Used Threaded Bolt for sale (3,941)

Condition: used, on request Lajdpfjb Elzysx Ab Uoh

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: M10L/8539, Offer Number: M10L/8539 Machinetype: boltmaker 4 die 4 blow Info: Closed cutter , IFO , PKO , with thread roller and pointer Make: NEDSCHROEF Type: BL4 Constr. year: 1984 diameter range: 6-16 mm number of dies: 4 number of stations: 7 cutting length: 340 mm Lsdpfx Abewi Sxko Ueah shaft length under head: 65-300 mm output - pieces/min: 60-90 max. thread length: 65-150 mm press power: 150 to max. width acros flats: 22 mm Location: In our warehouse

Condition: good (used), Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners Laedpov I Ax Tsfx Ab Ueh -Hanger bolts: solar fasteners 49 pieces -Type: M10x180 -Price: per piece / minimum purchase 10 pcs. -Weight: 0.1 kg/pc.

Condition: good (used), approx. 870 pcs. shelves SSI Schäfer R3000, shelves approx. 1,m x 0,40m - used - : Price per piece: only 8,50 € (net), packed and loaded ex site! Minimum purchase 1 pallet (approx. 180 pieces) Manufacturer: SSI Schäfer Type: R3000 Year of manufacture: unknown dimensions: approx. 1m x 0,40cm 870 pcs. shelves Load capacity per shelf: min. 100kg Condition: good Lasdpfxski T Ako Ab Uoh Available: immediately Location. Frankenberg / Saxony

Condition: used, total length: 3,900 mm, total width: 1,500 mm, total height: 1,630 mm, number of shelf rows: 1, shelf length: 3,900 mm, shelf height: 240 mm, Mobile stacking rack. Rack weight 220 kg. Racks for storing heavy materials and products. Stackable and transportable by forklift, the rack is extremely versatile. It features a very sturdy construction with a shelf made of 80 mm steel profiles and sheet steel. Approximately 300 racks in varying technical conditions are available for sale. Lasdpfewcdw Sex Ab Ujh The rack storage area is 5.23 m².

Condition: used, Year of construction: 1968, functionality: fully functional, machine/vehicle number: M10L/8556, Offer Number: M10L/8556 Machinetype: boltmaker 4 die 4 blow Info: bushing cut-off , PKO Make: NEDSCHROEF Type: HPT6 Constr. year: 1968 diameter range: 10-22 mm number of dies: 4 number of stations (incl. cut off): 7 cutting length: 200 mm shaft length under head: 160 mm output - pieces/min: 60 max. thread length: 95 mm max. width acros flats: 32 mm Laedpfx Abewi Uc Sj Ujh press power: 350 to Location: In our warehouse

Condition: used, Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners Lasdpfx Abeipwcwe Ush -Hanger bolts: solar fasteners 49 pieces -Type: M10x200 -Price/delivery: complete -Weight: 0.1 kg/pc.

Condition: good (used), approx. 24 pieces frame SSI Schäfer R3000, depth 30cm - used - : Price per piece: only 30.- € (net), packed and loaded ex site! Manufacturer: SSI Schäfer Type: R3000 Year of manufacture: unknown Frame height: approx. 2,28m Frame depth: 30cm Condition: good Laedpfxski Tz As Ab Uoh Available: immediately Location. Frankenberg / Saxony

Condition: used, Year of construction: 1978, functionality: fully functional, machine/vehicle number: M10L/8705, Offer Number: M10L/8705 Machinetype: boltmaker 4 die 4 blow Info: bushing cut-off , PKO , IFO Make: NEDSCHROEF Type: BS3 Constr. year: 1978/2017 diameter range: 6-10 mm Ljdpjwi Su Ssfx Ab Ujah number of dies: 4 number of stations (incl. cut off): 7 cutting length: 75 mm shaft length under head: 50 mm output - pieces/min: 285 max. width acros flats: 17 max. thread length: 50 mm press power: 110 to Location: In our warehouse

Condition: used, Screws, hexagon head screws, cylinder head screws with hexagon socket, Allen screw -Hexagon bolts: M24 approx. 600 kg -Sizes/number: M24 x 70 to M20 x 120, see photo parts list -Quality: 8.8 black or galvanized -Manufacturer: various Lasdpfsiqpybox Ab Ush -Price: complete -Total weight: 617 kg

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: M10E/8973, Offer Number: M10E/8973 Machinetype: boltmaker 4 die 4 blow Make: NEDSCHROEF Type: BV4 Constr. year: 1989 diameter range: M8-M12 Laedpfx Abjwi Ubhj Ush number of dies: 4 number of stations (incl. cut off): 7 max. thread length: 75 mm shaft length under head: 20-125 mm cutting length: 30-150 mm max. width acros flats: 22 mm press power: 1500 kN output - pieces/min: 180 Location: Europe

Condition: used, Screws, hexagon head screws, cylinder head screws with hexagon socket, Allen screw -Hexagon bolts: M20 700 kg -Sizes/number: M20 x 65 to M20 x 140, see photo parts list -Quality: 8.8 black or galvanized -Manufacturer: various -Price: complete -Total weight: 700 kg Ledpfxsiqpyfe Ab Uoah

Condition: used, Indexing bolts, locking bolts, spring plungers -comes from a grandstand system -Execution: difficult -Bolt diameter: 20 mm -Bolt stroke: 38 mm -41 pieces: left one available -41 pieces: right ones available -Price: per piece -Weight: 2 kg/piece Laedpfx Aocd Em Asb Ueh

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, workpiece diameter (max.): 500 mm, rotational speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel paths: X-axis: 510 mm Y-axis: 510 mm Z-axis: 460 mm Workpiece dimensions: Maximum diameter: 500 mm Maximum height: 405 mm Table: Number of tables: 1 Table diameter: 500 mm Table width: 400 mm Maximum table load capacity: 300 kg Number of T-slots: 5 T-slot width: 80 mm Reference slot: 50 mm Ljdpfx Ajxldrxeb Uoah Table height: 800 mm Distance spindle nose – table, max.: 650 mm Distance spindle nose – table, min.: 190 mm Distance spindle nose – table center, max.: 600 mm Distance spindle nose – table center, min.: 140 mm Speeds: Rapid traverse X-axis (max.): 50 m/min Rapid traverse Y-axis (max.): 50 m/min Rapid traverse Z-axis (max.): 50 m/min Feedrate X-axis (max.): 50 m/min Feedrate Y-axis (max.): 50 m/min Feedrate Z-axis (max.): 50 m/min Spindle: Maximum speed: 12,000 rpm Minimum speed: 35 rpm Spindle motor (15 min): 22 kW Spindle motor (continuous): 15.0 kW Maximum tool diameter with adjacent tool: 80 mm Maximum tool diameter without adjacent tool: 125 mm Maximum tool length: 300 mm Tool change time (C/C): 4.5 s MACHINE DETAILS Electrical supply: Power (30 min): 66.6 kVA Power (continuous): 49.9 kVA Compressed air supply: Pressure: 500 kPa Flow rate: 200 l/min Cooling system: Total tank volume: 300 l Dimensions & Weight: Dimensions (L x W x H): 3,015 x 2,805 x 2,964 mm Weight: 7,600 kg EQUIPMENT Operator door lock with switch Full enclosure Top cover Transformer for Europe (CE) Ball screw cooling (X, Y, Z) Automatic tool measurement & Mazatrol PC-FUSION-CNC 640M 5X control Additional variables (600) Mazak Tornado thread cutting-drilling Mazatrol Mazak Tornado thread cutting-drilling (EIA) Intersection calculation between 2 lines Zero offset Reverse execution of commands G37 automatic tool length measurement Sequence comparison function RS-232C interface Mazacc 2D high-speed software Additional coordinate system (G54.1) Thread cutting function Machining navigation – forecast Machining navigation – control Machining navigation – results PCMCIA interface (2 slots) IC memory card interface Complete coolant system Lighting Manuals Note: The machine has not been used for 2 years, but was running smoothly up to that point. Pallets are included in the scope of sale and delivery. Tools and tool holders are not included in the scope of sale and delivery.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 720 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC, workpiece weight (max.): 3,000 kg, TECHNICAL DETAILS X travel: 3,200 mm Y travel: 720 mm Z travel: 600 mm Table height: 900 mm Number of T-slots: 5 T-slot width: 18 mm T-slot spacing: 125 mm Distance spindle nose to table: 140 - 740 mm Max. workpiece weight: 3,000 kg Clamping surface: 3,900 x 650 mm Tool holder: DIN 69871 AD 40 Spindle speed: 30 - 8,000 rpm Max. torque: 102 x 240 Nm Number of tools: 30 pcs Max. tool length: 330 mm Tool clamping: disc spring Max. milling capacity: 400 x 600 Max. thread size: M20 x M30 mm Boring diameter: 28 x 44 mm Feed rates X/Y/Z axis: 30,000 mm/min Rapid traverse X/Y/Z: 30 / 30 / 30 mm/min Max. feed force: 9,000 / 9,000 / 9,000 kN MACHINE DETAILS Control: Heidenhain TNC Space requirement (L x W x H): 7,200 x 3,400 x 3,100 mm Coolant: 250 bar Total power requirement: 50 kW EQUIPMENT Special accessory Trautomatic (L = 7.50 m) Special accessory full enclosure for work area (H = 3.60 m) Lasdpoxn Nd Sjfx Ab Ujh

Condition: ready for operation (used), operating hours: 33,600 h, functionality: fully functional, spindle bore: 83 mm, center width: 2,000 mm, turning diameter over bed slide: 570 mm, spindle speed (max.): 2,500 rpm, controller model: Siemens 810D, No reserve price – guaranteed sale to the highest bidder! Ledpfx Aexqpgfsb Ujah TECHNICAL DETAILS Swing diameter over bed: 570 mm Swing diameter over carriage: 340 mm Centre distance: 2,000 mm Speed range, stage 1: 1–625 rpm Speed range, stage 2: 4–2,500 rpm Spindle bore: 83 mm Spindle nose: Size 8 DIN 55027 Feed range longitudinal/cross: 0–20 mm/rev Metric threads: 0.1–400 mm Inch threads: 1/4–56 TPI Tailstock quill diameter: 80 mm Taper: MK 5 MACHINE DETAILS Control: Siemens 810D Electrical data Main drive: 20/17 kW Connected load: 30 kW Dimensions (L x W x H): 4,000 x 2,300 x 1,800 mm Operating hours: 33,600 hours EQUIPMENT Rapid traverse longitudinal/cross 8-position Sauter tool turret incl. holders Mayfran chip conveyor with coolant system Movable chip guard cover 3-jaw chuck Schunk Rota S 250 Manuals Note: The viewing windows and feed selection levers have been replaced. In addition, an oil change has been performed and the oil filter replaced.

Condition: like new (used), Year of construction: 2022, operating hours: 12 h, functionality: fully functional, machine/vehicle number: A320A/3798, Machine is purposed for orthopedic implant. Equipped with thread whirling tooling, enable very fast orthopedic / compression locking implant screw manufacturing. Lsdpfow Il Nlsx Ab Usah Condition is very prime, bought but never used for real production (only for research and development purposes), with around 12 hour TOTAL run-time only.

Condition: new, Year of construction: 2025, power: 300 kW (407.89 HP), A ball mill is a key equipment in the grinding process of barite. It is designed to grind and blend solid or hard materials into smaller pieces, particularly powder. In a barite grinding plant, ball mill is often used for grinding barite into an ultrafine powder for various applications. Here are key features and aspects of a ball mill used for barite grinding in a plant: 1. Mill Structure: - The ball mill for barite grinding typically consists of a horizontal cylindrical shell with ends that are flanged and bolted on. The ends may contain openings for feeding and discharging the barite. 2. Grinding Media: - Steel or ceramic balls are commonly used as grinding media in the ball mill. The grinding media helps in the grinding process by reducing the size of the barite particles. 3. Rotation: Lasdpfx Absq Ngafo Ueh - The mill rotates on its horizontal axis. The rotational motion of the mill, driven by a motor, causes the grinding media to cascade and grind the barite. 4. Feed and Discharge: - Barite is typically fed into the ball mill through a hopper or a conveyor. The ground barite particles are discharged from the mill through a discharge end. 5. Control System: - Modern ball mills are equipped with control systems to monitor and regulate critical parameters, such as mill speed, feed rate, and temperature. This allows for precise control of the grinding process. 6. Size Reduction: - The primary purpose of the ball mill is to reduce the size of barite particles. Grinding occurs as the barite is subjected to the impact and friction forces of the grinding media. 7. Classification: - Depending on the desired fineness, a classification system may be integrated into the ball mill to separate fine particles from coarse ones. This ensures that the final product meets the required specifications. 8. Dust Collection: - A dust collection system may be incorporated to capture and collect fine particles generated during the grinding process, ensuring a clean and safe working environment. 9. Liners: - The interior of the ball mill is often lined with wear-resistant materials, such as steel or rubber, to protect the mill shell from abrasion and ensure longer equipment life. 10. Application in Barite Processing: - The ball mill in a barite grinding plant is a crucial piece of equipment for processing barite ore into a fine powder. This powder is used in various industries, including oil and gas drilling, coatings, and pharmaceuticals. 11. Safety Features: - Safety features, such as monitoring devices and emergency shutdown systems, are typically incorporated into ball mills to ensure safe operation. The specific design and features of a ball mill for barite grinding can vary among different manufacturers and applications. It is essential to follow proper procedures and guidelines for the operation and maintenance of the equipment to ensure optimal performance and longevity.

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, center mower lifting cylinder -Hydraulic cylinder: stroke 200 mm -Piston rod: Ø 23 mm / thread Ø22 x 50 mm -Mounting: Ø20 x 32 mm -Cylinder: outside Ø 62 mm Ledpjgv Dikofx Ab Usah -Dimensions: 770/70/H62 mm -Weight: 7.2 kg

Condition: refurbished (used), CNC thread rolling machine - electronic retrofit with Siemens PLC and touchscreen Thommen PR17 CNC 2-roll Rollers rotation speed electronically managed Position and speed managed electronically Spindles diameter 54mm 2 pairs of supports (closed and open) The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy Power (Ton): 17 Number of rollers: 2 CNC: Yes Laedpoilh Tiofx Ab Ueh

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, throat depth: 2,005 mm, drilling capacity: 55 mm, spindle speed (max.): 1,200 rpm, column diameter: 360 mm, stroke length: 855 mm, TECHNICAL DETAILS Drilling capacity in steel (diameter): 55 mm Boring capacity: 80 mm Thread cutting: approx. M40 Arm reach min.: 320 mm Arm reach max.: 2,005 mm Column diameter: 360 mm Boom travel: 855 mm Clamping surface: 1,000 mm - 1,700 mm Automatic feeds: 0.06 - 1.00 mm/rev Spindle speed: 30 - 1,200 rpm Spindle taper: MT 5 Drive power – spindle motor: 400 V / 5.5 kW Quill stroke: 240 mm Spindle to base plate: 1,000 mm - 1,700 mm MACHINE DETAILS Dimensions & Weight Lajdexn Nbdspfx Ab Ujh Dimensions: 2.99 m x 1.12 m x 2.85 m Machine weight approx.: 4,800 kg EQUIPMENT Electric central clamping Box table Hydraulic vice Coolant device

Condition: excellent (used), Year of construction: 2006, operating hours: 14,300 h, functionality: fully functional, machine/vehicle number: 414-46, Year 2006 with Fanuc Series 18i-MB5 Country of manufacture: CE - Germany Net machine weight: 3,400 kg Dimensions: 185x259x250 cm TECHNICAL SPECIFICATIONS Travel X / Y / Z: 450 / 270 / 310 mm Acceleration X / Y / Z: 0.7 / 0.7 / 1.0 g Rapid traverse X / Y / Z: 40 / 40 / 60 m/min Spindle speed max.: 15,000 rpm Tool interface: HSK A 40 Milling capacity in St 60: max 60 cm3/min Drilling capacity in St 60: max Ø 16 mm Threading: up to M12 Lsdpfxsxqmwbo Ab Usah Tool magazine / positions: 24 – special version with 40 on this machine Tool change time: approx. 0.8 sec Chip-to-chip time: approx. 2.2 sec 5-axis version NC rotary tilting table: +/- 100° Rotary plate diameter: 100 mm Grid drill pattern: M6 x 50 mm 4th axis speed: 40 rpm 5th axis speed: 60 rpm Direct measuring system for 4th and 5th axes: +/-20’’ / +/-20’’ Distance spindle nose – table surface: 170 – 450 mm Maximum workpiece weight: 6 kg Technical information is provided without engagement and subject to errors or omissions.

Condition: used, Year of construction: 2017, machine/vehicle number: D 941 479, overall weight: 16 kg, input frequency: 50 Hz, The Atlas Copco Power Focus PF4000-C-HW is the ideal solution for precise and efficient bolted joints in industry. We offer this used control unit together with the matching STV-ST61-30-40 bolted joint. Technical specifications: Control unit model: Power Focus PF4000-C-HW, year of manufacture: 2017 Screwdriver model: STV-ST61-30-40, year of manufacture: 2017 Power supply: 200-240 V/ (50-60 Hz) Power consumption (W): 320 W Maximum operating temperature: +40.0° C Minimum operating temperature: +5.0° C Frequency: 50-60 Hz Laedpfx Absulayxj Ueh For further details, see the type plates on the control unit and screwdriver in the corresponding pictures.

Condition: repair required (used), Year of construction: 1999, functionality: limited functionality, Type: Thread rolling machine Manufacturer: Thommen – Made in Switzerland Model: PR17-CNC / AC Year of manufacture: 1999 BOSCH control unit Laedewwwgvepfx Ab Ush - newly arrived - Comparable to Profiroll

Condition: used, Year of construction: 2017, machine/vehicle number: D 941 454, overall weight: 16 kg, input frequency: 50 Hz, The Atlas Copco Power Focus PF4000-C-HW is the ideal solution for precise and efficient bolted joints in industry. We offer this used control unit together with the matching ETP ST32-10-I06 bolted joint. Technical specifications: Control unit model: Power Focus PF4000-C-HW, year of manufacture: 2017 Screwdriver model: ETP ST32-10-I06, year of manufacture: 2022 Power supply: 200-240 V/ (50-60 Hz) Power consumption (W): 320 W Maximum operating temperature: +40.0° C Minimum operating temperature: +5.0° C Lasdpfxsulaxzo Ab Ueh Frequency: 50-60 Hz For further details, see the type plates on the control unit and screwdriver in the corresponding pictures.