Used Threading Device for sale (14,102)

Condition: used, Format: 0x0 Ppsdpfex Rcw Tjx Aalol Equipment: Linotype-Setzmaschine

Condition: as good as new (ex-display), centre height 130 mm spindle bore 18 mm Pedpfx Aasuvd Axjlspl ratio 40:1 swivellable - 10° bis 90° ° groove width 16 / 18 mm weight 35 kg dimensions of the machine ca. 0,5 x 0,25 x 0,25 m Unused semi-universal dividing set: - Spindle in precision tapered roller bearings - Phosphor bronze worm wheel, helix Cr-NI steel, hardened and ground - Translation disengageable for direct sharing - each division 2 to 50 and many divisions to 380 accessories: Tailstock, 2 part washers, centering point, driver and chuck flange Machine dealer with own stock of 1600 m².

Condition: new, Year of construction: 2012, welding current 20 - 100 A Ppedpfx Aow En E Esalsl cutting capacity max. 35mm mm open-circuit voltage 250 V Required air-pressure min. 4 bar connected load 20 KVA connected load frequency 400 V weight 0,7 kg Dimensions (LxWxH) 1,0 x 0,6 x 0,8 mm Plasma cutting machine with cart - Includes 7m hose package - Spare nozzles

Condition: good (used), Bosch Diffusion Welding Machine The system described here was designed for the following use: Diffusion welding machine for connecting the armature lead to the commutator of a starter armature using diffusion welding. Diffusion welding unit (also known as polymer diffusion welding unit, diffusion welding, copper soft welding unit, copper strip welding unit), consisting of a main machine and control system, PLC control, touchscreen operation. Process Description Ppodpsg Icfpsfx Aaljl The workpiece carrier enters the station and is lifted. The alignment gripper picks up the armature from the workpiece carrier and aligns it according to the welding position. The loading gripper picks up the armature and places it in the welding chuck. The welding chuck moves with the armature into the welding position. The contacting unit and welding cylinder move together, and the first weld is performed. This process is repeated until the armature is completely welded. The welding chuck moves with the anchor into the transfer position, and the unloading gripper picks up the anchor and places it on the raised workpiece carrier. The workpiece carrier is lowered. Workpiece carriers with OK anchors continue on the conveyor system; NIO anchors are sent to the removal conveyor. At a welding machine, the OK anchors are marked with a color on the end face of the commutators using a stamping station. This allows for identification during the final inspection of which welding machine produced the anchor. ... Technical Data: Diffusion Welding Machine Energy Data: Frequency: 50 Hz Rated Power: approx. 11 kW Operating Voltage: 400 V / 3P Control Voltage: 24 V Rated Current: 20 A Fuse: 35 A Water: Inlet pressure 4 bar, 15-23 °C, approx. 25 l/min Compressed Air, oil-free: min. 5 bar Temperature: 1000 °C at the tungsten electrodes Machine Dimensions without Control Cabinet Depth: 1800 mm Width: 3100 mm Height: 2700 mm Weight: 3000 kg Year of Manufacture: 2016 Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: good (used), Keyboard, control panel, industrial, PLC workstation, programming device Pedehyx Rkepfx Aalepl -Manufacturer: Siemens, programming device Simatic PG 605 with case -Type: Simatic PG 605U 6ES5 605-0UA12 -Dimensions case: 390/300/H90 mm -Total weight: 1.7 kg

Condition: used, 2 machines available Rolling pressure 160 kN Ø Parts 3mm min; Ø 50mm max Pitch 5.5mm max Flute pitch 2mm max Roll width 100mm max Roll Ø 133mm min; 165mm max Roller shafts speed 32 40 51 59 81 95 118 150 rpm Ø roller shaft Ø 54mm standard; 69.85mm special Distance between axles 135mm min; 205mm max Working stroke 15min max Feed rate from 0.5mm/s up to 6mm/s Rolling time from 0.1s to 100s Pause time 0.1s to 100s Inclination of roll-holding shafts +/- 5º. Main motor 5.5 Kw Ppodpfxeyftq Eo Aalel Power consumption 7 Kw Tank capacity 130 L Approx. weight 1700 Kg Accessories: thread rolls, 5 pairs for the 2 machines workpiece holders and guiding

Condition: good (used), Year of construction: 2021, machine/vehicle number: 27798, Double-column rotary positioner with lifting device Offer 25138 Pedpfx Aaew Smineljpl Technical data: - Max. load capacity per column 4000 kg - Total max. load capacity 7000 kg - Travel / lifting stroke 1780 mm - Lifting speed 1600 / 2800 mm/min - Rotational movement electrically adjustable - Right- and left-hand rotation - Drive 400 V - Space requirement for driven unit approx. W 1500 x H 3500 x D 1500 mm - Space requirement for idler unit W 1300 x H 3500 x D 1300 mm - Weight of driven unit approx. 4000 kg - Weight of idler unit approx. 2500 kg

Condition: good (used), Year of construction: 2017, Dust suction hood 250 mm Motor output 5,5 kW Dimensions (L/W/H) 2.650 x 1.030 x 2.500 mm Ppedpfxexzuxnj Aalsl

Condition: used, functionality: fully functional, thread length: 3,000 mm, WANDERER GF-34 CNC Thread Milling and Hobbing Machine 4-Axis GF 34 CNC Extruder Screw Milling Machine WANDERER 20 kW Thread and Hobbing Machine 4-axis milling system, universally applicable for machining: - Injection molding screws - Extruder screws - Special profiles and with additional milling heads: - Splined shafts - Straight gears - Long threads - Worm gears Ppodpfsyfk Dpsx Aalol

Condition: used, Format: Equipment: Speed: 4,300 cycles per hour Fold types: Letter, Single Fold, Zigzag Fold, Doub Job Memories: 20 Folding Capacity: 8 Sheets Document Feeder Capacity: 325 Sheets Maxi Feeder: 1,200 Sheets Envelope Capacity Hopper: 500 Envelopes Envelope Capacity Side Exit: 500 Envelopes Envelope Capacity Power Stacker: 500 Envelopes Set Thickness: 2.5mm Pedex N Ng Ejpfx Aalepl Reverse Reading: Yes Cascade Feeding from all Feeders: Yes High Capacity Power Stacker: Yes Dimensions: Depth: 460mm, Height: 920mm, Length: 1 Dimensions: Weight: 140 Kg (6 Stations)

Condition: used, * for hydraulic tools at maximum clamping length, * Thread: M44x1.5, * Right-hand thread. Price per piece: 60.00 € + VAT Available: 3 pieces. Podpfxelkcdvo Aaljpl

Condition: good (used), Year of construction: 2009, Handling device Sepro SR Access 22 S3 DB Touch 2 x = 650 mm y vert. = 1400mm Z = 1500 mm (+ C + A) R1, R2, year: 2009, Price: 9.900 Euro, Contact: Mr. Rainer Eckerle Podpfx Ajd S Iucjalepl

Condition: used, Precise angles and mitres from 0° to 46°, with digital display for angle indication Ppodpfx Aowhzg Usalsl Location: Nattheim

Condition: excellent (used), workpiece diameter 10 - 250 mm threading length 900 mm thread pitch 0,3 - 100 mm spindle turning speed range 72 / 1700 - 2540 U/min relief of the tap 0,03 - 8 mm clamping length max. 1190 mm Ppodpfxeyb S Ris Aaljl max. module 10 workpiece turning speeds 0,4 - 160 U/min total power requirement 13 kW weight of the machine ca. 7,4 t dimensions of the machine ca. 4,5 x 2,0 x 2,1 m Many accessories.

Condition: excellent (used), thread dia. 10 - 150 mm grinding length 900 mm thread pitch max. 3 mm Ppedpfx Aasyb S N Soljl workpiece diameter max. 260 / 340 mm threading length max. 50 mm centre distance 1200 mm centre height 1100 mm grinding wheel diameter 275 - 400 mm grinding wheel width 14/20/30/40/50 grinding head-swivable, cross 4 re / 1 li ° max. stroke of grinding wheel 140 mm peripheral speed max. 35 m/sec total power requirement 14 kW weight of the machine ca. 5,8 t dimensions of the machine ca. 5,0 x 2,0 x 2,1 m

Condition: used, Threading machine, pipe threader, Ridgid 300, used machine Manufacturer: Ridgid Type: 300 Overall dimensions: Width: 1180 mm Psdpfxoybbams Aalepl Depth: 1250 mm Height: 1500 mm Electrical data: 230V Functions: Thread cutting, cutting to length, deburring

Condition: good (used), Thread cutting machine, pipe thread cutter -Manufacturer: Rothenberger, Thread cutting machine type Supertronic 2SE without thread cutting head -Pipe size: 1/2 to 2 inches -Spindle bore: Ø 68 mm -Operating voltage: 230 volts -Speed: 40 rpm -Foot switch: with emergency stop function -Equipment: Pipe cutter, internal deburrer -Dimensions: 500/480/H370 mm Pjdpfxex I Agpj Aalopl -Weight: 46.6 kg

Condition: like new (used), Year of construction: 2022, Stierli- ROTATOR 600 / 6 to 360° turning device for fast and safe turning and rotating of beams, profiles and welding components. Use for welding, plastering, fast welding visual inspection, as assembly turning device etc.... Capacity: 6 tons Swing circle diameter: 600mm (e.g. beam HEB 600) Ppodpfx Asgqgb Ujaljl Length of parts: freely selectable (stands are freely positionable by means of hand pallet truck) Adjustment of working height: Steplessly adjustable The Stierli rotator was developed to turn heavy and large loads such as beams and welded constructions quickly and safely without a crane. This saves you a lot of working time and increases productivity. This welding positioner or welding manipulator works as a lifting turning device with reliable chains. The turning device is not only used for beam welding, but other cross sections can also be turned with it, such as the use as a pipe turning device. Loading is impressively simple with the overhead crane, or by means of forklift loading. The rotator can be brought into position very easily with the hand pallet truck, whereby the distance between the uprights of this welding device is freely selectable.

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Required scope of delivery for push-through protection: 01x U-profile, used Material color: sendzimir galvanized total length: approx. 2.765 mm profile dimension: C: 60x40x8 mm including 2 agraffes Further information: Shelving system: SSI Schäfer suitable f. clear width: approx. 2.700 mm 06x hexagon bolt: M8 x 35 mm 06x Toothed nut: M8 06x washers: M8 General information about the item: This item is offered for pickup only. Any additional transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading) Podpfjh Ekdfox Aaljpl

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 10-0162, PROLINER 10CS digital measuring device. Manufactured 2019. New battery and factory checks in 2024. Software version 4 (decking). Includes trípod, 10m cable, spare battery and charger, 2 remote controls, hard travel case and soft rucksack case. Ppodpoxz Ed Ujfx Aalel Price now 15,125€ including 21% Spanish VAT (12,500€ without VAT) (was 20,000€)

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12-562, overall weight: 900 kg, workpiece diameter (max.): 40 mm, spindle diameter: 54 mm, type of input current: three-phase, roll diameter: 150 mm, spindle speed (max.): 80 rpm, spindle speed (min.): 10 rpm, total height: 2,150 mm, total length: 1,200 mm, total width: 800 mm, roll width: 80 mm, year of last overhaul: 2026, Equipment: documentation/manual, We offer this factory-refurbished thread rolling machine RWT 12X FR, year of manufacture 2013. Directly from the manufacturer! Machine type: RWT 12X FR Rolling force: 12 t Power: 5.5 kW Year of manufacture: 2013 PLC: Siemens S7-313c HMI: Siemens OP7 Frequency inverter: Siemens Micromaster 440 Speed: 10–80 rpm, stepless adjustment Max. tool width: 80 mm Rolling spindle diameter: 54 mm Rolling die diameter: max. 150 mm Suitable for plunge and through-feed rolling. Condition: very good, used, workshop-refurbished by the manufacturer If you have any questions or need further information, please write us a message or call us. Ppodpfx Asydkb Soalsl

Condition: excellent (used), Year of construction: 2015, Roll pressure infinitely adjustable from 240 kN feeds - fine adjustment 0,5-45 mm/min turning speeds 0-80 U/min Swivel angle of the roller heads 11 ° Diameter of the roller spindles 69,85 mm Stroke - Roller screw slide 0-150 mm min. dist. - roller screws 138 mm max. dist. - roller screws 285 mm min. diameter - Rolling tools 230 mm max. diameter - Rolling tools 135 mm min. dia. 2 mm max. diameter 55 mm thread length at plunge operation 200 mm Ppsdpfx Aasxukrqjlel thread length at continiuous operation 2000 mm maximum thread pitch 4 mm total power requirement 14 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 2,0 x 2,5 x 1,9 m Rolling time continuously adjustable from: 0.1s Pause time continuously adjustable from: 0.1s Rolling spindle length: 200mm Machine bed height: 810mm Rolling spindle height above machine bed: 200 mm Height of support bearings: 115 mm Largest pitch for serrated teeth: 2.5 mm (up to 70 kg/mm2 Strength of the material)

Condition: used, Year of construction: 2000, Workstation with extraction and filtration system, suitable for dust extraction during plastering work with an angle grinder or also for welding operations. Ppsdpfeyay Rhex Aalsl

Condition: good (used), Ingramatic RP1 Max diameter: M6 Max. thread length: 42mm Pjdpfx Aashrdnkeljpl Max. shank length: 75mm Year: 80's

Year of construction: 1989, condition: excellent (used), Capacity (mm): M8x60/80 Max Production: 300 ppm Ppjdoliqf Nopfx Aalol Year: 1989