Used Toolholder for sale (230)

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: T40065, MACHINE SPECIFICATION Maximum swing 510mm Maximum turned diameter 290mm Maximum turning length 540mm Bed inclination 60 degrees Spindle centre height (from floor) 960mm Spindle nose A2-6 Power chucking system Hydraulic Spindle bore 77.5mm Bar capacity - collet 66mm Maximum spindle speed 5000rpm Spindle motor power 22kW Rapid travers : Z/X Axis 30/25m/min Turret: Tooling type VDI 40 Number of tooling stations 12 Number of driven tool stations 6 Maximum rpm of driven tool 4000rpm Maximum power of driven tool 3.7kW Maximum collet size of driven tool 20mm C axis increment: Fully programmable 0.001 degrees Approximate net weight 4550Kg Iijdpfxeq Atxyj Afioh Machine Equipped with Fanuc 21i-T CNC Control System Hydraulic 3 jaw chuck 3 off Radial driven toolholders 3 off Axial driven toolholders 30 off Static toolholders Coolant system Lighting Interlocked guarding  

Condition: used, Year of construction: 2002, Gildemeister cnc lathe CTX 400 S2 V3 CNC pilot control 4290 Heidenhain year 2002 C axis driven tools tool head 12 tools Sauter VDI30 spindle passage 66mm Turning diameter max. 420 mm Iisdpfsu Aahrsx Afioh Turning length max. 630 mm Konik with machine chip conveyor documentation 2 driven toolholders 1/1

Condition: ready for operation (used), controller manufacturer: Siemens 840DSL, total height: 3,325 mm, total length: 5,520 mm, total width: 3,320 mm, empty load weight: 10,000 kg, nominal power: 50 kW (67.98 HP), 5-assig simultaan bewerkingscentrum Type: K3X8F max. werkstuk: dia 700 mm max. werkstukgewicht: 300 kg afstand spilneus / boventafel: 525 mm A-as (kanteling): +30°/-180° C-as (rotatie): 360° continu snelle bewegingen: 50.000 mm/min hoge druk koeling door spindel spaantransportband trillingsbewaking lasertoolsonde Blum Micro werkstuktaster Blum TC52 Iisdpfxjwznxdo Afioh met Fanuc Robot laadsysteem RB: Robot: A05B-1330-B205 (Fanuc Robot R-1000iA/100F) Controller: A05B-2601-B112 (Fanuc-systeem R-30iB) Max longitudinal travel X-axe: 780 mm Max cross-travel Y-axe: 700 mm Max travel Z-axe: 500 mm Admission in millinghead: HSK 63A Spindlespeeds: 16 000 rpm Table size: dia 500 mm Toolholder: yes Number of tools: 36 toolpositions

Condition: excellent (used), Year of construction: 2020, For sale: SERON 2131 PRONEST CNC Machining Center with a working area of 2100x3100 mm. I also have additional machines selected to complement this machining center. The set offered in this listing includes: - Z-axis travel 300mm Expert, PRO – 1 pc. - OMRON SERVO AC HIGH SPEED drives (complete with planetary gearboxes) 1.5KW ETHERCAT - 2131 Raster vacuum table – 1 pc. - Pneumatically controlled vacuum section – 6 pcs. - Vacuum pad (porous board) – 6.51 m2 - Pump control system up to 5.5KW (protection + SOFTSTART) – 2 pcs. - Becker VTLF 2.250 vacuum pump – 5.5KW, capacity 244 m3/h, absolute pressure 200 hPa, 2 pcs. - OSAI 4-axis control system – 1 pc. - Manual controller – 1 pc. - HITECO electrospindle 13KW set (max 15KW) – ATC, up to 24,000 RPM, liquid cooled (CW6000 chiller required), tool clamping HSK63 – 1 pc. - CW-6000 active cooling system (chiller for spindle power up to 20KW) – 1 pc. - 12-position turret tool magazine – 1 pc. - Precision tool height sensor – 3 pcs. - Suction foot adapted for 4-axis machines – 1 pc. Iiodpfxoupg Rrj Afioh - Automatic centralized lubrication system, solid grease TIMKEN/SKF – 1 pc. - Positioning stops control system – 1 pc. - Positioning base (from 60mm to 120mm) – 5 pcs. - VECTRIC CUT 2D CAD/CAM – 1 pc. - SERON WOP CAD/CAM – 1 pc. - NCAD (Requirement: SERON WOP) – 1 pc. - Drilling unit control (Drilling optimization, requirement: SERON WOP) – 1 pc. - HITECO TF.C 12V.4H.2B.A boring unit (12 vertical tools, 4 horizontal tools, 2x saw) – 1 pc. - 2131 Safety fence with electronic safety system – 1 pc. - HSK-F63 (ER32) toolholder – 12 pcs. - Set of ER32 collets (range 3-20mm, 18 pcs.) – 1 set - Conveyor-type outfeed table system with cleaning/suction ledger beam set – 1 pc. - Infeed table with automatic vacuum suction cup system and worktable positioning system – 1 pc. - ZEBRA GK420T desktop printer – 1 pc. - LI4278 barcode scanner – 1 pc. This set was used for cutting and processing panels in a furniture manufacturing company. Low operating hours – only 3,331.51 hours, as shown in one of the photos. Available for inspection in 11-510 Wydminy, Warmian-Masurian Voivodeship, by prior arrangement. For technical information, please contact: 6.0.3-6.2.9-6.3.3 To arrange an inspection, please call: 5.0.2-2.3.7-2.1.6 I also have other machines and paint shops for sale. THE PRICE IS NET – sale based on VAT invoice at 23%. The machines are well maintained and in very good technical condition. I am selling them because after nearly 5 years of retirement, it is time to actually start enjoying it.

Year of construction: 2013, condition: ready for operation (used), General Data Measurements width 1600 mm Measurements depth 2700 mm Machine weight 3500 kg Control Unit Brand FANUC Model i-Series Main Drive Number of spindles 2 Spindle speed range 6000 Number of axis 4 Movement X-Axis Movement 160 mm Z-Axis Movement 550 mm B-Axis Movement 550 mm Workpiece Workpiece Z 510 mm Workpiece weight 130 kg Turret Number of turrets 1 Tool taper BMT45 Tools Number of station 12 Max tool diameter 32 mm Additional Equipment IEMCA KID 80 automatic bar feeder Set of fixed and driven toolholders Soft jaws Hard jaws This 4-axis DOOSAN Lynx 220 LMSA was manufactured in 2013. It features a FANUC i Series control unit, dual spindles with a speed of 6,000 rpm, and a comprehensive travel range with X-axis at 160 mm and Z-axis at 550 mm. It includes an IEMCA KID 80 automatic bar feeder and a set of toolholders. If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 220 LMSA machine we have for sale. Contact us for more information. Application Types Turning Isdpewzc N Refx Afisih

Condition: as good as new (ex-display), Photo No. 1408 As-new VDI40 DIN 69880 toolholder collet chuck Collet: DIN 6388-A; Type: 444E Item No.: 433011- More VDI40 tool holders can be found at www:wk-sales.de Collets DIN 444E or ER 40 with clamping nut. The collet shown in the image is for illustration purposes only Iiedpjk Nz Ehofx Afijh and is not included in the scope of delivery ø 13-14mm External diameter: 50mm External clamping length: 65mm

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 6V0148, MACHINE SPECIFICATION Iedpfx Ajwmm H Rjfioih Height of centres 170mm Swing over bed 350mm Swing over cross slide 196mm Swing in gap 535mm Width in front of faceplate 165mm Bed length between centres 650mm Spindle speeds (infinitely variable) 15-3250rpm Spindle nose mounting (Camlock) D1-4 Spindle bore 42mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 100mm Travel of tailstock barrel 145mm Taper in tailstock barrel No. 4 MT Machine in Metric execution   MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO System 3 Jaw chucks Quick change toolpost and 2-off toolholders Chuck guard Saddle mounted chip guard Coolant system Lighting Rear splashguard NB Machine ex Dyson apprentice training facility, in excellent condition

Condition: ready for operation (used), Year of construction: 2011, XYZ Proturn SLX425 ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2011) Iisdpfew Hb T Sjx Afish Max’ Distance Between Centres 1250mm Max Swing over Bed 400mm Max’ Swing over Gap 700mm Spindle Bore 80mm Spindle Speeds 25 – 2500 rev/min Spindle Motor 10hp / 7.5Kw Quick Change Tool Post Tailstock MT5 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2011 We can offer delivery & installation, operater training and warranties. Supplied with: 3 Jaw Chuck Tooling as photographed Machine Handbooks 3 Toolholders (More available if required). Tracking Coolant Worklight Auto Lubrication *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #78937 Machine Serial Number: L507 Cost: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1995, turning diameter 300 mm turning length 710 mm control SIEMENS SINUMERIC 840 total power requirement 40 kW weight of the machine ca. 6000 kg dimensions of the machine ca. m I N D E X (Germany) CNC Controlled Slant-Bed Chuck Lathe with Turret and Tailstock and INDEX CNC Control C 200 – 4 (SIEMENS) Model G 300 Year 1995 S/N 5000 65 _____ Turning - Ø, with chuck, max. 300 mm Spindle bore 90 mm Max. Workpiece Swing dia. 400 / 590 mm Turning length / travel of turning slide, (X-Achse) max. 710 mm Turret head slide cross movement (Z-Axis) max. 140 mm Turret with 12 tool holder positions DIN 30 mm Feed range of turret slide / Quickfeed 0,1 - 20 m/Min. Feed Force of X/Z-Axis 8 – 13 kN Steplessly adjustable Spindle speeds up to 5.000 rpm Torque Forceon main spindle approx. 275 Nm Spindle drive 28 kW Total electrical load appr. 40 kW - 400 V - 50 Hz Weight 6,000 kg Accessories / Special Features: Iijdpst Hw Sujfx Afijh * INDEX CNC Control Model C 200-4 resp. SIEMENS 840 C for 3 Axes X/Z Axis and Main spindle as C-Axis (Spindle Orientation) Control Panel mounted swivable on front left side of machine. * Spindle orientation in 2,5° degree steps and Spindle indexing device * Mounted hydraulic 3 Jaws Chuck make FORKHARDT Model HS 250 with many Sets of jaws. Speed up to 5.000 rpm * INDEX- Turret with 12 positions for DIN 30 tool holders, prepared for driven tools and motorized by the indexing motor, Choice of approx. 40 pieces toolholders * Hydraulic Tailstock with stroke of 50 mm and with concentricity correction device * KNOLL – Swarf Conveyor with Coolant Device and High Pressure Pump, Sliding door, Oilskimmer, etc. Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 2007, turning diameter 300 mm swing over bed 430 mm swing diameter over slide rest 300 mm Ijdpfx Afowx R Rkoijih control SIEMENS, SINUMERIK 840 D travel -x axis 160 mm travel -z axis 510 mm Part length max. 480 mm main spindle bore 53 mm main spindle speed 0 - 7000 U/min spindle head DIN 55026 A2-5 max. torque on the spindle 100 Nm main spindle drive 15 kW sub spindle bore 53 mm sub spindle speed 0 - 7000 U/min spindle head DIN 55026 A2-5 max. torque on the spindle 100 Nm sub spindle drive 15 kW C-axis resolution 0,001 ° C-axis rapid feed 1000 U/min tool turret 1 x 12 Stat. number of driven tool stations 1 x 12 tool shaft (cylinder shaft DIN 69880) VDI 25 speed of driven tools 0 - 8000 U/min max. torque 16 Nm output 4 kW feed power X/Z axis 4000 / 6000 N rapid traverse X-axis 24 m/min rapid traverse Z-axis 30 m/min total power requirement 38 kVA weight of the machine ca. 4 t dimensions of machine L x W x H 2,65 x 1,84 x 2,32 m Accessories: collet fixture 173 E on main spindle, collet fixture 163 E on sub spindle, bar loading magazine make FMB, model turbo 3-36/3200 A, YOM 2018, for bar dia. up to 36 mm and bar length up to 3200 mm, various toolholders for turret (no driven toolholders), coolant

Condition: excellent (used), functionality: fully functional, Emcomat 17D Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C New from Training Workshop Excellent Condition!!! Technical Data: >> Year of manufacture: approx. 2000 >> Machine no.: D3F H1 010 >> Centre height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges, stepless from 35 to 3000 rpm >> Tailstock quill stroke: 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 – 0.787 mm/rev >> 20 cross feeds: 0.023 – 0.406 mm/rev >> Required floor space approx. (L x D x H): 1.600 x 0.9 x 1.3 meters >> Weight: approx. 730 kg Equipment and Accessories: Iijdpfewvuf Tjx Afieh >> 3-axis digital readout from K&C, new, with 12 months manufacturer’s warranty and operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 piece three-jaw chuck NEW 160 mm, 2 sets of jaws >> Multifix B toolholder with 2 tool pockets >> Chip guard >> Coolant system About the machine: Offered here is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in very good condition. The machine is of course fully functional. The bedways are in excellent condition. The Emco is equipped with a new 3-axis digital readout from K&C and a new three-jaw chuck. Take the opportunity to inspect the machine under power on site and see the condition for yourself.

Year of construction: 2004, condition: not inspected (used), Working range and axis strokes Nr.2 working tables 1.600 x 1.800 mm Total working range with joined tables 3.220 x 1.800 mm X axis stroke = 4.300 mm ; Y/W = 3.200 mm ; Z = 300 mm Workpiece passage Z = 300 mm Vacuum pumps Becker rotary type No. 2 x 250 m3/h Mechanical structure made of monolithic steel with fixed gantry with base, side beams and upper beam thermally welded in one piece and then thermally stabilized. The upper beam has a large section 400 x 400 mm. and is made with a geometry of combined sections with very high rigidity. Osai numerical control with DOUBLE TFT MONITOR OSAI 10/510 series DIGITAL INDUSTRIAL numerical control with integrated second computer: WINLINK with TeleService Industrial Personal Computer integrated in the OSAI control. Interactive operating panel TFT color monitor dedicated to the CN OSAI part TFT color monitor dedicated to the PC Windows part. Nr.02 Electrospindles: Pantographs HSD milling cutters with right and left rotation Max. speed 32.000 rpm ISO 30 Special very high speed toolholder P = 10,5 Kw = 14,5 HP at 18.000 rpm P = 10,5 Kw = 14,5 HP at 24.000 rpm Iiedpfjhvmwkex Afieh P = 7,0 Kw = 9,5 HP at 32.000 rpm Front Ceramic Bearings Rear ceramic bearings Cooling by coolant Multi-position step-type suction hood from NC Electrospindle flanging device Digital electronic inverter Nr. 01 Setting axis (patented system) Composed by an additional

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: P40030, Used Harrison Alpha 460 Plus Gap Bed with 460mm swing x 1000mm between centres. Spindle bore 76mm. Equipped with Harrison/Fanuc GE Operator panel and screen. Very popular CNC Lathe. Specification Harrison Alpha 460plus Height of centres 230mm Distance between centres 1000mm Swing over bed 460mm Swing over cross slide 270mm Swing in gap 730mm Gap width from faceplate (approx) 216mm Spindle bored to pass 76mm Spindle speeds: Low range 2 to 500rpm High range 20 to 2000rpm Tailstock travel 145mm Tailstock diameter 95mm Tailstock taper No. 6 MT Approximate weight 2760kg Harrison Alpha 460 Plus Gap Bed CNC Lathe with Fanuc Machine equipped with 3 jaw chuck Quick change toolpost and 4 off toolholders Iodpfx Afonxkcqoieih Harrison/Fanuc GE operator panel and screen Stationary steady Guarding Lighting Coolant system

Condition: excellent (used), Here we offer you a ToX full punched rivet system. ToX full punched rivet system type TZ-VSN The full punch rivet severed all joining and pushes the slug from the joint. TOX PRESSOTECHNIK, supplemented with innovative technology for full self-piercing rivets the specialist for sheet metal connections, his delivery and performance program is a pioneering procedure. The full punch riveting offers an additional mechanical connection of sheet metal, This is for lightweight construction and the combination of hybrid parts and assemblies of great importance. The rivet advancements, forceps, and toolholders are also so universally designed, that full punching rivets with a diameter of 4.0 mm and lengths between 3.3 and 8.1 mm as well as full punching rivets with a diameter of 5.0 mm and lengths between 3.9 and 9.0 mm with TOX - hand pliers as well as with TOX robot pliers flexible can be processed. Type TZ-VSN Iiodpfodz Afwjx Afish Pressing force 55KN Total stroke 140 mm Rivet type: Diameter 5 x 4, 6 Connection values Performance: 3,4KW Power supply: 400/15/50-60 V / A / Hz Speed: 200mm / s Web form: 3 p + N + PE Control voltage: 24 V DC Back-up fuse: 25 A Type: TZ-VSN Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you. Written order possible by email or fax

Condition: used, Year of construction: 2007, Technical details: turning diameter: 325 mm turning length: 600 mm total power requirement: 35 kW spindle drive: 25 kW spindle turning speed range: 5000 U/min speeds of tool: 4500 U/min rapid traverse X-axis: 60 m/min diverse toolholders: VDI 40 Iedpfx Aevgb Epjfioih rapid traverse Z-axis: 45 m/min weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,5 x 2,5 x 2,1 m Machine with SIEMENS 840 D control power line with shopturn - C and Y-axis, driven tools - bar loader IRCO ILS-RBK - coolant device with coolant throough revolving head - Revolver - counter spindle - chip conveyor - collet clamping - part catcher *

Condition: good (used), Spindle diameter: 80 mm Spindle nose: SK50 Spindle speeds: 11 - 1000 RPM X-axis movement: 1700 mm Iiedophl Ecspfx Afish Y-axis movement: 1800 mm Z-axis movement: 1800 mm Spindle out (W-axis): 710 mm Table size: 1100 x 900 mm Elbo Digital readout: On Y-axis and Z-axis Featured with: - Turning table - Toolholders Spindle engine: 7,5 KW Machine LxWxH: 5100 x 2650 x 3300 mm Machine weight: 10 Ton

Condition: new, functionality: fully functional, turning diameter over cross slide: 600 mm, turning length: 548 mm, turning diameter: 460 mm, spindle bore: 88 mm, travel distance X-axis: 310 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 620 mm, spindle motor power: 15,000 W, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, rotational speed (max.): 3,500 rpm, total height: 2,130 mm, total length: 3,900 mm, total width: 1,992 mm, overall weight: 6,500 kg, bar passage: 77 mm, spindle nose: ASA A2-8, Equipment: documentation/manual, FOCUS LATHE MOD. FBL 320Y WITH INCLINED BED TECHNICAL SPECIFICATIONS: Numerical Control: FANUC 0i-TF plus – 15" color graphic display, remote handwheel, and Manual Guide I Max turning length: 548 mm Distance between centers: 795 mm Max swing diameter: 600 mm Max turning diameter: 460 mm Spindle bore: 88 mm Bar capacity: 77 mm Spindle nose: ASA A2-8 Max spindle speed: 3,500 rpm Spindle motor: 11 – 15 kW C axis: 0.001° positioning accuracy X-axis travel: 310 mm Z-axis travel: 620 mm Y-axis travel: ±55 mm B-axis (tailstock) travel: 650 mm Rapid traverse X-Y: 20-20 m/min Rapid traverse Z-B: 20-20 m/min Tailstock quill: MT 5 Length: 3,026 mm + 850 mm chip conveyor Ijdew A Rl Nopfx Afijih Width: 1,992 mm Height: 2,130 mm Weight: 6,500 kg COMPLETE WITH THE FOLLOWING STANDARD ACCESSORIES: - 10” hydraulic self-centering chuck Kitagawa, set of soft and hard jaws - Foot pedal for hydraulic chuck operation - Serial, Ethernet, and USB interfaces - Belt-type chip conveyor with collection cart - Rotating tailstock - 12-station motorized turret - BMT 60 toolholder system - Driven tool motor 4.5 kW - Max speed driven tools 6,000 rpm - Set of 12 static toolholders (5+3+3+1) - 3-color status and end-of-cycle signal lamp - Integrated work light - Machine leveling pads - Service keys toolbox - Oil skimmer - Mobile coolant tank - Centralized lubrication system - Pedal for hydraulic spindle - Power transformer - Operator and maintenance manuals, electrical diagrams, and CNC manuals - CE Declaration of Conformity INCLUDED ACCESSORIES: - Grundfos 9.5 bar coolant pump - Renishaw automatic tool presetting system - Spindle air blast - Industry 4.0 data exchange ready - No. 1 straight driven toolholder for BMT 60 - No. 1 angular driven toolholder for BMT 60 BRAND NEW MACHINE COMPLIANT WITH CE REGULATIONS

Condition: ready for operation (used), Year of construction: 2016, operating hours: 46,976 h, Control Unit Brand FANUC Model Series Oi-TD Additional Equipment Transformer 8 KVA / Airblow through the spindle / LNS chip conveyor / Interface for high pressure coolant system with 4 M-codes This Citizen Miyano GN-3200 was manufactured in 2016. It features a Fanuc 0i-TD control, an 8 KVA transformer, MAS quick change toolholders, and a collet chuck device. Additional features include an airblow through the spindle, a tool breakage sensor, a Blum measuring probe, and an LNS chip conveyor. Interface for high-pressure coolant system with 4 M-codes also included. Contact us for more information about this machine. Ijdjwvmr Ejpfx Afisih Application Types Turning

Condition: new, functionality: fully functional, EUROPA eturn VS390. The workhorse of any workshop or toolroom, a 390mm swing over the bed and choices of 760, 1000 or 1250mm between centres. Newall DRO and Bison Chucks are standard across the Europa Lathe Range. Iiodpfx Aenzhtwefioh Machine Specification EUROPA eturn VS390 Swing over bed 390mm Centre height 190mm Swing over cross slide 240mm Swing in gap 610mm Spindle Nose D1-6 (Camlock) Spindle Bore 54mm The EUROPA eturn VS390 Series is a gap bed centre lathe with a 390mm swing over the bed, 610mm in the gap and is available in three distance between centres. 750mm (30”), 1000mm (40”) and 1250mm (50”). Colchester Triumph sized machine. EEMT: Europa Energy Management Technology: The machine switches to a ‘sleep mode’ once a preset time limit has passed of inactivity. One press of a safety button and the machine is ready for operation. Reducing energy overheads. BISON: Bison 250mm dia 3 jaw scroll & 4 independent Jaw chucks with hard jaws are supplied as standard equipment. Manufactured in Europe, BISON chucks are manufactured to DIN55029, ISO702/11 standards for accuracy. NEWALL: A NEWALL NMS300 Digital Readout is professionally fitted and located on the saddle for operator ease of operation in mind. It makes so much sense, to install the DRO close to where the operator has his turning tool. The DRO travels with the machine. ELECTRONIC Variable Spindle Speed: Each model features a Schneider inverter controlling the spindle for exact turning requirements allowing you to select the correct turning speed for the job in hand. No hidden costs! Machine ready for turning: A Quick Change Toolpost complete with a set of toolholders ensures the EUROPA eturn VS lathe is supplied ‘ready for operation.’ DIN8605: An industry recognised quality standard, the entire range of EUROPA eturn VS lathes are built to the demanding toolroom standards of DIN8605

Condition: excellent (used), Here we offer you a ToX full punched rivet system. ToX full punched rivet system type TZ-VSN The full punch rivet severed all joining and pushes the slug from the joint. TOX PRESSOTECHNIK, supplemented with innovative technology for full self-piercing rivets the specialist for sheet metal connections, his delivery and performance program is a pioneering procedure. The full punch riveting offers an additional mechanical connection of sheet metal, This is for lightweight construction and the combination of hybrid parts and assemblies of great importance. The rivet advancements, forceps, and toolholders are also so universally designed, that full punching rivets with a diameter of 4.0 mm and lengths between 3.3 and 8.1 mm as well as full punching rivets with a diameter of 5.0 mm and lengths between 3.9 and 9.0 mm with TOX - hand pliers as well as with TOX robot pliers flexible can be processed. Type TZ-VSN Pressing force 55KN Total stroke 140 mm Rivet type: Diameter 5 x 4, 6 Iiedpsdz Af Asfx Afioh Connection values Performance: 3,4KW Power supply: 400/15/50-60 V / A / Hz Speed: 200mm / s Web form: 3 p + N + PE Control voltage: 24 V DC Back-up fuse: 25 A Type: TZ-VSN Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you. Written order possible by email or fax

Condition: ready for operation (used), Year of construction: 1995, Fanuc 0T Chuck diam. 210 12x turret Set of toolholders Tailstock with quill in cycle chip conveyor Presetting reset tools Aspirator condensation Turning diameter mm. 270 Turning length mm. 500 Bar passage mm. 51 Spindle motor power kW 11/15 Rapid X axis m / min 12 Fast Z axis m / min 16 4000 rpm Iedpfx Aew Ap Uisfioih

Condition: good (used), turning diameter over cross slide: 255 mm, spindle bore: 56 mm, turning diameter over bed slide: 430 mm, turning length: 1,000 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 19 rpm, power: 7.5 kW (10.20 HP), Centre distance: 1.000 mm Swing over bed: 430 mm Swing over cross slide: 255 mm Spindle speeds: 19 - 2.000 RPM Ijdpfx Aetx Tuwefieih Spindle bore: 56 mm Featured with: - Various Multifix toolholders - Coolingpomp Country of origin: Germany Motor power: 7,5 kW Machine LxWxH: 360 x 103 x 130 cm Machine weight: 1800 kg

Condition: ready for operation (used), Max. swing over bed: 460 mm. Max. turning diameter over carriage: 258 mm. Center height: 225 mm. Distance between centers: 1000 mm. Bed width: 300 mm. Spindle drive: 5.5 kW. Max. spindle speed: 3,000 rpm. Spindle nose: CAM LOCK 6”. Spindle bore: 58 mm. Longitudinal travel: 850 mm. Cross travel: 210 mm. Rapid traverse (cross): 5 m/min. Tailstock quill diameter: 68 mm. Tailstock quill stroke: 127 mm. Tailstock taper: Morse MT4. Toolholder clamping system: Capto C4. Machine dimensions: 2500x1350x1800 mm. Net weight: 1,780 kg. MACHINE CONFIGURATION: FAGOR 8055T teach-in CNC control. Iedpfx Aew Ap N Tjfijih

Condition: excellent (used), travel distance X-axis: 22,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,600 mm, table length: 22,000 mm, table width: 2,000 mm, rotary table diameter: 2,000 mm, Double-column milling machine Technical Data Travel paths per machine • X-axis (bed): 22,000 mm • Y-axis (vertical): 2,600 mm • Z-axis (spindle carrier horizontal): 1,500 (1,200) mm Control • CNC control: Heidenhain TNC 430 Automatic tool changer • Tool robot • 90 magazine positions Universal milling head in orthogonal design • Swivel range toolholder: 360 x 1 degree • Swivel range milling head: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed: 3,200 rpm 2x chip conveyors • Discharge height above floor: 1,250 mm • Feed length: 24,000 mm Table field • Clamping area: 22,000 x 2,000 mm Rotary table • Clamping area: diameter 2,000 mm About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include, among others, spare parts supply, on-site customer service, machine overhauls as well as control system upgrades. Services: - Used machines - Spare parts Iijdpfx Afswi Iaqeish - Customer service - Machine service - Machine overhauls - Control system modernization _____ _____ _____ Used machine - used milling machine - used travelling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used milling machine (alt. spelling) - used CNC milling machine - used drill-milling machine - used metal milling machine - used metal mill - used metal milling machine - used CNC milling machine - CNC milling machines - CNC milling machines - milling machine - large part machining - large part machining (alt. spelling) - large part machining - CNC large part machining - milling - shw - uf6 - uf 6 - Uniforce - SHW UF - SHW Uniforce - SHW Uniforce 6 - UFZ 6 - UFZ6L - UFZ 6 L - Heidenhain - MBM milling machine - MBM machine - column milling machine

Condition: good (used), travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 1 rpm, quill stroke: 60 mm, mount diameter: 40 mm, total height: 2,000 mm, total width: 2,000 mm, total length: 2,000 mm, table width: 700 mm, table length: 425 mm, power: 5 kW (6.80 HP), X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Table size: 700 x 425 mm Spindle nose: SK 40 Spindle speeds: 1 - 4000 rpm Spindle stroke: 60 mm Featured with: Iiodpsrxry Tsfx Afieh - ISO toolholders - Cooling unit - User Manuals Country of origin: Germany Motor power: 5 kW Machine LxWxH: 200 x 200 x 200 cm Machine weight: 2000 kg