Used Tos Sui 40 for sale (22,117)

Condition: excellent (used), CATALOG NUMBER 7587 Dodjy N Rfijpfx Aiwsut Technical data: - Shaft width: 410 mm - Number of knives: 3 pcs - Brake - Table length: 2540 mm - Cast iron tables - Both tables adjustable - Original cast iron fence, angle-adjustable - Motor: 3 kW - Dimensions (L/W/H): 2540x1000x1050 mm - Weight: 730 kg Advantages: – Made in Poland – 3-knife shaft – Used jointer – Very good condition Net price: 7,900 PLN Net price: 1,880 EUR Net price calculated according to exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: good (used), Year of construction: 2000, Cast Clamping Angle Plates Manufacturer: Tos - STOLLE Year: approx. 2000 1x Clamping surface width: 1200 mm, height: 3000 mm, depth: 1200 mm, 12 slots: 20 mm Grid spacing: 250 mm, wall thickness: 75 mm, approx. weight: 3000 kg, price: €7,250 negotiable 1x Clamping surface width: 1300 mm, height: 2000 mm, depth: 1500 mm, wall thickness: 80 mm Approx. weight: 3000 kg, price: €5,250 negotiable 1x Clamping surface width: 680 mm, height: 800 mm, depth: 375 mm Grid spacing: 70 mm, slots for M16, approx. weight: 500 kg, price: €2,350 negotiable 1x Clamping surface width: 340 mm, height: 1000 mm, depth: 400 mm Grid spacing: 100 mm, slots for M16 thread, approx. weight: 500 kg, price: €2,150 negotiable Dujdpfxjy Ix Ngs Aiwot

Condition: good (used), Year of construction: 1982, functionality: fully functional, Table dimensions: 1400 x 1000 mm Djdpfsy Iwf Hsx Aiwout Table rotates from 0 to 360 degrees Spindle taper: ISO40 Spindle swivels Minimum spindle speed: 90 rpm Maximum spindle speed: 2880 rpm Machine height: 3260 mm Machine length: 2650 mm Machine width: 2600 mm Machine weight: 5100 kg Accessories, equipment: - Built-in rotary table - Rapid traverse - Motorized height adjustment - Machine light The machine is in very good condition.

Condition: ready for operation (used), Tos SN 55 B Conventional Lathe with Digital Readout and Safeties Swing diameter over bed: 540 mm Swing diameter over support: 300 mm Spindle bore: 75 mm Turning length: 1600 mm Dimensions: 360x150x180 cm (LxWxH) With feed on X and Z axis With steady rests With extra jaws Duodpfx Ajylpqhjiwot With safety features With removable carriage section With coolant pump With Mitutoyo digital readout 380v Location: Budel, Netherlands Transport: negotiable upon request Call or email for more information. Also check out our other listings. We are looking for industrial machines throughout the year. Do you have machines available? Send us photos and information. The seller is not liable for any typographical or data transmission errors. The machine's appearance, technique, and wear correspond to its age; used machines are sold without warranty. The displayed price is exclusive of VAT (unless otherwise stated).

Condition: good (used), Tos Hostivar cylindrical grinding machine Type: 1U X-path: 900 mm bed: 900 x 140 mm Turning diameter bed: 260 mm Chuck diameter: 120 mm Diameter grinding stone max: 320 mm Dujdpfxeq H Ap Ns Aiwjt Dimensions: 150x105x140 cm LxWxH

Condition: excellent (used), I offer a professional vacuum pump from the renowned German manufacturer Becker, model VT 4.40. This device is designed for industrial use and is characterized by high reliability and maintenance-free operation. The pump features oil-free (dry-running) technology, which means it does not require oil and minimizes operating costs. Ideal for applications where cleanliness and stable vacuum are required. The visual condition is very good. The device is complete. Technical data: Manufacturer: Becker, Germany Model: VT 4.40 Duodpfxsyxgt Is Aiwet Year of manufacture: 2007 Capacity: approx. 40 m3/h at 50 Hz Vacuum: up to approx. 150 mbar absolute Motor power: approx. 1.25 kW Power supply: three-phase Speed: approx. 1420–1700 rpm Weight: approx. 38–40 kg Applications: CNC machines and vacuum tables vacuum packaging wood industry printing and graphic arts material handling Advantages: oil-free operation – no oil service required quiet and stable performance robust industrial construction long vane life Made in Germany

Condition: good (used), functionality: fully functional, Type: H 63 A Manufacturer: TOS Dsdpfxoy Rgr Uo Aiwsut Specifications: Axis travels: X: 1000 mm Y: 710 mm Z: 1000 mm Working spindle extension (W): 560 mm Spindle diameter: 63 mm Spindle taper: Morse 4 Table clamping area: 800 x 800 mm Main motor power: 5.5 kW Dimensions: 4050 x 2100 x 2280 mm Machine weight: 4500 kg

Condition: used, mileage: 531,668 km, power: 338 kW (459.55 HP), first registration: 07/2021, fuel type: diesel, empty load weight: 6,806 kg, maximum load weight: 11,194 kg, overall weight: 18,000 kg, tire size: 315/70 R 22.5, next inspection (TÜV): 12/2026, brakes: intarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, total length: 25,500 mm, total width: 39,700 mm, total height: 62,520 mm, Year of construction: 2021, front tire size: 315/70 R 22.5, Equipment: air conditioning, differential lock, navigation system, parking heater, spoiler, Auxiliary air conditioning, work lights, electrically adjustable and heated exterior mirrors, car phone hands-free system for mobile phones, differential lock, electric windows left and right, long cab with high roof, air-suspended driver's seat, leaf-air suspension, radio device, 12 speeds, automatic transmission, climate control: automatic climate control + auxiliary air conditioning, refrigerator, leather steering wheel, multifunction steering wheel, navigation system, entertainment: navigation device with screen, sleeper cab, 2 berths, driver's seat heating, sun visor, spoiler package, standard auxiliary heater, fuel tank capacity 550 + 290 liters, safety package: adaptive cruise control + emergency brake assist + lane keep assist, auxiliary brake Intarder, Euro 6 D engine, LED tail lights, LED headlights, adaptive cruise control, PTO (power take-off). Dedpfoy Rauisx Aiwsut

Condition: excellent (used), Year of construction: 2008, GRASSAIR RLR 40 8B Screw Compressor Atlas Copco screw module Technical specifications: Capacity: 5.30 m³/min (5,300 L/min); Motor power: 30 kW; Max pressure: 8 bar; Operating hours: 12,847 h; Year: 2008; Compressor is fully operational. Dsdow Niprjpfx Aiwjut Net price: 12,200 PLN Gross price: 15,006 PLN Link to video below.

Condition: good (used), Year of construction: 1989, functionality: fully functional, Centre height: 250 mm Dodpjy Nx H Uefx Aiwsut Centre distance: 2000 mm Max. workpiece weight: 500 kg

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, TRACKED SINGLE-SHAFT MULTIBLADE SAWMILL TOS SVITAVY PWR 401 450/160, 75 kW MOTOR Note: Fitted with new guides and a new chain (the replacement cost was quite significant – 36,000 PLN) TECHNICAL DATA - Track width: 450 mm - Shaft width: 420 mm - Mounted blade: 400 mm - Maximum blade diameter: 450 mm - Blade bore diameter: 80 mm - Maximum cutting height with 450 mm blade: 160 mm - Table dimensions: 2230 x 860 mm Top side: - Anti-kickback pawls - Slipper shaft - Anti-kickback pawls - Smooth slip roller - Hold-down - Shaft with bushing and nut - Hold-down - 2 slip/hold-down shafts Bottom side: - Roller before the table - Guide rail - Pawls - Track chain - Central track chain lubrication - Electric rise and fall for sawshaft - Electric body lift: 0.75 kW - Infinitely variable feed speed – new 2.2 kW inverter installed Dedpey Nxdysfx Aiwout - Extraction port diameter: 280 mm - Main motor: 75 kW - Overall dimensions (L/W/H): 2360 x 2000 x 1960 mm - Weight: 3250 kg ADVANTAGES - Czech manufacture - Used multiblade saw - Overhead operator’s control panel - Full technical documentation (DTR) - Very good condition - We can provide a warranty for the equipment

Condition: used, mileage: 258,000 km, power: 290 kW (394.29 HP), first registration: 06/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, loading space length: 6,900 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, tail-lift, We are very pleased that we have aroused your interest with our offer and can already assure you that you can buy a good and reasonably priced vehicle with a traceable service history from us! MB ANTOS 2540 with certified Spier sliding tarpaulin body Rear load securing LBW 2,000 KG AHK Dsdpfx Aijwz T Eceweut LENKACHSE 315 / 60 R 22.5 tires PAYLOAD: 14,450 KG GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING On request, we will be happy to provide you with a LEASING-MIET PURCHASE or FINANCING OFFER. SERVICE TÜV-HU / UVV LBW / LGS-PRÜFUNG / tacho check / installation of OBU device and service by our MARKENWERKSTATT on site TOLL / ROAD CHARGES Tolls can be booked on site. ARRIVAL / DISTANCES Wittlich train station 500 m away Frankfurt airport 150 KM away Frankfurt-Hahn airport 40 KM away Luxembourg airport 75 KM away Sale according to our AGBs. The details on the Internet are non-binding descriptions. They do not represent guaranteed properties. The seller is not liable for typing and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: excellent (used), Year of construction: 1981, Table-type boring mill Manufacturer: TOS Model: W100A Year of manufacture: 1992 Condition: used Price & Location Location: Germany, Rostock Offer details Description Spindle diameter: 100 mm X-travel: 1500 mm Y-travel: 1250 mm Z-travel: 1800 mm Speed: 7.1–1120 rpm Table size: 1200x1200 mm Duodpfey Nmnmox Aiwst W-axis: 800 mm Ram: 600 mm Ram travel: 200 mm Digital readout: Heidenhain Milling head with tailstock (counter support)

Condition: good (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, table load: 12,000 kg, total height: 3,900 mm, total length: 7,200 mm, total width: 5,200 mm, table length: 1,800 mm, table width: 1,600 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, feed rate Z-axis: 8,000 m/min, rotational speed (max.): 2,000 rpm, Table type boring mill TOS VARNSDORF - WHN 13 CNC MACH-ID 9612 Make: TOS VARNSDORF Type: WHN 13 CNC Control: Heidenhain TNC415 X - Travel: 3500mm Y - Travel: 2000mm Z - Travel: 800mm W - Travel: 1000mm Table Length: 1800mm Table Width: 1600mm Table load: 12 Speeds / ranges:2000Rpm Power: 37kW Spindle Taper: ISO50ISO/Bt/Mk Feed rate X-Axis:8000mm/min. Feed rate Y-Axis:8000mm/min. Feed rate Z-Axis:8000mm/min. Feed rate W-Axis:8000mm/min. Length: 7200mm Width: 5200mm Height: 3900mm Weight: 34500kg Dedpfx Asy H Daheiweut Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, mileage: 599,000 km, power: 290 kW (394.29 HP), first registration: 05/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 04/2027, color: silver, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, * Medium-length cab * Reversing camera * Constant throttle * Navigation system * Adaptive cruise control * Attention Assist * Active Brake Assist * Lane Keeping Assist * Automatic transmission * Fully air-suspended * Differential lock Djdpfxjy Nglxs Aiwsut * Air conditioning * Heated seats * Euro 6 Combined with 2-axle refrigerated semi-trailer: * Manufacturer: Rohr * Cargo area dimensions: 13,600 x 2,500 x 2,150 mm * Payload: 21,860 kg * First registration: 05/2017 * Frigoblock refrigeration unit HK 25-2 * 2,000 kg Bär tail lift * Trideck steering * Aluminum floor * Reversing camera * Mercedes Benz axles * Disc brakes * Air suspension ----Special equipment: Front axle load 8.0 t, driver's airbag, work lights, Bluetooth comfort audio navigation system, exhaust outlet down right, passenger side exterior mirror with maneuvering position, battery 220 Ah, bi-xenon headlights, compressed air connection in cab, aluminum air tank, air horn, driver assistance system: Attention Assist (fatigue detection sensor), tinted windscreen with band filter, alternator 150 A, 12.7 cm info display with additional readout, integral rear, mounting plate / saddle plate 40 mm for fifth wheel coupling, front engine PTO prepared for Frigoblock, reinforced engine brake, parameterizable special module, acoustic reverse warning (external warning signal), low-maintenance fifth wheel coupling, circuit breaker, cab seats: comfort driver's air suspension seat, sunblind for side window, driver's door, 24V / 12V 10A inverter, additional 24V socket in passenger footwell, CB radio preparation, preparation for cool box / refrigerator, additional thermal insulation, auxiliary heater (water) Further equipment: Emissions standard EURO 6, axle configuration: 4x2, 24V / 15-pin trailer socket, Antos, electrically adjustable and heated exterior mirrors, rear axle differential lock, medium compressed air unit, driver assistance system: Active Brake Assist, driver assistance system: Lane Keeping Assist, cab width: 2.30 m, cab: hydraulic tilting mechanism, cab: M ClassicSpace, cab: steel-sprung, standard, cab: reinforced (Sweden), cab floor with engine tunnel 320 mm, suspension: leaf / air, front spring support aluminum, front springs 7.5 t, 2-leaf, electric window lifters, 12-speed gearbox - Type: G 211-12, urea tank (AdBlue): 60 l, manual steel sunroof, rear axle crown wheel 440, body/chassis: tractor unit, central locking system, 3-piece mudguard, 390 l aluminum fuel tank, unregulated power steering pump, front air intake, engine 10.7 l - 290 kW R6 Diesel (OM 470), engine compartment encapsulation, wheelbase 3,700 mm, ramp mirror, spare wheel, residual heat utilization, disc brakes front and rear axles, seat cover/upholstery: fabric, cab seats: co-driver function seat, front splash guard, front axle stabilizer, 24V socket in cab, tachograph / EC recording device, aerodynamically shaped underride guard, underrun protection front, toll recording preparation, cranked front axle, regulated water pump, permissible gross weight 18.00 t

Condition: used, Year of construction: 2005, x-axis 4000 mm y-axis 2500 mm z-axis 1600 mm Dsdpfsy Hxp Rsx Aiwsut w-axis 800 mm Control Heidenhain iTNC 530 table-size 1800 x 2200 mm table load capacity 20 t In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Machine in good working condition, 3-jaw chuck, including tool holders. Clamping plate 800 mm Max. working diameter mm 1100 Max. working height mm 795 Max. working weight kg 4000 Z axe mm 750 Spindle revolutions 500 rpm Machine dimensions mm 5630 x 4265 x 4530 Djdsy Hq Npjpfx Aiwsut Machine weight kg 13500

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, oil tank capacity: 400 l, year of last overhaul: 2025, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6780 x 1800 x 2100 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Dusdpsw U Dt Njfx Aiwot Scope of delivery: 1 baler with wire roll boxes, without wire 1 set of machine documentation Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 1,740 mm, total width: 1,740 mm, total length: 2,090 mm, overall weight: 1,725 kg, Equipment: documentation/manual, The machine is in very good condition – it was used as a training machine until 2018; since then, it has rarely been in operation. Operating voltage: 380 V. Spindle mount: ISO 40. Quill stroke: 100 mm. Spindle speeds: 40 - 2000 rpm. Rotary table. Duedpfx Aow Urirjiwst

Condition: good (used), Hohner Economy 25/40 Wire Stitcher Very good condition. A reliable machine with legendary durability. Dusdsy Hgi Sopfx Aiwst Technical specifications: Capacity: 206 cycles/min Sewing thickness: 25mm (punching up to 40mm without closing the staple from the bottom) Wire diameter: max. 1mm Power supply: 380V Weight: 240kg The machine has an adjustable table for block and booklet stitching.

Condition: used, mileage: 277,000 km, power: 301 kW (409.25 HP), first registration: 08/2010, fuel type: diesel, axle configuration: > 3 axles, color: green, gearing type: mechanical, emission class: euro5, Year of construction: 2010, TITLE: IVECO TRAKKER AD340T41 HOOKLIFT, FRONT AND REAR LEAF SPRINGS, 8X4 2+2 REF: 25C42 YEAR: 08/2010 HORSEPOWER: 410 ENGINE SIZE: 12,882 cc EMISSION STANDARD: Euro 5 MILEAGE: 277,000 km TRANSMISSION: manual DIFFERENTIAL LOCK: yes RETARDER/INTARDER: no Duodpfjxzlz Tsx Aiwst AXLES: 4, 8x4 (2+2) WHEELBASE: 5,020 mm TOWING CAPACITY: yes ORIGIN: imported CAB: short and low SEATS: 3 PAYLOAD: 18,730 kg - CHASSIS GVW: 32,000 kg fully loaded / 40,000 kg with construction approval - CHASSIS + TRAILER: 44,000 kg fully loaded / 56,000 kg with construction approval BODY TYPE: hooklift HOOKLIFT MODEL: HYLVA 30.65 TELESCOPIC ARM: yes SWING ARM: no ROLLER: no ADR SPEC: no BODYWORK COMPATIBILITY FROM: 4.90 m + 0.20 m TO: 7.00 m + 0.20 m TOTAL LENGTH: 9.10 m TOTAL LENGTH WITH CONTAINER: 9.40 m ADDITIONAL EQUIPMENT: - crane pre-installation (pipelines) - 2 pistons on the 4th axle - rear clamps RECONDITIONED: no OVERHAULED: yes TYRES: 90% front - 100% rear (new) PRICE: €52,500 + VAT (errors and/or omissions excepted) Displayed prices are excluding VAT. Please contact our sales team for up-to-date prices and terms. For further information: Loris: +39 348 4773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sales and purchase of industrial and commercial vehicles, with a particular specialization in waste sector applications. Specialists in trucks, trailers, and hooklift systems. With a ready stock of over 50 trucks and more than 150 bins and containers, with and without hooklift cranes, available for immediate delivery. E&OE Due to the large number of listings and details provided, Aurora invites all customers to verify the accuracy of the information with our sales staff.

Condition: excellent (used), For sale: horizontal planer/slotting machine from a renowned manufacturer: Ing. Karl Anderle, Steyr (Austria) Robust, heavy-duty industrial machine – ideal for workshop, toolmaking or production. Dujdpfxjy E N Tdj Aiwet 📊 Technical data: Manufacturer: Ing. Karl Anderle Type: 40 Year of manufacture: 1962 Machine number: 948/336 Working speeds: 30 / 60 / 90 / 180 strokes/min ⚡ Motor data: Manufacturer: FFD Wien Type: DU 1.5/2/4 Power: 2 / 1.5 HP Supply voltage: 380 V Current: 3.3 / 2.9 A RPM: 2800 / 1400 rpm Frequency: 50 Hz 2-speed motor ✅ Condition: Used machine Normal signs of use Good technical condition Complete – as shown in the photos 📹 Video of machine operation available (WhatsApp) 🚚 Transport: Possible shipping on a pallet Personal collection Assistance with organizing transport available

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 760 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 152 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 320, spindle speed (max.): 6,000 rpm, spindle motor power: 5,500 W, number of axes: 3, This 3-axis TOS Olomouc FV30 CNC A was manufactured in 2015. It features a spindle speed range of 50-6000 rpm and a tool changer with 12 positions. The machine has a maximum workpiece weight capacity of 360 kg and working strokes of 760 mm in the X-axis, 380 mm in the Y-axis, and 152 mm in the Z-axis. If you are looking to get high-quality machining capabilities, consider the TOS Olomouc FV30 CNC A vertical machining centre we have for sale. Contact us for further details. • Tool changer: 12 positions • Linear measurement: Direct measurement on X and Y axes Duedpfx Aisy E N S Towst • Maximum workpiece weight: 360 kg • Manual console vertical adjustment: 450 mm • Worktable dimensions: Length 1300 mm, Width 305 mm Technical Specification Taper Size ISO 40

Condition: excellent (used), Year of construction: 2001, x travel 1600 mm y travel 1000 mm z travel 780 mm - number of processing axes (excl parallel axes) 5 - X-axis travel 1600 mm - Y-axis travel 1000 mm - Z-axis travel 780 mm - table surface (left-right) 1000 mm - table surface (front-back) 1000 mm - workpiece load (max) 6000 kg - - positioning/indexing 0.001 ° - - positioning/indexing 2.5 ° - - positioning/indexing 2.5 ° - spindle revolutions (max) 2500 /min - drive power 22 kW - number of positions 60 - number of store positions 2 - pallet length 1000 mm - pallet width 1000 mm Djdpfx Asy Ez Elsiweut - number of pallets 2 - space requirements -left/right- 6400 mm - space requirements -front/back- 6900 mm - total height 4000 mm - total weight approx. 26000 kg control HEIDENHAIN TNC 426 The machine is in very good condition and available immediately.

Condition: good (used), Year of construction: 2009, functionality: fully functional, Travel distances Max. grinding diameter: 500 mm Max. grinding length: 2000 mm Max. workpiece weight: 500 kg between centers Duedpfxey Idtqo Aiwet Swiveling of grinding head: +45 / -15° (manual) Grinding wheel: 500/80/203 mm Accessories: - Steady rest - Enclosure A video of the machine under power can be provided upon request.