Used Toolholder for sale (230)

Condition: good (used), Year of construction: 2000, Morgan Rushworth NC Downstroking Pressbrake – Year 2000 120 tonnes x 4000 mm. NC Backguage. Safety Guards. Top and Bottom Tooling and Toolholders. Iijdpfxsxau Els Afieh

Condition: new, Year of construction: 2024, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SCR 44 2SF, Vertical Turning center SCR 44 – 2SF - Tech data Nominal Turning Envelope Faceplate Diameter 4.000 Machining Diameter 4.400 mm Machining Heights 2.000 mm Work Piece Weight 16,000 kg Nominal Travels X-Axis Rams Carriage 2,500 mm W-Axis Elevating Cross Rail 1,200 mm Indexing step 300 mm Z-Axis Ram vertical travel 1,250 mm Isdpfx Afog Uwmqjijih Work Table WorkTable Diameter 4.000 mm WorkTable Speed 1 - 60(90) rpm Power Continuous S1 100 kW Torque Continuous S1 110,000 Nm WorkTable C axis 0.02 to 1.5 rpm Power Continuous S1 11 kW C axis Torque Continuous S1 55,000 Nm Locking Table Torque 80,000 Nm Z-Axis Milling Ram Ram Size Turning Milling 250 X 250 mm Turning / MillingTool type KM 63 - ISO 50 DIN 69871 Ram Milling Capability Ram Speed 0 to 2,500 rpm Power Continuous S1 40 kW Torque Continuous S1 1.400 Nm Toolchanger Number Of Tool Magazines 2 X ATC for 12 turning / milling tools Tool Storage 24 Axes Drives X1,2-Axes horizontal axis Power Continuous S1 5.5 kW Thrust Continuous S1 50,000 N Z-Axis Ram Power Continuous S1 5.5 kW Thrust Continuous S1 50,000 N W-Axis Cross-Rail vertical movement Power Continuous S1 11 kW Axes Rates X1,2 And Z1,2-Axes Feed Rates 0.02 to 10,000 mm/min W-Axis Elevating Rate 400 mm/min Coolant System Coolant Tank Capacity 2,000 L Coolant Pressure / Flow Rate: -internal coolant (milling) -external coolant (turning) Filtration unit: -type -filtration size 40 bar at 40 LPM 5 bar at 100 LPM Cartridge type 25 µm Horizontal Drilling Head For inside and outside drilling operations. Maximum speed 3.000 rpm Power 42 kW Toolholder tape ISO 50 DIN 69871 CNC Control -producer Sinumerik 840 Dsl Siemens Accuracy Positioning: X ±0.010 mm / m Z ±0.010 mm /m C ±3 arcsec Repeatability: X 0.020 mm Z 0.020 mm Overall dimensions Length x Width x Height 11,000 x 6,600 x 7,500 mm Weight 79.000 kg Minimum Fused Disconnect 140 KVA

Condition: ready for operation (used), travel distance Z-axis: 510 mm, feed length X-axis: 850 mm, feed length Y-axis: 510 mm, nominal power (apparent): 15 kVA, controller manufacturer: Siemens 810, total height: 2,220 mm, total length: 2,480 mm, total width: 2,740 mm, empty load weight: 4,500 kg, rotational speed of tool magazine (max.): 8,000 rpm, additional equipment features: yes, afstand tussen spindel en tafel: 150 660 mm Siemens uitgerust met ShopMill Table dimensions: 1000 x 450 mm Depth of throat (uprights-spindlecenter): 550 mm Admission in spindle (ISO): ISO 40 Iijdpfxowwbfio Afijh Power on the spindle: 7,5 kW Number of axes: 3 axes Toolchanger: yes Number of toolholders: 20 positions

Year of construction: 2006, condition: ready for operation (used), Control Unit Brand Okuma Model OSP-P200L Main Drive Spindle speed range 4200 rpm Spindle motor power 22 kW Number of axis 3 Movement X-Axis Rapid Traverse 20 m/min Z-Axis Rapid Traverse 25 m/min Turret Number of turrets 2 Additional Equipment Renishaw tool probe USB, PCMCIA, and RS232 ports Chip conveyor (hinged belt type) Tool load monitoring and effort control Dual pedal for chuck and tailstock operation Fully equipped with static and live toolholders This 3-axis Okuma LU 300 MY was manufactured in 2006. It features a robust 22 kW spindle motor, dual turrets with live tooling, and a bar capacity of 75 mm. The machine offers a maximum turning diameter of 380 mm and a length of 1050 mm. It includes a programmable hydraulic tailstock, C-axis, Y-axis, and an OSP P200-L control for enhanced precision. If you are looking to get high-quality turning capabilities, consider the Okuma LU 300 MY machine we have for sale. Contact us for more information. Application Types Iisdpfx Afew Rhalsijh Turning

Condition: ready for operation (used), Year of construction: 2002, XYZ TC250 Vulcan Turning Centre Year of manufacture 2002 Ø250mm 3 Jaw Power Chuck. Max. Swing Ø500mm. Max. Swing Over Cross Slide Ø330mm. Max. Turning Length 650mm. Spindle Bore Ø87mm. Max. Bar Capacity Ø77mm. Axis Travel 'X'=220mm, 'Z'=650mm. Maximum Spindle Speed 3,500rpm (22.5kW Motor). Spindle Nose A2-8. 12 Position Turret (VDI 40 Toolholders). *For sale with Jet Machinery Ltd* Stock No: 78992 Serial No: 202068 Price: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Iiodpfxsw U Ekco Afioh Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), 1 used lead and feed screw lathe Make: Weiler Model: Condor VS 2 Technical Data: Centre height: 160 mm Centre distance: 800 mm Spindle bore: 40 mm Bed width: 240 mm Speeds: 12 - 2800 rpm Drive power: 3 kW Tailstock taper: MK 3 Quill stroke: 110 mm Feeds: 0.037 - 1.253 mm/rev Weight, approx.: 800 kg Dimensions (W x D x H), approx.: 1930 x 880 x 1470 mm Iisdpfx Aew Rcrcsfish Equipment: 3-jaw chuck Quick-change toolholder system Multifix

Condition: used, TECHNICAL DETAILS - maxi bar diameter : 32 [mm] - maxi feed length : 178 [mm] - maxi turning length : 63.5 [mm] - number of spindles : 8 - number of cross slides : 8 - electromagnetic clutch - number of spindle speeds : 26 - spindle speed : 199-2737 [rpm] - independent feeds normal strokes : 73 [mm] - dimensions : 6632 x 1357 [mm] - weight : 7950 [kg] EQUIPMENT - Saco hydraulic pick up station 7 - Stock reel and stand - Magnetic swarf conveyor - Fume extractor Iedpeuhanyofx Afioih - Part catcher - End of bar catcher - Part conveyor belt - High pressure pump - Part off toolholder station 7 - Drill holder station 8 - Bracket toolholder for center bloc station 1 - Bracket toilholder and drill holder station 1 - CNC cross slide RTECH position 5 : 2 axis with CNC FANUC Oi-TD command - Barloader IEMCA PRA40/42F

Condition: used, Year of construction: 2018, Technical details: turning diameter: 356 mm turning length: 705 mm control: CELOS M730 UM MAPPS Iijdpow Av T Sofx Afish swing dia.: 742 mm standard turning diameter: 275 mm travel -x axis: 260 mm travel -y axis: 100 (+-50) mm travel -z axis: 795 mm rapid travel - longitudinal/face: 30 / 30 m/min rapid traverse Y-axis: 10 m/min Rapid travel B-axis (parts transfer subspindle): 734 m/min Spindle 1 RPM: 4000 1/min Spindle 1 Power: 18,5/18,5/15 kW Spindle 1 max. bar diameter: 80 mm Spindle 2 RPM: 4500 1/min Spindle 2 power: 11 / 7,5 kW turret stations / rotary tool stations: 20 / 20 BMT40 : 5.5/5,5/3,7 kW speed of driven tools: 10000 1/min total power requirement: 38 kVA weight of the machine ca.: 6,3 t dimensions of the machine ca.: 4 (9) x 2,1 x 2,2 m Accerories Chip conveyor Barfeeder Interface Parts catcher Parts and total counter Signal lamp 3 colors Spindle 1 Chuck Kitagawa B 210 (250 mm) Spindle 2 Chuck Kitagawa B 206 (160 mm) Conveyor for partsdisposal Automatic door Robot interface High precision Turning and Milling Centre with Y-axis and sub spindle. Easy programming by CELOS-MAPPS 4 Control. Very low cutting hours. Machine is like new. All existing toolholders and life tool holders come with the machine. *

Condition: used, Year of construction: 2017, Akira Seiki PC700 HSC Control unit mitsubishi m70 control RPM: 15.000 inline servo spindle Rapid traverse: 40m/min Working range: 700mm x 400mm x 330mm Tool changer: 21 atc Maximum tool diameter: 80mm Maximum tool length: 200mm Cooling tank capacity: 200l Available connection interfaces: ethernet/usb External coolant External air cooling Minimum Quantity lubrication Oil Skimmer Iodjw Tqvnspfx Afijih Spindle Chipper Coolantgun washdown Airgun Manuals included All toolholders included Haimer 3D Taster Mistaway mist extraction unit Zero point workholding on the table Postprocessor for Fusion360 included Machine will be cleaned off chips and coolant before transport

Condition: new, Precision Center Lathe and Center Lathe Make: OPTIMUM Model: OPTiturn TZ 4V Item No.: 3432245 Condition: New machine Ijdpfx Asg Hkmrjfisih center height: 200 mm center width: 800 mm speed: 50 - 3.000 rpm infinitely variable via 2 gear steps with SIEMENS Inverter-Vario-drive equipped as standard with: - 3-axis digital display DPA 32 - digital speed display in headstock - fixed center point MK 3 - quick change tool holder size B - turning toolholder BD - reducing sleeve MK 6 / MK 3 - steady rest fixed ø 10 - 130 mm - steady rest travelling ø 10 - 100 mm - Coolant device - Chip tray, extendable - LED machine light - Operating tool

Year of construction: 2016, condition: excellent (used), MORI-SAY TMZ 8/67, year 2016, like new, only 1 year and half production. – Cucchi-BLT bar-loader Bundle for 5 m bar long with 52 mm bar capacity Machine with : – Hirth coupling – Collets Hainbuch BZISK80 – Siemens SINUMERIK SOLUTION LINE 840 SL for driving 8 spindle with C axis 8 CN frontal slides 8 CN cross slides : stations 1, 2, 3, 4, 7, XZ axis stations 5, 6, Y axis with 3 fixed stations 8, U axis part-off or driven toolholders stations 8, Y axis for back burring with 3 fixed 3 driven toolholders Iiedpfoir Ikdox Afijh – Swarf conveyor with magnetic drum – Arm part catcher – Belt parts conveyor – Kraft and Bauer fire system – Losma HP Pump 70 bars, 100 L/min – Chiller green Box – UAS Fume extractor Machine in good condition like new, please ask for more informations.

Condition: used, Year of construction: 1989, turning diameter over bed 0390 mm turning diameter over slide rest 240 mm turning length 1270 mm centre height 190 mm centre distance 1270 mm spindle bore 54 mm speeds 25 - 2000 U/min feeds longitudinal slide 0,04 - 1 mm/U feeds cross slide 0,02 - 0,5 mm/U weight of the machine ca. 2,8 t dimensions of the machine ca. 2,5 x 1 x 1,3 m voltage 380 V Many accessories such as steady, chuck, faceplate, toolholders, collet chuck with collets. Iedpfew H Dkgsx Afieih

Condition: used, Year of construction: 2001, turning diameter 500 mm turning length 1000 mm control MONFORTS CONTROL control SYSTEM MTC-K turning diameter over bed slide 290 mm spindle bore 70 mm spindle turning speed range 3 - 2800 U/min Isdpfx Afjvh I Hvoioih spindle power 15 kW max. torque on the spindle 1530 Nm spindle head DIN 55027 Gr. 8 feed power X/Z axis 11300 N rapid travel - longitudinal/face 10 / 5 m/min bed width 360 mm travel of cross-slide 265 mm upper slide travel 140 mm turning tool - shaft cross cut 32 x 25 mm tailstock quill diameter 80 mm tailstock quill stroke 160 mm tailstock taper MT 5 weight of the machine ca. 3,1 t dimensions of machine L x W x H 2,88 x 1,68 x 2,18 m Accessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolant

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Weiler Primus VC Precision Centre Lathe 3-axis Digital Readout K&C NEW with VC Drive, Stepless Speed Adjustment, and CE Compliance, Very Good Condition Technical Data: Isdpow Idllsfx Afijih >> Year of manufacture: 2003, Machine No. 646 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: up to 4000 rpm, stepless >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock Morse taper 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread types: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: from 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle brake can be activated >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Accessories and Equipment: >> 3-axis Digital Readout K&C NEW >> Collet chuck system with collets from 3 to 26 mm, new, 1 mm increments, NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 toolholders >> Electric chip guard >> Machine feet >> Splash guard About the Machine: This offer is for a Weiler Primus VC lead and feed screw lathe, built in 2003 and in very good original condition. A very nice lathe with VC drive and stepless spindle speed control. The digital readout and scales from K&C are new. This newer generation of Weiler lathes is very user-friendly and can produce ground-like surface finishes. The K&C digital readout makes operation even easier and more precise. Take the opportunity to inspect this machine under power on site and be convinced of its condition.

Condition: good (used), Universal Milling Machine MAHO MH 800 - Travel (X/Y/Z): 700-350-450mm - Table clamping surface: 940x510mm - Spindle taper: ISO 40 - Spindle speeds: 32-1600 rpm - Automatic longitudinal / cross feeds - Automatic feed / vertical milling head - Coolant system - Various toolholders Iodpfx Afjw I Rz Teisih - FURTHER TECHNICAL DATA / See photo Dimensions: LxWxH 1.9x1.7x1.9 meters / Weight 3500 kg Subject to errors and input mistakes.

Condition: good (used), Year of construction: 1999, Machine has 12,300 operating hours Gildemeister NEF 320 / cycle lathe, Year of manufacture: 1999, Control: Manual Plus, Centre distance: 750 mm, Swing diameter over bed: 320 mm, Spindle speed up to 4,000 rpm, 2 gearbox stages, Multifix toolholder, Tailstock, 2 steadies, Accessories, Isdpfx Afjw Rm Tdoieih

Condition: used, Year of construction: 1999, Technical details: x-travel: 1250 mm y-travel: 880 mm z-travel: 800 mm control: Heidenhain TNC 430 tool change unit: 60 Pos. Isdpfjtq Nlcox Afioih Tool bore: SK 50 turning speeds: 8000 1/min size of pallet: 1000 x 800 mm total power requirement: 56 kVA weight of the machine ca.: 14,3 t dimensions of the machine ca.: 5,5 x 3 x 3,1 m 5-axis machine with controlled universal milling head (B-axis), 2-palett changer incl. 2 palets, 1000 x 800 mm Production package: - internal coolant supply 40 bar with 900l coolant box (2,25 x 1.3 x 2,2m / 950kg), - chipconveyor (4,85 x 1,2 x 1,75m / 600kg), - ROTOCLEAR, - 3D touchprobe RENISHAW MP 10 - 60 pos. ATC SK 50 - el. handwheel - mech. tool-breakage control, accessories (SK 50 toolholders approx. 100.200 h "machine on", approx. 52.200 h "spindle on", last spindle change in 2020 *

Condition: refurbished (used), Centre height 1000 mm Swing over bed 2000 mm Turning diameter 1600 mm Turning length 10 000 mm Spindle bore  105 mm Main power motor 71 kW Maximum torque of the spindle 40 000 Nm Ijdpfx Afsn Up R Soijih Chuck plate dia.  1600 mm Tooling system : tool turret or double-shelf toolholder - to be agreed Control system : Sinumerik 840 D sl Number of spindle speeds 3 Spindle speed ranges 250 rpm ( for the chuck dia. 1600) Longitundial / cross rapid traverse 4000 mm Tailstock quill dia.  280 mm Tailstock quill travel 200 mm Load carrying capacity : max. weight of workpiece in centers: 30,000 kg max. weight of workpiece in centers with one steady rest 35,000 kg two steady rests 40, 000 kg Lathe dimensions and weight : height 2400 mm width 3000 mm length 15700 mm ( turning lengh + 5700 mm) weight of the lathe TCF200 x 10 m : 46,000 kg Scope of overahul : The lathe TCF 200 x 10m totally disassembled for the overhaul. Bed and carriage guideways are ground and matching surfaces lined with antifriction material. Headstock and tailstock – replacement of all used parts ( all new bearings ). Carriage – replacement of all used parts and installation a new ball screw for X axis drive Drive system for Z axis - REDEX /brand new/; Installation of the new CNC system Sinumerik 840 D sl with PLC program; Installation of the new feed drives from Siemns with power 50 Nm Installation of the new control cabinet and control panels; New wiring/ cables and all electrical equipment; New painting and new geometry as per ISO 1708

Condition: new, Year of construction: 2021, Precision center lathe and feed spindle lathe Make: OPTIMUM Model: OPTiturn TZ 4 Item no.: 3432240 Condition: New machine Isdpfx Asgqw U Rofieih Center height: 200 mm Center width: 800 mm Speed: 45 - 1,800 rpm (16 steps) equipped as standard with - 3-axis digital readout DPA 32 - MK 3 fixed center point - quick-change toolholder size B - BD turning tool holder - Reducing sleeve MK 6 / MK 3 - Fixed steady rest ø 10 - 130 mm - Moving steady rest ø 10 - 100 mm - Coolant device - Chip tray, extendable - LED machine lamp - Operating tool

Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 20095 / 2004 / 05, Bidding obligates you to pick up the item on time by 05/09/2025! Loading of the machine will be carried out by the seller! The industrial PC of the machine, valued at approx. €13,000, was replaced in 2023! TECHNICAL DETAILS Processing length: 8 m EQUIPMENT Shown angle heads Toolholders Iodpfx Afew Nql Ueieih

Condition: ready for operation (used), Year of construction: 2013, operating hours: 44,078 h, functionality: fully functional, machine/vehicle number: 8089000198B, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, bar passage: 60 mm, controller model: Fanuc 31i MSL 42-7 60-742-7, counter spindle speed (max.): 5,000 rpm, Automatic lathe with comprehensive equipment! TECHNICAL DETAILS Main Spindle Spindle speed: 5,000 rpm Spindle bore: 65 mm Bar capacity: 60 mm Counter Spindle Spindle speed: 5,000 rpm Turning diameter: 42 mm Travel Axes Travel X1/X2/X3: 60 mm Travel X4: 130 mm Travel Z2: 80 mm Travel Z3: 80 mm Travel Z4: 340 mm MACHINE DETAILS Total weight: 3,500 kg Control: Fanuc 31i MSL 42-7 60-742-7 Iedpfsw Nqa Eex Afioih Spindle hours: 44,078 h Operating hours: 64,405 h EQUIPMENT Hinged belt chip conveyor Bar loader interface Electrical and software preparation Radially driven tooling Powered drilling and milling equipment 4-position base holder for Slide 3 Drilling and milling unit Axially driven tooling Twin toolholder ER 11 collet chuck 20x20 mm toolholder for slide Drill holder for turret Toolholder for rear machining, including slide for rear machining 20x20 mm toolholder for rear machining 32 mm diameter drill holder Collet holder for main spindle Collet holder for sub spindle Collet chuck ROEHM KFD HS 112-3 Tool wear monitoring software for Fanuc C-axis main spindle

Condition: used, Horizontal machining center, 6 pallets Ijdet Ek Slepfx Afioih Priced to sell - dismantled and loaded into truck OKUMA MA40 HA 6P OSP U100M CNC 6 pallets 400mm x 400mm max 400 kgs max workpiece dimensions 600*710 Spindle BT40 / coolant through the spindle 4th axis 1° Tool changer: 100 pos. 200 TOOLHOLDERS ARE AVAILABLE X = 560mm, Y = 610mm, Z = 560mm 40 m/min under power Mimu Machine Tools (Italy) X: 560 pallet: 6 Pallet size: 400*400

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 6V0146, MACHINE SPECIFICATION Height of centres 170mm Swing over bed 350mm Swing over cross slide 196mm Swing in gap 535mm Width in front of faceplate 165mm Bed length between centres 650mm Spindle speeds (infinitely variable) 15-3250rpm Spindle nose mounting (Camlock) D1-4 Spindle bore 42mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 100mm Travel of tailstock barrel 145mm Taper in tailstock barrel No. 4 MT Machine in Metric execution Iisdpowmm S Tsfx Afioh   MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO System 3 Jaw chucks Quick change toolpost and 2-off toolholders Chuck guard Saddle mounted chip guard Coolant system Lighting Rear splashguard NB Machine ex display Dyson apprentice training facility, in excellent condition

Condition: as good as new (ex-display), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 0153, Specification Europa VS660 Centre height 330mm Distance between centres 1500mm Swing over bed 660mm Swing over cross slide 430mm Spindle bore (max. bar dia) 104mm Spindle nose mounting D1-11 Camlock Taper in spindle bore No. 7 Morse Swing in gap 860mm Width of bedways 480mm Total travel of cross slide 390mm Total travel of top slide 190mm Total travel of tailstock barrel 300mm Spindle speeds (infinitely variable) 18 – 1400rpm Drive vee belt and clutches Spindle motor 20HP Imperial pitches (73) 2-84TPI Diametral pitches (27) 8-72DP Metric pitches (51) 0.2 – 14mm Module pitches (20) 0.2 –3.5 MOD Approx. weight 3800 kg Machine in Imperial execution Europa VS660 Gap Bed Centre Lathe in stock in the UK Machine equipped with Fagor 2 axis DRO system with CSS ( Metric and imperial read out options) 3 jaw chuck Quick change toolpost and toolholders Rapid power traverse to saddle lighting Coolant system Chuck guard Rear splash guard Iedpfxjnxi H Uj Afioih

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 4/0009/07423DD, MACHINE SPECIFICATION Distance between centres 1000mm Centre height 165mm Swing Swing over bed 335mm Swing over cross slide 209mm Spindle Bored to pass 40mm dia Nose D1-4 Camlock Morse taper in nose N0 3 Width of bedways 231mm Travel Total travel of cross slide 209mm Total travel of top slide 95mm Total travel of tailstock barrel 146mm Speeds Spindle speeds (16) 22-1800rpm Spindle motor Threads 2.25Kw Whitworth threads (45) 2-72tpi Diametral threads (21) 8-44 Metric pitches (39) 0.2-14.0mm Module pitches (18) 0.3-3.5 Feeds Sliding feeds 0.001-0.0740 ipr/spindle Surfacing feeds 0.0005-0.020 ipr/spindle Tailstock Approx weight 800Kg Machine in Metric execution   Isdpsv Imi Asfx Afieih MACHINE EQUIPPED WITH Goodwin 2 axis DRO system 3 & 4 jaw chucks Faceplate Quick change toolpost and 3 off toolholders Dual metric/imperial reading dials fitted to top slide & cross slide Apron dial Bedstop Lighting Coolant system Chuck guard Rear splashguard