Used Toolholder for sale (276)

Condition: excellent (used), Year of construction: 2017, operating hours: 35,000 h, functionality: fully functional, Year of manufacture: 2017 Commissioning: 06-2017 Spindle hours: approx. 8,000 Control: Mazatrol Smooth X 5-axis simultaneous machining Maximum turning diameter: 658 mm Maximum turning length: 1,519 mm Travel paths: - X-axis: 615 mm - Y-axis: 250 mm - Z-axis: 1,585 mm - W-axis: 1,574 mm - B-axis: -30° to 210° Rapid traverse: - X/Y/Z/W: 50/40/50/30 m/min Main spindle: - Drive power: 30 kW - Maximum spindle speed: 4,000 rpm - C-axis - Max. bar capacity: 80 mm Sub spindle: - Drive power: 26 kW - Maximum spindle speed: 4,000 rpm - C-axis Milling spindle: - Drive power: 24 kW (oil-air lubrication) - Maximum spindle speed: 12,000 rpm - B-axis: 0.0001° - Capto C6 Tool magazine / ATC: - 72 tool stations - Max. tool diameter: 90/125 mm - Max. tool length: 400 mm - Max. tool weight: 12 kg Special equipment: - Mayfran Consep 2000 II chip conveyor, dual change filter - Preparation for high pressure coolant (IKZ) 70 bar - 70 bar high pressure pump, 7 pressure stages - Air blow device at upper turret - Interface for bar feeder - Automatic parts catcher (D:80 x L:150 x 5 kg) - Gear milling - Milling spindle synchronized thread cutting - Constant incline angle during rapid traverse movement - Thread re-cutting function - Turning/milling function in Mazatrol - 5-axis machining package for SmoothX: - EIA/ISO 5-axis simultaneous machining Nedpfx Ajyam D Ujh Hswb - F) Tool tip control for 5-axis simultaneous machining - Spline fine interpolation - 5-axis spline interpolation - Sub spindle with C-axis including synchronization C1+C2 - Preparation for multiple and flash tool toolholders Dimensions / Weight: - Dimensions (L x W x H): 4,910 x 2,800 x 2,720 mm - Weight: 16,900 kg General machine options: - B-axis 0.0001° - C-axis main spindle input accuracy 0.0001° - Sub spindle positioning without C-axis input accuracy 0.001° - Absolute positioning system (linear axes) - Working area lighting - Operator door with safety interlock - CE standard - Double foot switch for both main and sub spindle - Separate switches for opening/closing chucks - Hydraulic pressure lock - Fully enclosed work area - Automatic opening/closing of chuck jaws for main and sub spindle - Chuck status feedback for main and sub spindle - Chuck status feedback via sensors - Tooleye for upper and lower turret - Lead error compensation input X, Y, Z - Standard tool set (lower turret)

Condition: used, Year of construction: 1977, faceplate diameter 2500 mm swing diameter 2700 mm turning height 2000 mm cross rail - adjustment 1500 mm workpiece weight max. 20.000 kg total power requirement 71 kW Control Siemens Sinumerik 840 Single-column vertical lathe 2000 x 2000mm Njdpfxeuddpgs Ah Hewb Retrofit: 1997 Gr. turning diameter: 2700mm Gr. distance f. face plate to bottom of toolholder: 2150mm chisel holder: 2150mm Support swivelling up to 30° Chisel cross-section: 240x240mm small plunging diameter: 300mm Special equipment: Re-moulding, taper turning, thread cutting, constant cutting speed

Condition: ready for operation (used), Year of construction: 2006, spindle speed (max.): 4,200 rpm, spindle motor power: 22,000 W, controller manufacturer: OKUMA, controller model: OSP-P200L, number of axes: 3, This 3-axis Okuma LU 300 MY was manufactured in 2006. It features a robust 22 kW spindle motor, dual turrets with live tooling, and a bar capacity of 75 mm. The machine offers a maximum turning diameter of 380 mm and a length of 1050 mm. It includes a programmable hydraulic tailstock, C-axis, Y-axis, and an OSP P200-L control for enhanced precision. If you are looking to get high-quality turning capabilities, consider the Okuma LU 300 MY machine we have for sale. Contact us for more information. Additional equipment • Renishaw tool probe • USB, PCMCIA, and RS232 ports • Chip conveyor (hinged belt type) • Tool load monitoring and effort control • Dual pedal for chuck and tailstock operation Nwedpfx Aeyaiqwoh Hob • Fully equipped with static and live toolholders Machine Benefits Technical Machine Benefits • Torque (main spindle): 620 nm • Spindle nose: a2-8 • Bar capacity: 75 mm • Chuck size: 250 mm (smw autoblok, quick jaw change) • Live tool speed: 4000 rpm • Live tool motor: 5. 5 kw • C-axis and y-axis: yes • Guideways: box-type (prismatic) on all axes • (upper turret with 12 live stations; lower turret with 8 positions) • Table indexing time (turret): 0. 2 seconds Extra Information Workpiece Max Turning Diameter: 380 mm Max Swing Diameter: 520 mm Max Turning Length: 1050 mm

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine No. 1-004/2581 Year of manufacture: 1984 Center distance: 1000 mm Swing over bed: 420 mm Center height over bed: 210 mm Swing over cross slide: 220 mm Center height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 Size 6, 4x M12 Tailstock taper: MT 4 Motor power: 5.5 kW Power supply: 380 Volts, 50 Hz - Spindle speed selectable across 12 geared steps - 3-jaw scroll chuck AROWA Ø 200 mm (only one set of jaws) - Multifix size B quick-change toolholder, with 3 tool cartridges - Automatic longitudinal and face feed - Coolant system - Spindle brake - Emergency stop - Splash guard Njdpsyah Rvefx Ah Howb - Fixed steady rest Ø 160 mm - Machine lamp - Operating manual Dimensions (L x W x H): 2200 x 1200 x 1450 mm Weight: 1500 kg Very good condition

Condition: used, Year of construction: 2016, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2016 Control : Heidenhain TNC 640 Speed : 12000 rpm Movement X/Y/Z : 400/350/350 mm Nwodpfx Asyad A Ijh Hsb Spindle: Technology:Directdrive Speed:12.000 rpm Power (max.):13 kW Torque (max.):95 Nm Taper:SK40 NC-Swivelroundtable: B-Axis:-50°/+110° C-Axis:360° Clampingsurface:ø450 mm Tableloading (max.):200 kg In general: Toolmagazine:48 Stations Rapid travers in X/Y/Z:48 m/min Equipment/Accessory: Positionsensor:Direct Scales in X/Y/Z Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with filter and High-pressure, 30 bar Workpiecemeasurement:Touch probe, Heidenhain TS740 Toolmeasurement:Laser, Renishaw NC4 TX Setup operations:Electronic Handwheel Further Equipment:Spindlechiller Further Accessory:Misc. used Toolholder

Condition: good (used), functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, quill stroke: 60 mm, spindle speed (max.): 400 rpm, spindle speed (min.): 1 rpm, spindle mount: MK 4, table length: 700 mm, table width: 425 mm, total height: 2,000 mm, total length: 2,000 mm, total width: 2,000 mm, rotational speed (max.): 4,000 rpm, overall weight: 2,000 kg, Equipment: rotational speed infinitely variable, X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Table size: 700 x 425 mm Nedpsyac Hlofx Ah Hewb Spindle nose: SK 40 Spindle speeds: 1 - 4000 rpm Spindle stroke: 60 mm Featured with: - ISO toolholders - Cooling unit - User Manuals Country of origin: Germany Motor power: 5 kW Machine LxWxH: 200 x 200 x 200 cm Machine weight: 2000 kg

Condition: like new (used), Year of construction: 2015, operating hours: 348 h, functionality: fully functional, machine/vehicle number: 647273, overall weight: 3,500 kg, load capacity: 150 kg, arm reach: 3,095 mm, pivoting range: 360 °, controller manufacturer: KUKA, controller model: KRC4, teach pendant manufacturer: KUKA, teach pendant model: SmartPAD, control cabinet width: 800 mm, control cabinet height: 2,000 mm, input voltage: 400 V, input current: 32 A, type of input current: three-phase, repeat accuracy: 0.06 mm, Equipment: documentation/manual, KUKA Robotic Machining Solution For large workpieces and complex geometries Ideal for sculpting, 5-axis machining, and prototyping Ready to use – like new condition Location: Industrial zone 06510 CARROS KUKA KR 150 R3100 prime (KR QUANTEC) – 2015 – 348 hrs • KRC4 controller + Hiteco spindle 9 kW / 24,000 rpm (HSK63F) • 1-axis positioner – TS35.30 tool setter • Integrated air (compressor + dryer + tank) • Tooling included (toolholders + ER40 collets) Fully integrated robotic cell, currently used for robotic machining and sculpting. The complete unit is in like-new condition, very lightly used, maintained by KUKA and an external service provider. ROBOT Brand / Model: KUKA KR 150 R3100 prime Series: KR QUANTEC Axes: 6 Payload: 150 kg Reach: 3095 mm Weight: 1114 kg Year: 11 / 2015 Serial No.: 647273 Operating hours: 348 hrs SOFTWARE Original KUKA software included: KRC V8.3.22 - Build 147 Installed options: Remote Service V1.1.1 – Build 7 BoardPackage V1.1.1 – Build 8 CAM/programming software not included (RoboDK, SprutCAM, PowerMill Robot, etc.) MILLING SPINDLE Brand: HITECO Model: QE-1F 8/12 24 63F NL CB Power: 9 kW Max speed: 24,000 rpm Tool holder: HSK 63F Cooling: Air IP rating: IP55 Inverter: Energy (dedicated cabinet) CONTROLLER KUKA KRC4 – Year 2015 (Week 45) Serial No.: 273942 Power supply: Three-phase 3 × 400 V – 50/60 Hz Robot-to-cabinet cable: 7 m CABINETS & ELECTRICITY 2 complete cabinets: KRC4 cabinet Additional power cabinet (safety + spindle) Energy Cabinet (2016) 400 V – 80 A – IP55 – EN 61439 COMPRESSED AIR Mauguière compressor Njdpfx Aoych Hvoh Hewb Air dryer Tank Integrated autonomous system TOOLING & ACCESSORIES INCLUDED 6 toolholders + 1 on the machine – 7 toolholders total 22 ER40 collets Tool change station TS35.30 tool setter Turntable Connections, cables, SmartPAD Complete mobile steel platform

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details measuring range X-axis 400 mm measuring range Y-axis 400 mm diameter max. 350 mm weight of the machine ca. 420 kg dimensions of the machine ca. 1,23 x 0,75 x 1,91 m Additional information Used Tool Presetter in very good condition. Checked by a service engineer from SPERONI. Nwedpfx Ahox Uyl Nj Hob Test report available. Automatic measuring Pneumatically Activated Axis Movement Spindle Disk Brake Camera CCD LCD Monitor 22" Label Printer DYMO 1 off toolholder for HSK 32 Other tool holders in other sizes are available from the manufacturer. Axis Resolution 1µ Software: Speroni Pro Vision PC DELL Optiplex GX 745 – Pentium Dual-Core CPU E 5200 / 2,50 GHz, 1,00 GB RAM (PC was changed approx. 5 years ago) Optionally, the following adapter can be obtained from the manufacturer: ISO 40 holder HSK 63 A/C holder

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: LVM50GIRJA/02115, MACHINE SPECIFICATION Height of centres 170mm Swing over bed 350mm Swing over cross slide 196mm Swing in gap 535mm Width front of faceplate 165mm Bed length between centres 1250mm Spindle speeds (infinitely variable) 15-3250rpm Spindle nose mounting (Camlock) D1-4 Spindle Bore 42mm Spindle motor 7.5Kw Width over bedways 318mm Nwodpsycg Thsfx Ah Hjb Travel cross slide 250mm Travel top slide 100mm Travel tailstock barrel 145mm Taper in tailstock barrel No. 4MT Machine in Imperial execution MACHINE EQUIPPED WITH Newall DP700 2 axis DRO system 3 jaw chuck Quick change toolpost and 3 toolholders Bedstop Lighting Chuck guard Coolant system Rear splashguard

Condition: excellent (used), Year of construction: 2019, operating hours: 3,140 h, functionality: fully functional, machine/vehicle number: 1162456, Specification Table size 1016mm x 356mm X axis traverse 508mm Y axis traverse 406mm Z axis traverse 356mm Spindle BT40 Spindle speeds 0-15,000rpm Nsdpfxsycf S Ao Ah Hjwb Spindle motor 11.2kW Rapid feed rate 30.5m/min Toolchanger capacity 20 Tools Approximate weight 2313Kg   MACHINE EQUIPPED WITH:- Haas CNC control Swarf auger Wireless intuitive probing system 12 off BT40 toolholders High speed machining User definable macros Visual part programming system 4th and 5th axis interface (interface only, no 4th or 5th axis) High flow coolant system Lighting Enclosed guarding Manual Power on hours 3140 Cycle start hours 1519 Feed cutting hours 1149

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Gildemeister NEF 320 CNC teach-in lathe Heidenhain Manual Plus Year of manufacture: 2000 Machine hours: 21,594 Max. turning diameter over bed: 320 mm Nwjdpfxeycf Rxs Ah Hob Max. turning diameter over cross slide: 150 mm Max. turning length between centers: 750 mm Max. spindle bore: 50 mm Motor power: 9 kW Spindle speed: 10–4,000 rpm Chuck: Rota-S Plus Multifix quick-change toolholder system Documentation and accessories Machine is powered up for inspection

Condition: reconditioned (used), Year of construction: 1956, Lead and Feed Screw Lathe WEIPERT Year of manufacture: 1956 Spindle bore: 90 mm Centre distance: 3000 mm Swing over bed: 800 mm Swing over cross slide: 610 mm Swing in gap: 1120 mm Speed range: 7.5 – 475 rpm Comes with the following accessories: Multifix toolholder with 11 inserts Coolant system 3-jaw chuck 315 mm 3-jaw chuck 400 mm 3-jaw chuck 500 mm Faceplate 400 mm Faceplate 800 mm Faceplate 1000 mm Travelling steady Nodpfew Ew D Dsx Ah Howb Various turning tools (30 insert tools) 2 revolving centres 1 drill chuck Operating manual

Condition: refurbished (used), Year of construction: 2002, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: 350523, Equipment: CE marking, Voltage: 380V Net weight: 1400 kg Customs tariff number: 8458.1120 Dimensions: 180x128x172 cm TECHNICAL SPECIFICATIONS CAPACITIES Maximum turning diameter: 270 mm Maximum diameter above cross slide: 115 mm Height of center above cross slide: 60 mm Turning length B32: 265 mm Center height above floor: 1,162 mm SPINDLE A2-4 / Camlock D1-3’’ Spindle for Schaublin collets: Hainbuch / F38 / B32 Spindle speed: 50–5,000 rpm AC motor drive: continuous/intermittent power: 5.5 / 7.5 kW AC motor drive: continuous/intermittent torque: 42 / 58 Nm Spindle bore (without clamping key): 39 mm Maximum bar capacity with collet: 32 mm Maximum bar capacity with automatic chuck: 32 mm PNEUMATIC CLAMPING Nsdpfjx Upugex Ah Hjwb Adjustable axial clamping force, force at 5 bars: 1,150 daN CROSS SLIDE Cross travel, X-axis: 190 mm Resolution, X-axis (radius): 0.0005 mm AC motor drive: continuous/intermittent torque: 4 / 14 Nm Ball screw, diameter x pitch: Ø 20 x 5 mm Longitudinal travel, Z-axis: 390 mm Resolution, Z-axis: 0.001 mm AC motor drive: continuous/intermittent torque: 4 / 14 Nm Ball screw, diameter x pitch: Ø 32 x 5 mm FEED RATES Working feed rates, X and Z axes, stepless: 0–5 m/min Rapid traverse, X and Z axes: 8 m/min TURRET TOOL SYSTEM Standardized toolholder mounting: VDI 20 Number of fixed/tool stations: 8 / - Maximum tool section: 16x16 mm Integrated coolant and bi-directional indexing: yes COOLANT SYSTEM Tank capacity: 55 L Pump flow rate: 10 L/min Pump pressure: 1.7 bar PNEUMATIC TAILSTOCK Quill taper: MT3 Outside diameter of quill: 45 mm Quill stroke: 70 mm Adjustable tailstock pressure: 25–260 daN Subject to errors or omissions, all technical details are provided without commitment. Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts checked and/or replaced Headstock Disassembly, parts cleaning, replacement of worn and defective parts, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, adjustment. New paint. Turret Disassembly, cleaning, replacement of worn/defective parts. New paint and face resurfacing. Tailstock Disassembled, inspected, and serviced. New paint. Hydraulic and pneumatic circuits Disassembled, motor inspected, hoses, defective and worn parts replaced. X-Axis Disassembly, replacement of worn parts such as O-rings, seals, rings. New ball screw and new sliding block. Z-Axis Disassembly, replacement of worn parts such as O-rings, seals, rings. New ball screw and new sliding block. Electrical cabinet Complete inspection, various relays replaced. Paintwork Colors: White RAL 9003 and grey RAL 7011 Geometry according to manufacturer's protocol. Various accessories checked and cleaned Year: 2002

Condition: ready for operation (used), travel distance Z-axis: 600 mm, feed length X-axis: 900 mm, feed length Y-axis: 900 mm, controller manufacturer: Siemens Sinumerik 840D SL, total height: 3,415 mm, total length: 4,655 mm, total width: 5,890 mm, empty load weight: 16,500 kg, rotational speed of tool magazine (max.): 40,000 rpm, Type: XCEEDER 900/RT XCEEDER is een 5-assig geïnterpoleerd bewegend bewerkingscentrum voor hogesnelheidsfreesbewerkingen. Speciaal ontworpen voor toepassingen van complexe tandwielen en waaiers tot mallen, matrijzen en gereedschappen, voor projecten in de lucht- en ruimtevaart, automobielindustrie en energieopwekking. - Maximale werkstukdiameter: 900 mm - Maximale afstand tussen spindel en tafel: 700 mm - Hydraulische klemming op tafel Nsdpfx Ajx Twa Ioh Hewb - A-as: -30° / 110° - C-as: continu - max. koppel op de spindel: 18/16 Nm - Gereedschapswisselaar met 150 posities Opties die op deze machine worden gemonteerd: 1 - 40.000 tpm hogesnelheidsspindel 2 - tafel dia 700 mm met hydraulische klemming Gereedschapswisselaar met 3-150 posities 4 - spaantransportband 5 - koelsysteem met terugwinning 6 - Koelvloeistoftemperatuurregeling 7 - hoge drukkoeling (40 tot 70 bar) deurspindel 8 - rookafzuigsysteem 9 - chipverzamelbox 10 - Voorinstellingssysteem en gereedschapintegriteit: laser- en mechanische taster voor meetgereedschappen 11 - Renishaw-meetkop Veel van de voordelen van de XCEEDER komen voort uit de kern van zijn structuur. Van een opmerkelijke winstmakerij, via het gietijzeren portaal, van alle trillende eigenschappen van "Metalquartz", Bretons gepatenteerde materiaal. Dit materiaal biedt een thermische inertie en is een effectief bestanddeel tegen bewerkingen, wat resulteert in zeer nauwkeurige en onverwachte reacties op het bewerkingsproces. Table dimensions: dia 700 mm Max weight on the table: 1000 kg Admission in spindle (ISO): HSK-E40 Power on the spindle: 45/40 kW Number of axes: 5 AXIS simultaneous Toolchanger: yes Number of toolholders: 150 positions

Condition: good (used), Year of construction: 1996, Control: OSP 700M Travel X/Y/Z: 1050 x 560 x 450 mm Table size: 1300 x 560 mm Spindle speed: 6,000 rpm Tool magazine for 20 tools, BT 50 Nwjdox Tvgaepfx Ah Hob Chip conveyor Approx. 40 toolholders BT 50

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, turning diameter over cross slide: 710 mm, turning length: 2,000 mm, turning diameter: 1,000 mm, spindle bore: 128 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 2 m/min, rotational speed (min.): 6 rpm, rotational speed (max.): 1,600 rpm, total height: 2,250 mm, total length: 5,800 mm, total width: 2,005 mm, quill travel distance: 280 mm, quill diameter: 125 mm, swing diameter over cross slide: 710 mm, torque: 4,260 Nm, overall weight: 10,100 kg, Equipment: documentation/manual, - Swing diameter over bed: 1000 mm - Swing diameter over cross slide: 710 mm - Feed rate in X, Z axes: 0.01–50 mm/rev - Feed speed in X/Z axes: 5/2.5 m/min - Rapid traverse in X/Z axes: 10/5 m/min - Feed force in X/Z axes: 20,000/12,500 N Nwedpfx Aeya Dz Djh Hob - Constant cutting speed: 1–9999 m/min - Distance between centers: 3300 mm - Faceplate diameter: 900 mm - 3-jaw chuck diameter: 500 mm - Bed width: 560 mm - Cross slide travel: 540 mm - Top slide travel: 250 mm - Metric thread pitch: 0.1–400 mm - Spindle nose: KK 11 DIN 55027 - Number of motor gear stages: 2 - Spindle speed range (first gear): 6.3–360 rpm - Spindle speed range (second gear): 28–1600 rpm - Spindle bearing diameter (front): 170 mm - Spindle bore diameter: 128 mm - Spindle internal taper: 136 metric - Tailstock quill diameter: 125 mm - Tailstock quill stroke: 280 mm - Tailstock quill internal taper: Morse 6 (MK6) - Cross slide dimensions (L x W): 1005 x 320 mm - Top slide width: 200 mm - Tool cross-section per DIN 770: 40 x 25 mm - Main drive power (60%/100% duty): 46/37 kW - Main drive torque (60%/100% duty): 5300/4260 Nm - Total power requirement: 60 kVA - Power supply: 400 V - Control cabinet dimensions (L x W x H): 1800 x 500 x 1600 mm - Machine dimensions (L x W x H): 5800 x 2005 x 2250 mm - Machine weight: approx. 10,100 kg CNC controller: SIEMENS SINUMERIK - Toolholder: MULTIFIX type D - AC servo drives - Reliable stepless AC main drive - Work area lighting

Condition: as good as new (ex-display), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 0153, Specification Europa VS660 Centre height 330mm Distance between centres 1500mm Swing over bed 660mm Swing over cross slide 430mm Nwsdonxi H Uepfx Ah Hsb Spindle bore (max. bar dia) 104mm Spindle nose mounting D1-11 Camlock Taper in spindle bore No. 7 Morse Swing in gap 860mm Width of bedways 480mm Total travel of cross slide 390mm Total travel of top slide 190mm Total travel of tailstock barrel 300mm Spindle speeds (infinitely variable) 18 – 1400rpm Drive vee belt and clutches Spindle motor 20HP Imperial pitches (73) 2-84TPI Diametral pitches (27) 8-72DP Metric pitches (51) 0.2 – 14mm Module pitches (20) 0.2 –3.5 MOD Approx. weight 3800 kg Machine in Imperial execution Europa VS660 Gap Bed Centre Lathe in stock in the UK Machine equipped with Fagor 2 axis DRO system with CSS ( Metric and imperial read out options) 3 jaw chuck Quick change toolpost and toolholders Rapid power traverse to saddle lighting Coolant system Chuck guard Rear splash guard

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Okuma LB 3000 MY. * Included equipment value: 20,000–24,000 euros. * 4-axis machine. * Fully independent tailstock, programmable in Z-axis movement and locking via M codes. * 12-station turret, all stations live (motorized). * C-axis. * Y-axis. * Main spindle with built-in motor, 18.5 / 22 kW. * Motor for driven tools: 5.5 kW. * Spindle start-up torque: 620 N·m. * Integrated motor, direct drive without belts or gear steps. * Main spindle nose: A2-8. Nwsdsyaxmbepfx Ah Heb * Tailstock Morse taper: MT5. * Bar capacity: 75 mm. * Spindle chuck: Kitagawa B-210. * Hardened box ways on all axes. * Main spindle speed: 4,200 rpm. * Driven tool speed: 4,000 rpm. * Swing diameter: 520 mm. * Max turned diameter: 380 mm. * Max turning length: 1,050 mm. * Headstock oil chiller. * IGF OSP P200-L conversational automatic programming system. * Automatic load monitoring and tool consumption monitoring. * Parameterized automatic tool collision avoidance system. * Tool life management and monitoring system. * Rapid traverse speed: 20 and 25 m/min on X and Z axes. * Turret index time: 0.2 seconds. * Renishaw automatic tool measurement arm. * Communication ports: USB, PCMCIA card, and RS 232. * Dual pedal for main chuck and tailstock open/close. * Side chip conveyor, hinged type. * Complete set of external and internal static toolholders. * Complete set of axial and radial driven toolholders. * Electrical transformer. * Documentation: parts list, electrical diagrams, programming, and operation manuals. * Weight: 6,200 kg. * Machine currently in operation. * Immediate delivery subject to prior sale.

Condition: used, Year of construction: 2014, Technical details: turning diameter: 256 mm turning length: 455 mm swing diameter over slide rest: 260 mm travel -x axis: 198 mm travel -z axis: 508 mm turning speed range - main spindle: 4800 1/min power capacity - main spindel: 18 / 11 kW C-Axis: 0,01 ° turret (x-stations): 12 x VDI 30 Pos rapid power traverse in X-and Z direction: 19 / 24 m/min Nwodpjx Th Amsfx Ah Hob Number of driven tools: 12 Pos tool taper: VDI 30 Spindle speed driven tools: 5000 min -1 spindle hollow: 52 mm power capacity - driven tools: 4,4 kW total power requirement: 28 kVA weight of the machine ca.: 4.500 kg dimensions of the machine ca.: 2,9 x 2,3 x 2,2 m CNC lathe with tailstock, chipconveyor, hollow clamping cylinder, 3-jaw-chuck AUTO STRONG N 208, dia. 200mm, DXF, tooleye, Ultipockets, Synchronous threading, 3D Graphic, barloader ILS-BREUNING MUK 7012-III, Bj. 2017, accessories: incl. 2 pcs. live tools, incl. 34 pcs standard toolholders, hour meter: approx. 9.500h "machine on", approx. 2.000h "spindle on", approx. 300h "live tools on" *

Condition: excellent (used), functionality: fully functional, Emcomat 17D Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C New from Training Workshop Excellent Condition!!! Technical Data: >> Year of manufacture: approx. 2000 >> Machine no.: D3F H1 010 >> Centre height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges, stepless from 35 to 3000 rpm >> Tailstock quill stroke: 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 – 0.787 mm/rev Nsdswvuf Tjpfx Ah Hswb >> 20 cross feeds: 0.023 – 0.406 mm/rev >> Required floor space approx. (L x D x H): 1.600 x 0.9 x 1.3 meters >> Weight: approx. 730 kg Equipment and Accessories: >> 3-axis digital readout from K&C, new, with 12 months manufacturer’s warranty and operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 piece three-jaw chuck NEW 160 mm, 2 sets of jaws >> Multifix B toolholder with 2 tool pockets >> Chip guard >> Coolant system About the machine: Offered here is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in very good condition. The machine is of course fully functional. The bedways are in excellent condition. The Emco is equipped with a new 3-axis digital readout from K&C and a new three-jaw chuck. Take the opportunity to inspect the machine under power on site and see the condition for yourself.

Condition: excellent (used), • Original ZÜRN milling toolholder, Germany • Type: SK40 – TC40x06x100-AD (DIN 69871) • High manufacturing precision, balanced for CNC operation • Tool shank Ø6 mm, length 100 mm • Robust design – Made in Germany • Very good condition, ready for use Nwodpfx Aexcx Sujh Hob

Condition: excellent (used), For sale: professional ORION milling toolholder – German quality and precision. • Type SK40 Ø10-100 (Weldon) • Standard DIN 69871 AD/B – spindle-through coolant • Total length 100 mm • Tool clamping for Ø10 mm (side screw) • Includes tool – milling cutter / drill bit (visible in photo) • Very good condition, used, fully functional. ORION toolholders are an ideal solution for CNC machining centres and milling machines with SK40 taper. Nwsdpfx Aoxcgytoh Hob

Condition: used, Year of construction: 2022, Optimum Optiturn TH5620V – Lathe with DPA and SWH Signs of use present • Hardened and ground Z-axis guideway • Spindle mount: Camlock DIN ISO 702-2 No. 8 • Precisely machined carriage • Handwheels with adjustable fine graduation 0.04 / 0.02 mm • All guides adjustable via gib strips • Shafts, gears, and main spindle running in oil bath • Compound slide adjustment range ± 90° • Guaranteed spindle nose runout accuracy better than 0.015 mm • Gear wheels move smoothly, hardened and ground, mounted with 2 adjustable precision tapered roller bearings • Clearly arranged selector levers for feed speed selection • Enclosed rapid-shift feed gearbox design • Gears and shafts hardened and ground, running in oil bath on precision bearings • Switches with lifecycle calculation, tested according to EN ISO 13849 • Bed carriage with reversible operation via shift spindle • Centralized lubrication on bed carriage • Leadscrew cover • Emergency stop pushbutton, motor protection switch, lockable main switch • Tailstock quill and handwheel with adjustable fine graduation 0.025 mm • Fast, simple, tool-free adjustment via clamping lever • Heavily ribbed prism bed, inductively hardened and precision-ground from cast iron • Coolant system with separate coolant tank, fill level indicator and oil separator; easy and complete draining and cleaning according to DIN • LED machine lamp in chip guard • Two gearbox stages • Spindle bore / bar capacity Ø 105 mm • Siemens Sinamics frequency converter / Safety Integrated • Drag chain for gentle routing of cables and hoses • Thread dial gauge scale adjustable • Quick-change toolholder SWH 7-C • 1 toolholder 32 x 150 Type D for 25 mm square tool bits • Digital position display DPA 21 • Glass scales Dimensions and Weight Length approx. 3450 mm Width/depth approx. 1150 mm Height approx. 1650 mm Weight approx. 2560 kg Working Range Centre height: 280 mm Centre distance: 1910 mm Swing over bed: 560 mm Swing in bed gap: 790 mm Swing over cross slide: 355 mm Turning length in bed gap: 170 mm Bed width: 350 mm Speed range Number of speed ranges: 2 Speed range: 25 – 1600 rpm Speed control: electronically adjustable Electrical Data Output power (motor): 7.5 kW Total power rating: 8.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Coolant System Coolant pump capacity: 125 W Standards and Approvals Standard: DIN EN 55011 Tailstock Mount: MK 5 Quill travel: 180 mm Quill diameter: 75 mm Max. toolholder seat height: 25 mm Spindle taper: Ø 113 (Taper 1:20) mm Metric thread pitches: 0.1–14 mm/rev Njdpfsx Dzxasx Ah Hswb Number of metric threads: 47 Imperial thread pitches: 112–2 TPI Number of imperial threads: 60 Diametral pitch: 4–112 DPI Number of diametral pitch threads: 50 Module threads: 0.1–7 mm/rev Number of module threads: 34 Compound slide travel: 130 mm Cross slide travel: 316 mm Bed carriage travel: 1710 mm Longitudinal feed range: 0.031–1.7 mm/rev Number of longitudinal feeds: 42 Face feed range: 0.014–0.784 mm/rev Number of face feeds: 42

Condition: used, _____ Description: Year of manuf. : 2022 Control : Fanuc 0i-TF Turning diam. : 580 mm Turning length : 3250 mm Mainspindle: Technology:Belt-driven spindle with Gearbox Speed:1.000 rpm Power (max.):45 kW Torque (max.):4.008 Nm Barcapacity:205 mm Nsdpswt Iwqefx Ah Hjwb Workpiececlamping I:3-Jaw chuck, Autogrip AP-230 ø535 mm Workpiececlamping II:Manual 3-Jaw chuck, Chandox SK20 (Rearside Spindlehead) Toolcarrier (X/Y/Z): Technology:Turret with 12 stations Taper:BMT 75 Tooldrive:3.000 rpm, 7 kW, 83 Nm Movement in X/Y/Z:340/160/3.250 mm Rapid travers in X/Y/Z:20/7/12 m/min Tailstock: Technology:Towed tailstock with programmable Sleeve Stroke:150 mm Cone:MK5 Equipment/Accessory: Chipmanagement:Chipconveyor Coolingmanagement:Coolant pump Toolmeasurement:Measuringarm, Renishaw RP3 Oilmistseparation:Mechanical extraction, AR Filtrazioni ARNO 3VF YF Shaftprocessing:Manual Steady rest, ø150-300 mm Toolholder:Misc. static and driven toolholder Setup operations:Electronic Handwheel Further Equipment:Automatic Door (pneumatic), Trafo, Oilskimmer Further Accessory:Misc. Jaws and EWS Quickchangeinserts

Condition: used, Year of construction: 2013, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2013 Control : Siemens 840Dsl Turning diam. : 430 mm Turning length : 744 mm Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):29 kW Torque (max.):250 Nm Barcapacity:65 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop nova Kombi Axzug Gr. 65 Subspindle: Technology:Motorspindle Speed:7.000 rpm Power (max.):22 kW Torque (max.):130 Nm Workpiececlamping:3-Jaw chuck, SMW Autoblok KNCS-N-225-66 Ejector:Pneumatic Movement in Z:750 mm Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Y/Z:270/100/750 mm Eilgang in X/Y/Z:24/10/30 m/min Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Z:205/750 mm Eilgang in X/Z:24/30 m/min Equipment/Accessory: Nodpfx Ahew Tg Ado Hewb Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pumps with High-pressure, 14 bar Rawmaterialfeed:Barloader, EMCO LM 1200 Finishedpartremoval:Workpiece unloading device (pneumatic) with conveyor belt Oilmistseparation:Mechanical extraction, Absolent Toolholder:Misc. static and driven toolholder Further Accessory:Spindlechiller