Used Toolholder for sale (265)

Condition: excellent (used), Year of construction: 2000, Dreh-Øüber Bett 320 mm Dreh-Øüber Support 185 mm turning length 1000 mm Bodotv Iibopfx Adrjdd Spindelbohrungs -Ø/ Aufnahme 32 mm mm spindle turning speed range (12) 85 - 2000 U/min feeds - longitudinal 0,006 - 1,77 mm/min feeds - cross 0,003 - 0,888 mm/min thread - mm pitch 0,1 - 28 mm thread - module 0,1 - 1,75 mm thread - inch 2,5 - 75 inch. voltage 400 V / 50 Hz power capacity 2,2 kW weight of the machine ca. 0.8 t dimensions of the machine ca. 1,8 x 0,8 x 1,4 m Quick-change toolholder with 5 cassettes, fixed steady, 3-jaw chuck Ø 200 mm, coolant device,

Year of construction: 1997, condition: good (used), Ibarmia CNC machining center offered. Type: ZVL 3000 Control unit: Heidenhain TNC 426 CB X-travel: 2200 mm Y-travel: 800 mm Z-travel: 600/800 mm Table: 850 x 2600 mm Weight on table max: 3500 KG Spindle: SK 40 with cooling Speed max: 4000 RPM Toolchanger: 40 pieces Power: 47 KW Included: documentation, parameters, toolholders, chip conveyor and central lubrication system Year: 1997 Dimensions: 625x305x340 cm LxWxH Weight: ca 12000 KG Bsdpoh Hp Unsfx Adrsdd Movie available! For more information call us or send an e-mail.

Condition: good (used), Year of construction: 1988, 1 used lead and feed screw lathe Make: Weiler Model: 160 B Year of manufacture: 1988 Technical specifications Centre distance: 650 mm Swing over bed: 320 mm Swing over cross slide: 192 mm Centre height: 160 mm Spindle bore: 40 mm Rated power: 2.4 / 3 kW Spindle speeds: 48 – 2500 rpm Dimensions: approx. L 2.20 x W 1.10 x H 1.40 m Weight: approx. 1 t Bodpfow Sdr Hsx Adredd Equipment Heidenhain digital readout Multifix toolholder with various inserts 3-jaw chuck Emergency stop

Condition: good (used), 1 used lead and feed screw lathe Make: Weiler Model: Condor VS 2 Technical Data: Centre height: 160 mm Centre distance: 800 mm Spindle bore: 40 mm Bed width: 240 mm Speeds: 12 - 2800 rpm Bodpow Rcrcjfx Adrodd Drive power: 3 kW Tailstock taper: MK 3 Quill stroke: 110 mm Feeds: 0.037 - 1.253 mm/rev Weight, approx.: 800 kg Dimensions (W x D x H), approx.: 1930 x 880 x 1470 mm Equipment: 3-jaw chuck Quick-change toolholder system Multifix

Condition: new, neu Bulgarien 58370 € 1103.19 € 600 mm 2000 mm 0 mm 80 mm 400 mm 400 mm 8 90 MK 3 20 - 100; 80 - 400; 400 - U/Min 120 64 0.5 - 120 mm 60 - 1/4 Gänge/" 315 mm 1 mm 90 mm 5 MK 2 mm 11 kW 3600 mm 1500 mm 1650 mm 3110 kg In contrast to the universal lathes, here the adjustment of the revolutions is infinitely variable by means of a frequency inverter. It is possible to ensure a "constant cutting speed" (V-const), i.e. when changing the diameter to be machined, the speed remains unchanged and thus a higher accuracy and smoothness of the surface is achieved. At the customer's request, the machines can be manufactured with a reading of the linear displacement and positioning by mounting a digital display. driven by variable speed control (3 steps) 3-axes digital readout Fagor with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center main motor with frequency invertor four way rapid traverse device longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 54970,00 Bdsdoyq Stpjpfx Adrjd turning length1.500 mm € 56350,00 turning length3.000 mm € 62720,00 turning length4.000 mm € 685,00 turning length5.000 mm € 83910,00

Condition: new, neu Bulgarien 42910 € 819.58 € 400 mm 750 mm 200 mm 52 mm 235 mm 320 mm 6 6 MK 4 18-98; 48-265; 144-790; 3 U/Min 80 Bdjdpfxoyq Stio Adrsd 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 235 mm 110 mm 50 mm 4 MK 100 mm 7.5 kW 1530 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 43.630,-

Condition: new, neu Bdedoyq Stcspfx Adred Bulgarien 140320 € 2652.05 € 1320 mm 3000 mm 625 mm 155 mm 940 mm 700 mm 15 160 MK 4 3,7 - 15,6; 14,7 - 62; 58 U/Min 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 1/16 - 60 Gänge/" 685 mm 270 mm 125 mm 6 MK 260 mm 30 kW 8550 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 125460,00 turning length4.000 mm € 148950,00 turning lenght 5.000 mm € 160150,00 turning length6.000 mm € 177240,00

Condition: new, neu Bulgarien 133550 € 2524.1 € 1090 mm 3000 mm 500 mm 155 mm 690 mm 700 mm 15 160 MK 4 3,7 - 15,6; 14,7 - 62; 58 U/Min 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 240 525 mm 270 mm 125 mm 6 MK 260 mm 30 kW 8050 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 118510,00 turning length4.000 mm € 142090,00 Bdedpfsyq Sr Ssx Adred turning length5.000 mm € 153400,00 turning length6.000 mm € 170390,00

Condition: new, neu Bulgarien 126650 € 2393.69 € 890 mm 3000 mm 400 mm 155 mm 490 mm 700 mm 15 160 MK 4 3,7 - 15,6; 14,7 - 62; 58 U/Min 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 525 mm 270 mm 125 mm 6 MK 260 mm 30 kW 7500 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 111610,00 turning length2.000 mm € 115430,00 turning length4.000 mm € 135290,00 turning length5.000 mm € 146500,00 turning length6.000 mm Bsdpfxsyq Sq Uo Adrsdd € 163590,00

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 53250 € 1006.43 € 500 mm 1500 mm 250 mm 75 mm 0 mm 400 mm 8 80 MK 3 25-100; 100-400; 500-2000 U/Min 120 0.04 - 12 mm/U 0.02 - 6 mm/U 0.5 - 120 mm 60-1/4 Gänge/" 240-1 315 mm 1 mm 90 mm 5 MK 2 mm Bdsdpfx Aoyq Srfsdrjd 11 kW 3100 mm 1250 mm 1400 mm 2800 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 51870,00 turning length2.000 mm € 55170,00 turning length3.000 mm € 59620,00 turning length4.000 mm € 656,00 turning length5.000 mm € 81110,00

Condition: new, neu Bulgarien 89440 € 1690.42 € 760 mm 3000 mm 380 mm 132 mm 520 mm 560 mm 11 140 MK 3 7 - 42; 28 - 170; 165 - 1 U/Min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 410 mm 150 mm 105 mm 6 MK 225 mm 15 kW 4470 kg Bdedpfxsyq Sn Tj Adrjd driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.500 mm € 75340,00 turning length2.000 mm € 78380,00 turning length4.000 mm € 95860,00 turning length5.000 mm € 108730,00 turning length6.000 mm € 122800,00

Condition: new, neu Bulgarien 64180 € 1213 € 6 mm 2000 mm 315 mm 103 mm 4 mm 400 mm 11 120 MK 3 16 - 63; 63 - 250; 315 - U/Min 120 0.04 - 12 mm/U 0.02 - 6 mm/U 0.5 - 120 mm Gänge/" 315 mm 1 mm 90 mm 5 MK 2 mm 11 kW 3310 kg driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 60780,00 turning length1.500 mm € 62160,00 turning length3.000 mm € 686,00 turning length4.000 mm € 74540,00 Bedpfsyq Sm Nox Adrodd turning length5.000 mm € 90020,00

Condition: new, neu Bulgarien 26210 € 500.61 € 325 mm 750 mm 165 mm 32 mm 190 mm 200 mm 5 4,5 MK 2 85-405; 470-2200 U/Min 48 0.006 - 1.77 mm/U 0.003 - 0.885 mm/U 0.1 - 28 mm 0.1 - 1.75 70 - 4 150 mm 95 mm 40 mm 3 MK 100 mm 2.2 kW 2150 mm 950 mm 1350 mm 770 kg driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual Bdsdpoyq Sngofx Adrsd machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 26.730,-

Condition: new, neu Bulgarien 96240 € .94 € 860 mm 3000 mm 430 mm 135 mm 620 mm 560 mm 11 140 MK 7 - 42; 28 - 170; 165 - 1 U/Min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 240 435 mm 150 mm 105 mm 6 MK 225 mm 15 kW 4650 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection Bsdpfxsyq Sm Aj Adrjdd safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 82140,00 turning length2.000 mm € 85080,00 turning length4.000 mm € 102660,00 turning length5.000 mm € 115430,00 turning length6.000 mm € 129500,00

Condition: new, neu Bulgarien 114970 € 2172.93 € 890 mm 3000 mm 400 mm 155 mm 490 mm 700 mm 15 160 MK 24 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 525 mm 270 mm 125 mm 6 MK 260 mm 22 kW 7500 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual Bodpfx Adewirxqsredd machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 100,00 turning length2.000 mm € 103850,00 turning length4.000 mm € 123510,00 turning length5.000 mm € 134810,00 turning length6.000 mm € 151900,00

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 37910 € 724.08 € 400 mm 1000 mm 200 mm 52 mm 235 mm 320 mm 6 6 MK 12 50-2.240 1/min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 480 - 16 235 mm 110 mm 50 mm 4 MK 100 mm 4 kW 2750 mm 1100 mm 1600 mm 1540 kg driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultisuissewith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm Bdedpfx Adoxzuu Aered spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTH (PRICE ON REQUEST): turning length 750 mm

Condition: new, neu Bulgarien 56920 € 1075.79 € 6 mm 2000 mm 315 mm 103 mm 4 mm 400 mm 11 120 MK 21 12,5 - 1250 1/min 120 0.04 - 12 mm/U 0.02 - 6 mm/U 0.5 - 120 mm 60 - 1/4 Gänge/" 240 - 1 315 mm 90 mm 90 mm 5 MK 2 mm 11 kW 3310 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 53520,00 turning length1.500 mm € 54880,00 Bdedpfx Aewirv Ajdred turning length3.000 mm € 61360,00 turning length4.000 mm € 67270,00 turning length5.000 mm € 82750,00

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 86980 € 1643.92 € 860 mm 3000 mm 430 mm 132 mm 620 mm 560 mm 11 140 MK 17 7,5 - 1015 1/min 150 0.039 - mm/U Bdodpfx Adjwiq Rxerjd 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 240 - 2/3 435 mm 150 mm 105 mm 6 MK 225 mm 15 kW 3470 mm 1700 mm 1730 mm 4650 kg driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 72870,00 turning length2.000 mm € 75900,00 turning length4.000 mm € 93390,00 turning length5.000 mm € 106 160,00 turning length6.000 mm € 120230,00

Condition: new, neu Bulgarien 81780 € 15.64 € 760 mm 3000 mm 380 mm 132 mm 520 mm 560 mm 11 140 MK 17 7,5 - 1015 1/min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 410 mm 150 mm 105 mm 6 MK 225 mm 15 kW 4470 kg driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 67770,00 turning length2.000 mm € 70700,00 turning length4.000 mm € 88290,00 turning length5.000 mm € 101060,00 turning length6.000 mm € 115130,00 Bodpfx Adewiq Rrjrsdd

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 46970 € 897.13 € 500 mm 1500 mm 250 mm 80 mm 0 mm 400 mm 8 80 MK 21 20-2000 1/min 120 0.04 - 12 mm/U 0.02 - 6 mm/U 64 0.5 - 120 mm 60 - 1/4" Gänge/" 240 - 1 315 mm 1 mm 90 mm 5 MK 2 mm Bdedpswiq Rfefx Adrsd 7.5 kW 3100 mm 1250 mm 1400 mm 2820 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 45610,00 turning length2.000 mm € 49010,00 turning length3.000 mm € 53450,00 turning length4.000 mm € 59360,00 turning length5.000 mm € 74840,00

Condition: new, Year of construction: 2025, neu 2025 010105 prompt, Zwischenverkauf v Bulgarien 50210 € 948.97 € 1 600 mm 2000 mm 0 mm 80 mm 400 mm 400 mm 8 90 MK 21 20 - 2000 1/min Bdodpfxswiqz Do Adrod 120 0.04 - 12 mm/U 0.02 - 6 mm/U 64 0.5 - 120 mm 60 - 1/4 Gänge/" 315 mm 1 mm 90 mm 5 MK 2 mm 7.5 kW 3600 mm 1250 mm 1400 mm 3110 kg driven by conventional gearbox 3-axes digital readout Fagor 40i quick change toolpostAmestra Multisuisse type C with 4 holders (3 square, 1 round) 3-jaw chuck Bison3204/DIN6350, Ø 250 mm spindle dead center four way rapid traverse device electromagnetic brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS (PRICES ON REQUEST): turning length 1.000 mm turning length 1.500 mm turning length 3.000 mm turning length 4.000 mm turning length 5.000 mm

Condition: new, neu Bulgarien 128710 € 2432.62 € 1320 mm 3000 mm 625 mm 155 mm 940 mm 700 mm 15 160 MK 5 - 1000 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 685 mm Bodpfxswiqwfj Adredd 270 mm 125 mm 6 MK 260 mm 8550 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 113860,00 turning length 2.000 mm € 118510,00 turning length4.000 mm € 137250,00 turning length5.000 mm € 148550,00 turning length6.000 mm € 165640,00

Condition: new, neu Bulgarien 121770 € 2301.45 € 1090 mm 3000 mm 500 mm 155 mm 690 mm 700 mm 15 160 MK 24 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 525 mm 270 mm 125 mm 6 MK 260 mm 22 kW 7500 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS turning length1.500 mm € 107020,00 turning length2.000 mm € 110650,00 Bedpfx Ajwiqv Ujdrjdd turning length4.000 mm € 130410,00 turning length5.000 mm € 141610,00 turning length6.000 mm € 158700,00

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 161 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 580 mm, number of axes: 7, This 7-axis Nakamura Tome WY-250 was manufactured in 2007. It features a twin spindle configuration with Y-axis capabilities on both turrets, allowing for versatile machining. The machine includes a maximum Z-axis travel of 580 mm and Y-axis travel of mm. If you are looking to get high-quality turning capabilities, consider the Nakamura Tome WY-250 horizontal turning machine we have for sale. Contact us for further details. Bodpfsy N Spcex Adredd • Travels: • X1: 160.5 mm • X2: 165 mm • Z1/Z2: 580 mm • Y1: mm • Y2: / mm • Included tooling: • 4x external tool holders • 4x tool holders for simultaneous mounting of 2 opposite tools • 6x boring bar holders • Driven toolholders (HEIMATEC): • 4x radial • 4x axial • Collet holders (Bellegrandi): • Main spindle: MSCNT70-A6” for BA & BD collets size 70, complete with related cups • Counter spindle: MSCTNR70-A5” for BA collets size 70, complete with spring ejector Additional equipment • IEMCA Master 880/33/P bar feeder (2003), S/N: 0200347S03 • Application: Automatic bar feeder for CNC lathes • Capacity: • Max bar length: 3300 mm (to be confirmed) • Max bar diameter: up to Ø80 mm (model family reference) • Guide channels: Ø65 mm included; Ø70 mm currently installed and can be supplied with the machine • Features: Automatic loading/feeding, synchronization with lathe cycle, compatible with spindle liner/guide channel systems, heavy-duty frame • Note: Sold together with the Nakamura Tome WY-250; some accessories/guide channels may belong to the lathe setup • Complete set of hand jaws (“Manine”) for parts unloader (parts unloader itself not specified) Machine Condition / Technical Status- IMPORTANT The machine is currently being sold in its present technical condition and the seller will NOT carry out the repairs before sale. Main known issues / condition points: • Lower turret driven tooling function not working correctly • Air/oil lubrication system issues detected • Presence of rust inside the lower turret gearbox • Upper turret gearbox found filled with NBU15 grease although the system should operate with air/oil lubrication • Z1 axis linear guides/slides require replacement • Z2 axis linear guides/slides require replacement • Geometry deviations detected during machine inspection • Various spindle/brake/hydraulic cylinder run-out deviations measured • Several bearings, ball screws, seals, guide rollers, belts, lubrication components and wipers require replacement according to the attached spare parts listInspection highlights: • Machine geometry and spindle parallelism were measured and documented • Run-out values were detected on both spindles and hydraulic chuck systems • Multiple axis lubrication and protection components require maintenance/replacement • Detailed spare parts list availableIncluded documentation: • Technical inspection report • Geometry verification report • Spare parts/replacement list • Photos of damaged/worn componentsThe machine remains a highly equipped Nakamura Tome WY-250 Super Mill platform, but prospective buyers should consider the required repair and maintenance work when evaluating the machine. Technical inspection and spare parts documentation available upon request. Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: new, Year of construction: 2026, Universal Milling Machine UWF120 SERVO with Independent Spindle Drive: Exceptional Machining Flexibility Our Universal Milling Machine UWF120 SERVO is an innovative solution for a wide range of milling operations. Servo motors on the X, Y, and Z axes, along with an independent vertical spindle drive, enable precise milling at various angles. The handwheel for accurate tool positioning and smooth movement makes operation intuitive and efficient. Its solid and heavy-duty construction ensures stability even during demanding machining tasks, while guaranteeing long-lasting machine life. Machine characteristics The cast-iron body ensures vibration-free operation, contributing to high machining accuracy. Protective covers in accordance with the latest safety standards ensure safe operation. Schneider Electric electronics and SERVO drives guarantee not only machining precision but also operational safety. The digital display and ergonomic control panel make the milling machine easy and intuitive to operate. Technical data Maximum face milling cutter diameter 25 mm Table dimensions 1500x320 mm Table travel X/Y/Z 1000/320/340 mm Distance from spindle face to table 90–430 mm Distance from horizontal spindle axis to table –130 to 300 mm Distance from spindle axis to column 400–800 mm T-slot width, spacing, and number 14 mm / 70 mm / 3 pcs Spindle speeds 45–1660 (V–11) rpm 34–1320 (H–12) rpm Table feed 25–595 mm/min (8) Spindle taper ISO40 Bdedpjzfgf Uofx Adrod Supply voltage 400V Motor power 2.2kW (V); 3kW (H) Weight 2,100kg Overall dimensions (LxWxH) 1630x1700x1950 mm Standard equipment: 3-axis digital readout Servo drive ISO40 toolholder with ER32 collets 4, 5, 6, 8, 12, 14, 16 Reduction sleeve ISO40/MK4 Reduction sleeve ISO40/B16 Drill chuck 3–16 mm B16 Vice 160 Lighting Cooling system Central lubrication system Feed for X, Y, Z axes Tool set User manual CE Declaration of Conformity