Used Tos Fn 32 for sale (8,977)

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 1,740 mm, total width: 1,740 mm, total length: 2,090 mm, overall weight: 1,725 kg, Equipment: documentation/manual, The machine is in very good condition – it was used as a training machine until 2018; since then, it has rarely been in operation. Operating voltage: 380 V. Spindle mount: ISO 40. Quill stroke: 100 mm. Spindle speeds: 40 - 2000 rpm. Rotary table. Chjdpfsw Urirox Agrod

Condition: used, Univ. Universal milling machine TOS, type FN 32 Year of manufacture: approx. 1980 Travel distances: X: 450 mm, Y: 240 mm, Z: 380 mm Table size: 700 x 300 mm Spindle mount: SK 40 - M16 Spindle speed: 63-2000 rpm, 18 steps Feed rate: 8-400 mm/min, 18 steps Rapid traverse rate: approx. 1400 mm/min Tailstock travel: 90 mm Main spindle motor power: 2.2 kW Connection power: 400 Volt, 50 Hz - 2-axis digital display Heidenhain, type 731B for the X and Y axes - Vertical milling head with boring quill, swiveling +/- 90° and horizontally extendable - Spindle speed via 18 gear stages - Coolant system in the machine base - Electrical control cabinet on the side of the machine - Fixed angle table - Support for horizontal milling - Keyway broaching attachment, 16 to 105 strokes, stroke up to 70 mm, swiveling +/- 90° - 1 piece tool holder SK 40 with slitting cutter Chedpfx Agjz Ebu Uered - Control cabinet located beside the machine Space requirement L x W x H: 1500 x 1200 x 1970 mm Weight: 1650 kg Good condition

Condition: ready for operation (used), TOS milling machine FN 32, spindle taper SK 40, speed range 40–2000 rpm Chjdpfx Agoyf Efhjrsd

Year of construction: 1998, condition: new, New trapezoidal screw and nut for the X-axis, for FN20, FN32, FN40. Chedpfx Agek Nk Iwsred

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, space requirement width: 1,975 mm, space requirement length: 1,800 mm, space requirement height: 1,900 mm, Equipment: documentation/manual, Machine is in very good condition - used as a training machine until 2018; since then, the machine has hardly been in operation. Operating voltage 400 V Spindle mount ISO 40 Quill stroke 100 mm Spindle speeds 63 – 3150 rpm Chodpfxew U Aahe Agrsd Fixed table

Year of construction: 1992, condition: new, New ISO40 collet for FN 20/32/40 milling machines. Codpjk Nk I Njfx Agrehd

Condition: good (used), Year of construction: 1980, TOS FNGJ 32 Milling Machine Year of manufacture: 1980 Equipped with Heidenhain TNC 135 control With accessories Table size: 800x400 mm Spindle speeds: 40–2000 rpm Longitudinal and cross feeds: 8–400 mm/min Vertical feeds: 4–200 mm/min Distance from horizontal spindle axis to table surface: 125–525 mm Distance from vertical head spindle axis to table surface: 58–458 mm X-axis travel: 600 mm Y-axis travel: 400 mm Csdpfxox U Eb Ao Agrehd Z-axis travel: 400 mm

Year of construction: 2000, condition: repair required (used), functionality: not functional, Spare parts, service, and repairs for tool milling machines from the production of TOS, later INTOS Zebrak of the series FN 20/32/40, FNGJ 20/30/32/40/50, FNGP 40/50 Cjdpfx Agexg H Hhorohd

Condition: good (used), functionality: fully functional, Machine weight: 1725 kg Total machine power: 3 kW Table clamping surface: 800x400 mm Longitudinal table movement - x-axis: 600 mm Transverse table movement - z-axis: 400 mm Vertical table movement - y-axis: 400 mm Spindle taper: ISO 40 Spindle speed: 40-2000 rpm Chodpfx Aevzkzcsgrjd Working longitudinal feed - x-axis: 8-400 mm/min Working transverse feed - z-axis: 8-400 mm/min Working vertical feed - y-axis: 8-400 mm/min Rapid feed x/z/y: 2000/2000/1000 mm/min Max. workpiece weight: 400 kg

Year of construction: 1983, condition: good (used), FGSV 32 TOS KURIM milling machine. Year of manufacture 1983 (CZE). Parameters: Table 320 x 1400 mm. Travels: X - 1000 mm, Y - 400 mm, Z - 450 mm. ISO 50. Speed ​​range 35-1800 rpm. Distance between spindle and table 140 - 590 mm. Distance between spindle and column 120 - 520 mm. Max. table load 500 kg. Main engine power 11 kW. The demand for a power of 15 kW. Dimensions: Length X Width X Height: 2735 X 2425 X 2475 mm. Weight 4200 kg. Chedpfxjh Ir Rmo Agrsd

Condition: new, New bellows (guide rail covers) for tool milling machines from the TOS/INTOS Zebrak production line. Please specify the exact machine type when making inquiries. Other spare parts are also available. Chedpedx Rfvjfx Agred

Condition: good (used), TOS fnk 25 – milling machine Table dimensions: 1250 × 290 mm, 800 mm X-axis travel 370 mm Y-axis travel 450 mm Z-axis travel Automatic feed on the drill quill, 3 settings: 0.035 / 0.070 / 0.140 Automatic feed and rapid traverse on the X and Y axes Electric traverse (rapid traverse) on the Z-axis Cjds Ahfd Sspfx Agrehd Spindle ISO 40 with a speed of 56–4500 rpm, Table load capacity up to 200–500 kg, Machine dimensions: 1.90 m (length) × 1.70 m (depth) × approx. 2.3 m (height) Machine weight: approx. 1.7 tons. Year of manufacture: 1986

Condition: reconditioned (used), TOS FN 20 tool milling machine, geometrically overhauled in 2026. Universal tool milling machine, TOS Chedpfxez Sqq Ho Agrod Type/Model: TOS FN20 Condition: Used Geometrically overhauled in 2026, geometric protocol available Year of manufacture: approx. 1990s The machine was completely disassembled, thoroughly cleaned, geometrically overhauled, and repainted. Subsequently, it was professionally reassembled, and a comprehensive functional test was performed. The machine geometry was checked and adjusted. A test protocol according to DIN 8615 is available. As part of the work, the gib strips were also adjusted, and the coolant pump was overhauled. Technical data: Travel ranges (X/Y/Z): 300 mm / 200 mm / 350 mm Clamping surface (rotary table): approx. 240 x 600 mm Spindle mount: SK 40 (ISO 40) Speed range: 50 - 2,000 1/min (18 steps) Feeds: 8 - 400 mm/min (18 steps) Rapid traverse: approx. 1340 mm/min Power of main motor: approx. 3.5 kW Machine weight: approx. 1,000 kg Equipment including: - new 3-axis digital display - new bellow Inquiry item: Transportation costs will be provided in a separate quote.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Control system: Siemens 840-D Spindle diameter: 130 mm Spindle speed: 3500 RPM Spindle mount: ISO 50 Torque: 1320 Nm Main motor power: 37 kW Travel in X-axis: 4000 mm Travel in Y-axis: 2500 mm Travel in Z-axis: 2000 mm Travel in W-axis: 800 mm Working feed rates: 15 m/min Rapid traverse rates: 20 m/min Rotary table: 1800 x 1800 mm Table load capacity: 20,000 kg Tool magazine: 60 positions Machine weight: approx. 36 tons Universal milling head - manual Codpfxoz Ii Tds Agrshd

Condition: good (used), functionality: fully functional, Table dimensions 1250 × 290 mm, 800 mm X travel 370 mm Y travel 450 mm Z travel automatic feed on drilling quill, 3 settings: 0.035 / 0.070 / 0.140 automatic feed and rapid traverse on X and Y axes Chjdpfx Aezi Hihogrsd electric rapid traverse on Z axis Spindle ISO 40 with speed range 56–4500 rpm, table load capacity up to 200–500 kg, Machine dimensions: 1.90 m (length) × 1.70 m (depth) × approx. 2.3 m (height) machine weight approx. 1.7 tons. year of manufacture: 1986 Please note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or a contract and we recommend you verify all relevant details. Financial information VAT/margin: VAT: The price shown is exclusive of VAT (VAT deductible for businesses).

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 140569, Table: 600 x 300 mm Chsdpfx Agozvqnnerjd Travel ranges X / Y / Z: 400 / 300 / 350 mm Spindle mount: SK 40 Spindle speeds: 50 - 2500 rpm Drive power: 2.2 kW Accessories: Vise, dividing head, rotatable vertical milling head, HEIDENHAIN for X Y Z Weight: 1,500 kg Machine dimensions: L 1485 x W 1475 x H 1680 mm Operating manual in German

Condition: good (used), functionality: fully functional, TOS FNG40 CNC milling machine with Heidenhain 407 CNC control. Spindle speed: 10-3150 rpm Feed rate x, y, z: 3000 max. Chjdpfx Agjzhia Tjrjd Rapid traverse rate x, y, z: 9000 max. Work area: X 500mm, Y 400mm, Z 400mm Tool holder: ISO40 Hydraulic tool clamping Work table dimensions: 700mm x 400mm Shipping data: Weight: 2600 kg Dimensions (length x width x height): 2.40 x 2.40 x 2.00m

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, grinding length: 630 mm, grinding diameter: 320 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. grinding length: 630 mm Max. grinding diameter: 320 mm MACHINE DETAILS Chodpfx Agjyvf S Norjd Manufacturer: TOS HOSTIVAR Model: BHU 32 Year of manufacture: 1987

Condition: excellent (used), Year of construction: 1996, turning diameter 380 mm turning length 750 mm control HEIDENHAIN ManualPlus total power requirement 9 kW Chodpfxsx U Ence Agred weight of the machine ca. 2 t dimensions of the machine ca. 2,4 x 1,7 x 1,7 m

Year of construction: 1994, condition: used, functionality: fully functional, Lathe, including chip tray and emulsion tank with pump, machine accessories: 315 mm chuck, rotating center for tailstock, technical documentation, technical parameters: distance between centers 2000 mm, swing over bed 500 mm, swing over carriage 250 mm, spindle bore 56 mm, maximum workpiece weight 1100 kg, spindle taper M 60, 1:20, tailstock center taper MORSE 5, spindle speed range 11.2-1400 rpm, power 2 x 5.5 kW, machine dimensions (wxd) 1180 x 4420 mm, weight 3260 kg, the machine can be tested by arrangement. Chjdpe Ah S Auofx Agred

Condition: used, TOS P23 four-sided planer – 250 x 180mm Manufacturer: TOS SVITAVY Model: P23 Max. height: 180mm Max. width: 250mm Adjustable feed rate: 5-40 m/min Chsdpsz Niiiofx Agred 8 cutterblocks 2 x bottom 2 x right 2 x left 2 x top Pneumatic roller pressure Robust planer

Condition: good (used), Year of construction: 1996, functionality: unexamined, travel distance X-axis: 1,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 36 rpm, table width: 400 mm, table length: 1,400 mm, overall weight: 4,980 kg, input frequency: 50 Hz, Brand: TOS - Huvema Model: FGS32/40t Year of manufacture: 1996 Serial number: 23700080 Capacity (kW): 11 Voltage: 3x 380 V Frequency (Hz): 50 RPM: 35.5 - 1800 Chsdpoydk E Rsfx Agrjd Dimensions (LxWxH, mm): 2300 x 2300 x 2700 Weight (kg) approx.: 4980 Stock quantity: 1 Manufactured in: Czech Republic Table dimensions (mm): 1400 x 400 Digital display brand & model: Ditron D60-3V X-Y-Z Comments: Optical condition good Longitudinal travel (mm): 1000 Cross travel (mm): 400 Vertical travel (mm): 450 Terms of sale: Sold as is.

Condition: used, Year of construction: 1969, Drill press, bench drill, column drill, pillar drill -Manufacturer: TOS, high-performance column drilling machine type 40 TF / C -Motor: MEZ 2.2 kW -Speeds: 56 - 2240 rpm -Table size: 400 x 315 mm, travel 600 mm -spindle taper: MK4 -Spindle stroke: 165 mm Chedpfxohck U Is Agrjd -Projection: 290 mm -Pillar Ø: 140 mm -Dimensions: 1200/650 / H1990 mm -Weight: 602 kg

Condition: new, We sell spare parts for the following milling machines: FN20, FNGJ20/30, FNGJ32, FNGJ40, FNGJ50, FNGP, FNG CNC FB3, FB4, FB5, FB6 as well as for lathes S32. Chedpfxsufgb Is Agrod

Condition: excellent (used), feed length X-axis: 450 mm, feed length Y-axis: 300 mm, feed length Z-axis: 300 mm, CNC TOS INTOS ZEBRAK FNG30 milling machine TNC310 Heidenhain control X450mm Csdpfx Aorq D Uksgrshd Y300mm Z300mm tool clamping hydraulic inverter on spindle SK40 machine in very good condition