Longitudinal Travel X-axis: 4,000 mm (6,000 mm) Cross Travel Z-axis: 1,000 mm Vertical Travel Y-axis: 1,400 mm Iodexp Iz Sopfx Abnsif Horizontal Spindle Head with Extendable Quill: Tool Taper per ČSN 22 0433 ISO 50 Max. Power: 22 kW Speed Range: 16 – 3,200 rpm Number of Speed Steps: Infinitely variable Max. Torque: 1,200 Nm Quill Diameter: 170 mm Quill Extension: 400 mm Quill Working Feed Range: 1 - 2,000 mm/min Quill Rapid Traverse: 4,000 mm/min Max. Quill Feed Force: 10,000 N Spindle Head (IPS head): Tool Taper per ČSN 22 0433 ISO 50 Max. Power: 22 kW Speed Range: 16 – 3,200 rpm Number of Speed Steps: Infinitely variable Max. Torque: 1,200 Nm Machining H-V, spindle automatically adjustable to vertical or horizontal position Feed Range X – Y / Z: Number of Steps / Range: Infinitely variable / 1 – 5,000 mm/min Rapid Traverse Y – Z / X: 10,000 / 15,000 mm/min Table: Table Area: 1,000 x 6,000 mm (8,000 mm) Max. Load: 3,000 kg/m2 Tool Magazine: Number of Positions: 40 pcs Control System: SIEMENS 840 C Details upon request.

Condition: used, Year of construction: 1992, spindle diameter 100 mm x-travel 1500 mm y-travel 1250 mm z-travel 1800 mm turning speeds 7,1-1120 U/min table surface area 1200x1200 mm Ijdpfx Abeyqwazonoif w-axis 800 mm Radial face slide 600 mm radial face slide travel 200 mm digital readout Heidenhain The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2020, 1. WEISHAUPT WM-G10/4-A, (with gas duct) - Output: 100-1100 kW - Design: ZM-LN - Year of manufacture: 2020 2. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 100-1000 kW - Design: ZM - Year of manufacture: 2015 (1 unit), 2013 (2 units available) 3. WEISHAUPT WM-G10/2-A Design: ZM-LN Output: 75-630 kW Year of manufacture: 2021 4. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 125-900 kW Iiodpfx Abowgyrtensf - Design: ZM-LN - Year of manufacture: 2011 5. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 100-1000 kW - Design: ZM - Year of manufacture: 2011 6. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 100-1000 kW - Design: ZM - Year of manufacture: 2009

Condition: used, Year of construction: 2000, Boring machine Manufacturer: TOS Type: VARNSDORF WHQ 13.8 CNC Year of manufacture: 2000 CNC control: Heidenhain 426 Completely overhauled in 2022 Report available Travel ranges: X/Y/Z: 3,500 x 2,500 x 1,250 x B800 mm Number of axes: 5 Table length: 2,200 mm Table width: 1,800 mm Clamping area: 1,800 x 1,600 mm Table load: 12 tons Number of tool positions: 60 Spindle shank: SK 50 Iiodpfx Absx A Ayienef Spindle diameter: 130 mm Spindle speed: 2,500 rpm Power: 90 kW Handwheel Heidenhain Telescopic guard completely overhauled with a new wiper. Dimensions: L x W x H approx.: 7,500 x 6,950 x 4,000 mm Weight: 40 tons 22726

Condition: used, Year of construction: 1983, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,050 mm, spindle speed (max.): 1,400 rpm, year of last overhaul: 2014, Conventional lathe Brand: TOS Varnsdorf Iodpfxszlfl Te Abnjif Type: W9A Year of manufacture: 1983 Electrical cabinet overhauled in 2014 (see photos) Spindle speed: 28–1400 RPM Travel (X-Y-Z): 1400x1250x1050 mm Digital readout

Condition: used, Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K with MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG and Load Cell TC-LC100KN.G02 (100 kN) The testXpert III 1.6 software serves as control and evaluation software for ZwickRoell materials testing machines. It enables standardized test procedures, logs measurement data, and supports traceability, among other features. Windows 11 Compatibility: ZwickRoell’s testing software (especially testXpert III) supports current Windows platforms, allowing use with Windows 11. Product Description: For sale is a high-quality materials testing system, consisting of: - Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Load Cell TC-LC100KN.G02 (100 kN) The system comes from laboratory usage and was employed for mechanical materials testing at ambient and high temperatures. All devices are used, well-maintained, and fully functional. Technical Highlights – Zwick/Roell Testing Machine Type: BTC-FR100SW.A4K Maximum test force: 100 kN AC drive 4 kW, widened stand design (W) Supply: 400 V / 50–60 Hz / 3Ph+N+PE, power consumption 9 A Working area: Height 1,765 mm, Width 1,030 mm Crosshead speed: 0.0005 – 1000 mm/min Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Isdpfezizlqsx Abnjif Test force range: 0.4–100% (Class 1) / 2–100% (Class 0.5) according to ISO 7500/1 Power requirement: 5.0 kVA Load frame height: approx. 2.32 m Machine weight: approx. 1,820 kg Load Cell: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Technical Highlights – MAYTEC High-Temperature Furnace Maximum temperature: 1200 °C 2 separately controllable heating zones Power: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Load Cell TC-LC100KN.G02 Nominal force: 100 kN Protection rating: IP67 Precise force measurement to ISO 7500/1 Weight: 20 kg, GTM design Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG Load Cell TC-LC100KN.G02 (100 kN) Connection cables and mounting accessories (if available) (Specifications and technical data may be subject to change and errors.) Further questions can be answered by phone.

Condition: excellent (used), For sale: a professional pneumatic-hydraulic press by Mäder with a maximum pressing force of 100 kN (approximately 10 tons). The machine is designed for industrial applications, including pressing, assembly, stamping, crimping, straightening, and other workshop and production tasks. The press utilizes compressed air and a pneumatic-hydraulic system. It is equipped with foot pedal control for easy operation during work. Technical specifications: Manufacturer: Mäder Type: pneumatic-hydraulic press Pressing force: 100 kN / approx. 10 tons Operating pressure: 6 bar Total stroke: 50 mm Hydraulic stroke: 5 or 10 mm – depending on the version Frame overhang: approx. 300 mm Maximum working clearance: approx. 200–270 mm, adjustable Work table dimensions: approx. 310 × 220 mm T-slot width: 16 mm Mounting hole in the ram: Ø20 H7 × 34 mm deep Ram diameter: Ø40 mm Weight of the press itself: approx. 311 kg Working medium: filtered compressed air Noise level: below 75 dB Ijdpfxjzucxce Abnoif Control: foot pedal The machine is sold with the table shown in the pictures.

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, TRACKED SINGLE-SHAFT MULTIBLADE SAWMILL TOS SVITAVY PWR 401 450/160, 75 kW MOTOR Note: Fitted with new guides and a new chain (the replacement cost was quite significant – 36,000 PLN) TECHNICAL DATA - Track width: 450 mm - Shaft width: 420 mm - Mounted blade: 400 mm - Maximum blade diameter: 450 mm - Blade bore diameter: 80 mm - Maximum cutting height with 450 mm blade: 160 mm - Table dimensions: 2230 x 860 mm Top side: - Anti-kickback pawls - Slipper shaft - Anti-kickback pawls - Smooth slip roller Iiedpfxjy Nxdys Abnof - Hold-down - Shaft with bushing and nut - Hold-down - 2 slip/hold-down shafts Bottom side: - Roller before the table - Guide rail - Pawls - Track chain - Central track chain lubrication - Electric rise and fall for sawshaft - Electric body lift: 0.75 kW - Infinitely variable feed speed – new 2.2 kW inverter installed - Extraction port diameter: 280 mm - Main motor: 75 kW - Overall dimensions (L/W/H): 2360 x 2000 x 1960 mm - Weight: 3250 kg ADVANTAGES - Czech manufacture - Used multiblade saw - Overhead operator’s control panel - Full technical documentation (DTR) - Very good condition - We can provide a warranty for the equipment

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition Ijdpoyc H I Sofx Abneif • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: used, Year of construction: 2021, functionality: fully functional, 1. unit steelroller Ø140 mm 2. combi unit - rubberroller and electronic segmented pad, eps system working widt 1100 mm_ working height 3-160 mm - belt size 1900 X 1120 MM total 30 kw - total kg ca. 1900 Ijdpfx Ajym Rl Nebnsif

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,000 mm, feed length Z-axis: 1,500 mm, spindle diameter: 130 mm, table load: 25,000 kg, table length: 2,200 mm, table width: 2,200 mm, overall weight: 36,000 kg, power: 37 kW (50.31 HP), We are offering this TOS HULIN WD130A boring machine from 1998 in very good condition. Manufacturer: TOS HULIN Model: WD130A Year of Manufacture: 1998 Condition: Very good Machine Type: Boring Machine Ijdpfxjymmgpe Abnoif If you have any questions or require further information, you can send us a message or call us.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, The machine is in very good technical condition, operational, and accurate. 4 axes. Includes accessories! Main technical parameters: Spindle diameter: 100 mm Spindle taper: ISO 50 Isdpfx Abezuy Smonoif Spindle speed: 16 – 1250 rpm Table clamping area: 1000 × 1120 mm Table transverse travel (X-axis): 1250 mm Spindle head vertical travel (Y-axis): 900 mm Table longitudinal travel / stroke (Z / W-axis): 1000 mm Maximum table load: 3000 kg Main electric motor power: 20 kW Machine dimensions (L × W × H): 6130 × 3600 × 2750 mm Machine weight: 13,400 kg

Condition: excellent (used), Year of construction: 2009, Horizon brochure production system Horizon VAC 100 a, VAC 100m collating machine Number of stations: 2 x 10 Maximum format: 500 x 350 mm Minimum format: 148 x 120 mm Loading capacity: 55 mm per station Speed: max. 9,500 cycles/h Weight: 320 kg per tower Machine dimensions: 810 x 652 x 1,961 mm Power supply: 230 V, 10.6 A, 2.3 kW SPF 200A booklet folding station Iedpfxoyhzubj Abnjif Input format (4-page sheets): min. 180 x 105 mm, max. 508 x 356 mm Finished booklet format: min. 85 x 105 mm, max. 250 x 356 mm Booklet thickness: max. 25 sheets, 100 pages Speed: up to 4,800 cycles/h Weight: 782 kg (with front cutter FC-200A) Machine dimensions: 3,450 x 810 x 1,250 mm (L x W x H) Power supply: 230 V, 5.3 A; 1.0 kW Trimmer FC 200A Available from 05/2026

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, Wendelmixer Diosna W401A - machine for 400 kg of dough - 2 speeds - control panel with program memory - 4 bowls - machine after refurbishment, in excellent condition - year of manufacture 2012 + Diosna HK1200 dough tipping device with drive and bowl scraper - complete with safety cage - year of manufacture 2020 Iedpfx Aoztz E Eebnjif

Condition: used, Year of construction: 1988, control Heidenhain 355 tool adaptor SK50 weight of the machine ca. 8 t Ijdpfx Absf Tdvbjneif +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), For sale is a Karl Süss HR 100 Analyse – a high-end, manual measurement and testing station designed for the analysis and contacting of semiconductor wafers and microelectronic components. The device is used in laboratories, research and development departments, and during scientific research. The station is equipped with a precise measurement table with fine adjustment, a sample holder with a vacuum function, and a mechanical lifting mechanism. It also has connections for compressed air and vacuum, which ensures stable mounting of the components being tested during measurements. Technical data: Manufacturer: Karl Süss Iijdpfjzl H Aysx Abnsf Model: HR 100 Analyse Device type: manual testing station (Wafer Probe Station) Application: analysis and testing of semiconductor wafers and microelectronic components Vacuum function for sample mounting Precise measurement table Connections for compressed air and vacuum Condition: used, as shown in the pictures.

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, spindle speed (max.): 450 rpm, workpiece weight (max.): 5,000 kg, working width: 2,000 mm, spindle diameter: 105 mm, TECHNICAL DETAILS Swing diameter over bed: 1,050 mm Working width: 2,000 mm Working depth: 1,050 mm Max. workpiece weight: 5,000 kg Spindle diameter: 105 mm Spindle bore: 105 mm Spindle speed: 2.24–450 rpm Thickness: 105 mm Iiodpjy Rxrtsfx Abnof Distance between centers: 2,000 mm Max. workpiece weight: 5,000 kg MACHINE DETAILS Motor power: 22 kW Dimensions & Weight Dimensions (L x W x H): 4,900 mm x 1,900 mm x 1,700 mm Weight: 8,000 kg Control: Conventional EQUIPMENT Four-jaw chuck Steady rest

Year of construction: 1981, condition: ready for operation (used), Travel X/Y/Z/W: 1000mm/900mm/800mm/710mm, speed: 1400rpm, spindle diameter: 90mm, table dimensions: 1250mm/1250mm, max. table load: 3000kg, motor power: 7.5kW. X/Y dimensions: approx. 5500mm/7500mm, weight: approx. 11000kg, control: Newall DP700. Documentation available. Iisdpfx Abet Hkh Asnsf

Year of construction: 1969, condition: refurbished (used), BORING TOS TYP: 100A Iijdpfxehiarqs Abnsf YEAR 1969

Condition: used, Year of construction: 2017, operating hours: 2,115 h, functionality: fully functional, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 50 rpm, rapid traverse X-axis: 8,500 m/min, rapid traverse Y-axis: 8,500 m/min, rapid traverse Z-axis: 7,000 m/min, overall weight: 2,708 kg, We offer this used TOS OLOMOUC FNG-40 CNC A milling machine, manufactured in 2017. Iiodpfx Asy Rbb Robnof Type: FNG-40 CNC A Serial number: 404 100 008 Year of manufacture: 2017 Weight: 2708 kg If you have any further questions or require additional information, please do not hesitate to send us a message or call us.