TT 280

TOOL TEMPO

Condition: used, Year of construction: 1996, grinding length 600 mm Fpsdjt Tqrnspfx Afnsb grinding width 250 mm workpiece height ca. 385 mm table surface area 600 x 200 mm table speed -stepless- 2 - 35 m/min table load capacity max. 250 kg grinding wheel size ø 225 x 25 mm grinding wheel hole diameter 50,8 mm vertical feed autom. 0,001 - 0,099 mm rapid traverse vertical 600 mm/min cross feed of table continual 10 - 1000 mm/min rapid traverse cross 1000 mm/min total power requirement 6 kVA dimensions of machine L x W x H 2,65 x 1,70 x 2,28 m Accessories: DRO on Y-and Z-axis, magnetic plate 600 x 200 mm, grinding wheel with flange, wheel trueing attachment, wet grinding attachment with paper band filter

Condition: good (used), Year of construction: 1990, 4-shaft shredder from the well-known manufacturer Untha, type RS 30. 2 x 7.5 kW. The gearbox was overhauled and new cutter discs were installed on the shredder 3 years ago. Since then, it has hardly been used. Repair costs amounted to €5,300. Fjdpfexpn Hnex Afnjpb

Condition: good (used), Year of construction: 1988, voltage 380 V connected load 7,5 kVA dimensions 2725 x 1930 x 1773 mm weight of the machine ca. 2500 kg --> Technical data Main data: --> Table surface: 605 x 300 mm --> Table longitudinal movement max. (manual): 750 mm --> Table transverse movement: 340 mm --> Grinding height between table/new grinding wheel min/max: 22.5 / 322.5 mm --> Standard size of magnetic clamping plate: 600 x 300 mm --> Workpiece weight incl. magnet: 420 kg --> X-axis / longitudinal movement: --> T-slots (number x width): 3 x 17 mm --> Table feed, hydraulic: 0.3 - 25 m/min --> Travel per handwheel revolution: 47 mm --> Y-axis / height movement: --> Automatic vertical feed - coarse in 12 steps: 0.001 - 0.03 mm --> Automatic vertical feed - fine in 8 steps: 0.001 - 0.01 mm --> Distance per handwheel revolution (x1/x10): 0.1 / 1.0 mm --> Graduation on handwheel (x1/x10): 0.001 / 0.1 mm --> Trigger strokes: 0 - 5 --> Rapid traverse: 400 mm/min --> Z-axis / transverse movement: --> Automatic transverse feed intermittent: 0.5 - 20 mm --> Automatic transverse feed / rapid traverse continuous: 0.1 - 1.0 m/min --> Distance per handwheel revolution: 5.0 mm --> Scale mark on handwheel: 0.02 mm --> Standard grinding wheel: --> Ø x width: Ø 355x38 (50) mm Fjdjw Dvkajpfx Afnepb --> Bore: Ø 127 mm --> Speed: 1500 rpm --> Accessories Various grinding wheels --> Documentation

Condition: good (used), Year of construction: 1998, Battenfeld 600/200 CDC Fpjdpfx Aeg Emvhefnsb Unllog 4000 Closing 60 TO Year 1997 Scrow 30 mm Injection weight approx. 90 g

Condition: excellent (used), Year of construction: 2005, Arburg 370S-800-150 Fodpfx Ajidmc Iofnepb Closing 80 TO Scrow 30 mm Bar spacing 37x37 Control S Year 2005 Operating hours 46201 ST Plus sprue picker

Condition: new, table length 1300 mm table width 800 mm stroke height 1010 mm weight max. in kg 1000 kg 190 mm connected load frequency 380 V Fpedpfxjfrztxo Afnsb total power requirement 0,75 kW weight of the machine ca. 0,22 t dimensions of the machine ca. 1,3 x 0,8 x 0,2 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc.

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 3806, grinding length: 600 mm, grinding width: 250 mm, grinding wheel diameter: 250 mm, grinding spindle speed: 3,000 rpm, power: 3.5 kW (4.76 HP), Equipment: rotational speed infinitely variable, JUNG JF520 - workshop overhauled Mechanically and electrically inspected and function tested by our JUNG specialists Wear parts replaced Geometry overhauled according to the JUNG new machine protocol Fedpswz Hf Nsfx Afnopb - Grinding area: 600 x 250 mm - Stepper motor feed - 3-axis HEIDENHAIN digital readout - Dressing compensation - Magnetic force control - Automatic central lubrication - Used magnetic chuck - Used paper band filter 6 weeks parts warranty Delivery time: short notice We are happy to accept your used JUNG grinding machine in part exchange.

Condition: defective spare-parts repository (used), Year of construction: 2007, functionality: not functional, For sale is an injection molding machine of the brand Netstal and the type Synergy 1000-230 After a transportation accident, the control cabinet is completely defective. For this reason, the machine is offered as a spare parts carrier or for repair. Machine would be fully operational and in good condition Technical data: Operating pressure: 210bar, Injection force: 182kN, clamping force: 1000kN, Opening stroke: 0-400mm, Foderfbnmspfx Afnopb mold installation height: 450-750mm Total weight: 7200 kg Operating hours: approx. 53,000 Available from March 2024 First fillings with hydraulic oil can be ordered from us On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: ready for operation (used), Used machine Injection molding machine Manufacturer Krauss Maffei KM 80 C1 Year of manufacture: 2000 Only 1 machine left in stock No delivery time, available immediately Viewing possible by appointment The machine is no longer powered / No cooling water connection The machine is stored properly Technical data: Clamping force (kN) 800 kN Clamping plate (mm) 610×610 Bar spacing (mm) Installation height (mm) 250 Plate spacing (mm) 750 Control MC4 Screen text German Injection unit screw diameter (mm) 45 Injection pressure (bar) 1878 Displacement (cm³) 275 Pump drive power (kW) 18.5 Heating power (kW) 13 Oil filling (l) 270 Dimensions (m) 4.3 x 1.4 x 2.1 Total weight 3.2 tons More photos on request. Fpjdpfx Aou Ti Srsfneb

Condition: new, The manufacturer Zambelli Metalltechnik GmbH & Co. KG is discontinuing support for all paternosters and storage lifts as of December 31, 2023. The company will no longer provide support or spare parts in the future. LTG Lagertechnik Gerschütz GmbH will continue to offer spare parts, modernization kits and support for these devices. Please feel free to contact us at any time. Fsdpfx Asiy Dw Hjfnjpb