Used Thread Milling Machine for sale (65,406)

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 83 / 57 Nm tool taper SK 40 DIN 69871 table surface area 700 x 500 mm max. table load 500 kg T-slots 7x 14 x 63 mm number of toolpositions 60 pos. Dujdpfey E Tv Ajx Ah Neu max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm change-time tool to tool 1,6 sec change-time chip to chip 8,0 sec rapid traverse 24 m/min Feed force ( X / Y / Z ) 4,5 kN feed speeds 1 - 24.000 mm/min total power requirement 26 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m CNC - Milling Machine Vertical DECKEL MAHO - DMU 50 - 3 Axis - only ca. 8.097h Spindle-Hrs. - Backup package for power outages - DXF import - incl. workbench - incl. tool cabinet - incl. cabinet for SK 40 tool holders - incl. approx. 63 SK 40 tool holders

Condition: used, Engraving Cutter Grinding Machine MBB - Maschinenfabrik Baden Baden Type FSS Serial No. 2861 Year of manufacture: 1987 Dedpfjyxy S Rox Ah Neuu Grinding wheel diameter: 100 mm Grinding wheel speed: 4,600 rpm Motor power: 0.25 kW Power connection: 380 Volt, 50 Hz - Collet clamp device for collet 355E (saw thread M20x2 mm) - Including 3 collets Ø 0.5 - 6.0 - 17.0 mm - Maximum collet bore: 18 mm - Grinding wheel dressing device - Cup wheel Ø 100 mm - Operating manual Space required (L x W x H): 450 x 450 x 300 mm Weight: 32 kg Very good condition

Condition: good (used), Storage location: 3100 Type / Model: FU 250x1000 Travel ranges, self-powered, x-y-z: 800 - 190 - 360 mm Dsdpfxjzbtcmj Ah Neuu Travel ranges, manual, x-y-z: 820 - 220 - 380 mm Table: 1,000 x 250 mm Speed range: 28 to 2,800 rpm Spindle mount: SK 40 Feed rates, longitudinal and transverse: 10 to 630 mm/min Feed rate, vertical: 4 to 252 mm/min Rapid traverse, longitudinal and transverse: 3,150 mm/min Rapid traverse, vertical: 1,260 mm/min Power connection: 8 kW Accessories/Equipment: Vertical head Condition: good Weight: 1.7 t Dimensions: 2,500 x 2,400 x 1,600 mm

Condition: good (used), Year of construction: 1968, Stock number: 2908 Manufacturer: CUGIR Romania Year of construction: 1968 Machine number: 3266 Type / Model: FU-1 Travel x-y-z: 700 - 370 - 250 mm Table: 1,250 x 320 mm Speed range: Spindle holder: SK 50 Feed rates: Rapid traverse: Connection: 7.5 kW Accessories/equipment: Condition: good Dodpfx Asvc D Apjh Njuu Weight: approx. 2.5 tons Dimensions: 2,000 x 2,000 x 1,700 mm

Condition: excellent (used), Year of construction: 1998, Hermle UWF 802 M Hermle UWF 802 M with Heidenhain TNC 124 NC control, cycle-controlled, year of manufacture 1998, in very good original condition. Dedpfx Ahjzbrz Ie Njuu The machine comes from the training workshop of a renowned German mechanical engineering company. Technical data: Travel distances X: 500 mm, Y: 430 mm, Z: 400 mm Table size 800 x 390 mm Spindle connection ISO 40 Spindle speed 71 to 3550 rpm, 18 steps Feed rate X and Y 2 to 1600 mm/min, stepless Feed rate Z 2 to 1000 mm/min, stepless Rapid traverse X and Y 1.6 m/min Rapid traverse Z 1 m/min Spindle drive 3 kW Mains connection 400 volts, 50 Hz - Spindle speed via 18 gear stages - Vertical milling head, swiveling to the right and left - Hydro-mechanical tool clamping, vertical and horizontal - Automatic central lubrication - Coolant system located next to the machine - Control cabinet fixed to the machine - Fixed angle table - Operating manual and wiring diagram Space requirement L x W x H 2000 x 1800 x 1950 mm Weight approx. 1750 kg Accessories and equipment: Operating manual, electrical diagrams Machine feet About the machine: We offer a Hermle UWF 802 M milling machine with Heidenhain TNC 124 NC control, cycle-controlled, year of manufacture 1998, in very good condition. The machine is fully functional, of course. All slides move very smoothly and evenly. Even at high speeds, the Hermle runs very quietly. This newer generation of milling machines is very user-friendly. Take advantage of the opportunity to inspect this machine on-site while it is powered up and see for yourself what condition it is in.

Condition: good (used), For sale is a Deckel Maho DMU 60T machining center. The machine can be inspected on site. Dujdpoydm Saofx Ah Neu

Condition: used, functionality: fully functional, The REMS Magnum pipe threader is suitable for pipes from 1/4" to 2". The following threading dies are included: - 3x: R1/2 - 3/4 - 5x: R1 - 2 The unit has been function-tested and comes with an electrical inspection carried out by a professional electrical company. Duedjyyxi Rspfx Ah Neu

Condition: excellent (used), Catalogue number 7758 TECHNICAL DATA Circular Saw: - max saw blade diameter 350mm - spindle 30mm - lockable spindle - blade adjustable front/back, up/down, angle - blade guard - motor 1.1kW - extraction port diameter 80mm Milling Machine: - tenoning spindle: - spindle diameter 40mm - spindle working height 150mm - lockable spindle - max cutter diameter 350mm - 2 spindle speeds: 3000, 4500 rpm - motor approx. 5.5kW - brake Duedpfxozaa Tvo Ah Nou - side carriage – manual feed - carriage dimensions (L/W): 1180x600mm - mitre fence - pneumatic clamp - extraction port diameter 125mm - dimensions L/W/H: 1750/2600 (for transport: 1200)/1400mm - weight 715kg ADVANTAGES – German-made – very good condition – used tenoner Net price: 13,900 PLN Net price: 3,300 EUR (based on 4.2 EUR rate) (Prices may vary with significant fluctuations)

Condition: ready for operation (used), Year of construction: 1996, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 2,500 rpm, Heidenhain TNC 407 control unit Table: 2000 x 700 mm Travel: 2000 x 800 x 800 mm Spindle: SA 50 Maximum spindle speed: 2500 rpm Weight: 10000 kg Dedpfxezbrkps Ah Nouu

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 1,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 3,000 rpm, overall weight: 10,000 kg, Heidenhain TNC 426 control Table: 1400 x 700 mm Travel: 1300 x 800 x 800 mm Djdjzbrilepfx Ah Neuu Spindle: SA 50 Maximum spindle speed: 3000 rpm Weight: 10,000 kg

Condition: good (used), Code: 0324 Brand: OMEC Model: 750 Automatic milling machine for dovetail joints on drawers and various furniture parts Technical data: Useful working width 480 mm Duedpfeytr Sdjx Ah Neu Thickness of drawer fore parts 60 mm Number of joints per minute: at 1st speed 25 , at 2nd speeds 35 Electric motor power of toolholder spindle 1,5 Hp Electric motor power trip traverse 1,5 Hp Overall dimensions mm 800 X 1300 X 1200 h Weight kg 350

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 8,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 2,500 mm, spindle speed (max.): 3,000 rpm, rotational speed (max.): 3,000 rpm, type of input current: three-phase, coolant supply: 15 bar, spindle motor power: 33,000 W, controller manufacturer: HEIDENHAIN, controller model: 430 CA, power: 0.033 kW (0.04 HP), Equipment: rotational speed infinitely variable, ANAYAK HVM 9000 – CNC moving column milling machine | 8300 mm x travel | Fully overhauled High-capacity CNC bed milling machine with moving column, reconditioned in workshop. Perfect for heavy-duty machining of large components with precision and reliability. 🛠 Key technical specifications: • X-axis travel: 8300 mm • Y-axis travel: 2000 mm • Z-axis travel: 2500 mm • Spindle power: 33 kW – 3000 rpm • Spindle taper: ISO 50 DIN 69871-B • Tool changer: 30 positions • Automatic axes: B and C • CNC Control: HEIDENHAIN TNC 430 CA • Internal coolant: 50 l/min at 15 bar • External coolant: 100 l/min 🔧 Full retrofit includes: • Regrinding and geometry adjustment of Y and column guides • Complete head overhaul: new bearings, seals, gears • Full electrical cabinet update under CE compliance • New telescopic covers, drag chains, and motor wiring • Machine tested and delivered with full documentation ✅ Ideal for: • Large-scale component machining • Energy, wind, and railway industries • Mold making, aerospace structures, and shipbuilding Dsdpfsqpd D Iex Ah Neuu 📌 Ready for immediate delivery. Power, scale, and accuracy in one robust CNC machine.

Condition: excellent (used), functionality: fully functional, Universal milling machine Maho MH 500 C, CNC control system Philips 432 and accessories from a training workshop, in excellent condition!! Technical data: >> Year of manufacture approx. 1985 >> CNC control system: Philips 432 >> Speed up to 4000 rpm >> Total connection value: 24 kVA >> Travels X/Y/Z: 500/400/300 mm >> Vertical and horizontal spindle - SK40 Dsdpfxjzaaq Uo Ah Njuu >> Hydraulic clamping system >> Weight approx. 2000 kg >> Space requirement: approx. 2.6 m x 2.2 m, height 1.9 m Accessories and equipment: >> CNC control system: Philips 432 >> Hydraulic clamping, vertical and horizontal >> Central lubrication >> Electronic handwheel >> Coolant system >> Tool cabinet with accessories: vise, tool holders, clamping tools, collets, ground shims and much more Complete manuals, machine data sheet, operating instructions, electrical diagrams, etc. About the machine: Offered is a Maho MH 500C universal milling machine with a Philips 432 CNC control system, in very good condition. Each axis has a continuously adjustable axis drive, consisting of a responsive drive motor and a backlash-free ball screw. Thanks to various cycles such as circular pockets, rectangular pockets, milling grooves, drilling, deep-hole drilling, thread cutting, etc., the Maho is very easy to operate. The milling machine was used in a training workshop. Furthermore, the machine has hydraulic clamping for both vertical and horizontal operation. Switching from vertical to horizontal operation is very easy by folding down the vertical head. Take advantage of the opportunity to inspect and test the Maho on site while it is powered up.

Condition: used, Universal Milling Machine DECKEL FP1 Travel X: 300 mm Travel Y: 150 mm Duodpozbq Uyefx Ah Nou Travel Z: 300 mm Horizontal + vertical spindle Cone SA40 DECKEL Spindle speed: from 40 to 2000 RPM Table size: 600 x 210 mm Horizontally tiltable head Straight table Spindle motor: 2 speeds Motor: 1,3 kW Feeds: X - Z auto / Y manual Voltage: 380 V Width: 1200 mm Depth with electrical panel: 1200 mm Height:1600 mm Weight: approx 900 kg

Condition: used, Universal Milling Machine DECKEL FP1 Travel X: 300 mm Travel Y: 150 mm Travel Z: 300 mm Horizontal + vertical spindle Cone CM4 DECKEL Spindle speed: from 40 to 2000 RPM Horizontally tiltable head Spindle motor: 2 speeds Motor: 1,5 kW Dodezbq T Aepfx Ah Nsuu Feeds: X - Z auto / Y manual Supplied without table only with one 4 concentric jaws Ø 140 mm Voltage: 380 V Width: 1200 mm Depth: 1200 mm Total height: 1600 mm Weight: approx 900 KG

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details x-travel 4000 mm y-travel 1350 mm z-travel (Vert.) 1600 mm Control Heidenhain iTNC 530 table surface area 4200 x 1150 mm table load 13 t tool taper ISO 50 spindle turning speed - stepless 0 - 3000 U/min transmission ratio 2 Duodpfx Aezaan Toh Neu spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min weight of the machine ca. 37 t dimensions of the machine ca. 12,9 x 6,53 x 3,79 m Additional information In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h A current geometry measurement report is available. * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details x-travel 620 mm y-travel 420 mm z-travel 400 mm Dujdpezaakbjfx Ah Nju Control Heidenhain TNC 410M table surface area 800 x 400 mm tool taper ISO 40 spindle turning speed - stepless 50 - 4000 U/min main drive motor 5,5 kW weight of the machine ca. 2,1 t Additional information * CNC control HEIDENHAIN TNC 410M * Coolant equipment * Machine lamp

Condition: used, Universal Milling Machine ERNAULT SOMUA HES ZHV1 Travel X : 700 mm Travel Y : 250 mm Travel Z : 350 mm Duedpfx Ahezbqwuo Nsu Rotation : from 40 to 2000 RPM Table size : Length 1200 mm x Width 300 mm Vertical/horizontal universal swivel head Scale 3 axes EAE Rapid 3 axes Voltage380 V Width: 2000 mm Depth: 1800 mm Total height in height: 1600 mm Weight: approx 1,5 T

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min Dodpfxoy U U Nie Ah Nsuu spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: good (used), Year of construction: 2015, Internal item number: 26008 Duodpfx Aoymwpbjh Nou Universal Milling Machine Wagner FTA 400 Year of manufacture: 2015 Travel paths: X 400 / Y 200 / Z 380 mm Spindle mounting: SK40 Speed range: 50 - 2000 rpm Table size: 750 x 320 mm Workpiece weight: max. 285 kg Main drive: 2.2 / 3.0 kW Feed: 50 - 450 rpm (stepless) Quill diameter: 90 mm + Hydraulic machine vice + Safety enclosure (UVV-compliant) + Coolant pump + Operating manual Dimensions (LxWxH): 170 x 170 x 190 cm Weight: 1300 kg The machine comes from an educational institution and is in well-maintained condition. You are welcome to inspect the machine under power in over 500 m² of heated storage space.

Condition: good (used), Internal Item No.: 25110 Universal Milling Machine Deckel FP3 Machine No.: 2482 + 3-axis digital readout + Safety guard with switch (UVV) + Machine lamp + Various SK40 tool holders and collet set (S20x2) Milling table: 800 x 420 mm Spindle taper: SK40 Max. speed: 2000 rpm Drive power: 3 kW Travel X/Y/Z: 500/300/400 mm Dimensions (LxWxH): 1400 x 1500 x 1800 mm Dusdjyb Su Uopfx Ah Nju Weight: approx. 1500 kg The machine is fully functional and can be demonstrated under power by arrangement in a heated storage area of over 500 m².

Condition: good (used), Year of construction: 2007, Internal item no.: 26009 You are welcome to inspect the machine under power on over 500 m² of heated storage area. Universal Milling Machine Intos FN20 Year: 2007 + 3-axis digital readout + Hydraulic machine vice + Operating manual + Machine lamp + Coolant pump Travel: X 300 / Y 200 / Z 350 mm Spindle taper: SK40 Speed range: 50 - 2500 rpm Clamping area of milling table: 240 x 600 mm Feed rate: 8 - 400 mm/min Rapid traverse: 1340 mm/min Dimensions (LxWxH) approx.: 130 x 150 x 190 cm Dujdpfxjyg Dk Sj Ah Neu Weight: approx. 1000 kg The machine comes from an educational institution and is in well-maintained condition.

Condition: used, Internal item no.: 26004 Universal Milling Machine Hermle UWF 800 + 3-axis digital readout + Hydraulic machine vice Röhm + Rotary, swivel, tilting table + Steady rest + Machine documentation + Machine feet Travel paths: X 500 / Y 300 / Z 400mm Table: 600 x 320mm Spindle mount: SK40 Power: 3 kW Dimensions (LxWxH): 140 x 190 x 170cm Weight approx. 1,000 kg Dusdpfsy Hittjx Ah Neu The machine comes from a training facility and is in well-maintained condition. You are welcome to inspect the machine under power on more than 500m² of heated storage area.

Condition: good (used), Year of construction: 2000, Internal article no.: 26005 Margin taxation in accordance with §25a Value Added Tax Act. You will receive a proper invoice; however, VAT is not shown separately. You are welcome to inspect the machine under power in our heated warehouse with over 500 m² of storage space. Stimin FUS-22-2M Year of manufacture: 2000 Travel distances: X 320 / Y 250 / Z 300 mm Spindle mount: ISO40 Spindle speeds: 45 - 2240 rpm Table size: 670 x 320 mm Duedsygv Shjpfx Ah Nju Feeds: 12.5 - 630 mm/min Drive power: 1.5 kW Quill stroke: 60 mm Total power requirement: 2.5 kW Approx. dimensions (LxWxH): 1.10 x 1.20 x 1.90 m Machine weight: approx. 1100 kg The machine comes from a training facility and is in well-maintained condition.

Condition: good (used), Year of construction: 2005, Internal article no.: 24012 Universal milling machine Dusdpfx Asrywa Rjh Nsu Macmon M100 NC YEAR OF MANUFACTURE: 2005 Control: Heidenhain TNC124 + coolant pump + machine vice Travel: X 310 / Y 170 / Z 330mm Speed: 40-2000 rpm Mounting: SK40 LxWxH: 1200 x 1600 x 1850mm Weight: approx. 1000Kg