Used Thin Cutting Frame Saw for sale (22,978)

Condition: good (used), WD creel type GXW 71, with spherical roller bearing in the main shaft. Suitable for all base plates of GXV and GXW creels. Fully hydraulic. With hydraulic saw tensioner. Lhsdpeuql Ilefx Aftsi Ideal as a replacement sash gang or swing replacement.

Condition: good (used), Year of construction: 2014, functionality: fully functional, ELCON Automatic Multiwall Sheet Cutting Machine LANCET 215 For vertical and horizontal cutting of multiwall sheets with a rigid blade! Technical Specifications: Cutting Height: 2,150 mm Cutting Length: 7,300 mm Cutting Depth: 50 mm Required Air Pressure: 6 bar Dimension setting for horizontal cuts: electronically adjustable via touchscreen Dimension setting for vertical cuts: via scale from 0–1,300 mm Feed rate: continuously adjustable from 0 to 60 m/min. Lhodjyymhuspfx Aftsi Features: Solid, enclosed rear wall with felt support (new) Aluminum material support table Right-hand, pneumatically retractable material stop Pressure device for vertical cuts with adjustable pressure Lower pneumatic sheet clamping device per meter of cutting length Pneumatically retractable blade Pneumatically swiveling blade

Condition: used, Double Head Cutting Saw – FOM ALVA 450 B Professional double head saw for cutting aluminium, PVC and light alloy profiles, ideal for window and door production. Lhodpfx Afsyylikotji Year: 2002 Carbide blades Ø 450 mm Three-phase motors 3 HP (2.208 kW) – 2800 rpm – 230/400V – 50 Hz Direct transmission motor – carbide blade Blade shaft Ø 32 mm Head inclination: 90°   45° external   22.5° external   Intermediate angles with mechanical stop and reading on graduated vernier First head fixed Second head mobile: automatic positioning with manual option Positioning speed (automatic) of the mobile head: 12 m/min Positioning accuracy of the mobile head: +/- 0.1 mm Minimum cutting capacity between the two heads: 300 mm (reducible with dedicated program) Maximum cutting capacity between the two heads: 4000 mm Hydro-pneumatic blade feed (adjustable forward speed – rapid return) Electrical panel separated from pneumatic panel Dual operating pressure with low-pressure servo control Air consumption per working cycle: 28 Nl Vertical and horizontal pneumatic clamps Mist lubrication system Prepared for chip and fume extraction Operating pressure: 7 bar (adjustable) Roller table for mobile head (3 m) Machine in working condition.

Condition: used, Miter chop saw for aluminum (special machine construction with 4 servomotors) Circular saw, miter saw, crosscut saw Year of construction: 2002 Saw blade diameter: 500 mm Cutting range at 90°: Round Ø 180 Rectangle 350 x 140 mm (through crosscut) Cutting range at 45°: Round Ø 180 Rectangle 350 x 100 mm (through crosscut) Base carriage guide length: 1100 mm Travel on the base carriage (forward/backward): 650 mm Lsdodzp T Dopfx Aftohi Travel on the stand (up/down): 120 mm Saw blade speed: approx. 3000 rpm Motor power: 2.2 kW Power connection: 400 volts, 50 Hz - Controlled crosscut movement - Controlled saw blade height adjustment - Controlled miter cut through pivoting saw head - Controlled miter cut through tilting saw head - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gearbox (Motor MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN) - Axis movement perpendicular via INDRAMAT servomotors and ball screw spindles (Motor MKDO41B-144-KP1-KN) - A total of 4 Indramat servomotors are installed - Very good German machine engineering Space requirement: L x W x H 1150 x 1100 x 1400 mm Weight: approx. 360 kg Good condition This unit comes from a special machine for specific products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: excellent (used), functionality: fully functional, Blade inclination -45° / +45°. Maximum vise opening 180 mm Maximum non-feedable length 385 mm Disc size 350 mm Blade rotation speed 1700 / 3400 rpm - 2 speeds Ljdpfex Hw Sqjx Aftjhi

Year of construction: 2011, condition: like new (used), functionality: fully functional, Electronic X-axis control X-axis positioning speed (m/min): 25 Pneumatic tilting of heads Ledsx A Ar Sopfx Aftehi External tilt 45° Mechanical adjustment of intermediate angles Hydropneumatic blade feed Usable cutting length (mm): 4,000 Minimum standard cut at 2 heads at 90° (mm): 310 Blade diameter (mm): 450

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Dimter / Weinig OptiCut 450 Quantum Optimizing Cross-Cut Saw Manufacturer: Dimter / Weinig Model: OptiCut 450 Quantum Year of manufacture: 2006 Machine description: For sale: Dimter / Weinig OptiCut 450 Quantum optimizing cross-cut saw, year 2006, designed for high-speed and precise cross-cutting of timber with yield optimization. The Quantum version is one of the top models in the OptiCut 450 series and was developed for industrial use with extremely high output, precise positioning and reliable material transport. The machine is suitable for fixed-length cutting, defect cutting and production optimization. The OptiCut 450 series was designed for integration with scanners, sorting systems and automatic handling equipment. Typical Quantum features include VarioSpeed infeed, HighGrip feed rollers, an independent length measuring system and a servo-controlled intelligent waste gate. Technical data: - capacity: up to approx. 540 cuts/min - feed speed: approx. 300 – 415 m/min - maximum workpiece length: approx. 6.3 m - saw blade diameter: 450 mm - maximum cutting width: 235 mm - maximum cutting height: 100 mm - working height: 900 mm - motor: 7.5 kW - air consumption: approx. 1200 NL/min - cutting accuracy in the OptiCut 450 series: approx.± 0.8 mm Lhsdpfx Aoyu Urieftji Features / advantages: - extremely high cutting performance - high positioning accuracy - VarioSpeed system reducing gaps between boards - HighGrip rollers for secure material transport - servo-controlled waste gate - suitable for integration with scanners and sorting lines - proven Weinig / Dimter technology for continuous industrial production Condition: very good Note: Technical details may vary depending on the exact machine configuration, control version, handling equipment and installed options.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Dimter / Weinig OptiCut 350 Optimizing Cross-Cut Saw Manufacturer: Dimter / Weinig Model: OptiCut 350 Year of manufacture: 2004 Machine description: For sale: Dimter / Weinig OptiCut 350 optimizing cross-cut saw, year 2004, designed for fast and precise cross-cutting of timber with optimization function. The OptiCut 350 belonged to Dimter’s high-performance series and was used for fixed length cutting, defect cutting and timber yield optimization. The machine is suitable for joinery shops, sawmills, pallet production, furniture components and general industrial timber processing. Depending on configuration, the machine may include optimization software, automatic infeed, loading stations and barcode optimization. Technical data: - Machine type: optimizing cross-cut saw - Maximum cutting height: approx. 120 mm - Maximum working cross section: approx. 235 x 12 mm or 120 x 100 mm - Minimum timber width: approx. 30 mm - Maximum feed speed: up to approx. 350 m/min - Infinitely variable feed: yes - Frequency-controlled cutting speed: yes - Saw motor power: 7.5 kW - Positioning accuracy: approx. 2 mm - Optimization program: yes Ljdeyu Uq Eepfx Aftshi Features and advantages: - High cutting performance - Automatic material positioning - Possibility of yield optimization - Proven Dimter / Weinig technology - Suitable for continuous production - Good solution for industrial timber processing Condition: good Note: Technical details may vary depending on the exact machine configuration, optional equipment, table length and control version.

Condition: new, cutting width max 610 mm Cutting height max 200 mm Saw blade diameter 650 mm Lodpfxsyi Htho Aftjhi Motor output 11 kW

Condition: good (used), Year of construction: 2008, machine/vehicle number: 21100122-F, Offer 25108 Technical Data: Lhsdpfx Afjwq N Swotei - Saw blade dimensions 350 x 3.4 x 32 mm - Saw blade speed 3400 rpm - Cutting range at 90° round 120 mm - or flat 105 x 105 mm - 180 x 70 mm - at 45° round 110 mm - flat 135 x 60 mm - Bevel adjustable left + right 45 ° - Tiltable bevel adjustment of the saw head for ship cuts left - Pneumatic vises - Discharge – roller conveyor with length stop 2000 mm - Feed – roller conveyor 3000 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 600 x H 1730 x D 1200 mm - Weight approx. 180 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, mobile circular saw for cutting bricks with extraction Lhsdpsv Ivx Tsfx Aftoi

Condition: excellent (used), functionality: fully functional, saw blade diameter: 700 mm, saw drive: 7,500 W, operating pressure: 6 bar, disc diameter: 700 mm, Large size carpenter industrial cutting circular saw. Powerful engine: 7,5Kw. 380V. Forward and backward movement is pneumatic. Ledpfxev Ic Iue Aftjhi Height adjustment is electric. La diameter: 700mm.

Condition: good (used), Year of construction: 2005, I sell the automatic pneumatic end cutting saw Weinig Grecon Dimter Opticut 200 Elite Year 2005 Motor power 7,5kW Lhjdpfjxtxg Hex Aftji Input table automatic feeding 5,10m (throughfeed system) Outut table automatic 6 pcs. kickers on left outfeed table Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: excellent (used), IM Very good condition. Lhjdpfx Ajxcll Ujftsi

Condition: new, Bernardo Manual Metal Cut-off Saw CS 315 H Technical Specifications Saw blade diameter 315 x 40 mm Speed 19 / 38 RPM Maximum clamping capacity (open) 150 mm Working height 920 mm Motor output S1 100% 0.75 / 1.5 kW Motor input S6 40% 1.0 / 2.1 kW Voltage 400 V Machine dimensions (W x D x H) 530 x 1000 x 1740 mm Weight approx. 235 kg Solid material, round 90°: 80 mm 45°: 70 mm Pipe, round 90°: 80 mm 45°: 70 mm Profile, square 90°: 80 x 80 mm 45°: 70 x 70 mm Solid material, square 90°: 80 x 80 mm 45°: 70 x 70 mm Profile, rectangular 90°: 90 x 80 mm 45°: 80 x 70 mm Solid material, rectangular 90°: 90 x 80 mm 45°: 80 x 70 mm Features Ljdpfx Asd Id Ugsftehi Gear head for slotting, swivels 90° to the left and right Removable coolant tank integrated in the robust base frame Gearbox with hardened and ground worm shaft and bronze worm gear Safety guard opens automatically during cutting Precise, 4-way guided, self-centering double clamping vice Ergonomically shaped handle with push-button for fatigue-free sawing Low saw blade speed (19 / 38 RPM) ideal for cutting solid materials Reduction gearbox runs quietly in an oil bath Scope of supply Coolant system with filter Self-centering vice Base frame

Condition: new, Hans Schreiner metal bandsaw with pivoting cutter arm, for the professional, Lsdpfxjvrv Dqj Aftshi with soft hydraulic for the correct pressure, electrical coolant system for all kind of metals, steels and Nirosta, quick clamping vice automatic cut stop, the semi-automatic control with preprogrammed cycle (user starts - clamping workpiece - cutting - saw arm resetting - unclamp workpiece) is optional at the MBS370SA for metal worker and workshops with small - and mass serial products. Strengthened frame for more stability. CE conform Motor: 400V,50Hz Reduce gear rate: 25:1 Wheel diameter: 380mm Blade size: 3160x27x0.9mm Blade speed: 34 or 68 m/min Cutting angle: 45°L, 30°L, 15°L, 0°, 15°R, 30°R, 45°R, 60°R Coolant pump: 400V, 50Hz, 3~, 25W Packing size: 1770x765x1120mm Weight: 365 kg

Condition: as good as new (ex-display), Hans Schreiner Metal Bandsaw - Demonstration Machine! Hans Schreiner metal bandsaw with pivoting arm, designed for professionals. Features include smooth hydraulic feed for precise cutting pressure, electric coolant system, suitable for all metals, steels, and stainless steel. Equipped with quick-action vise, automatic cut-off, selectable automatic or manual operation. Comes with stand and reinforced frame for increased stability, CE compliant. Ljdpfx Afjvrvu Aotjhi Technical data: Motor output S6 1900 W (1500 W S6-100% duty cycle), wheel diameter 380 mm, saw blade dimensions 3160 x 27 x 0.9 mm, swivel range 45° left, 60° right, max. cutting capacity at 90°: 370 x 220 mm, cutting speed: 34 / 68 m/min, packaging dimensions (L x W x H): 1770 x 765 x 1120 mm, weight: 365 kg Representative image. Prices subject to change. Errors, misprints and omissions excepted.

Condition: new, Model Name Shark 282 CCS Lsdpfx Asgvkbcoftshi

Condition: new, Model Name Shark 281 SXI evo Lhodpfegvkgljx Aftsi

Condition: new, Model Name Shark 281 CCS Lhsdpfx Asgvkchoftoi

Condition: new, Model Name Lhsdpfx Afjl Sva Ietji SHARK 331-1 NC 5.0 SPIDER

Condition: new, Model Name Shark 332-1 SXI evo Ljdsgvkafepfx Aftshi

Condition: new, Model Name Lhsdpfogvquwsx Aftsi Shark 332-1 CCS

Condition: new, Model Name Lhedpfx Afegvkctotoi Shark 282 SXI evo

Condition: used, Automatic Hacksaw SILISTRA / BULMAK Type OH 254 Hacksaw with material feed Machine No. 862919 Year of manufacture: 1986 Cutting capacity - Round Ø 250 mm Cutting capacity - Square 250 x 250 mm Stroke rates 40 - 50 - 63 - 80 - 100 - 125 strokes/min. Saw blade length 450 mm Motor power 1.5 and 2.2 kW, pole-switchable Electrical connection 380 Volt, 50 Hz - Straight cutting automatic machine designed exclusively for 90° cuts - Saw motor with 2 speeds and 3 V-belt stages - Saw bow with hydraulic lowering and lifting - Hydraulic cutting pressure adjustment via throttle valve - Length stop via manually adjustable fixed stop (electrical contact stop) approx. 800 mm - Vise feed with electric feed drive using leadscrew for automatic material transport Lhjdpfewb Hxvsx Aftoi - Hydraulic material clamping with stepless clamping force adjustment - Coolant unit integrated in machine base - Electrical control cabinet positioned next to the machine Required floor space (L x W x H): 2000 x 1800 x 1400 mm Weight approx. 900 kg