Used Bolt Cutters for sale (4,586)

Condition: good (used), Year of construction: 2019, functionality: fully functional, workpiece height (max.): 60 mm, workpiece width (max.): 60 mm, workpiece length (max.): 150 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 18 m/min, actuation type: electric, total height: 1,468 mm, total length: 4,412 mm, total width: 1,511 mm, Very well-maintained and regularly serviced. TECHNICAL DETAILS Workpiece height: max. 60 mm Workpiece width: max. 60 mm Workpiece length: max. 150 mm Edge thickness: max. 3 mm Djbwxtbezv Rcroaowb Processable edge materials: ABS, PVC, veneer strip, solid edge strips Feed and Operation Feed rate X-axis: 18 m/min Height adjustment: mechanical Type of operation: electric MACHINE DETAILS Data recorded as of March 20, 2026 Main switch – total operating time: 9,720 h 57 min 06 s Chain drive – total operating time: 1,216 h 19 min 51 s Total number of workpieces: 91,356 pieces Total workpiece length: 63,904.7 m Overall height: 1,468 mm Overall length: 4,412 mm Overall width: 1,511 mm EQUIPMENT - Smartouch touchscreen control - Program settings with memory function - Release agent - Pre-milling unit - Radius cutter, top and bottom - Corner rounding unit - Radius trimming unit - Flat trimming unit - Adhesive remover - Polishing unit - Automatic feed

Condition: good (used), functionality: fully functional, machine/vehicle number: WJMBB0A8M04010094, mileage: 24,500 km, overall weight: 7,500 kg, axle configuration: 4x4, color: red, Year of construction: 1995, Sales Description – Iveco Magirus 80.16 4x4 Firefighting Demonstrator Vehicle We are offering for sale our seldom-used IVECO Magirus 80.16 4x4 demonstrator vehicle, which was custom-built in 2013 together with Jacinto (Portugal) for demonstration purposes. The vehicle is based on a robust chassis from 03/1985 with just 24,xxx km mileage. The superstructure, including the fire centrifugal pump, was newly manufactured in 2013. The pump has only 34 operating hours. This fire engine is fully equipped and comes with a complete inventory. In addition, it features a fully automatic light mast and an 8.5 t front winch. Vehicle details: Model: Iveco Magirus 80.16 4x4 Chassis Year: 1985 Superstructure: 2013, Jacinto (Portugal) Mileage: approx. 24,000 km Centrifugal Pump Operating Hours: 34 h Equipment: Front winch (8.5 t), automatic light mast, full loading/inventory Equipment by locker (stowage compartment): Front left locker: Bolt cutter 2x Dräger breathing apparatus Hydraulic rescue spreader Djbwxtbox Uy Rljajwb Hydraulic rescue cutter Power unit for rescue tools Projector Tarpaulin Fire extinguisher Hose cassette Middle left locker: Fireco high-pressure pump (water/foam) High-pressure lance Various hose management accessories Rear left locker: Connection high-pressure pump to hose reel Various hose management accessories Outlet: 1x water / 1x foam Rear locker: Pump control station Light mast controls 1x suction inlet 1x water supply 1x "emergency exit" water outlet 1x rapid attack hose reel Rear right locker: Supply/transport hoses Pressure hoses "Lifeline" 1x pressure relief valve Outlet: 1x water / 1x foam Middle right locker: Backup generator (for light mast) 5x traffic cones 1x water curtain 1x suction strainer incl. rope 1x first aid kit 1x canister Front right locker: Petrol-driven fan Foam branchpipe Hose bridges Hooligan tool Chainsaw Hose section Various equipment Right underfloor compartment: 5x warning lights Diesel tank Left underfloor compartment: Batteries 1x wedge Pneumatics Remarks: The vehicle has been used exclusively for demonstration purposes. It is technically in excellent condition, but both the chassis and body do not comply with the latest standards for new acquisitions—which is the reason for this sale. Ideal for fire brigades with a limited budget or for export.

Condition: used, Year of construction: 2021, operating hours: 1,930 h, functionality: fully functional, PANIZZOLO PZH1500R – Twin-shaft Pre-shredder / Rotary Shear – Metal Shredder – 264 kW – 1,930 h Manufacturer: Panizzolo Recycling Systems Model: PZH1500R / PZ H 1500 R Machine Type: Twin-shaft shredder / Rotary shear / Pre-shredder Year: ____ Operating hours: 1,930 h Condition: Used Technical Specifications Cutting chamber: 1,500 × 1,400 mm Installed power: 264 kW (2 × 132 kW) Shaft speed: approx. 6–12 rpm Knives: Bolt-on (knives / cutters) Transmission: Heavy-duty industrial gearboxes Control: PLC / industrial automation system Weight: approx. 27,500 kg Applications / Materials Light scrap Steel sheets Drums / barrels Metal tanks Aluminum profiles Ideal for metal recycling, waste treatment center, shredding line, scrap metal recycling. Condition Fully functional machine Knives need replacing Regularly serviced Inspection and testing possible on site Sales conditions & pricing 🔧 Option 1 – Sold as-is (work required) Availability: immediate Price: €250,000 net ✅ Option 2 – Sold ready-to-use (fully serviced) Knives replaced General inspection and refurbishment Djbwxex I Dc Ejtbajwb Availability: lead time after order Price: €310,000 net

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Dwsbwoxdfa Uoxtbajb Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: good (used), Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer, bacon cutter, gate, cutting gate -Manufacturer: Holac, cutting blade for meat cutter multi-purpose cutter dicer -Type: Mounting Ø 50 mm see photos -Bolt circle: Ø 75 x 6 mm -Price/Delivery: complete Dwjbwxewy Uigotbajb -Dimensions: 328/190/H8 mm -Weight: 1.2 kg

Year of construction: 2001, operating hours: 27,400 h, condition: good (used), functionality: fully functional, Die-cutting machine with stripping station, foundation tilting table (third-party manufacturer), tilting table/preparation table, waste stripper, electronic double-sheet detection, pull marks BS + AS, machine height increased by 300 mm, 1 die-cutting frame, various stripping frames and stripping pins (including cart), quick centering device for sheet stacks, manual non-stop feed, manual non-stop delivery, price ex works, dismantling and loading can be arranged for an additional charge! Video available upon request! In May 2026, a PLATEN CONDITIONING was carried out by BOBST on the die-cutting machine. All deposits were removed from the upper and lower tables, and the die was polished. The sector was opened and assessed as being in "like-new" condition. Photos, video, or invoice available upon request! Note: The platform must be adapted by the buyer! Longitudinal handrail missing! Dsbwjzmyfdoxtbaowb Technical main data: Maximum sheet size: 720 × 1020 mm, Minimum sheet size: 350 × 400 mm, Maximum die-cutting force: 250 tons (2.5 MN), Maximum production speed: 7,500 sheets per hour, Processable materials: Paper / solid board: from 80 g/m² up to 2000 g/m², corrugated board: up to 4.0 mm thick Dimensions and weight: Machine length: approx. 6,000 mm Machine width: approx. 2,000 mm Machine height: approx. 2,500 mm Total weight: approx. 19,500 kg Features of the Series II: C.U.B.E. system: Electronic Bobst machine control system Centerline system: Micrometric adjustment for fast set-up times and precise tool alignment Stripping station: Integrated double-round stripping unit for waste removal Non-stop system: Continuous sheet feeding and delivery Ultrasonic double-sheet detection

Condition: new, working width: 1,250 mm, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. H7 125 Flail Mulcher / incl. slew ring / incl. floating mounting / NEW unit / in stock & immediately available Price: €17,890.00 net / €21,289.10 gross - Working width: 125 cm - Overall width: 140 cm - Depth: 97 cm Dwsboy E Etyowxtbasb - Height: 57 cm - Weight: 410 kg without accessories - Mulches grass and light brush up to 7 cm in diameter - Suitable for excavators from 5 to 15 tonnes - Universal interface for mounting various adapter plates - S420: double-walled housing made from high-strength S420 steel - WEARPLATE: housing with replaceable wear plates - LOW PROFILE: low-profile design - Indirect V-belt drive with 4 belts - Drive designed for hydraulic motors depending on carrier's oil flow - 4D ROLLER: reinforced support roller 152 mm Ø, with double-taper roller bearings, height adjustable - COUNTER CUTTERS: two rows of replaceable drop-forged counter blades - Rotor wall thickness: 12.5 mm - Front chain guard - Rear rubber protection - Colour: red RAL3020 · anthracite RAL7021 OPT 371 HELIX ROTOR TECHNOLOGY - Triple helix rotor with SMO flails (standard) - 12 pcs, part number 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29–58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 100 - 300 - Required hydraulic flow rate in l/min (min-max): 55 – 150 OPT 099 Floating Mount (parallelogram linkage) OPT 555 Oscillating Adapter OPT 372 Hydraulic 190° Rotary Device Three hydraulic lines are required: supply, return, and leakage oil. Optional: MS08 adapter plate incl. bolts and installation = €880.00 net Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a very large selection of various Seppi M. products in our warehouse, all immediately available! Mr. Herden (phone) will be happy to assist you. We are also happy to provide you with a financing offer upon request. We are an official sales and service partner for: - Westtech - OilQuick - Holp - Magni telescopic handlers - DMS - Gierking GMT - Weber MT - Seppi M. - JCB construction machinery - Mercedes-Benz - Iveco With over 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Subject to errors and prior sale! = Further information = Please contact Marius Herden for more information.

Condition: defective spare-parts repository (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 30038908, overall weight: 15,700 kg, We are selling a damaged machine that requires repair – sold as is, without warranty: Machine: Hedelius Tiltenta – CNC machining center – T7 Magnum 1R 40/530/3200/12 Year of manufacture: 2016 Serial number: 30038908 Weight: approximately 15.70 tons Damages (not a complete list): Ball screw of the X-axis is defective, including bearing, adjusting nut, timing belt, and 2 x adjusting nut KGT. Disc spring package on the fixed stop of the X-axis is defective. Hood of the HSA spindle is defective. Machine terminal is defective. MC screen/hard drive is defective. Slight deformations on the chip conveyor and compression on cable connections. The connecting lines of the terminal are defective and must be completely replaced. The tension bolts of the catching device of the Z-axis must be replaced. Dwebwxtezy U Ruebaob The machine geometry can only be measured after the machine has been electrically repaired. Any further damage to the geometry can only be recorded and determined afterward. The energy chain must be replaced. Length approx. 1,400 to 1,500 mm. Whether the Sauter swivel head was damaged during transport can only be determined during commissioning. The vertical slide of the Z-axis is defective and must be replaced. The left door must be straightened. Welding work may be required on the guide. Door switch and emergency stop chain must be checked during commissioning. Straightening work may be required at the pick-up station, as the terminal collided with it. The linear measuring system (LMG) of the X-axis is defective and must be replaced. The machine is sold in its damaged condition as a damaged object requiring repair without any warranties! The machine must be picked up within a short period, no later than week 39, otherwise storage costs will be charged. Sale basis: loaded onto a truck at the Spieß location, 61276 Weilrod Storage costs: from 21.09.2026, to be borne by the buyer.

Condition: new, working width: 125,000 mm, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. H7 125 Flail Mulcher / incl. floating linkage / NEW equipment / in stock & immediately available Price: €13,890.00 net / €16,529.10 gross - Working width: 125 cm - Overall width: 140 cm - Depth: 97 cm - Height: 57 cm - Weight: 410 kg - Mulches grass and light brush up to 7 cm Ø - Suitable for excavators from 5 to 15 tons - Universal interface for mounting various adaptor plates - S420: double-walled housing made of high-strength S420 steel - WEARPLATE: housing with replaceable wear plates - LOW PROFILE: low profile design - Indirect V-belt drive with 4 belts - Drive prepared for hydraulic motor depending on the carrier’s oil flow - 4D ROLLER: reinforced support roller, 152 mm Ø, with double-taper roller bearings, height-adjustable - COUNTER CUTTERS: two rows of replaceable drop-forged counter blades - Rotor wall thickness: 12.5 mm - Front guard with chains - Rear guard made of rubber - Color: red RAL3020 · anthracite RAL7021 OPT 371 HELIX ROTOR TECHNOLOGY - Triple helix rotor with SMO flails (standard) - 12 pieces, part number 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement, 29-58 cm³, and overpressure valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 100 - 300 - Required hydraulic oil flow in l/min (min-max): 55 – 150 OPT 099 Floating linkage (parallelogram guidance) OPT 555 Pendulum adaptor Three hydraulic lines are required: supply, return, and leakage oil. Optional: MS08 adaptor plate incl. bolts and installation = €750.00 net Multiple other adaptor plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a very large selection of different Seppi M. products in our warehouse, all ready for immediate delivery! Mr. Herden (phone) will be happy to assist you. Financing offers available upon request. We are an official distribution and service partner for Westtech. We are an official distribution and service partner for OilQuick. We are an official distribution and service partner for Holp. We are an official distribution and service partner for Magni telehandlers. We are an official distribution and service partner for DMS. We are an official distribution and service partner for Gierking GMT. We are an official distribution and service partner for Weber MT. We are an official distribution and service partner for Seppi M. We are an official distribution and service partner for JCB construction machinery. We are an official distribution and service partner for Mercedes-Benz. We are an official distribution and service partner for Iveco. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Subject to errors and prior sale! = Further information = Intended use: agriculture Djboyix Hajwxtbajwb Please contact Marius Herden for more information.

Condition: excellent (used), Year of construction: 1994, Josting Veneer Package - Cutting Machine Type: EFS 2300 L - Year of manufacture: 1994 Cutting length: 2,300 mm Stack height, max.: 80 mm Djbwxezzf Erstbajwb Safety light curtain by FIESSLER Guide light for displaying the cutting position Parallel fence, motor-adjustable, with fine adjustment via handwheel Connected load: 7.7 kW Weight: 2,700 kg Dimensions: 3,610 x 1,700 x 1,680 mm Available from: - Warehouse in 54634 Bitburg - Immediately available -

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 004-2024, total length: 2,250 mm, total width: 950 mm, total height: 1,900 mm, overall weight: 740 kg, power: 6.5 kW (8.84 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Distance between saw blades: 45 mm MACHINE DETAILS Operating voltage: 400 V Frequency: 50 / 60 Hz Power: 6.5 kW Dwobwxszvv Rnstbajb Operating current: 14.5 A Dimensions & Weight Dimensions (L x W x H): 2,250 x 950 x 1,900 mm Machine weight: 740 kg EQUIPMENT Completely made of corrosion-resistant AISI 304 steel Two parallel saw blades Fully mechanized wheels Adjustable speed of the side blade The machine comes from a business liquidation.

Condition: not inspected (used), Year of construction: 1989, functionality: unexamined, input voltage: 1,200 V, Industrial paper rewinder and cutter KAMPF (KAMPF GmbH & Co., manufacturer Jagenberg-Gruppe, Germany) Technical data: • Manufacturer: KAMPF GmbH & Co., Maschinenfabrik, Wiehl (Germany) • Group: Jagenberg-Gruppe • Year of manufacture: 1989 Djbwxtoztwuvobaowb • Serial number: 9791D • Machine type: industrial paper roll rewinder and cutter • Power supply: 3 × 400 V • Machine location: Papir – Novak s.r.o., Czech Republic Use of the machine: The machine is designed for rewinding and longitudinal cutting of roll materials, in particular: • paper, • kraft paper, • wrapping paper, • technical papers, • other similar strip materials. Machine components: • unwinding stand for the parent roll, • main rewinding and cutting unit, • guide and transport rollers, • winding shafts, • protective cover for the cutting section, • control panel, • mechanical tensioning using an Ortlinghaus clutch. Machine condition: • mechanically complete, • the machine was dismantled from operation and stored in a dry warehouse for a long time, • the unwinding stand is included, • the control panel is installed, • functionality has not been verified – the machine is untested, • it is sold in its current condition, • suitable for reconditioning, commissioning, or as a source of spare parts.

Condition: excellent (used), Year of construction: 2011, operating hours: 1,200 h, functionality: fully functional, overall weight: 1,800 kg, machine base height: 1,400 mm, Equipment: documentation/manual, Very good condition and low hours. Dwebwxtbezzdcvoajb KAMA Profold is a flexible folder gluer for folding cartons with straight-line or crash-lock bottom. ProFold 74 folds and glues blanks into a multi­tude of print products auto­mat­ic­ally and cost-effi­ciently! Whether present­a­tion folders, folded cards, ship­ping envel­opes, ticket pockets, cross folders and advent calen­dars or orders from the field of pack­aging, such as folding cartons with straight-line or crash-lock bottom. Produce all these products in-house on the ProFold 74, benefit from shorter delivery times and extend your margins! OPTIONS INCLUDED: -Device for crash lock bottom(automatic) boxes, K70513 -Addition Crash lock kit: 2 devices, 3 x rolls, 2 x 6 rolls, 6 clamps K70514 -Baumer HHS: 1 nozzle incl. hose, plus mounting bars K70601 - Spending/placing device - 4pcs. 1 unit down hold devices -1pc. Small folding knife left -1pc. Cross beam Addition Crash lock kit: 2 devices Technical specs: Max sheet size 740x740mm Min: 100x120mm Max speed: 150m/min Paper and cardboard 100-600g/m2

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, CNC Table Type Boring and Milling Machine - Horizontal | Brand: UNION Type: BFT 105 | Year of construction: 1990 Machining operations: Boring, reaming, deep boring, precision boring, reaming, countersinking, tapping, milling, circular milling, thread milling. The machine can be inspected under power by prior appointment. Condition: Very well-maintained, second-hand / operating condition. TECHNICAL SPECIFICATIONS: - Travels: - X-axis (table transverse movement): 1.750 mm - Y-axis (headstock vertical movement): 1.250 mm - Z-axis (table longitudinal movement): 1.175 mm - B-axis (table positioning): 360° - W-axis (boring spindle axial adjustment): 450 mm Clamping table: - Clamping surface: 1.250 x 1.400 mm - Maximum workpiece weight with centric clamping: 4 tons - T-slot spacing: 125 mm - T-slot width: 22H7 mm - Centring bore: 250 mm Boring spindle: - Diameter: 105 mm - Axial adjustment: NC-controlled - Tool holder: * with tapered shank: A 50 TGL 7837 * with steep taper: A 50 DIN 2080 * with clamping bolts: UNION 95-2805 (A 50 TGL 42620) DIN 69872-28 Speed ranges: - 3 continuously variable ranges: 4 – 2.500 rpm - Drive power: 23,7 kW - Max. spindle torque: 2.500 Nm Feed rates: Continuously variable feed range - X, Y, Z axes: 1 – 5.000 mm/min - Rapid traverse, X, Y, Z-axes: 10.000 mm/min W-axis: 5.000 mm/min B-axis: 3,2 rpm - Max. feed force: X and Y-axes: 16.000 N Z-axis: 25.000 N Specifications: - Total connected load: 50 kW/130 A - Voltage/frequency: 380 V/50 Hz - Machine weight (approx.): 17 tons - Dimensions: 6.560 x 4.370 x 3.450 mm EQUIPMENT: - 5-axis path control: Heidenhain TNC 355 - Swivelling control panel with central control station - Electronic handwheel - Other comprehensive ranges of accessories, such as tool holders, drill bits, Dwobwszlal Ioxtbaeb milling cutters, and tool trolleys and cabinets ... - Comprehensive documentation available (foundation plan, circuit diagrams, hydraulic documentation, operating instructions and spare parts lists, programming lists) No guarantee is given for the completeness and accuracy of the technical information and equipment. - Subject to prior sale -

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by telephone at ...). Seppi M. MIDI-KASTOR / 5–15 t / Stump Grinder / NEW / In stock & available immediately Price: €15,290.00 net / €18,195.10 gross - Cutter disc width: 0.10 m - Cutter disc diameter: 0.60 m - Total width: 0.80 m - Depth: 1.10 m - Height: 1.15 m - Weight: 450 kg - Stump grinder for excavator mounting - For the removal of stumps and tree roots Dsbsyl Hggjwxtbaewb - Grinds stumps and roots up to 30 cm deep - Suitable for excavators from 5 to 15 t - For mounting on various adapter plates - Drive designed for hydraulic motor, dependent on carrier machine flow rate - Indirect V-belt drive with 5 V-belts - Double chain protection - Rotor equipped with 32 fixed carbide-tipped tools - Colour: Red RAL3020 · Anthracite RAL7021 OPT 073 PISTON MOTOR Axial piston hydraulic motor F12-60 cm³ with pressure relief valve - Displacement in cm³: 60 - Required hydraulic pressure in bar (min–max): 200 – 350 - Required hydraulic flow rate in l/min (min–max): 70 – 100 Optional: MS08 adapter plate incl. bolts and installation = €750.00 net For operation, an independent hydraulic system is recommended. 3 hydraulic lines are required: supply, return, and drain. The device is supplied without hoses, connectors, or adapter plate. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and available immediately. Our warehouse carries a wide range of Seppi M. products, all available for immediate delivery! Please contact us at ... for more information. We are also happy to prepare a financing offer on request. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Errors and prior sale excepted! = Further information = Please contact Marius Herden for further details.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 714000-1, type of input current: three-phase, input voltage: 400 V, table length: 7,000 mm, table width: 2,000 mm, power: 36.77 kW (49.99 HP), Flow Waterjet 714000-1 Flying Bridge 7x2 meters Year of manufacture: 2010 60,000 PSI 9,000 hours Complete and in good working condition Various wear parts such as pipes and extra nozzles Abrasive hopper Abrasive feeder Immediately available Waterjet cutter Flow Waterjet Flowcut Waterjet cutting OMAX CNC plasma Hypertherm Laser fiber laser bystronic Amada Trumpf Accurl Bodor HSG JQ Nukon Dwobwxoxwtu Tjtbasb

Condition: excellent (used), functionality: fully functional, working width 3100 mm working height 47 mm manual fence adjustment to size Dwsbwxtszxp Rajbasb main motor power 4 kW cast iron body safety light barriers power supply 380V

Condition: new, Year of construction: 2026, PREMIUM VERSION MODELS are characterized by high rigidity and maximum resolution precision, operating with full interpolation on each axis: X, Y, and Z. Digital Signal Processing (DSP) ensures digital signal processing for smooth machine operation and high machining accuracy. The plotter with a working area of 1220 × 1230 mm provides stable and precise performance. The controller’s built-in memory allows the machine to operate without the need to reload the program each time. The spindle design incorporates high-quality machine bearings, characterized by very quiet operation and increased durability. Training at the CORMAK headquarters is included with every machine. Technical specifications Spindle: 3.7 kW / 18,000 rpm, inverter-driven, air-cooled Working area: 1200 × 1200 × 210 mm Control system: DSP Programming resolution: 0.001 mm Power supply: 400 V Dwebwxtjycuycebaob Weight: 450 kg Machine dimensions: 2000 × 1800 × 1640 mm Table height: 715 mm Guideways: linear Drive transmission: rack and pinion (Z-axis – ball screw) Software: UCanCAM V13 software, Polish language version (optional) IMPORTANT! The machine is equipped with a G-code path memory (resume function). In the event of a failure or power outage, it resumes operation from the last point without loss of time or material. CNC Milling Machine CORMAK C1212 PREMIUM (1200 × 1200) Standard equipment Leveling feet Bolts Wrenches Training cutter set ER32 collets – 1/8 inch, 1/2 inch, and 5–6 mm Unloading and positioning of the machine are the customer’s responsibility. The power plug must be provided by the customer due to different socket types (16A / 32A). Optional equipment (net prices) UCanCAM V13 software, Polish language version – PLN 1,190.00 UCanCAM V13 PRO software, Polish language version – PLN 3,190.00 Commissioning and training at the customer’s site – PLN 3,000.00 CE-compliant safety barriers (price per side) – PLN 600.00 CE-compliant laser light curtains – PLN 6,300.00 Warranty extension by 12 months – +15% of the net machine price Warranty extension by 24 months – +30% of the net machine price Warranty extension by 36 months – +45% of the net machine price

Condition: ready for operation (used), Veneer Lathe manufactured by Rau-te in Finland. Type 104" Dimension veneer sheets: Length 2.62 m. Minimum width 0.5 meter Infeed loading system included. Dwsbwozy Ui Djxtbaeb There is also a complete out feed system included ofter the Veneer lathe with acceleration conveyor, veneer cutting knife and veneer stacker. A second veneer lathe Raute 66” is also available with in- and out feed system. Dimension veneer sheets: Length 1.00 m to 1.65 m. Minimum width 0.5 meter

Condition: like new (used), Year of construction: 2023, operating hours: 2,400 h, functionality: fully functional, machine/vehicle number: R40410, power: 371.43 kW (505.00 HP), empty load weight: 75,000 kg, cutting force: 900 t, COPEX REFLEX 900 ton mobile diesel shear baler (year 2023). Maintenance carried out by the manufacturer. Output: 10 to 22 t/h depending on the type of scrap to be sheared. Immediately available. Dwobwoxg Ekfoxtbaob

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, wheel diameter: 700 mm, gear diameter: 1,000 mm, wheel width: 152 mm, workpiece spindle speed (max.): 67 rpm, feed length X-axis: 610 mm, feed length Y-axis: 610 mm, feed length Z-axis: 725 mm, pivoting range: 95 °, spindle bore: 203 mm, travel distance X-axis: 610 mm, travel distance Z-axis: 725 mm, Equipment: rotational speed infinitely variable, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Dwebwxtbsxaqa Soaeb Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 231458, functionality: fully functional, travel distance X-axis: 3,700 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 370 mm, spindle speed (max.): 6,000 rpm, table load: 800 kg, Note: The auction end date has been postponed to September 16, 2026! TECHNICAL DETAILS Travel range, X-axis: 3,700 mm Travel range, Y-axis: 2,100 mm Travel range, Z-axis: 370 mm Rotation range, C-axis: 0–362° Dwobwxjzuyryetbaeb Swivel range, A-axis: 0–90° Travel time, C-axis (0–392°): 3 s Travel time, A-axis (0–90°): 2 s Spindle speed, electric spindle: 6,000 rpm Power, electric spindle: 16.5/56 kW Speed, X-axis: 30 m/min Speed, Y-axis: 30 m/min Speed, Z-axis: 5 m/min Dimensions, tilting table: 3,500 × 2,000 + 500 mm Load capacity: 800 kg MACHINE DETAILS Stainless steel cover for saw blade with opening for cutter: Ø 425 mm Stainless steel cover for saw blade: Ø 625 mm Total power consumption: 23 kW Water consumption for saw blade: 30 L/min Total weight: 4,800 kg EQUIPMENT Material and saw blade measuring system Vacuum system for moving the panels Camera with software for management Pneumatic tilting table Motorized rotary head (C-axis) Motorized saw blade tilt (A-axis) Stainless steel cover for saw blade with opening for cutter Stainless steel cover for saw blade

Condition: good (used), Storage location number: 3134 Manufacturer: Kuhlmann (Hahn & Kolb) Type: Machine number: Grinding spindle speed: 2,750 rpm Max. collet diameter: 17.5 mm Max. radius to be ground: 10 mm Coarse adjustment of the workpiece carrier: mm Max. fine adjustment of the workpiece carrier: mm Power of the drive motor: 0.25 kW Dimensions: 430 x 450 x 350 mm Weight: 32 kg Debwszy I D Ijxtbaewb

Condition: new, Year of construction: 2026, The ZX 7045E 230V milling/drilling machine is a versatile tool for machining steel . It is ideal for drilling, reaming, boring, threading , milling and face milling. The machine allows precise drilling of holes in cast iron up to 45/40 mm in diameter. In addition, bolts up to M12 mm can be threaded, up to 80 mm wide can be milled and rebates up to 22 mm deep can be made. The ZX 7045E milling/drilling machine is a reliable tool ready to go! Machine characteristics Heavy Stable Cast Iron: The robust construction based on heavy cast iron ensures stability and durability of the machine even during intensive use. Milling machine height adjustable on the slide: The unique height adjustment on the slide, rather than on the column, allows the machine to be adapted to different applications. Massive Cross Table for Milling/Drilling Machine: An impressively sized table with a precision-ground surface provides a solid base for a variety of projects. Swallow Tail Shaped Guides: Innovative dovetail-shaped slides guarantee smooth movements in three axes for excellent machining results. Quiet Operation Thanks to Ground Gear Wheels: The ground gears make the machine run quietly, which contributes to comfort in the workshop. Left and Right Rotation: Rotate the tool in both directions, adapting to different tasks. Pivoting head +/- 90 degrees and Adjustable head height: Flexibility in angle setting and height adjustment allow full control over material processing. Additional Options, Additional Benefits: The ZX 7045E version is available from stock and you will also receive a kit free of charge: Drill chuck Reduction bush MK4/MK3 Reduction bush MK3/MK2 The ZX 7045E milling/drilling machine is not just a tool, it is a partner that can meet even the most demanding challenges in your workshop. Order now and experience perfect precision and performance! (Base available as an option) Technical data Maximum drilling diameter 45 mm Maximum face milling diameter 80 mm Maximum cylindrical milling cutter diameter 28 mm Maximum thread diameter 12 mm Spindle pin protrusion 100 mm Spindle taper MT4 Spindle speed (6 speeds for 1400r/min motor) 1400r/min ) 95, 170, 280, 540, 960, 1600min-1 Maximum distance from spindle nose to table 460 mm Travel in X / Y / Z axis 500 / 210 / 425 mm Distance from spindle to column surface 245 mm Work table dimensions 730x210 mm Base dimensions 400x600 mm Motor s1/s6 1500W/2100 W 230V Dwjbswnb T Iowxtbaeb Machine dimensions (height with base) 1080 x 770 x 1460 mm Weight 278 kg Available accessories MK3/B18 drill chuck shank handy tools drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2

Year of construction: 2020, operating hours: 414 h, condition: used, functionality: fully functional, machine/vehicle number: C-322-K7-13853, We offer this used MultiCam Celero 7 Flatbed cutter / CNC Router, year of construction 2020. Djbwjzvvc Doxtbaowb Serial Number: C-322-K7-13853 Year of Manufacture: 2020 year Voltage: 380 V Phases: 3 Ph Current: 58.2 A Power: 38.3 kW Frequency: 50/60 Hz Comes with HF Spindle, Two Knife modules, ATC, Depth Adjustment Sensor, Laser Pointer If you have any questions or need more information, feel free to send us a message or give us a call.