Used Testing for sale (9,575)

Condition: used, functionality: fully functional, overall weight: 30 kg, color: silver, working width: 1,200 mm, Dimensions: 1170x1170x86 Lodpowkgn Ajfx Ab Usah

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg Lasdeg Ezaropfx Ab Ueh 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: good (used), Year of construction: 2013, Helium leak detector Lsdpfxot Uru Te Ab Ujah Manufacturer: Leybold Type: Phoenix L300i Condition: very good! Connection: 230V Delivery time: ex stock (u.ü.V.)

Condition: ready for operation (used), Condition Used This listing is for a two stacked BD Phoenix M50 Automated Identification Susceptibility Testing Instrument The BD Phoenix™ M50 instrument provides accurate and timely identification and susceptibility results to guide appropriate therapy and patient management decisions. The system can hold up to 50 panels at a time and can be stacked to maximize limited laboratory space. AST Panels have up to 29 antibiotics on a single panel to reduce offline testing and provide a true MIC value based on current CLSI breakpoint standards. It has demonstrated performance in detecting emerging resistance. It incorporates the use of an oxidation reduction indicator, turbidometric growth detection, full on-panel antimicrobial concentrations and the BDXpert™ System. Together these make up the Phoenix Susceptibility System resulting in rapid, accurate and reliable antimicrobial susceptibility results. These results are further enhanced by specific delayed resistance features, providing additional assurance that Phoenix results are not only rapid but accurate. The inclusion of all reported antimicrobial concentrations on the panel provides the foundation for detection of emerging resistance. Ledjrwbhuepfx Ab Ujah Two Stacked BD Phoenix M50 Instruments with PC specifiations: Height: 42 in (107 cm) Width: 53.5 in (136 cm) Depth: 30 in (76.5 cm) Clearance (left): 3 in (7.62 cm) Clearance (right): 18 in (45.72 cm) Weight: 240 lb (109 kg) Power requirements: 90-264 VAC; 47-63 Hz 15 amp circuit

Condition: refurbished (used), functionality: fully functional, The Klingelnberg PKE 300 H (PSKE 900) bevel gear testing machine was designed as a universal machine for the flexible machining of gears and is used for single flank rolling tests on bevel gears with evaluation Picture shows machine in actual condition as retrofit / modernized. Lsdpfx Astncnhsb Ueah Performance description: Wheel diameter: 450 (300) mm Axle angle: 90 degrees Hypoid: +/- 60 mm Space requirement approx.: 1.4 x 0.8 x 1.5 mm Machine weight approx.: 1,100 kg Further information on possible options, current purchase price on request. *Information, dates are non-binding, subject to prior sale

Year of construction: 2009, condition: defective spare-parts repository (used), Sale as spare parts warehouse Laedpsqgb H Dsfx Ab Ujh

Condition: like new (used), Year of construction: 2022, Helium leak detector Manufacturer: Leybold Type: Phoenix Quadro EU Condition: As good as new Ready for use from 2022 unused Connection: 230V Ljdpfxot Urlre Ab Usah Delivery time: ex stock (u.ü.V.)

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: S-280-09.980.004, saw blade diameter: 300 mm, cutting length (max.): 5,300 mm, cutting height (max.): 2,200 mm, cutting depth: 80 mm, Equipment: scorer, TECHNICAL DETAILS Cutting Data Vertical cutting height: 2,200 mm Horizontal cutting height: 2,100 mm Cutting length: 5,300 mm Cutting depth: 80 mm Saw blade diameter: 300 mm Extraction connection: 160 mm MACHINE DETAILS Laodpexnx Aqefx Ab Ueh Dimensions (L x W x H): 7,300 x 1,500 x 3,150 mm Motor power: 5.5 kW Motor voltage: 3 × 400 V EQUIPMENT - Automatic horizontal feed - Automatic vertical feed - Horizontal positioning control - Welded frame with high rigidity - Pneumatically retracting support grid - Stable latching of the saw unit at top and bottom - Retractable riving knife for cutouts - Control panel at eye level - Digital display on longitudinal stop - Roller conveyor system - Scoring unit - Workpiece-supporting bed - Extraction unit TRK - ECO version with pneumatic extraction duct control - Touch screen - Dust tested

Condition: new, functionality: fully functional, Year of construction: 2025, A sand aggregate or gravel production plant is a facility where raw materials like sand, gravel, and other aggregates are processed to create various products used in construction and other industries. These facilities typically involve a series of processes to transform raw materials into the final products. Here is a general overview of the key components and processes involved in a sand aggregate or gravel production plant: 1. Mining and Extraction: - The process starts with the extraction of raw materials from quarries or mines. Heavy machinery such as excavators, loaders, and bulldozers are used to remove the raw materials from the earth. 2. Crushing and Screening: Ljdjq Nia Ispfx Ab Ueah - The extracted raw materials often need to go through crushing and screening processes to reduce their size and separate them into different grades. - Crushers break down large rocks into smaller pieces, and screens sort the particles based on size. 3. Washing: - Washing is a common process to remove impurities such as clay, silt, and dust from the raw materials. This is particularly important for sand and gravel used in construction. 4. Grading and Sorting: - After washing, the materials may go through grading and sorting processes to separate them into different sizes and qualities. 5. Storage and Stockpiling: - Processed materials are often stored in stockpiles for further use. Adequate storage facilities are necessary to manage different grades of materials. 6. Conveying and Transportation: - Conveyor systems are used to transport materials between different stages of the production process. Transportation methods, such as trucks or conveyor belts, are used to move the final products to distribution points. 7. Quality Control: - Quality control measures are implemented to ensure that the final products meet the required specifications and standards. This may involve regular testing and analysis of the materials. 8. Environmental Considerations: - Sustainable practices and environmental considerations are crucial in the operation of a production plant. Measures such as dust control, water recycling, and rehabilitation of mined areas are often implemented to minimize the environmental impact. 9. Maintenance and Safety: - Regular maintenance of equipment is essential for the smooth operation of the plant. Safety measures are also critical to protect workers and ensure compliance with regulations. 10. Final Product: - The final products from a sand aggregate or gravel production plant may include various grades of sand, gravel, crushed stone, or other types of aggregates used in construction, concrete production, asphalt production, and other applications. It's important to note that the specific processes and equipment used in a production plant may vary based on the type of raw materials, the intended final products, and local regulations. Additionally, advancements in technology and sustainability practices may influence the design and operation of such facilities.

Condition: like new (used), Year of construction: 2021, WEISS Ltd. used / tested CR heavy duty table with servo amplifier B&R 8V1180.00-2 EXTREME LOADABLE, FOR HORIZONTAL AND VERTICAL 585Kg axial runout : 0,02 mm Radial runout : 0,02 mm Center opening : 346 mm max. dynamic axial force : 70000 N Lsdepa Nz Djpfx Ab Uoah B&R: 8V1180.00-2 Modular mechanical design by plug-in modules Integrated mains filter Integrated or optional external braking resistor All connections in pluggable design Integrated electronic restart interlock ACOPOS servo drive, 3x 400-480 V, 19 A, 9 kW, line filter, braking resistor, DC link power supply and electronic safe restart interlock integrated

Condition: like new (used), functionality: fully functional, SICK C2000 C20S-045102A11 Sensor Lightning Ljdpfxou Rqybs Ab Ujah Small and compact, economical and convenient The C2000 Standard safety light curtain is used wherever hazardous points and hazardous areas need to be safeguarded reliably and economically. C2000 is designed for use in simple applications with low hazard potential - its robust design and high signal reserve are also suitable for use in harsh environmental conditions. The integrated EDM (External Device Monitoring) function enables cost savings in system design and offers the advantage of on-site display. Time-saving alignment and diagnostics are carried out using the tried-and-tested 7-segment display. In addition, sens:Control devices, accessories and service concepts round off the product range and form industry-compatible solutions as a complete package.

Condition: new, functionality: fully functional, Year of construction: 2025, Aggregate and ballast crusher equipment are used in the crushing and processing of various materials for construction and infrastructure projects. These crushers are designed to break down large rocks, gravel, or stones into smaller pieces, producing aggregates and ballast that are essential components in the construction industry. Here are some key aspects related to aggregate and ballast crusher equipment: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing in aggregate and ballast production. They operate by compressing the material between a stationary and a movable jaw. 2. Impact Crusher: - Impact crushers are suitable for shaping and producing fine aggregates. They use impact force to crush the material, making them suitable for various types of rock and ore. 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They are efficient for producing well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They use the "rock-on-rock" crushing principle, where rocks are fed into the rotor to be accelerated and crushed against the stationary anvils. 5. Gyratory Crusher: - Gyratory crushers are primarily used in mining, but they may also be used in the production of aggregates. They have a conical head and a concave surface, which crushes the material between the head and concave. Ljdpfsq Nxrxsx Ab Ueah 6. Mobile Crushers: - Mobile crushers, including mobile jaw crushers and mobile impact crushers, provide flexibility and mobility for on-site crushing of aggregates and ballast. They are often used in construction projects where materials need to be processed directly at the job site. 7. Screens and Scalpers: - Screens and scalpers are used to separate different sizes of aggregates after the initial crushing stage. Vibrating screens are commonly employed to classify and separate materials based on size. 8. Conveyors: - Conveyors are crucial for transporting materials between various stages of the crushing process and for stockpiling the final products. They enhance efficiency in material handling. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. These systems may include water sprays or chemical suppressants. 10. Quality Control: - Quality control measures, such as particle size analysis and gradation testing, are essential to ensure that the produced aggregates and ballast meet the required specifications and standards. 11. Environmental Considerations: - Crusher equipment should adhere to environmental regulations, and measures like dust control, noise reduction, and proper waste disposal should be implemented. When selecting aggregate and ballast crusher equipment, factors such as the type of material, required product size, production capacity, and mobility requirements should be taken into consideration. Additionally, adherence to safety and environmental standards is crucial in the operation of crushing equipment.

Condition: excellent (used), Year of construction: 2015, KUKA used / tested Operating hours: 22528,28h Maximum reach 2696 mm Nominal payload 90 kg Nominal additional load carousel / swing arm / arm 0 kg / 0 kg / 50 kg Nominal total load 140 kg Position repeatability (ISO 9283) ± 0.06 mm Number of axes 6 Installation position floor Installation area 830 mm x 830 mm Range of motion A1 ±185 ° A2 -140 ° / -5 ° A3 -120 ° / 155 ° A4 ±350 ° A5 ±125 ° A6 ±350 ° Speed at nominal load A1 136 °/s A2 130 °/s A3 120 °/s A4 292 °/s A5 258 °/s A6 284 °/s With KRC4 control, connecting cable (00-215-536 / 00-182-465) and Smartpad (00-188-334) X11 and X13 connector extension Current Software version: V8.3.14 Software options: -Boradpackage -Gripper & Spot-Tech -LoadDataDetermination -Profinet KRC-nexxt -RemoteService Laodpfx Abepxm Eij Ueh -SafeOperation -UserTech

Condition: new, Year of construction: 2025, power: 7.5 kW (10.20 HP), Batch ball mills find applications in various industries where the processing of materials in discrete batches is required. The versatility of batch ball mills makes them suitable for a range of applications. Here are some common batch ball mill applications: 1. Ceramics Industry: - *Glaze Preparation:* Batch ball mills are extensively used in the ceramics industry for preparing glazes. Raw materials such as feldspar, quartz, and clay are ground with ceramic balls to achieve the desired particle size for glaze formulation. 2. Chemical Industry: - *Material Grinding:* Batch ball mills are used for grinding and blending various chemical materials. This includes the production of pigments, dyes, and other specialty chemicals where precise particle size control is crucial. 3. Pharmaceuticals: - *Drug Formulation:* In pharmaceutical manufacturing, batch ball mills are used for grinding and blending powders to create drug formulations. The controlled environment provided by these mills is essential for maintaining the integrity of pharmaceutical compounds. 4. Food Industry: - *Ingredient Mixing:* Batch ball mills may find application in the food industry for mixing and grinding ingredients. This can include the production of food additives, flavorings, and other powdered or granular products. 5. Mining and Minerals Processing: - *Ore Grinding:* Batch ball mills are used in mining and minerals processing for grinding minerals and ores. The controlled grinding helps in obtaining the desired particle size for subsequent processes, such as mineral separation or extraction. Lasdsq I N H Nepfx Ab Ujh 6. Paints and Coatings: - *Pigment Dispersion:* In the paints and coatings industry, batch ball mills are employed for dispersing pigments into paint formulations. Achieving a uniform particle size is crucial for the quality and appearance of the final coating. 7. Building Materials: - *Raw Material Grinding:* Batch ball mills are used in the preparation of raw materials for the production of building materials, such as cement and concrete. Grinding of materials like limestone and clay helps in obtaining the desired fineness for subsequent processes. 8. Electronic Materials: - *Ceramic Powder Processing:* In the electronics industry, batch ball mills can be employed for processing ceramic powders used in the production of electronic components and insulating materials. 9. Research and Development: - *Material Testing:* Batch ball mills are often used in research and development laboratories for testing and optimizing material formulations. They provide a controlled environment for small-scale processing and experimentation. 10. Customized Applications: - *Specialized Processes:* Batch ball mills can be adapted for various specialized processes in different industries where precise grinding and mixing are required. Custom modifications can be made based on specific application requirements. When using a batch ball mill, it's important to consider factors such as the type of material being processed, desired particle size, and the specific requirements of the end product. Additionally, following the manufacturer's guidelines and maintaining proper operating conditions are essential for efficient and effective milling processes.

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 494391, Specification: Capacity: 2000L Operating pressure PS min: 0 bar Lajdpswrhxljfx Ab Ush Operating pressure PS max: 11 bar Test pressure PT: 16 bar Operating temperature T min: -10°C Operating temperature T max: +50°C The compressed air tank from OKS Otto Klein GmbH is a reliable solution for storing and maintaining pressure of compressed air in industrial systems. It is designed to ensure stable pressure supply and thus supports the smooth operation of various pneumatic systems. The robust design ensures durability and safety in daily use, while the easy handling allows seamless integration into existing systems.

Condition: new, Year of construction: 2025, A sand aggregate production plant is a facility where various types of aggregates (such as sand, gravel, crushed stone, or recycled concrete) are produced for use in construction and other applications. These plants typically include various stages of processing, from raw material extraction to the final product. Here are the key components and processes typically involved in a sand aggregate production plant: 1. Raw Material Extraction: - Quarrying or Mining: Aggregates are often extracted from quarries, mines, or riverbeds. Depending on the type of aggregate, the extraction process may involve drilling, blasting, or dredging. 2. Primary Crushing: - Jaw Crusher or Gyratory Crusher: The extracted raw material is usually transported to the plant and fed into a primary crusher, where large rocks are broken down into smaller pieces. 3. Secondary Crushing: - Cone Crusher or Impact Crusher: The crushed material from the primary crusher may undergo further reduction in size through secondary crushing. 4. Screening: - Vibrating Screens: After crushing, the material is often screened to separate different sizes of aggregates. This process ensures that the final product meets the required specifications. 5. Washing: - Sand Washers: In some cases, especially for sand production, washing is done to remove impurities, clay, and fines from the aggregates, ensuring a cleaner and higher-quality product. 6. Grading and Sorting: - Classifiers or Graders: After washing and screening, the aggregates may go through additional processes to separate them based on size or quality. 7. Stockpiling: - Stockpiles: The final aggregates are usually stockpiled for storage before being transported to construction sites or other end-users. Laodpfx Asq Ngb Djb Uoh 8. Aggregate Storage and Handling: - Storage Bins or Silos: Larger production plants may have storage facilities, such as bins or silos, to store different types and sizes of aggregates before distribution. 9. Quality Control: - Laboratory Testing: Regular quality control testing is performed on aggregates to ensure they meet specifications for strength, size, gradation, and other properties. 10. Environmental Considerations: - Water Management: Some plants incorporate water management systems to recycle and reuse water used in the washing process, minimizing environmental impact. 11. Transportation: - Conveyors or Trucks: Aggregates are typically transported from the production plant to construction sites by conveyors, trucks, or other means.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 20,684 h, machine/vehicle number: 6640-105413, ABB used / tested IRB6640-180/2.55 M2004 1310Kg with IRC5 M2004 control unit 150Kg Load capacity: 180Kg Reach: 2550mm Connection cable: 3HAC041639-001 / 3HAC2493-1 Year of construction: 2013-12-16 Lsdjq A H U Hopfx Ab Ueah Operating hours: 20684h Options: 644-2 German; 711-1 Profibus DP m/s ; 608-1 World Zones ; 611-1 Path recovery ; 613-1 Collision Detection ; 623-1 Multitasking

Condition: excellent (used), Year of construction: 2008, We offer here a used and tested tested KUKA KR60 jet Robot built in 2008. The robot is fully functional and is equipped with a KRC2 ED05 controller. Ljdpolp Ip Tofx Ab Ueah In addition to the robot itself, there are 6 columns of 3,000mm height and the linear guide with approx. 24 meters.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2600-109101 / Schaltschrank: 6700-101707, overall weight: 550 kg, load capacity: 12 kg, controller manufacturer: ABB, controller model: IRC5 M2004, input voltage: 400 V, input current: 20 A, ABB IRB 2600 industrial robot incl. control cabinet & control panel, IRB 2600-12 / 1.85 Year of construction 09.2017. Laedoucx Hdjpfx Ab Ueh Axes: 6, Payload: 12 kg. Total weight: 550 kg (400 kg robot arm + 150 kg control cabinet). Control cabinet: ABB IRC5 M2004. Year of construction: 11.2014 Used, complete, very good condition, tested and can be demonstrated. (See type plates for further details). We also offer accessories such as bases, spot-welding guns, rotary tables and much more. We are also happy to demonstrate the robot. Packaging and loading included.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2600-107872, overall weight: 1,000 kg, load capacity: 12 kg, controller manufacturer: ABB, controller model: IRC5 Single, input voltage: 400 V, input current: 9 A, ABB IRB 2600 industrial robot incl. control cabinet & control panel, IRB 2600-12 / 1.85 Year of construction 03.2017. Axes: 6, Load capacity: 12 kg. Total weight: 1,000 kg (850 kg robot arm incl. base + 150 kg control cabinet). Control cabinet: ABB IRC5 Single. Used, complete, very good condition, tested and can be demonstrated. (For further details see type plates). We also offer accessories such as bases, spot-welding guns, rotary tables and much more. We are also happy to demonstrate the robot. Lajdpfxjucxx Hs Ab Uoh Packaging and loading included.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2600-107870, overall weight: 1,000 kg, load capacity: 12 kg, controller manufacturer: ABB, controller model: IRC5 Single, input voltage: 400 V, input current: 9 A, ABB IRB 2600 industrial robot incl. control cabinet & control panel, IRB 2600-12 / 1.85 Year of construction 03.2017. Axes: 6, Load capacity: 12 kg. Total weight: 1,000 kg (850 kg robot arm incl. base + 150 kg control cabinet). Control cabinet: ABB IRC5 Single. Used, complete, very good condition, tested and can be demonstrated. (For further details see type plates). Lodpfx Ajucxubeb Ueah We also offer accessories such as bases, spot-welding guns, rotary tables and much more. We are also happy to demonstrate the robot. Packaging and loading included.

Condition: reconditioned (used), Year of construction: 2010, Motoman welding cell consisting of: 2x Motoman HP20 year of construction 2010 2x SKS LSQ5 Welding-kit 1x Motoman positioner WG1000 2x torch cleaning stations 2x DX100 Controller Master/Slave Tested and refurbished with 6 month of warranty. Motoman HP20 The HP20 robot is characterized by its versatility and high precision. Path accuracy can be 0.1 mm, depending on the application. It has an anti-collision system for controlling multiple robots, maximizing production. Due to its thin structure, it is suitable for working in small spaces and can be mounted on the floor, wall or ceiling. Equipped with the DX100 controller. Features of the DX100 controller Yaskawa's compact DX100 controller with advanced structure and process control also offers users greater freedom in the concept of an automated cell: - Multirobot control system with up to 8 robots / 72 coordinated axes of motion. - Robust PC architecture that enables system-level control of robotic work cells. - Connections at the rear of the control cabinet to optimize the internal space. - Built-in ladder logic processing; 4,096 I/O addresses - Various fieldbus network connections - High speed server connection - I / F panels (10) show HMI on the trailer - Advanced Robot Motion Control (ARM) for higher productivity and minimal learning time - Energy savings up to 25% - Repair time (MTTR) Lasdpfoki Tq Sox Ab Ush - Easy maintenance with reducer status check function, hardware diagnostic function, improved problem resolution and alarm recovery - Compact Flash slot and USB port facilitate memory backup - Small and lightweight Windows® CE programmer features a color touch screen with multi-window display.

Condition: refurbished (used), Year of construction: 2007, Kuka tested / overhauled KRC2 ED05 KR240-2 2000 ca 6500h of work! working space: 55,0 m3 maximum reach 2.700 mm 2.900 mm 3.100 mm Nominal payload 240 kg Additional load arm/swing arm/carousel 50/100/300 kg Additional load arm + swingarm, max. 100 kg Maximum total load 640 kg Number of axles 6 Floor mounting position Position repeatability* ±0.06 mm Control KR C2 edition2005 Weight (without control), approx. 1,267 kg 1,277 kg 1,285 kg Temperature during operation +10 °C to +55 °C Protection class IP 65 Footprint of robot 1,006 mm x 1,006 mm Connection 7.3 kVA Noise level < 75 dB Axis data range (software) Speed at nominal payload 240 kg Axis 1 (A1) ±185° 86°/s Ledopa Nxwepfx Ab Ujah Axis 2 (A2) 0°/-146° 80°/s Axis 3 (A3) +155°/-119° 79°/s Axis 4 (A4) ±350° 100°/s Axis 5 (A5) ±125° 110°/s Axis 6 (A6) ±350° 184°/s

Condition: ready for operation (used), Year of construction: 2013, operating hours: 18,698 h, machine/vehicle number: 6620-100358, ABB Laedpfx Abjq Dlhgs Uoh used / tested IRB6620-150/2.2 880Kg with IRC5 M2004 control 150Kg Load capacity: 150Kg Reach: 2200mm Connection cable: 3HAC041639-001 ; 3HAC2493-1 Year of construction: 2013-12-20 Operating hours: 18698 RobotWare-Version: RW5.15_02.00.2005. Options: -644-2 German -748-1 Devicenet Lean -840-3 Profinet Fieldbus Adapter -608-1 World Zones -611-1 Path Recovery

Condition: used, functionality: fully functional, used / tested Dry screw vacuum pumps Nominal suction capacity 350 / 420 m³/h (50 / 60 Hz) Ultimate pressure = 0.05 / = 0.01 hPa (mbar) (50 / 60 Hz) Nominal motor power 7.5 / 9.5 kW (50 / 60 Hz) Nominal motor speed 3000 / 3600 min?¹ (50 / 60 Hz) Lodpsu Urq Tjfx Ab Uoah Sound pressure level (ISO 2151) 66 / 69 dB(A) (50 / 60 Hz) Dimensions (L × W × H) 1367 x 480 x 700 mm Gas inlet / outlet DN 80 PN 6 / DN 63 ISO-K Areas of application This information will be added soon Scope of delivery This information will be added soon