Used Testing for sale (9,575)

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle Laedpfertrzdex Ab Ush (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: used, Universal Static Material Testing Machine AllroundLine with Two Test Spaces Tensile Testing Machine, Compression Testing Machine ZWICK / ROELL Type 1474 / 01 Year of manufacture: 1984 / 2003 Type: 01 . 96255/03 . 112137 Design: Universal Testing Machine Test force: 100 kN (10 t) Test area height: 1460 mm Test area width: 430 mm Ljdpfx Absxantce Ujah Traverse path max.: 1200 mm Test speed max.: 250 mm/min Power supply: 400 Volt, 50 Hz (L1/PE/N) Rated current: 10 A Motor power: 4.4 kW Interface: RS485 - Control system retrofit in 2003 - For tensile, compression, and bending tests on material samples, components, and assemblies - Data output via RS485 - 1 load cell for measuring compressive and tensile forces included. The machine is sold without PC and software; only the installed load cell is included in the scope of delivery. Required floor space (W x D x H): 1150 x 800 x 1960 mm Weight: 820 kg Good condition

Condition: ready for operation (used), Scales: Rockwell/Rockwell Superficial, max. workpiece height: approx. 180mm, max. test depth: approx. 165mm, dwell time: approx. 3s, data output: Digimatic/RS-232-C, machine dimensions X/Y/Z: approx. 250mm/520mm/780mm, weight: approx. 50kg. Documentation available. An on-site inspection is possible. Lodpfxoxc Niwj Ab Uoah

Condition: excellent (used), Zwick/Roell Zwick/Roell 1456 RetroLine Universal Testing Machine 20 kN For sale is a high-quality universal testing machine from the renowned manufacturer ZwickRoell, model 1456 RetroLine, year 2023, with a nominal force of 20 kN. The machine was completely upgraded to state-of-the-art technology as part of the RetroLine modernization and is ready for immediate use. The machine is in very good condition, has been modernized, and complies with all current standards. It is ideally suited for tensile, compression, bending, and shear tests in research, development, and quality assurance. Technical data: Make: ZwickRoell Model: 1456 RetroLine Year of manufacture: 2023 Nominal force: 20 kN Test space dimensions: Height 900 mm, Width 420 mm Drive: Electromechanical spindle drive Speed range: 0.001 – 1000 mm/min (depending on model) Measurement accuracy: ± 1% according to ISO 7500-1, Class 1 (optionally 0.5) Control system: testControl II Software: testXpert III Equipment: Replacement head Cabinet (protective / soundproofing) Evaluation unit included For the ZwickRoell 1456 RetroLine with 20 kN, the approximate values (depending on configuration and equipment, e.g., cabinet, evaluation unit) are as follows: Dimensions Overall height: approx. 1.8 – 2.0 m Width: approx. 600 – 800 mm Depth: approx. 600 – 800 mm Test space (installation height/width): 900 mm × 420 mm Weight: Base machine: approx. 250 – 350 kg With cabinet and evaluation unit: up to approx. 400 – 450 kg Condition: used Scope of delivery: (see picture) - Zwick/Roell 1456 RetroLine testing machine (20 kN) - Protective / soundproofing cabinet - Interface card for force transducer - Operating and technical documentation (PDF & printed) Inspection by arrangement possible. Ljdpjw U N Rtsfx Ab Uoah Shipping or collection by arrangement. (Specifications and technical data subject to change and errors excepted!) Further questions can be answered by phone.

Condition: used, Year of construction: 2001, max. wheel diameter 400/500 mm CNC-Control GE FANUC Series 160i-M pinion diameter - max. 400 mm crown gear diamter max. 500 mm x-axis +/- 70 mm y-axis 200 mm z-axis 200 mm Lajdpfx Abovxwxco Ush axis angle 90 Grad speeds: R T min rated current 30 kVA weight of the machine ca. 6,2 t dimensions of the machine ca. 3,2 x 2,5 x 2,3 m

Condition: excellent (used), Year of construction: 2003, max. wheel diameter 600 mm gear width 700 mm Ledpfswyxycsx Ab Ueah max. module 20 min. module 0,5 table diameter 300 mm x-travel 300 mm y-travel 600 mm z-travel 700 mm workpiece weight 300 kg Control Zeiss max. workpiece diameter 600 mm clamping length 20 - 1000 mm ical angle 90 ° total power requirement 2 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 3,0 x 2,0 x 2,4 m Form measuring machine, gear measuring machine, coordinate measuring machine -> Primar MX 4 WL Suitable for gear shafts, sprocket waves, gears, pistons, gearbox, connecting rods, camshafts and crankshaft, crankshaft housings, cylinder heads, ... Air suspended, centering and tilting table, retention, highly precise execution! Software: gear, roller milling, piston, bowling wheel, crankshaft, connecting rods New software update 2014!

Condition: used, Year of construction: 1999, Technical details: max. wheel diameter: 5 - 260 mm gear width: 400 mm max. module: 15 min. module: 0,5 gear hobbing diameter - internal: 30 mm max. helix angle: > 85 ° Aussenverz. max. helix angle: > 45° Innenverz. Testing Range vertical: 400 mm dist. between centers: 5 - 600 mm table diameter: 260 mm max. table load: 100 kg speeds: 30 1/min total power requirement: 1,6 kVA weight of the machine ca.: 900 kg dimensions of the machine ca.: 200 x 1300 x 2150 mm Lasdpfxjqvcnns Ab Uoh CNC Gear Tester in good condition, out of OEM Test Lab. For measuring of spur and helical toothing, additional of rotationally symetric parts as true running, coaxiality, axial runout, etc. with tool changer ( 4 nos.) *

Condition: used, Static Universal Testing Machine AllroundLine with two test chambers Tensile Testing Machine, Compression Testing Machine ZWICK / ROELL Type AllroundLine Z010 / TH2S Year of manufacture: 1996 Model: BZ010TH2S . 132583/96 . 406678 Design: Benchtop testing machine Test force: 10 kN (1000 kg) Test chamber height: 1458 mm Test chamber width: 440 mm Crosshead speed: mm/min Drive travel resolution: 0.0625 µm Repeatability accuracy: ±2 µm Motor power: 500 W Power supply: 230 Volt, 50 Hz Laedpfxsxanrxs Ab Ush Rated current: 3 A Power consumption: 800 VA Interface: RS485 - For tensile, compression, and bending tests on material specimens, components, and assemblies - Equipped with TH2S control unit (machine controller) - Data output via RS485 - 1 piece load cell for measuring compression and tensile forces, AST Type KAF-W (Angewandte System Technik GmbH, year 2013) The machine is sold without PC and without software, only the described load cell is installed. Space requirement (W x D x H): 1000 x 650 x 1920 mm Weight: approx. 220 kg Good condition

Year of construction: 2025, condition: as good as new (ex-display), Stand-alone machine, max. testing force 200 kN, most modern WINDOWS software (freely programmable test sequences), over 600 finished test results, Machine price WITHOUT clamping device as the final equipment is based on your requirements: included in the price: - Machine in working order - incl. load cell 200 kN (grade 05 from 2000 - 200,000 / grade 1 from 400 - 2000 N - Warranty 24 months - Software LabTest - meets and exceeds all expectations - without clamping tool - without delivery (distance-dependent) - incl. DAkkS (DKD) calibration Optional: - Mechanical clamping device - Hydraulic clamping tool - Bending tools - Druckplatten plates - Clip-on extensometer - Probe arm extensometer - Video extensometer - Laser speckle extensometer Lajdjcyamwjpfx Ab Ush - Climate chambers - High temperature / hot draft furnaces ... just everything that is necessary for mechanical material testing up to the LASER TECH (optical laser speckle strain gauge for non-contact strain measurement of metal, plastic ... Ask also for other sizes. We offer new machines on the quality level of the market leader at prices of used machines.

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a high-quality materials testing machine, model Zwick/Roell Z010 TN ProLine (BT1FB010TN.D30), supplied with comprehensive equipment. This system is ideally suited for tensile, compression, bending, and component tests and is offered with original Zwick software, accessories, and safety screen. Complete system Including safety screen (CE-compliant, with electric interlock) Comprehensive accessories and software included Technical data of the testing machine: Model: Z010 TN ProLine, nominal force 10 kN Test area (W x H): 440 x 1050 mm Testing speed: 0.001 – 1000 mm/min, continuous up to nominal force High-precision guidance, very low noise emission High-resolution, maintenance-free DC motor Lasdpfsw Uifdjx Ab Uoh Electrical connection adjustable in 6 voltage ranges Including interface card for force transducer (additional slot available for expansions) Expandable with options and modules Safety – Safety screen (included in delivery): Suitable for ProLine Z005TN, Z010TN, Z020TN With electric interlock and additional manual locking Makrolon pane, 6 mm thick, pivoting (hinged left) CE-compliant Mandatory for applications with risk of operator injury Force transducer: Xforce HP force transducer, nominal force 10 kN Accuracy class: 1 from 20 N, 0.5 from 100 N (according to ISO 7500-1) Extremely good linearity (

Year of construction: 2017, condition: used, functionality: fully functional, II. TEMPERED GLASS STRESS MEASUREMENT DEVICE TYPE JF-1 (GLASS SURFACE STRESS METER TYPE JF-1). The JF-1 device is designed for quality control of tempered glass by means of non-invasive measurement of external surface stresses. The complete set includes: PDA display, optical head, power supply, UV sensor, refractive fluid, USB cable, reference sample, software, and user manual. Additionally, 50 ml of refractive fluid is included. Condition: used, functional. Lajdpjw T Rq Ssfx Ab Ujh

Condition: excellent (used), max. wheel diameter 200 mm gear width 300 mm module 0,5 - 25 centre distance 750 mm weight of the machine ca. 0,2 t dimensions of the machine ca. 0,8 x 0,6 x 0,6 m Lasdpfx Abow Ny Ulo Ueh worm testing roll-machine

Year of construction: 2009, condition: not inspected (used), Test bench DTB 2 Year of manufacture 2009 disassembled Lasdpekvn R Rsfx Ab Ujh The offer is directed exclusively to traders in the sense of § 14 BGB (German Civil Code). No sale to private individuals!

Condition: good (used), Year of construction: 2005, functionality: fully functional, (2x) Climate chamber for stability tests The system for storing stability samples consists of 2 climate chambers. 2 climate chambers are supplied by an electrical control cabinet and have separate circuit diagrams. The climate chambers are based on cooling cells from Viessmann. The climate chambers are dimensionally identical and equipped with stainless steel shelves. The climate chambers were connected to a measured value recording system. This is currently not available for the system. However, a connection to a building management system is basically possible and prepared. The entire system was taken out of service in 2024 and finally qualified. The qualification documents can be made available on request. The delivery and installation of the system as well as the technical service were carried out exclusively by ThermoTEC. The client offers the objects mentioned EXW Ex Works "ex works". This means that the dismantling and loading of the objects is the responsibility of the buyer. The system essentially consists of: 2 constant climate chambers made of 80mm PU elements, stainless steel floor and single-leaf revolving door with frame heating 2 chamber fittings for air conditioning consisting of: -Fans for circulating the chamber air -Direct evaporation register with refrigerant R404A, for cooling and dehumidification -Electric resistance heating 2*1.5kW Cold steam inlet hoses from the ultrasonic humidifier 2 air-cooled refrigeration condenser units for cooling and dehumidifying the climate chambers. 2 ultrasonic humidifiers with an output of 1kg/h Switch cabinet for controlling and regulating the climate chambers Lasdpovpu Tlsfx Ab Ush The circulating air of the constant climate chambers is sucked in via the air conditioning unit, processed and blown out via the front. The temperature and humidity sensor mounted in the intake area transmits the actual values of the test room to the respective control circuit of the climate chambers. An independent process controller is installed in the control cabinet front for each control circuit (temperature/humidity). The controllers control the following functions as required: > HEATING with electric resistance heating > COOLING with refrigeration unit and direct evaporation > HUMIDIFICATION with ultrasonic humidifier > DEHUMIDIFICATION with refrigeration unit and direct evaporation The climate chamber temperature and humidity are controlled automatically. Cell type: Tecto cooling and deep-freezing cell Standard WL80 VIESSMANN Dimensions of the climate chambers (KK) 2 each: Outside (WxDxH): 2100 x 3000 x 2310 mm Door dimensions (WxH): 800 x 2000 mm Inside (WxDxH): 1940 x 2840 x 2140 mm Climate chamber 1 25°C/60%RH - A0429_00 - Year of construction: 2005 Climate chamber 2 25°C/60%RH - A0430_00 - Year of construction: 2005

Year of construction: 2025, condition: as good as new (ex-display), Max. testing force 50 kN, actual WINDOWS software (free programmable testing procedure) more than 600 ready prepared testing results (demo machine for special price) The machine state is as new. Price of machine is without clamping heads (shown on the photo) because this equipment will be delivered as option according to your requirements. Price includes: - Machine 100 % functional - incl. load cell 50 kN (quality class 0.5 from 500 - 50000 N) - warranty 24 month - software LabTest - unique performance - without clamping heads (as option) - without costs for delivery (depending on distance) - incl. Setup, training and DAkkS calibration Ljdsptcmopfx Ab Ujah Optional: - clamping heads - bending support - compression plates - extensometer - climatic chamber Even everything for to perform standard test procedures or according to you company requirements up to high performance testing equipment like MICRON LASER SPECKLE (optical Laser Speckle extensometer for non contact measuring of elongation for metal, plastic and other... Please ask for different machines with higher / lower forces, special equipment or applications: We offer new machines with highest quality and best price ratio at fair prices!

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Laodpfjw Uf Uzjx Ab Uoh Z0.05 Type: BT1-FRO.5TS.D14 with testXpert II V3.0 software Zwick/Roell zwicki Z0.5 TS Materials Testing Machine 0.5 kN Professional materials testing machine for tensile, compression, flexure, and component testing. Fully equipped with testControl electronics, testXpert II software, accessories, and PC workstation. Technical specifications of the testing device Model: zwicki Z0.5 TS Rated force: 0.5 kN (500 N) Max. test space height: 573 mm Test speed: 0.001 – 2000 mm/min (optionally up to 3000 mm/min) Online machine compliance correction for maximum accuracy Adaptive controller for force and strain control High precision and real-time data processing Modular expandability: 2 module slots (optionally up to 4) Clamping range flexibly adjustable Xforce P force transducer Type: Precision Rated force: 500 N Accuracy class 1 as per ISO 7500-1 from 2 N Accuracy class 0.5 from 10 N Insensitive to lateral forces, bending/torsion moments Rugged design, overloadable up to 150% of rated force Incl. calibration certificate according to ISO 7500-1 Software – testXpert II Includes basic program in German Easy operation on Windows XP/Vista (compatible with standard PCs) Integrated simulation mode (Virtual Testing Machine) Statistical analysis & tolerance monitoring Accessories Unit for tack-loop test Fmax 500 N Fixture for adhesive tapes Glass plate 25 x 30 mm (FINAT Test No. 9) incl. mount Screw specimen holder Type GRS500 PL Fmax 500 N Max. opening width 21 mm Incl. Vulkollan jaws, Ø 32 mm PC & Workstation HP DC7800 Midi Tower incl. Windows XP Pro (German) Intel Core 2 Duo E6750, 2 GB RAM, 160 GB HDD DVD drive, Gigabit Ethernet, multiple USB/serial ports 19" LCD monitor (1280 x 1024), keyboard & mouse testXpert II software preinstalled Dimensions (W x D x H): approx. 450 × 450 × 1200 mm Weight: approx. 60 kg (without PC and accessories) Condition: used Scope of delivery: (see image) Zwick/Roell zwicki Z0.5 TS materials testing machine (0.5 kN) Xforce P force transducer (500 N, incl. calibration certificate) testXpert II software (basic program, German) Accessories: tack-loop test unit, glass plate with mount, screw specimen holder GRS500 PL PC workstation with monitor, keyboard, and mouse Documentation in German (Specifications and details subject to change and errors!) We are happy to answer further questions by phone.

Year of construction: 2018, condition: good (used), Testing equipment used to ensure the quality and production output in a serial process for gearboxes assembly plant. Equipment contains universal robot, camera system and his own control unit. Equipment could be relearned in order to ensure the demanded operations of the client. Lajdpjh D Ezgsfx Ab Ujh

Year of construction: 2025, condition: new, Max. testing force 5 kN, actual WINDOWS software (free programmable testing procedure) more than 600 ready prepared testing results - demo machine for special price The machine state is as new. Price of machine is without clamping heads (shown on the photo) because this equipment will be delivered as option according to your requirements. Price includes: - Machine 100 % functional - incl. load cell 5 kN (quality class 0.5 from 50 - 5000 N) - warranty 24 month - software Graphwork 6 (actual) - without clamping heads (as option) - without costs for delivery (depending on distance) - incl. setup, training Optional: - clamping heads - bending support - compression plates - extensometer - climatic chamber Ljdpfx Abodb Nfpj Ueah Even everything for to perform standard test procedures or according to you company requirements up to high performance testing equipment like MICRON LASER SPECKLE (optical Laser Speckle extensometer for non contact measuring of elongation for metal, plastic and other... Please ask for different machines with higher / lower forces, special equipment or applications: We offer new machines with highest quality and best price ratio at fair prices! Photos shows machine with optional equipment!

Condition: excellent (used), Liebisch Type: K1000 M-TR / 4203.6101 USED Liebisch K1000 M-TR Constacon – Manual Chest-Type Apparatus Corrosion/Condensation Test Chamber (Chamber volume: 1000 l) Item Description: For sale is a used Liebisch K1000 M-TR, a robust and high-quality chest-type unit designed for conducting condensation water tests. Ideally suited for laboratories, quality control, or industrial applications. Technical Specifications & Features: Model Variant: Constacon K 1000 M-TR – Condensation Water Unit without Ventilation Chamber volume: approx. 1000 liters Operation mode: Manual (Type M-TR) External dimensions (W x D x H): Lodpow Tbdpofx Ab Ueah 2600 × 1120 × 1210 mm Internal chamber dimensions (W x D x H): 1535–1425 × 800–780 × 660–650 mm Testing standards: For condensation (Constacon): DIN 50958, DIN EN ISO 6270-1/-2 Control: Simple manual control panel – parameters such as temperature and operation mode are set directly on the device. Temperature regulation: PID controlled, typical setpoints: Condensation tests: approx. 40 °C (up to max. 50 °C) Heating time: approx. 1 hour Weight: approx. 400 kg Condition: used Scope of delivery: (see picture) (Specifications and information are subject to change and error!) For further questions, we are happy to assist you by phone.

Year of construction: 2025, condition: as good as new (ex-display), Max. testing force 10 kN, actual WINDOWS software (free programmable testing procedure) more than 600 ready prepared testing results - demo machine for special price The machine state is as new. Price of machine is without clamping heads (shown on the photo) because this equipment will be delivered as option according to your requirements. Price includes: - Machine 100 % functional - incl. load cell 10 kN (quality class 0.5 from 100 - 10000 N) - warranty 24 month - Software LabTest - unsurpassed flexibility, meets and exceeds your expectations - without clamping heads (as option) - without costs for delivery (depending on distance) - incl. setup, training Optional: - clamping heads - bending support - compression plates - extensometer - climatic chamber Even everything for to perform standard test procedures or according to you company requirements up to high performance testing equipment like MICRON LASER SPECKLE (optical Laser Speckle extensometer for non contact measuring of elongation for metal, plastic and other... Laodpjdb Nf Iofx Ab Ujh Please ask for different machines with higher / lower forces, special equipment or applications: We offer new machines with highest quality and best price ratio at fair prices! Photos shows machine with optional equipment!

Condition: used, Hanau Heraeus Original Hanau Suntest CPS+ – Light Aging Tester for Material Testing Description: Laodpsw S Tttjfx Ab Ueh For sale is an original Hanau Suntest CPS+, a professional device for artificial aging and weathering of materials. Ideal for plastics, coatings, textiles, or packaging materials in laboratories or testing institutes. Technical Highlights: • Xenon arc lamp for realistic sunlight simulation • Adjustable irradiance: 250–765 W/m² • Black standard temperature control (BST) up to approx. 100°C • Programmable test cycles with light/dark phases • Measurement & control: TCT display, RS-232 interface for data transfer • Integrated air cooling, compact laboratory size: approx. 780 × 350 × 350 mm • Ideal for laboratories, research, and development • Precise, repeatable test results. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, information is subject to confirmation!) If you have further questions, we are happy to answer them by phone.

Year of construction: 2025, condition: as good as new (ex-display), Max. Test force 100 kN, most modern WINDOWS software (freely programmable test sequences), over 600 finished test results, machine price WITHOUT clamping device - final equipment according to your requirements Included in the price: - machine in working order - incl. load cell 100 kN (grade 05 from 1000 - 100,000 / grade 1 from 200 - 1000 N - warranty 24 months - Software LabTest - unsurpassed flexibility, complete software (!) - without clamping tool - without delivery (distance-dependent) Lsdocxwq Repfx Ab Uoah - incl. DAkkS (DKD) calibration Optional: - mechanical clamping device - hydraulic clamping tool - bending tools - compression plates - clip-on extensometer - probe arm extensometer - video extensometer - laser speckle extensometer - climate chambers - high temperature furnaces ... just everything that is necessary for mechanical material testing up to the LASER TECH (optical laser speckle strain gauge for non-contact strain measurement of metal, plastic ... Ask also for other sizes. We offer new machines on the quality level of the market leader at prices of used machines.

Condition: excellent (used), Zwick Type: BT1-FR050TH.A1K 50 kN Universal Testing Machine Zwick/Roell BT1-FR050TH.A1K Material Testing Machine – Precise Strain Gauge Testing Lsdpfxow S Hvzo Ab Ujah Note: PC not included!! Highlights: - Test force: 50 kN (tension/compression) - High-precision TC-MODCSCC module for strain gauge load cells (4- & 6-wire) - Measuring range: 0.2 – 165% of nominal value, data acquisition up to 500 Hz - Maximum resolution: up to 297,000 points (at 50 Hz) - Positioning repeatability: ±10 µm - Crosshead speed: 0.0005 – 600 mm/min - Robust construction - Compact dimensions: 1,814–2,688 mm height, 936 mm width, 722 mm depth - Low noise: 59 dB(A) - Ambient conditions: +10 to +35 °C, humidity 20–90% Special features: - Ideal for research, development, or industrial material testing Dimensions & weight: Load frame: - Test force (tension/compression): 50 kN - Load frame height: 1,714 mm - Overall height: 1,814 – 2,688 mm - Load frame width: 760 mm - Overall width: 936 mm - Load frame depth: 477 mm - Overall depth: 722 mm Weight: - With electronic unit: 230 kg - With typical accessories: approx. 300 kg Condition: used Scope of delivery: (see picture) - ZwickRoell BT1-FR050TH.A1K testing machine - Operating manual (Specifications are subject to change and errors excepted!) If you have any questions, we are happy to answer them by phone.

Year of construction: 2025, condition: as good as new (ex-display), QUASAR 1200 kN tensile testing machine / universal testing machine most modern WINDOWS software (freely programmable test procedures), over 600 finished test results, machine price WITHOUT clamping device - final equipment according to your requirements Included in the price: - Machine in working order - incl. load cell 1200 kN (grade 05 from 1000 - 100,000 / grade 1 from 200 - 1000 N - Warranty 24 months - Software LabTest - unsurpassed flexibility, complete software (!) - without clamping tool - without delivery (distance-dependent) - incl. DAkkS (DKD) calibration Optional: - Mechanical clamping device - Hydraulic clamping tool Lsdpfjdb Ndcjx Ab Uoah - Bending tools - comression plates - Clip-on extensometer - Probe arm extensometer - Video extensometer - Laser speckle extensometer - Climate chambers - High temperature furnaces ... just everything that is necessary for mechanical material testing up to the LASER TECH (optical laser speckle strain gauge for non-contact strain measurement of metal, plastic ... Ask also for other sizes. We offer new machines on the quality level of the market leader at prices of used machines.

Condition: good (used), Zwick Type: BT2-FZ0.5TS.D16 500 N + Xforce P 500N Materials Testing Machine Test force in tension/compression: 500 N Overall height, without head traverse: 789 mm Overall width: 411 mm Overall depth: 622 mm Footprint: Net standing area: 0.008 m² Load frame base area: 0.196 m² Specific floor load: Based on typical equipment: 0.85 kg/cm² With 50% safety margin: 1.28 kg/cm² Ceiling load: Based on typical equipment: 97 kN/cm² With 50% safety margin: 146 kN/cm² Working space depth: 105 mm Working space height with upper mounting bracket: Minimum height: 235 mm Maximum height: 565 mm Working space height with lower mounting bracket: Laodjw Ib Uwjpfx Ab Ujh Minimum height: 90 mm Maximum height: 420 mm Weight: approx. 78 kg with extras Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and specifications are reserved!) We are happy to answer further questions by phone.