Used Tos Sus 80 for sale (18,762)

Condition: good (used), Working area Maximum turning diameter 400 mm Maximum turning length 5000 mm Swinging diameter over bed 840 mm Swinging diameter over carriage 530 mm Spindle speed 14.6 – 1250 rpm Drive power 18.5 kW Dimensions 8.0 × 1.9 × 1.7 m Dodpfx Ajy Ug U Dsl Ajku Weight approx. 6.3 – 8.2 t

Condition: used, Year of construction: 1971, For sale is a TOS WH 80 drilling machine, manufactured in 1971, in working condition. The machine is equipped with a retrofitted digital display and has an MK5 spindle. Equipment / Condition: * TOS WH 80 * Year of manufacture: 1971 * Functional * Retrofitted digital display * MK5 spindle * Large clamping table with T-slots * A large amount of additional equipment and accessories is available * Maintenance / Repairs: In 2024, the gearbox was opened and overhauled. Various gears were renewed or replaced during this process. The machine can be inspected on-site and, by arrangement, demonstrated. Due to its size and weight, the buyer is responsible for organizing the collection or transport. Dedpfszwv Dkex Al Aoku Further photos and information on the available additional equipment are available upon request. VAT can be shown separately.

Condition: used, functionality: fully functional, spindle bore: 82 mm, turning diameter: 630 mm, turning length: 1,250 mm, total length: 3,420 mm, total width: 1,750 mm, total height: 1,400 mm, type of input current: three-phase, overall weight: 5,200 kg, workpiece weight (max.): 6,000 kg, spindle mount: MK 6, Hello, We are offering a robust, well-maintained SUS 63/1250 lathe. All components are original, and it is in 100% working condition. Djdpozxn R Esfx Al Aoku The lathe was used sporadically in our workshop. It is in continuous operation, connected, and can be inspected. Manufacturer: TOS Turning length: 1250 mm Turning diameter (max.): 655 mm Turning diameter on the cross slide (max.): 390 mm Taper: Morse 6 Weight: 5.2 t Main motor: 22 kW (option to install a lower-power motor) Length/width/height: 3420/1750/1400 mm Load capacity: 6 t Spindle bore: 82 mm Rapid feeds Included: - 400 mm self-centering chuck - additional set of jaws - rotary steady rest - set of wrenches - chip/coolant tray - coolant pump - lamp - Technical documentation in Polish + mechanical and electrical diagrams We recently replaced the hydraulic oil with new oil.

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 15 m/min, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, position of the milling head: osa A 105°+ osa B 90°, spindle speed (max.): 3,500 rpm, spindle speed (min.): 3,500 rpm, table width: 800 mm, table load: 8,500 kg, table length: 3,000 mm, table height: 1,000 mm, total height: 3,400 mm, total width: 4,360 mm, total length: 7,760 mm, type of input current: three-phase, rotational speed (max.): 3,500 rpm, workpiece weight (max.): 8,500 kg, overall weight: 18,000 kg, year of last overhaul: 2025, spindle motor power: 22,000 W, power: 22 kW (29.91 HP), Equipment: rotational speed infinitely variable, FSQ 80(100) S/A3 CNC - TOS KUŘIM Bed Milling Machine, Table Length 3m Control System: Heidenhain 415F Complete Mechanical Overhaul: 2024 Availability: IMMEDIATE DELIVERY Warranty: 6 months FSQ 80(100) O/A3 CNC – Technical Specifications: Basic machine data: Manufacturer: TOS Kuřim Overall length: 7,760 mm Overall width: 4,360 mm Overall height: 3,400 mm Total weight: 18,000 kg Total power consumption: 40 kVA Working range: Longitudinal travel X-axis: 3,000 mm Cross travel Y-axis: 1,000 mm Vertical travel Z-axis: 900 mm Spindle head (S Head): Dkjdpfoxp Dkcjx Al Aeu Max. power: 22 kW Speed range: 16 – 3,500 rpm Number of speed ranges: stepless Spindle rotation around A-axis: 105° Spindle rotation around B-axis: 90° Feed range X – Y / Z: Number of speed ranges / range: stepless / 1 – 5,000 mm/min Rapid traverse Y – Z / X: 10,000 / 15,000 mm/min Table: Table area: 800 x 3,000 mm Max. load: 8,500 kg Control System: Heidenhain 415F Further details on request.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Control system: Siemens 840-D Spindle diameter: 130 mm Spindle speed: 3500 RPM Spindle mount: ISO 50 Torque: 1320 Nm Main motor power: 37 kW Travel in X-axis: 4000 mm Travel in Y-axis: 2500 mm Dkedpfx Ajz Ii Tdjl Asu Travel in Z-axis: 2000 mm Travel in W-axis: 800 mm Working feed rates: 15 m/min Rapid traverse rates: 20 m/min Rotary table: 1800 x 1800 mm Table load capacity: 20,000 kg Tool magazine: 60 positions Machine weight: approx. 36 tons Universal milling head - manual

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, feed length X-axis: 2,000 mm, feed length Y-axis: 900 mm, feed length Z-axis: 800 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, total height: 3,130 mm, total width: 3,680 mm, total length: 5,350 mm, table width: 800 mm, table length: 2,000 mm, table height: 500 mm, position of the milling head: souvisle řízená ve 2 osách, type of input current: three-phase, rotational speed (max.): 4,000 rpm, rotational speed (min.): 20 rpm, table load: 3,000 kg, overall weight: 9,000 kg, workpiece weight (max.): 3,000 kg, Equipment: rotational speed infinitely variable, FSGQ 80 SM/A2 CNC - TOS KUŘIM Bed-Type Milling Machine, Table Length 2m Control System: Heidenhain TNC 530 Availability: In stock FSGQ 80 SM/A2 CNC – Technical Specifications: Basic Machine Data: Manufacturer: TOS Kuřim Overall length: 5,350 mm Overall width: 3,680 mm Overall height: 3,130 mm Total weight: 9,000 kg Total power requirement: 35 kVA Dkodpjxp Iyujfx Al Asu Working Range: Longitudinal travel, X axis: 2,000 mm Transverse travel, Y axis: 900 mm Vertical travel, Z axis: 800 mm Spindle Head (Head S): Spindle taper: HSK-A 63 Max. power: 19.3 kW Speed range: 20 – 4,000 rpm Number of speed stages: stepless Machining: stepless in 2 axes Feed Range X – Y / Z: Number of stages / range: stepless / 5 – 20,000 mm.min-1 Table: Table size: 800 x 2,000 mm Max. table load: 3,000 kg Tool Changer: Number of tools: 24 Low-pressure tool cooling: 4 bar High-pressure cooling: 20 bar Control system: Heidenhain TNC 530 Further details upon request.

Condition: ready for operation (used), functionality: fully functional, turning diameter over bed slide: 630 mm, center height: 315 mm, center width: 3,000 mm, spindle speed (max.): 1,120 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum turning height: 315 mm Turning diameter over bed: 630 mm Turning diameter over slide: 400 mm Distance between centers: 3,000 mm Bed width: 580 mm Spindle bore: 82 mm Spindle speed: 9–1,120 rpm MACHINE DETAILS Control system: Conventional Power: 18.5 kW DIMENSIONS & WEIGHT Dimensions (L x W x H): 4,500 x 1,600 x 1,500 mm Dkodpjz Ebcrofx Al Aeu Net weight: 5,000 kg Shipping packages: 1 unit

Condition: used, functionality: fully functional, Manufacturer: TOS Type: H 80 Spindle diameter: 80 mm Spindle travel: 700 mm Spindle taper: Morse taper 5 (MT5) Table size: 1100 x 890 mm / 1120 x 900 mm Dkjdpfxjzwmrfj Al Aju (X / Y / Z): 1000 mm, 1000 mm, travel: 1100 mm

Condition: good (used), Year of construction: 1994, functionality: fully functional, planing width: 800 mm, overall weight: 1,600 kg, height adjustment type: electric, number of planer blades: 4, planing height: 200 mm, Equipment: motor brake, Year of manufacture: 1994 Planing width: 800 mm Maximum planing height: 200 mm Number of knives: 4 Minimum workpiece length: 500 mm Minimum planing height: 5 mm Speed: 4,500 rpm Table length: 1,100 mm Dodpfx Aljwma N Sj Ajku Number of feed rollers: 1 Main motor: 11 kW Maximum feed: 32 m/min Infinitely variable feed: Yes Table rollers: Yes Digital thickness display: Yes Sectional pressure roller: Yes Electric height adjustment: Yes Cutter shaft: Centrifugal shaft Centrifugal shaft: Tersa Outfeed: Steel roller Total power: 16 kW Approx. weight: 1,600 kg Space required (length): 1.2 m Space required (width): 1.65 m Space required (height) : 1.8 m

Condition: used, TOS P23 four-sided planer – 250 x 180mm Manufacturer: TOS SVITAVY Model: P23 Max. height: 180mm Max. width: 250mm Adjustable feed rate: 5-40 m/min 8 cutterblocks 2 x bottom 2 x right Djdpfsz Niiiox Al Asku 2 x left 2 x top Pneumatic roller pressure Robust planer

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, space requirement width: 1,975 mm, space requirement length: 1,800 mm, space requirement height: 1,900 mm, Equipment: documentation/manual, Machine is in very good condition - used as a training machine until 2018; since then, the machine has hardly been in operation. Dksdpfxow U Aaho Al Aeu Operating voltage 400 V Spindle mount ISO 40 Quill stroke 100 mm Spindle speeds 63 – 3150 rpm Fixed table

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 1,740 mm, total width: 1,740 mm, total length: 2,090 mm, overall weight: 1,725 kg, Equipment: documentation/manual, The machine is in very good condition – it was used as a training machine until 2018; since then, it has rarely been in operation. Operating voltage: 380 V. Spindle mount: ISO 40. Quill stroke: 100 mm. Spindle speeds: 40 - 2000 rpm. Rotary table. Dedpfx Aljw Uriro Asku

Condition: used, Year of construction: 1979, total height: 1,700 mm, total length: 4,900 mm, total width: 1,900 mm, Empty weight: 8.000 kg Metal turning lathe Djdpfx Alewnhf Rj Aeku Model: Conventional Manufacturer: TOS Type: SU-100 Centerdistance: 2000mm Turningdiameter above bed: 1050mm Spindle-hole: 105mm Motorpower: 22kW Spindle-speed: 2,24-450rpm Max. workpiece weight: 5000kg Including 4-jaw-chuck + lynette Machine-dimensions: 4900x1900x1700mm Machine-weight: 8000kg Machine has been tested, in very good condition Video is available - Year: 1979 - Serial number: 0429412 - Drive system: Conventional - Power [kW]: 22.0 - Swing over bed [mm]: 1050 - Distance between centres [mm]: 2000 - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 2.24 - Max. spindle speed [rpm]: 450 - Options: Four-jaw chuck, Fixed steady - Transport dimensions: 4900mm x 1900mm x 1700mm (l x w x h) - Transport weight [kg]: 8000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Fixed setting vice with roller quills for SUI 80 TRENCIN Capacity : 210 - 370 mm 365 - 520 mm Dedpfsu Tvdbjx Al Aeku Only available as a set

Condition: used, Year of construction: 1991, total length: 10,730 mm, total width: 1,600 mm, total height: 2,400 mm, Colour: Green Empty weight: 12.000 kg Price: On request - Year: 1991 - Documentation available: No - CE certificate present: No - Serial number: 0443848 - Drive system: Conventional - Power [kW]: 30.0 - Centre height [mm]: 625 - Swing over bed [mm]: 1250 - Carriage turning diameter [mm]: 1100 - Distance between centres [mm]: 8000 - Bed width [mm]: 800 - Spindle bore [mm]: 110 - Min. spindle speed [rpm]: 1.8 - Max. spindle speed [rpm]: 355 - Options: Three-jaw chuck, Four-jaw chuck, Fixed steady - Transport dimensions: 10730mm x 1600mm x 2400mm (l x w x h) - Transport weight [kg]: 12000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Dkodpfx Alsy E Imvj Aeu

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, TRACKED SINGLE-SHAFT MULTIBLADE SAWMILL TOS SVITAVY PWR 401 450/160, 75 kW MOTOR Note: Fitted with new guides and a new chain (the replacement cost was quite significant – 36,000 PLN) TECHNICAL DATA - Track width: 450 mm - Shaft width: 420 mm - Mounted blade: 400 mm - Maximum blade diameter: 450 mm - Blade bore diameter: 80 mm - Maximum cutting height with 450 mm blade: 160 mm - Table dimensions: 2230 x 860 mm Top side: - Anti-kickback pawls - Slipper shaft - Anti-kickback pawls - Smooth slip roller - Hold-down - Shaft with bushing and nut - Hold-down - 2 slip/hold-down shafts Bottom side: - Roller before the table - Guide rail - Pawls Dksdpoy Nxdysfx Al Asu - Track chain - Central track chain lubrication - Electric rise and fall for sawshaft - Electric body lift: 0.75 kW - Infinitely variable feed speed – new 2.2 kW inverter installed - Extraction port diameter: 280 mm - Main motor: 75 kW - Overall dimensions (L/W/H): 2360 x 2000 x 1960 mm - Weight: 3250 kg ADVANTAGES - Czech manufacture - Used multiblade saw - Overhead operator’s control panel - Full technical documentation (DTR) - Very good condition - We can provide a warranty for the equipment

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 985 mm, travel distance Z-axis: 900 mm, table load: 2,500 kg, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, total height: 3,885 mm, total length: 4,490 mm, total width: 5,700 mm, table length: 800 mm, table width: 800 mm, feed rate X-axis: 4 m/min, feed rate Y-axis: 4 m/min, feed rate Z-axis: 4 m/min, rapid traverse X-axis: 8 m/min, rapid traverse Y-axis: 8 m/min, rapid traverse Z-axis: 8 m/min, Technical machine data: Manufacturer: TOS Kuřim Overall length: 4,490 mm Overall width: 5,700 mm Overall height: 3,885 mm Total weight: 21,000 kg Total power consumption: 65 kVA Longitudinal travel X-axis: 1,250 mm Transversal travel Y-axis: 985 mm Vertical travel Z-axis: 900 mm Workholding base positioning (pallet): 360° x 1 Spindle taper: ISO 50 Working spindle (number of speeds / speed range): stepless / 10–5,000 rpm Spindle motor power: 22.5 kW Max. spindle torque: 1,000 Nm Feed range X–Y/Z (number of steps / range): stepless / 1–4,000 mm/min Rapid traverse X–Y/Z: 8,000 mm / min Number of pallets: 2 pcs Dodpexxxg Dofx Al Asku Pallet dimensions (width x length): 800 x 800 mm Max. pallet load: 2,500 kg Tool changer – number of tools: 50 pcs

Year of construction: 1980, condition: used, turning diameter over bed 655 mm turning diameter over slide rest 390 mm turning length 1250 mm spindle bore 82 mm Dkedpfxjlc Uk Ij Al Asu spindle turning speed range 9-1120 U/min feeds 0,049-3 mm/U total power requirement 12 kW weight of the machine ca. 5,2 t required space 3,5 x 1,9 x 1,7 m m

Condition: excellent (used), Year of construction: 2005, spindle diameter: 128 mm, spindle speed (max.): 5,000 rpm, table length: 850 mm, table width: 850 mm, feed length X-axis: 1,600 mm, feed length Y-axis: 920 mm, feed length Z-axis: 950 mm, workpiece weight (max.): 5,000 kg, WFQ80NCA-CNC/50, OVERHAUL 2005 ■ T-TYPE HORIZONTAL BORING MILL ■ PRODUCER: TOS VARNSDORF ■ PRODUCTION YEAR: 1990 ■ MODERNISATION AND OVERHAUL YEAR: 2005 (RETOS) ■ REPAIR YEAR: 2024 (RETOS) ■ CONDITION: USED, VERY GOOD ■ WARRANTY: YES ■ IN STOCK AT THE SUPPLIER SPECIFICATION ■ HEIDENHAIN iTNC530 control system + handwheel ■ SIEMENS motors and drives ■ CNC table - full B axis controll ■ CHOV-K 10bar - cooling through spindle axis – emulsion ■ ATC40 - automatic tool changer ■ operator housing against swarf and water ■ workpiece cover SCOPE OF REPAIR 2024 Dedpferr Sk Hex Al Aeku ■ Cleaning ■ Revision and machine geometry adjustment ■ Revision of machine functionality ■ Revision of electrical equipment ■ Revision of hydraulic and lubrication ■ Clearance adjustment and drive optimisation ■ Replacing of guideway wipers ■ Repair of machine telescopic covers ■ Revision of tool cooling CHOV-K 10bar ■ Revision of automatic tool changer ATC40

Condition: used, We offer for sale a reliable multi-blade single-shaft rip saw TOS Svitavy PWR 421, designed for efficient longitudinal cutting of wooden boards, slats, and timber elements. The machine is suitable for both softwood and hardwood processing and enables high productivity through the use of multiple saw blades. Key Features & Benefits Heavy-duty multi-blade rip saw Suitable for mass production cutting Processes both softwood and hardwood High accuracy and stable cutting performance Adjustable feed speed Designed for continuous industrial operation Technical Specifications Cutting System Saw blade diameter: 250 – 450 mm Max. blade diameter: 450 mm Multiple blade configuration possible Material Capacity Min. material thickness: approx. 12 mm (14 mm depending on setup) Passage height depending on blade diameter: Ø450 mm: approx. 150–160 mm Ø400 mm: approx. 125–135 mm Ø350 mm: approx. 100–110 mm Ø300 mm: approx. 70–80 mm Ø250 mm: approx. 50–60 mm Minimum workpiece length: approx. 750 mm With additional roller (for lower cutting heights): min. approx. 500 mm Working Range Max. right-side cutting width: approx. 405 mm Left-side range: approx. 465 mm Total working width: approx. 870 mm Speed & Performance Spindle speed depending on blade diameter: Ø450 mm: approx. 3,300 rpm Ø400 / 350 mm: approx. 3,800 rpm Ø300 mm: approx. 4,450 rpm Ø250 mm: approx. 5,500 rpm Feed speed: approx. 4 – 40 m/min (adjustable) Drive & Power Main motor power: approx. 45 – 55 kW Feed conveyor motor: approx. 3.5 kW Additional motors: Pressure beam lifting: 0.55 kW Saw spindle lifting: 0.55 kW Blade adjustment: 0.18 kW Machine Construction Feed conveyor width: approx. 450 mm Working height: approx. 850 mm Solid industrial frame for vibration-free operation Djdpfxszgtlde Al Aoku Operating Conditions Operating temperature: +5 °C to +40 °C Suitable for workshop environment Condition & Sale Terms Condition: Good working condition Reliable and proven industrial machine Dismantling and transport to be arranged by the buyer Advantages High productivity in longitudinal cutting Flexible configuration with multiple blades Suitable for a wide range of materials Durable and robust TOS Svitavy construction

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 950 mm, spindle diameter: 128 mm, controller model: HEIDENHAIN iTNC530, The machine was overhauled and modernized in 2005. Repairs were carried out in 2025. The following work was performed: Dkodsy Edl Uepfx Al Aou - Cleaning of the machine - Overhaul and adjustment of machine geometry - Overhaul of machine functionality - Overhaul of electrical equipment - Overhaul of hydraulics and lubrication - Backlash compensation and drive optimization - Replacement of guideway wipers - Repair of the telescopic cover - Overhaul of the CHOV-K 10 bar tool cooling system - Overhaul of the AVN40 tool changer TECHNICAL DETAILS Main spindle diameter: 128.57 mm Tool holder: ISO 50 Spindle speed range: 5,000 rpm Travel X-axis: 1,600 mm Travel Y-axis: 920 mm Travel Z-axis: 950 mm Clamping surface of table: 850 x 850 mm (850 x 1,600 mm including additional supports) Table load capacity: 3,000 kg MACHINE DETAILS Control: HEIDENHAIN iTNC530 EQUIPMENT - Handwheel - SIEMENS motors and drives - CNC table - full B-axis control - CHOV-K 10 bar - through-spindle cooling – emulsion - ATC40 - automatic tool changer - Operator console protected against chips and coolant - Workpiece cover

Condition: like new (used), Year of construction: 2024, functionality: fully functional, grinding length: 1,650 mm, grinding diameter: 400 mm, We offer a new BUB40 x 1500 NC machine equipped with a MITSHUBISHI NC controller. The machine is still under lease with ING Lease. It has been thoroughly refurbished based on the TOS HOSTIVAR BUB 40 model by FAS GŁOWNO. Technical data: • Maximum workpiece diameter: 400mm • Maximum workpiece length: 1500mm • Centre height: 200mm • Distance between centres: 1500mm • Minimum grindable workpiece diameter with a 380 mm grinding wheel: 20mm • Tailstock quill stroke: 40mm • Maximum tailstock clamping force: 4000N • Spindle headstock centre taper: ISO 296-1991/Morse 5 • Tailstock centre taper: ISO 296-1991/Morse 5 • Maximum workpiece weight between centres: 500kg • Maximum workpiece weight in chuck (including chuck): 100kg • Machine width (with enclosure): 6650mm • Machine depth (with enclosure, without control panel): 2400mm • Machine height (with enclosure): 1850mm • Machine weight: 7000kg • Total power requirement: 38kVA Grinding spindle: Dkodpfx Alowzkywo Aju • Standard grinding wheel dimensions: 500 x 80 x 203.2mm • Grinding spindle drive motor power: 11kW • Grinding spindle rated speeds (for 430 mm / for >430 mm and 500 mm wheels): 2000 / 1744 rpm • Grinding headstock traverse servo motor power: 2kW • Grinding headstock traverse servo motor torque: 9.5Nm • Maximum continuous X-axis traverse speed: 2m/min • Minimum X-axis grinding wheel increment: 0.001mm • Maximum continuous X-axis traverse speed: 6m/min • Minimum X-axis grinding wheel increment: 0.001mm • Maximum grinding wheel increment in INC mode: 0.1 mm • Table traverse servo motor power: 3.5 kW • Table traverse servo motor torque: 16.7 Nm Workpiece spindle: • Workpiece spindle speed range: 1 – 150 rpm • Workpiece spindle servo motor power: 3.5kW • Workpiece spindle servo motor torque: 16.7Nm More information available upon request via email or phone.

Condition: used, Year of construction: 2010, Faceplate LD 650 for TOS WHQ 13 For sale: a used faceplate LD 650, manufactured in 2010, suitable for TOS WHQ 13. Dsdpfjz I Dvmsx Al Ajku Suitable for facing, turning, and machining large diameters. Slide stroke: 170 mm, maximum machining diameter: approx. 1,000 mm. The faceplate is intended for use on a TOS WHQ 13. Technical data: Type: LD 650 Diameter: 650 mm Slide stroke: 170 mm Machining diameter: 300 - 1,000 mm Speed: up to 150 rpm including turning tool holder Price: 9,100.00 Euro net (new price: 21,500.00 €)

Condition: used, total height: 1,700 mm, total length: 6,000 mm, total width: 1,700 mm, Empty weight: 6.500 kg Price: On request Lathe metal lathe Model: Conventional Manufacturer: TOS Type: SUI 63 Serial number: 407620860 Center distance: 4000mm Center height: 325mm Turning diameter: 630mm Spindle passage: 80mm Spindle speed: 11,2-1800 rpm Machine-afmeting: 6000x1700x1700mm Machine weight: 6500kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 325 - Swing over bed [mm]: 630 - Distance between centres [mm]: 4000 - Spindle bore [mm]: 80 - Min. spindle speed [rpm]: 11.2 - Max. spindle speed [rpm]: 1800 - Transport dimensions: 6000mm x 1700mm x 1700mm (l x w x h) - Transport weight [kg]: 6500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dkedswnhy Iopfx Al Aeu Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,250 mm, spindle diameter: 130 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 2,500 rpm, table length: 2,200 mm, table width: 1,800 mm, TOS Varnsdorf WHQ 13.8 CNC table type horizontal boring mill, year of construction 2000, made in the Czech Republic. The machine is controlled by an original Heidenhain TNC 430 CNC with the Heidenhain operating panel and runs programs produced with CAM software. The control cabinet air conditioning unit was replaced one year ago. The machine is well maintained and in full working order. Technical data: - Control: Heidenhain TNC 430 - Spindle diameter: 130 mm - Spindle speed: 10 - 2,500 rpm - Tool taper: ISO SK 50 - X travel: 3,500 mm - Y travel (vertical axis): 2,500 mm Dksdez Ap Awepfx Al Aeu - Z travel: 1,250 mm - Table size: 2,200 x 1,800 mm - Operator platform with 250 kg load capacity - Air conditioning unit fitted one year ago - Programmable via CAM software The machine can be inspected under power in our workshop.