Used Test Tool for sale (46,938)

Condition: like new (used), TOOL FOR ROAD BARRIERS LENGHT 6000mm Fgodpfshylzrex Albsg

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT138 B/BP, used machine Manufacturer: Tool-Temp Type: TT 138 B/BP Overall dimensions: 1240 × 480 × 1400 mm (incl. castors) Weight: Approx. 180 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) with digital display (set and actual temperature) Automatic temperature monitoring Electronic flow control with digital display and automatic minimum-flow control Pressure-increasing pump Temperature measurement at the mould Pressure relief system Leak stopper and mould drainage using compressed air Automatic filling (automatic medium fill) Max. temperature range: Water: up to 160 °C Heating capacity: 24 kW — switchable in stages (6/18), automatic switching of required heating power Cooling capacity: Indirect: approx. 85 kW at 160 °C Direct: approx. 60 kW at 60 °C Pump capacity: Motor: 1.8 kW Pressure mode: max. 6.5 bar | max. 75 l/min Fgedpfx Ajzqbmdslbsg Vacuum mode: max. 8 m H₂O Seal-less magnetic coupling drive (no mechanical seal) Connections: Medium (water): ¾" BSP female thread Cooling water inlet: 1" BSP female thread (with water filter) Cooling water outlet: 1" BSP male thread Compressed air (for mould drainage/venting): ¼" BSP female thread

Year of construction: 2018, condition: excellent (used), Weiss Technik SaltEvent SC/UKWT 1000 Salt Spray Testing Chamber Manufacturer: Weiss Umwelttechnik GmbH Fgjdpozzli Rsfx Albjg Type: SaltEvent SC/UKWT 1000, with annular spray air Machine Type: Salt Spray Testing Chamber / Climate Change Testing System Test Chamber Volume: 1,028 liters For sale is a used Weiss Technik SaltEvent SC/UKWT 1000 salt spray testing chamber with integrated climate change technology, touchscreen control, and annular spray air system. The system was developed for professional corrosion, salt spray, condensation water, temperature, and climate change testing. It is ideal for testing laboratories, the automotive industry, materials testing, research, and quality assurance. Technical Data: Manufacturer: Weiss Umwelttechnik GmbH Type: SaltEvent SC/UKWT 1000 Year of Manufacture: 2018 Test Chamber Volume: 1,028 liters Internal Dimensions (W × D × H): 1,560 × 645 × 720 mm External Dimensions (W × D × H): 2,925 × 980 × 1,370 mm Transport Dimensions (W × D × H): 2,925 × 1,880 × 1,370 mm Weight: 650 kg Mains Connection: 3/N/PE AC 400 V (-10 % / +10 %) 50 Hz Electrical Connection: 3P+N+PE 400 Vac 32 A Rated Power: 9.4 kW Rated Current: 19 A Refrigerant: R134a Refrigerant Quantity: 1.30 kg GWP: 1,430 CO₂ Equivalent: 1.86 t Max. Low Pressure: 17 bar(g) Max. High Pressure: 25 bar(g) Air-cooled version Ethernet interface Testing Ranges: Salt Spray Testing: Ambient temperature +5 °C to +50 °C Condensation Water Testing: Ambient temperature +5 °C to +42 °C Climate Testing: +23 °C to +70 °C Drying / Ventilation: Ambient temperature +5 °C to +70 °C Humidity Range Climate Testing: 20 to 98 % RH Humidity Range Drying / Ventilation: < 30 % RH Dew Point Range: +12 °C to +69 °C Consumption Data: Water Consumption Salt Spray Testing: approx. 0.4 l/h Water Consumption Condensation Water Testing: approx. 34 l Consumption of Spray Solution: approx. 0.9 l/h Compressed Air Consumption Salt Spray Testing: approx. 1.4 m³/h Compressed Air Consumption Ventilation: approx. 7.0 m³/h Temperature Stability: ±1.0 K Equipment: Touchscreen Control Annular Spray Air System Climate Change Testing Function according to VDA 621-415 Salt Spray Testing Condensation Water Testing Temperature Testing Climate Testing Drying and Ventilation Function Air-cooled Cooling System Ethernet Interface Automatic Testing Programs Transport Data: Dimensions (W × D × H): approx. 2,925 × 980 × 1,370 mm Transport Dimensions (W × D × H): approx. 2,925 × 1,880 × 1,370 mm Weight: approx. 650 kg Condition: Used Optical condition according to pictures. Scope of Delivery: Weiss Technik SaltEvent SC/UKWT 1000 Integrated Touchscreen Control Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as pictured. Subject to changes, errors and prior sale.

Condition: new, Professional test cover (prufhaube) from the renowned German manufacturer SCHLEICH – model 13-R2. The device is designed for laboratory and industrial use, ensuring maximum safety during high-voltage electrical testing. The unit is in factory-new, warehouse condition – it has never been used. ⚙️ Technical specifications: manufacturer: SCHLEICH (Germany) model: 13-R2 type: test cover / prufhaube year of production: 04.2023 serial number: 21942 country of origin: Germany ✅ Key features: professional test zone (“forbidden zone”) Fedsy Aggcepfx Albegg transparent cover – full process control safety system (locks / sensors) robust industrial construction high manufacturing quality – made in Germany ideal for HV/electronics/production testing 📦 Condition: New – warehouse stock, unused. May have minimal storage marks. 📸 Included: device as shown in the pictures

Condition: good (used), Deckel FP1 milling machine with 3-axis Heidenhain digital display, fixed angular table, and SK 40 spindle mount. Accessories: counter supports, various collets. In good, operational condition. Can be demonstrated under power by arrangement. Fsdpjzy Hnlefx Albjgg

Year of construction: 2023, condition: used, 5-drawer chest with Bystronic press brake blades See photos for details Online auction of modern and very well maintained metalworking machines (e.g. 2023 BYSTRONIC BYSMART FIBER 3015 10kW laser incl. tower- and sheet storage modules complete, 2x 2023 BYSTRONIC XPERT PRO press brakes, 3x 2023 VALK WELDING incl. PANASONIC welding robots, Q-FIN deburring and finishing, KASTO automatic saws, SIEGMUND welding clamping tables, HAAS machine tools etc.), previously in use at Lemken, the well-known manufacturer of agricultural equipment - including plows and seeders - in Dinteloord, The Netherlands, due to the relocation of the manufacturing. The online auction opens Thursday 3 September and closes Thursday 8 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Fgedpfx Alozyq Ipjbog Viewing day is on: - Tuesday 6 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: good (used), Year of construction: 2020, Various tools and tool holders. Many Wohlhaupter and other brands. Fedozycr Hspfx Albjgg Many of these have never been used. See pictures. For sale as a package only.

Condition: used, overall weight: 700 kg, Jagura 04SP tool grinding machine on a stand, with control panel (emergency stop and keypad), digital readout DRO-201, and cooling system. Technical specifications: - Digital readout: DRO-201 - Control panel with emergency stop and keypad - Design: stand-alone machine on a stand - Cooling system included - Weight: approx. 700 kg The machine is sold in its current condition (used, from bankruptcy, Apeldoorn, Netherlands). Dismantling, loading, and transport are the responsibility of the buyer; the buyer is responsible for providing tools, lifting/loading equipment, and packaging. Inspection is possible by appointment. Fjdezzndqspfx Albogg

Condition: good (used), Universal tool grinding machine Stock number: 3136 Manufacturer: WMW (Gotha) Year of manufacture: 1976 Type: SWU 250-I Machine number: 201/76 Fsdpszx D U Tofx Albsgg Working area Maximum workpiece length: 600 mm Maximum workpiece diameter: 250 mm Maximum disc cutter diameter: 360 mm Maximum grinding length: 450 mm Table Table travel, longitudinal, manual: 500 mm Table travel, longitudinal, automatic: - Table swivel: 0-90° Working surface: 120 x 950 mm Taper in the universal chuck: MK 5 Taper in the tailstock: MK 2 Grinding spindle Grinding spindle head height adjustment: 250 mm Cross travel: 230 mm Rotatable: 350° Tiltable: 15° Maximum disc diameter: 160 mm Grinding spindle speeds: 2200/3500/5200 rpm Power consumption: 1.8 kW Condition: good Accessories/Equipment: extensive accessories – see pictures Dimensions and weights Space requirement: 1,300 x 2,000 mm Machine weight: 0.9 t

Year of construction: 2018, condition: excellent (used), DYCOMETAL CRT2VT-180 Ice Water Immersion Chamber / Thermal Shock Test Chamber Manufacturer: DYCOMETAL Equipos Control Calidad, S.L. Type: CRT2VT-180 Year of manufacture: 2018 Machine type: Thermal shock test chamber / Ice water immersion chamber Test volume / model class: approx. 180 liters For sale is a used DYCOMETAL CRT2VT-180 thermal shock test chamber with a combined hot air / water bath testing system. The system is used to perform rapid thermal shock tests. The test specimen is placed on a pneumatically movable test specimen carrier (cradle), heated in the upper hot air zone, and then immersed in the lower, temperature-controlled water bath. The rapid change between the hot air zone and the water bath subjects components, assemblies, and materials to significant thermal stress. The change can be carried out manually or via a programmed sequence; the immersion depth is adjustable. Technical data: Model: CRT2VT-180 Year of manufacture: 2018 Protection class: IP22 Temperature range: 0 °C to +200 °C Testing system: Hot air / water bath system Upper zone: Hot air testing area Lower zone: Temperature-controlled water / immersion bath Test specimen carrier: Pneumatic cradle Max. controlled travel: approx. 500 mm Operating modes: Manual / Automatic Water bath / cooling system: Temperature-controlled immersion bath Automatic water level monitoring Water inlet / water outlet Integrated water circuit with circulation pump Refrigerant: R134a / 3.4 kg GWP: 1,430 CO₂ equivalent: 4.86 t Electrical data: Mains connection: 400 V / 3N~PE / 50 Hz Connected load: 5.32 kW Current consumption: 11.51 A Control / equipment: EUROTHERM 2604 program controller Manual / automatic test operation PLC control Ethernet communication Anybus Modbus gateway Eaton easy controller EUROTHERM iTools software Pneumatic test specimen carrier / cradle Adjustable immersion depth Fedpfx Aljzzbwwsbogg Stainless steel interior Circulation fans Observation window / test chamber lighting Emergency stop / alarm and safety system Documentation and software as shown in the pictures Application areas: Thermal shock and ice water immersion testing Thermal cyclic stress Electronics and automotive components Sensors and control units Material and component testing Quality assurance / research and development Reliability testing Dimensions / transport data: Internal dimensions (L × W × H): approx. 650 × 650 × 450 mm External dimensions (L × W × H): approx. 1,800 × 1,250 × 2,320 mm Additional height of pneumatic lifting cylinder: approx. 1,500 mm Total height including lifting cylinder: approx. 3,820 mm Weight: approx. 810 kg Transport by freight forwarder Condition / scope of delivery: Used – Year of manufacture 2018 Optical condition as shown in the pictures. DYCOMETAL CRT2VT-180 EUROTHERM 2604 controller Software and documentation as shown in the pictures Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Condition: excellent (used), Year of construction: 2007, Tool Tempo Type : TT 280 BJ CA 2007 Fjdpomxkm Aofx Albogg

Year of construction: 2018, condition: excellent (used), Vötsch VT³ 7012 S2 Temperature Shock Test Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VT³ 7012 S2 Year of Construction: 2018 Machine Type: Temperature Shock Test Chamber / 2-Chamber Shock Test System Test Chamber Volume: 125 liters For sale is a used Vötsch VT³ 7012 S2 temperature shock test chamber with a 2-chamber system and programmable touch panel control. The system was developed for rapid and abrupt temperature changes and is particularly suitable for Environmental Stress Screening (ESS), environmental simulation, electronics and component testing, research and development, as well as quality assurance. The test specimen is transported between the hot and cold chambers via a vertically moving transport carriage. Technical Data: Temperature Range, Hot Chamber: +50 °C to +220 °C Fedpfx Aljzzazusbsgg Temperature Range, Cold Chamber: -80 °C to +70 °C Test Chamber Volume: 125 liters Number of Chambers: 2 Max. Test Weight / Carriage Load: 50 kg Refrigeration Unit: water-cooled Mains Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 10 kW Rated Current: 25 A Refrigerant: Refrigerant 1: R449A Refrigerant Quantity: 1.70 kg GWP: 1,397 CO₂ Equivalent: 2.37 t Max. Low Pressure: 22.5 bar g Max. High Pressure: 25 bar g Refrigerant 2: R23 Refrigerant Quantity: 1.27 kg GWP: 14,800 CO₂ Equivalent: 18.80 t Max. Low Pressure: 22.5 bar g Max. High Pressure: 25 bar g Standby Pressure: 14 bar g Dimensions: Test Chamber (W × D × H): 470 × 650 × 410 mm External Dimensions (W × D × H): 970 × 2,350 × 1,985 mm Required Room Height for Operation: approx. 2,450 mm Equipment: 2-chamber temperature shock system Vertically moving transport carriage Programmable touch panel control CONTROLPAD for status display Observation window Test chamber lighting Cable gland Water-cooled refrigeration unit Automated and programmable defrost cycles Operating hour counter Cycle counter / Remaining time display USB and Ethernet interfaces Application Areas: Temperature shock testing Environmental Stress Screening (ESS) Environmental simulation Electronics and component testing Assembly testing Material testing Quality assurance Research and development Reliability testing Life and stress tests Transport Data: Dimensions (L × W × H): approx. 2,350 × 970 × 1,985 mm Weight: to be determined Transport by freight forwarder Condition: Used Optical condition as shown in the pictures. Scope of Supply: Vötsch VT³ 7012 S2 temperature shock test chamber Touch panel control Equipment and accessories as shown in the pictures Availability: by arrangement. Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Condition: ready for operation (used), Year of construction: 1991, functionality: limited functionality, machine/vehicle number: 9731, feed length X-axis: 5,000 mm, feed length Y-axis: 5,000 mm, feed length Z-axis: 5,000 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 420 mm, feed rate X-axis: 7 m/min, feed rate Y-axis: 7 m/min, feed rate Z-axis: 6 m/min, quill stroke: 75 mm, quill travel distance: 75 mm, quill diameter: 55 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 20 rpm, rapid traverse X-axis: 7 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 7 m/min, table length: 900 mm, table width: 458 mm, table height: 900 mm, type of input current: three-phase, total height: 1,890 mm, total length: 3,970 mm, total width: 3,740 mm, overall weight: 2,300 kg, input voltage: 380 V, space requirement width: 3,740 mm, space requirement length: 3,970 mm, space requirement height: 1,890 mm, milling spindle length: 75 mm, year of last overhaul: 2015, grinding spindle motor power: 59 W, Equipment: documentation/manual, rotational speed infinitely variable, Control system: HEIDENHAIN TNC 407 Travel range: X = 600, Y = 400, Z = 420 mm Spindle speed range: 20 – 4000 rpm Gear stages: 3 Tool holder: SK 40 Arbor stroke: 75 mm Spindle motor: 5.9 kW Feed rate range: 1 – 5000/6000 mm/min (manual/program) Rapid traverse rate x, y: 7 m/min Rapid traverse rate z: 6 m/min Clamping area: 900 x 458 mm Weight: approx. 2300 kg Fedezyp Twspfx Albogg With coolant system, electric handwheel, various tools (without cabinet).

Condition: excellent (used), Year of construction: 2014, operating hours: 3,000 h, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Z-axis: 500 mm, Lightly used preset device. The offer also includes the under-table unit and the label printer. Fgedezni Rropfx Albeg The device is in very good condition, see pictures. The item can be inspected while powered on. Delivery is possible for an additional charge.

Condition: like new (used), Year of construction: 2013, Machine has been equipped with a new PCD software. Fsdpfx Ajx Tpibelbogg

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 2081-9007, total height: 2,200 mm, total length: 1,462 mm, total width: 1,750 mm, workpiece weight (max.): 20 kg, type of input current: DC, overall weight: 3,300 kg, travel distance X-axis: 250 mm, travel distance Y-axis: 795 mm, travel distance Z-axis: 250 mm, input frequency: 50 Hz, input voltage: 230 V, workpiece length (max.): 700 mm, workpiece width (max.): 200 mm, workpiece height (max.): 700 mm, protection type (IP code): IP54, Equipment: documentation/manual, type plate available, Measuring machine with 4 NC-controlled axes, featuring non-contact measurement technology and an additional measuring probe for the automated measurement of micro-precision tools such as milling cutters, drills, step and profile tools. Extended measuring range, specifically for long tools up to 700 mm in length. Due to an additional backlight camera with 400x magnification, even the smallest tools, i.e., microwork tools, can be measured in terms of contour or profile. Thanks to the 400x magnification in both backlight and front light, microwork tools can also be measured using the backlight method. Backlight CCD matrix camera 1, magnification = 50x, diameter (up to 150 mm) and length measurements (up to 700 mm), angle measurements, and radii of the outer contour can be measured. Backlight CCD matrix camera 2, magnification = 400x, observation at the tool circumference, diameter, length, angle measurements, and radii of the outer contour of mini or microwork tools can be measured. Front light CCD matrix camera 3, magnification = 400x, observation of the side view, e.g., helix angle, chamfer width, chip space depth, chip, spiral, and relief angles. Front light CCD matrix camera 4, magnification = 400x, observation of the end face, axial, relief, and radial angles, chamfer widths, center distances. Tool holder SK 50. Fsdpfxszvdxaj Albjgg Software features, see PDF Software License. The machine is sold as a complete workstation with all existing accessories. Also available with a second

Condition: good (used), Year of construction: 2018, Machine is in good working condition. Fgedpezyqh Nsfx Albsg

Condition: ready for operation (used), Year of construction: 1984, Immediately available from training center: MAHO Tool Milling Machine Model MH 600 Year of manufacture: 1984 Table: 700 x 400 mm Travel X/Y/Z: 500/400/400 mm Speeds: 40 – 2500 rpm SK 40 Fjdezwud Aspfx Albsgg Spindle stroke: 80 mm Coolant system Drive: 4 kW Feeds: 8 – 400 mm/rev Head swivels 90/90 degrees Weight: 1900 kg Price: EUR 2,250.-- plus VAT, ex location.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, For sale: 4 x Tacchella PROFLEX C3 / PROFLEX 3 C1 LR/R-B CNC external/internal cylindrical grinding machines. All four machines are from the year 2023 and are equipped with Siemens SINUMERIK ONE CNC controls. They feature hydrostatic guides, a CNC B-axis, an LR/R-B grinding head configuration, Marposs measuring/process monitoring, AE gap crash monitoring, grinding wheel balancing system, workpiece spindle, tailstock, external and internal cylindrical grinding capabilities, and automatic workpiece handling. Fjdpfx Alozdv S Iebsgg The machines are designed for medium to large-sized workpieces. According to the PROFLEX C3 parameters, the maximum grinding diameter is up to 600 mm, the maximum workpiece weight between centers is up to 400 kg, the distance between centers is 800 – 2,100 mm, and the maximum grinding length is 400 – 1,600 mm. Clean note in the offer:

Condition: used, Year of construction: 1981, x-travel 700 mm y-travel 400 mm z-travel 350 mm table-size 920 x 300 mm control konventionell tool adaptor SK40 Fgjdpfx Alezyva Dsbeg turning speed range 40 - 2000 U/min quill stroke 50 mm total power requirement 2,4 kW weight of the machine ca. 1,1 t dimensions 1,4 x 1,6 x 2,1 m Equipment: - Heidenhain digital readout - Coolant system

Condition: like new (used), functionality: fully functional, mount diameter: 45 mm, Selling approximately 60 various used, some new, and original-packaged tool holders, suitable for a Spinner TTS machine with a BMT45 tool interface, for example. All tool holders are from the brand HEIMATEC. 8 209 02 003 1x New, in original packaging 8 240 08 021 1x New, in original packaging 8 240 08 057 2x New, in original packaging 8 010 45 126 6x 4 x new, with packaging / 2 x new, without packaging 8 039 45 090 4x 2 x new, with packaging / 2 x new, without packaging 8 030 45 262 2x New, without packaging 8 010 45 127 5x New, in original packaging The list only shows the new tool holders. There are also approximately 40 used tool holders of various designs, but all with a BMT 45 interface. Fgjdpjzv Rdpsfx Albjg Please take a look at the pictures.

Condition: used, machine/vehicle number: MT 1605, Clarkson Mark II tool and cutter grinder (Clarkson International Tools Ltd, Nuneaton, England). Stand-alone universal tool grinding machine with worktable, dust extraction hose, and machine lighting. Technical specifications: - Capacity: 12" x 6" (305 x 150 mm) Fgjdpszzmtwjfx Albog - Serial number: MT 1605 - Design: stand-alone machine with worktable - Equipped with dust extraction hose and machine lighting - Connection: 400 V The machine is sold in its current condition (used, from a bankruptcy sale, Apeldoorn, Netherlands). Dismantling, loading, and transport are the responsibility of the buyer; the buyer is responsible for providing tools, lifting/loading equipment, and packaging. Inspection is possible by appointment.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Manufacturer KELCH GmbH, Weinstadt, Germany Type / Model KENOVA set line V646M Fedpfjzw Ef Rsx Albegg Year of manufacture 2017 Design Vertical tool pre-setting and measuring device Measuring range Diameter X up to approx. Ø 430 mm (V6 series) Extended X range up to approx. -100 mm (V6 series) Measuring length Z, depending on V6 version, approx. 800 mm Repeatability of camera approx. ± 2 μm (series specification) Measuring system Optical camera system / CCD camera Optics Telecentric lens; features depend on version Tool holder Modular precision spindle; adapter depends on features Possible holders e.g. SK, HSK, PSC, VDI with matching inserts Positioning Coarse and fine positioning in X/Z, depending on features Operation A KELCH pico control terminal can be seen in the photo Mains voltage 90-260 V Mains frequency 50-60 Hz Maximum power consumption 1000 VA Marking CE / Made in Germany

Year of construction: 2025, condition: new, functionality: fully functional, Type: TT-108’000 Year: 2025 Operating hours: 0 h (Machine is brand new) For sale due to an incorrect purchase. Fgsdszhpdlspfx Albeg Ready for immediate delivery.

Condition: used, Year of construction: 1998, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 430 mm, total height: 2,150 mm, total length: 1,900 mm, total width: 1,400 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, type of input current: three-phase, table length: 400 mm, table width: 800 mm, MEXPOL D40A1 Universal Tool Milling Machine with HEIDENHAIN Digital Readout and Counter Support For sale is a robust MEXPOL D40A1 universal tool milling machine, manufactured in 1998. This machine is ideally suited for toolmaking, general mechanical engineering, single-part and small-series production, as well as repair and training workshops. The milling machine is equipped with a HEIDENHAIN ND 780 digital readout, which enables precise and convenient operation. The sturdy cross table with T-slots offers versatile clamping options. In addition, the machine features a coolant system and a counter support for supporting milling arbors during horizontal milling operations. The swiveling milling head expands the range of applications and enables flexible machining of various workpieces. The machine is in a well-maintained, used condition and was in operation until recently. Technical data: Manufacturer: MEXPOL Type: D40A1 Fgedpfx Aezfxubslbjg Year of manufacture: 1998 Factory number: 50443 Machine type: Universal/Tool Milling Machine Spindle mount: SK 40 Speed range: 50 - 315 + 400 - 2500 rpm (9 steps) Feed rate range: 10 - 63 + 80 - 500 mm/min (9 steps) Travel (X / Y / Z): 600 × 400 × 430 mm Table dimensions: 800 x 400 mm T-slots: 7 pcs, 14 mm wide 3-axis digital readout: HEIDENHAIN ND 780 Coolant system Counter support Swiveling milling head Equipment: HEIDENHAIN ND 780 3-axis digital readout, swiveling Swiveling control panel Coolant system Hydraulic tool clamping Drilling quill Counter support for milling arbor operation Work light Handwheels for all axes Fold-up, all-around chip guard with gas springs Total weight: approx. 1,500 kg Machine dimensions: approx. 1900 × 1400 × 2150 mm (L x W x H) Subject to prior sale and errors.