Used Toolroom Milling Machine for sale (64,587)

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Milling Machining Center - Vertical / Brand: DECKEL MAHO / Type: DMC 63V / Year of construction: 1999 The machine can be inspected by appointment under power. Well-maintained and very good functional condition. Spindle replacement: 18.03.2022 Spindle hours (03/13/2025): 51.206 h The machine has a Lehmann A-axis and counter bearing (as new). TECHNICAL DATA: Working area: - X-axis: 630 mm - Y-axis: 500 mm - Z-axis: 500 mm Feed/axis drives: - Advancing force X, Y, Z (100 % ED): 6.000 N - Feed rate: 0 - 30.000 mm/min - Rapid feed X, Y, Z: 30 m/min - Diameter ball screw/pitch (X, Y, Z): 40/20 mm Positioning accuracy: - Pmax in X, Y, Z-axis to VDI/DGQ 3441: 0,015/0,010 mm (indirect/direct measuring system) Distance measuring system: - Input unit: 0,001 mm Working spindle: - Drive power (40/100 % ED): 13/9 kW - Torque (40/100 % ED): 83/57 Nm - Speed range: 1 - 10.000 rpm - Tool holder DIN 69 871-A: SK40 - Tool clamping force: 12.000 N Tool magazine: - Tool changing system: Pick-up - Number of magazine positions: 24 - max. Tool-Ø with vacant neighboring spaces: 80/140 mm - max. Tool length: 300 mm - max. Tool weight: 7 kg - Chip-to-chip time: 6,5 sec - Rotational speed/tool magazine: 47 rpm - max. Maximum loading weight of the tool magazine (24 x 3 kg): 72 kg Machine/Working table: - Clamping surface with T-slots DIN 650-14: 800 x 500 mm - Table load (set-up weight): 500 kg - Loading height: 850 mm - max. Workpiece height (at max. tool length): 240 mm EQUIPMENT: - CNC-Control: Siemens 810D powerline - Lehmann A-axis and counter bearing (as new) - Direct measuring system Lhodpfev Nxbyex Ad Nob - Internal cooling through the spindle, 15 bar - Coolant system (emulsion) - Electronic hand wheel - Chip conveyor - Documentation - CE marking There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale -

Condition: used, Year of construction: 2002, functionality: fully functional, travel distance X-axis: 2,700 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,050 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, total length: 8,500 mm, table length: 2,000 mm, table width: 1,250 mm, total width: 7,500 mm, spindle speed (max.): 6,000 rpm, total height: 5,020 mm, Equipment: rotational speed infinitely variable, CNC travelling column machining centre manufactured by MIKROMAT Werkzeugmaschinen GmbH & Co. KG, Dresden, designed for precise and heavy-duty machining of large-format workpieces. The machine features a classic travelling column design and is particularly suitable for tool, mould, and mechanical engineering. Equipped with a Heidenhain TNC 430 M CNC control. Distance spindle nose – table: Vertical: approx. 300 – 1,350 mm With universal milling head (UFK): vertical: approx. –290 to +760 mm horizontal: approx. –55 to +995 mm in table area: approx. 180 – 955 mm Lhedoycw I Aspfx Ad Neb Spindle / Speeds: Spindle without extension: 10 – 6,000 rpm Spindle with extension: 10 – 6,000 rpm Universal milling head (UFK): 10 – 4,000 rpm Universal milling head (UFK): Rotation about vertical axis: 360° (indexing 2.5°) Swivel about horizontal axis: ±110° (indexing 2.5°) Electrical data (nameplate): Connected load: approx. 68 kW Nominal voltage: 400 V / 50 Hz Control voltage: DC 24 V Auxiliary voltage: 230 V Total weight: approx. 57 t CE-compliant, Made in Germany

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 87342, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,000 mm, total length: 9,000 mm, table width: 2,000 mm, total width: 4,000 mm, spindle speed (max.): 10,000 rpm, total height: 3,000 mm, rapid traverse Y-axis: 2,000 m/min, type of input current: three-phase, overall weight: 55,000 kg, controller manufacturer: Heidenhain, controller model: iTNC 530 HSCI, input voltage: 400 V, coolant supply: 20 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Swivel Head 2-axis swivel head with A-axis ±90° (180°) and B-axis 360°. Version with Hirth gearing and hydraulic clamping. Ledpfx Aeycw D Rod Nshb Spindle / Drive AC hollow-shaft spindle motor, 25 kW at 100% duty cycle, 40 kW at 40% duty cycle. Speed up to 10,000 rpm, tool interface SK40. Tool Changer Chain magazine with 22 tool stations. Equipment Chip conveyor available.

Condition: ready for operation (used), A CNC 3-axis universal milling machine Deckel (DMG Mori) is available. Travel X/Y/Z: 1200mm/600mm/500mm, tool holder: SK40, speed: 5000rpm, feed rate: 10m/min, rapid traverse: 10m/min, table dimensions X/Y: approx. 1600mm/675mm, max. table load: 2000kg. Machine dimensions X/Y/Z: approx. 3300mm/2400mm/2400mm, weight: approx. 7000kg, control: Grundig Dialog 11. An on-site inspection is possible. Ljdpfx Aoycwq Ded Nehb

Condition: new, Year of construction: 2022, functionality: fully functional, Wema Probst RHM 250 II-H milling machine NEW - Diameters from 100mm to 250mm - Electronic feed control - 2 milling heads - Head 1 = diameter 150-300mm - Head 2 = diameter 100-250mm - feed speed 6-34m/min - complete electrical cabinet + control panel Wema Probst RHM 250 II-H milling machine NEW - Diameters from 100mm to 250mm - Electronic feed control - 2 milling heads Lhodpfxoubbryj Ad Neb - Head 1 = diameter 150-300mm - Head 2 = diameter 100-250mm - feed speed 6-34m/min - complete electrical cabinet + control panel

Condition: good (used), Year of construction: 1998, operating hours: 28,500 h, functionality: fully functional, travel distance X-axis: 420 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 240 mm, spindle speed (max.): 5,000 rpm, VMC 300 Siemens 810D control SK40 12 tool positions Ledewlpb Uepfx Ad Nehb In good condition Fully functional

Condition: used, functionality: limited functionality, conventional milling machine - Documentation available: Yes - CE certificate present: No Lsdpfx Adsycu Nks Nshb - Serial number: 6029 - FYD 32 JM Year of manufacture: 1989 - Control: Conventional - Spindle head: Vertical - Power [kW]: 12.8 - Number of axes: 3 - X-axis travel [mm]: 900 - Y-axis travel [mm]: 300 - Z-axis travel [mm]: 450 - Table length [mm]: 1250 - Table width [mm]: 315 - Tool holder: ISO40 - Min. spindle speed [rpm]: 56 - Max. spindle speed [rpm]: 1800 - Transport dimensions: 1720mm x 2170mm x 2200mm;

Condition: good (used), Year of construction: 2008, Ref. -No.: 10621 Manufacturer: PAMA Type: Speedmat 3/TR16 Year of construction: 2008 Type of control: CNC Control: SIEMENS SINUMERIK 840 D PL Storage location: Halberstadt Country of origin: Italy X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 2200 mm W-Axis: 800 mm Bore Spindle Diameter: 160 mm Lhedpeyagiksfx Ad Njb Table Load: 12000 kg Table surface: 1600 x 2000 mm Tool Taper: ISO 50 BIG PLUS Turning Speeds: 3500 RPM Max. Torque: 2.765 Nm Rapid Travel X/Y/Z: 25000 mm / min Drive Capacity - Spindle Motor: 46 kW Internal cooling: 15 / 45 bar External cooling: 50 / 4 bar Spindle speed gear stage 1: 2.120 1 / min Spindle speed gear stage 2: 2.765 1 / min Further information: Automatic tool changer SK50 DIN 69871, 80 positions. Automatic angle milling head TS 35 with 360 positions, speed 2,000 rpm and torque 2,000 Nm. Automatic universal milling head TU25C (2-axis), speed 3,000 rpm and torque 800 Nm. Automatic accessory changer, 2+1 units. Touch probe (Renishaw). The machine can be inspected under power.

Condition: good (used), Year of construction: 1997, Ref. -No.: 10620 Manufacturer: SKODA Type: W 200 T Year of construction: 1997 Type of control: CNC Control: SIEMENS SINUMERIK 840 Storage location: Halberstadt Country of origin: Germany X-Travel: 16000 mm Y-Travel: 5150 mm Z-Travel: 1600 mm W-Axis: 2100 mm V-axis: 2000 mm B-Axis: 0 - 360 ° Ljdpfsyagidjx Ad Nshb Spindle Diameter: 200 mm Table Load: 80.000 kg Tool Taper: SK 60 / SK 50 Turning Speeds: 1000 RPM Rotary table diameter: 3500 x 3000 mm Further information: Including angle head Machine can be inspected under power.

Condition: good (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 2803-2693, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 6,300 rpm, spindle speed (min.): 32 rpm, quill stroke: 80 mm, quill travel distance: 80 mm, type of input current: three-phase, Equipment: documentation/manual, For sale is a precise and robust Friedrich Deckel FP3NC tool milling machine, year of manufacture 1985, equipped with a Dialog 4 CNC control system. The machine is German-made, renowned for its quality, and is suitable for tool and mould making as well as precise single-part and small-batch production. Technical Data (extract) Model: FP3NC Control: Deckel Dialog 4 Year: 1985 Serial Number: 12767 Main spindle power: 2.0 / 3.0 kW, pole-changeable three-phase brake motor Spindle speeds: 31.5 – 6300 rpm (2 ranges, manually switchable) Tool holder: SK 40 Quill Stroke (manual): 80 / 80 mm (horizontal/vertical) Travel paths: X-axis: 400 mm Y-axis: 400 mm Z-axis: 400 mm Feed rate: 2 – 3600 mm/min Rapid traverse: 4000 mm/min Clamping slots in table: 4 slots, 14H7, 63 mm spacing Total weight: approx. 1800 kg Lodpoxlghpjfx Ad Nshb Electrical connection: 380 V, 50/60 Hz, connected load 14.5 kVA Rated current: 22 A Control voltage: 24 V Equipment & Control - 4-axis contouring operation with dialog-guided input - 3D linear and circular interpolation, helical interpolation, polar coordinates - Extensive drilling and milling cycles, graphical cycle entry support - “Contour pocket” milling cycle for pocket machining (including irregular shapes and islands) - Subroutine functions, program memory up to 512 kByte - Tool offsets for up to 100 tools - Interfaces for cassette recorder, punch tape reader, floppy disk or Winchester drive (DNC-capable) Condition & Features - Machine is fully functional - High-precision, stable design – ideal for workshops, training or production - Operating manual and technical documentation available - Inspection by appointment possible

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: F4N K5 105, Emco FB5; year of manufacture 1997; accessories: sub-spindle head + approx. 10 pcs SK 40 tool holders; Prototrac control Lsdpsyctq Hofx Ad Nehb

Condition: used, Year of construction: 1969, functionality: fully functional, We offer the following: 1 x universal milling machine Wanderer, type OG/E Year of manufacture: 1969 Lhodpeycr Rxefx Ad Nob Serial number: 23128 Condition: operational

Condition: used, Type: RF 1 Machine No.: 2656 Year of manufacture: 1965 Ljdsycq Ivspfx Ad Njhb Motor power: 1.0 / 1.4 kW Spindle mount: MK 3 with drawbolt thread Table size approx.: 450 x 150 mm Estimated weight approx.: 600 kg Dimensions (W x D x H approx.): 1 x 0.6 x 1.6 m

Condition: new, The Mark Super SV, part of the Conventional Vertical Milling Machines category, excels as a mill drill with robust capabilities. This versatile machine is perfect for a wide array of applications, including drilling and milling of steel and non-ferrous metals. With its motorized cutter head movement and hand-wheel for precise positioning, the Mark Super SV ensures that you can achieve accurate results every time. It features an infinitely variable feed on the X-axis, coupled with an automated depth display, making it ideal for both single-piece machining and small series production. The digital display provides critical information like spindle speed, enhancing operational efficiency and reducing error rates. Standard equipment includes a 3-axis position indicator and a 13 mm drill chuck, ensuring that you have everything needed for high productivity. After 15 years, the Mark Super SV remains a top choice for workshops and training departments. Request a quote today to explore the capabilities of this reliable mill drill in the Milling Machines category. Lsdpfx Asqcuc Eed Nohb

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,680 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, total height: 2,500 mm, total length: 2,700 mm, total width: 2,000 mm, working range: 1,680 mm, spindle motor power: 2,200 W, number of clamping sleeves: 12, Equipment: documentation/manual, 4-axis CNC machining center ISEL Sonderanlage - 06/2007 X1680 Y1000 Z600 – spindle 2.2 kW / 15,000 rpm – table 1660×1750 mm – 4th rotary axis Ø1660 L1750 mm – PC + MAYKA (installed on integrated PC) Ready for use, operational and can be demonstrated under power. Location: Industrial zone 06510 CARROS CNC machining center / milling machine, 4-axis, brand ISEL (isel automation – Germany). Special custom-built machine “Sonderanlage” (manufacturer’s plate), year 06/2007, Serial No. 293215/1, CE marked. Primarily used for precision foam machining, but this is a true CNC machining center: the range of materials depends mainly on tooling and process parameters. Dimensions: length 2.70 m - width 2 m - height 2.50 m. Operating hours counter not accessible in this configuration. Mayka installed and fully functional on the PC. Last tested 13/01/2026: all axis movements OK. Can be inspected and tested onsite: axis travel and start-up possible. Chip extraction included but non-operational (requires servicing). Operating hours: not available (counter inaccessible) Travel: X 1680 mm / Y 1000 mm / Z 600 mm Usable table: 1660 × 1750 mm (T-slots / clamping) 4th rotary axis included: Ø 1660 mm, length 1750 mm Drive: ball screws + belts, linear rail guides Drives: servo motors Spindle ISEL F8LI2S2/-8-043: 2.2 kW, 15,000 rpm, manual tool change Tooling included: 1 tool holder + 11 collets (spindle-specific system) + clamping nut Cooling: spindle air cooling + chiller present Safety: fully guarded machine + emergency stop Noise: approx. 50 dB during operation, 65 dB during Y-axis movement Power supply: 400V three-phase, 16A – compressed air not required Lubrication: none Control / PC / Software Electrical cabinet included Ledpfx Ajycqu Njd Nehb Integrated PC + monitor + keyboard (Windows 7) MAYKA installed and functional on integrated PC (no separate dongle/USB key required) Maintenance / service history • March 2019: PC replaced • March 2019: all drive belts replaced • March 2019: iCCE10 CANopen PCIe card (1 channel) replaced • Last test: 13/01/2026 – all movements tested and operational Brand: ISEL Model: Sonderanlage Year: 06/2007 Serial no.: 293215/1 Axes: 4 (with 4th rotary axis) Travel: 1680 × 1000 × 600 mm Table: 1660 × 1750 mm Spindle: 2.2 kW – 15,000 rpm Supply: 400V three-phase – 16A PC/software: integrated PC + MAYKA

Condition: ready for operation (used), Year of construction: 2017, operating hours: 135 h, functionality: fully functional, machine/vehicle number: 6693371/1, travel distance X-axis: 1,480 mm, travel distance Y-axis: 1,090 mm, travel distance Z-axis: 617 mm, total height: 2,320 mm, total length: 2,800 mm, total width: 2,000 mm, working range: 1,480 mm, spindle motor power: 3,600 W, tool diameter: 32 mm, Equipment: documentation/manual, 4-Axis CNC Machining Center ISEL FlatCom XL142/112 EC-Servo – 10/2017 X1480 Y1090 Z617 – 3.6 kW spindle / 17,750 rpm (ER32) – 135.53 operating hours – 4th axis Ø600 L1000 – PC + remote control Ready for use, can be seen powered on Location: Industrial zone 06510 CARROS Machining center / 4-axis CNC milling machine ISEL FlatCom (iselgermany), EC-Servo configuration, year 10/2017, Serial no.: 669371/1, CE marked. Dimensions: length 2.80m – width 2.00m – height 2.32m Machine in “as new” condition, very little use, fully tested. Hours: 135.53 operating hours 144.04 powered-on hours Axes: 4 axes, with 4th rotary axis (effective diameter 600 mm, length 1000 mm) Travel: X 1480 mm / Y 1090 mm / Z 617 mm (on 4th axis) Usable table: 1540 × 1500 mm – T-slot table Transmission: ball screws, linear guideways Drives: EC-Servo motors SPINDLE / TOOLING ISEL VKH75/26-75T spindle: 3.6 kW, 17,750 rpm ER32 collet Pre-equipped for pneumatic tool changer (ATC): tool magazine not included, but can be added (arrange through supplier) 2 tool holders (1 mounted on the machine) Tool length probe included Cooling: spindle air + included chiller Control / PC / Software ISEL control + REMOTE software Lhjdpfx Adsycqm Ej Nob License included and transferable No dongle/keys/codes required PC + monitor + keyboard included (Windows 7) WORKSHOP / SAFETY Power supply: 400V three-phase, 16 A Compressed air required: yes, 8 bar (for pneumatic components) Dust extraction: not included Lubrication: none Enclosure with emergency stop Noise level: approx. 50 dB max Dust extraction port/connection prepared: no Condition / Testing Condition: “as new”, no known issues (play, errors, sensors: nothing to report) Last tested: 13/01/2026 All movements tested OK Included Machine + electrical cabinet PC/monitor/keyboard Software & license 4th rotary axis 2 tool holders + collets + clamping kit (Allen keys) Various clamping accessories + tool length probe Set of end mills / drills included (see photos) Brand: ISEL Model: FlatCom XL142/112 EC-Servo Year: 10/2017 Serial number: 669371/1 Axes: 4 + 4th rotary axis (Ø 600 / L 1000) Travels: 1480 × 1090 × 617 mm Table: 1540 × 1500 mm, T-slots Spindle: 3.6 kW – 17,750 rpm – ER32 Pre-equipped for pneumatic tool changer (ATC), magazine not included Power: 400V three-phase – 16A / Air: 8 bar Hours: 135.53 operating / 144.04 powered-on

Condition: used, Year of construction: 2003, x-travel 4.000 mm y-travel 1.000 mm z-travel 1.500 mm control Heidenhain iTNC 530 spindle tunring speed 5.000 U/min tool taper SK 50 number of tool places 40 Pos. Number of working hours ca. 15.829 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Automatic swivel head with B-axis, infinitely variable - Internal coolant supply 20 bar Lhsdpfx Aoxylqrjd Nsb - Air blower through spindle - Chip conveyor - Chip flushing Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale reserved.

Condition: used, Radial drilling machine with plate field WEBO type HRH 100 / 3000 Machine. No. 10009555/7 -- 1110185 -- 6046 Year of manufacture 1979 Ljdpfx Aofbt Huod Njhb Drilling capacity Ø 100 mm in ST 60 at feed rate 0.5 mm/rev. Nominal throat depth 3000 mm Max. throat depth max. 3100 mm Spindle holder MK 6 Spindle speed 22.4 - 1600 rpm 36 steps Feed rate 0.05 - 2.5 mm/rev 18 steps Spindle - base plate distance 970 - 2335 mm Pinol stroke 325 mm Swivel range of the arm 360 movable on bed, bed length 7500 mm Clamping area panel field 8000 x 2100 mm - Electrical central clamping - Drilling unit can be moved lengthwise on the machine bed by electric motor - Panel field consisting of 2 clamping plates with 7x T-slot, (length 4000 x width 2100 x panel thickness 360 mm) Space requirement L x W x H 8000 x 4550 x 4300 mm Maximum height 4300 mm Transport height (bed with drilling machine) approx. 3150 mm Transport weight (bed with drilling machine) approx. 20 tons Transport dimensions of panel section L x W x H 4000 x 2100 x 900 mm (2 panels stacked on top of each other) Transport weight panel field approx. 14 ton. good condition

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch Lhedslhwr Rspfx Ad Nob - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Lhjdpfeqa Txqsx Ad Neb Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN type PICOMAX 100-CNC 3 CNC control HEIDENHAIN TNC 155 make no. 16186651 year of construction 1986 spindle holder FEHLMANN SF32 drilling capacity Ø 30 mm in steel threading up to M20 in steel travel X: 850 mm, Y: 435 mm pinol stroke Z: 210 mm vertical movement milling head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid traverse X and Y 8 m/min. rapid traverse Z 4 m/min. Table clamping surface 1570 x 500 mm distance spindle nose - table 130 - 720 mm projection spindle - column 450 mm Spindle speed 50 - 7100 rpm. Stepless spindle drive 10 kW Total connected power 20 kW Mains connection 400 Volt, 50 Hz - CNC control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z pinol adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - thread cutting device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shut-off via adjustable cams - 3D probe RENISHAW, type MP 11F with holder Fehlmann SF32 - 20 tool holders FEHLMANN SF32 - swivelling tool holder with 21 tool places - Coolant device in the machine column - control cabinet fixed to the machine Ledpfx Adohik Eze Nshb - Documentation Operating manual, control manual and E-circuit diagrams space requirement L x W x H 2350 x 2000 x 2300 mm weight 3,2 ton. very good condition

Condition: used, Technical data: Working range X axis: 500 mm Y axis: 400 mm Z axis: 300 mm Work spindle Lhedpeqbq Ufjfx Ad Njb Tool holder: ISO 40 Automatic feeds: 0.2 - 0.6 - 0.12 mm/min Spindle speeds: 20 - 4000 1/min, directly programmable Feed range: X / Y / Z = 1 - 3000 mm/min Rigid table: 700 x 350 mm, 5 T-slots Fixed table: max. load capacity 250 kg Connection: 400 V Weight, approx.: 1900 kg Machine dimensions, approx.: 2400 x 1850 x 1850 mm Space requirement: 3200 x 4100 mm, height 1920 mm Features: - CNC control - Fixed table - Milling head swivels +/- 90 - Hydr. clamping device - Coolant device - Emergency stop button

Condition: used, Year of construction: 2019, x-travel 1016 mm y-travel 660 mm z-travel 635 mm control Haas Ledpfx Asyclx Ajd Nehb

Condition: good (used), Year of construction: 2004, operating hours: 19,000 h, functionality: fully functional, feed length X-axis: 800 mm, feed length Y-axis: 800 mm, feed length Z-axis: 500 mm, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, spindle speed (max.): 42,000 rpm, spindle speed (min.): 50 rpm, overall weight: 12,500 kg, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, HSC800 – 5 axes Control: Heidenhain iTNC530i Travel range (X/Y/Z): 800x800x500 mm Spindle speed: 42,000 rpm Spindle taper: HSK50 Operating voltage: 3x400V, 50Hz Power requirement: 35 kW Ledpfx Adsyciqco Nohb Compressed air: 8 bar AC motors Digital control Feed rate: 2 to 60 m/min Rotary table clamping surface, diameter: 400 mm Portal clearance width: 1050 mm Height: 650 mm External cooling unit Handheld control panel with handwheel Tool changer with 54 positions

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,100 mm, CNC 5-axis Gantry Milling Machine BELOTTI Eureka 4014 (4000x1400mm) 5-axis milling machine / machining center Belotti Eureka 4014 Model 3414. Year of manufacture 2001. Machine in stock, in good condition, fully functional. Available immediately, including a refurbished spare 4kW spindle, software, and complete documentation. Primarily intended for trimming and milling 3D parts – plastic, carbon, laminate, MDF, wood, aluminium, etc. Spindle speeds: 18,000/600Hz – 24,000/800Hz Ledpfx Adoycin Is Njhb Transport can be arranged. Axis travels:    • X-axis: 4,000 mm    • Y-axis: 1,400 mm    • Z-axis: approx. 1,100 – 1,200 mm