Used Tempering Furnace for sale (1,206)

Year of construction: 2016, condition: new, heated length: 4000 mm Ksdscdizfjpfx Ah Nedg conveyor belt width: 900 mm temperature: max. 950 ° C

Year of construction: 2016, condition: new, Gas-fired recirculation chamber furnace max. temperature: 300°C external dimensions ( d x w x h): 2500 x 5300 x 8300 mm Kdedscmr D Hspfx Ah Nsg internal dimensions ( d x w x h): 1500 x 3800 x 3000 mm control zones: 2 burners power: 4 x 90 kW fans power: 2 x 4 kW

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods! Kdsdsd I T Exopfx Ah Neg

Condition: excellent (used), Year of construction: 2017, Max. glass size: 3210 x 6000 mm Min. glass size: 200 x 400 mm Kedsik E Srjpfx Ah Njdg Glass thickness: 4 - 19 mm Start-Up: 2018

Condition: good (used), horizontal single-chamber glass tempering system suitable for coatet glass assignable area: max. 2400 x 4200 mm KW: 814,5 Kdodpfx Ajipx Dyeh Njg Dimensions: length = 22 m, width = 7 m

Condition: good (used), Internal dimensions diametre x depth 430 x 630 mm Temperature 800° Kdedpfjw Nnqujx Ah Njg MARCELS MASCHINEN AG

Condition: as good as new (ex-display), Year of construction: 2023, type of input current: AC, El. heated roller sintering furnace, make Riedhammer type: TR 18/4x33/10-E 90 condition: as new length of debinding zone: 6.12 m length of heating/holding zone: 6.12 m length of the cooling zone: 6.12 m total length of oven without conveyors: approx. 18.4 m total length of oven with conveyors: 20.4 m total width of oven: 3.5 m total height of oven: approx. 2.5 m clear oven width: 1,540 mm Ksdpfx Ahjp T Th Ho Njdg usable width: 4x 330 mm usable height from top edge of roll: 100 mm roller spacing: approx. 85 mm roll diameter: approx. 50 mm number of oven conveyor drives (controlled): 3 pieces number of rule groups: 34 connected load of oven: approx. 476 kW maximum temperature on the thermocouple: 900 °C max. temperature: 930°C power type: 400/230V, 50Hz cooling water consumption: approx. 50 m³/h

Year of construction: 2023, condition: new, El. heated two-track plate pusher furnace, make Riedhammer type: TP12,75/2x20/15-E-145 condition: as new total length of oven: 15.5 m furnace width: 3.6 m voltage type: 400/230V, 50 Hz connected load: 17 kVA tolerated voltage fluctuation: 10% tolerated frequency fluctuation: 1% PLC: SIEMENS/Comfort Panel TP1500-15 product structure (L x W x H) including push plate: 200 x 200x 101 mm Tmax debinding zone (4 segments): 650 °C Tmax pressure compensation zone (1 segment): 750 °C Tmax main combustion zone (6 segments): 1450 °C Tmax cooling module 1: 600 °C Tmax cooling module 2: 300 °C min. push time: 8 min max push time: 30 min number of conveyor plates: 266 pieces channel height: 105 mm Kdjdpfx Asp T T Hnoh Neg

Condition: ready for operation (used), A floor chamber furnace of an unknown make is available. Internal volume: approx. 4m³, temperature range: 50°C-400°C, internal dimensions X/Y/Z: approx. 1800mm/1500mm/1800mm, machine dimensions X/Y/Z: approx. 2500mm/2500mm/2500mm. An on-site inspection is possible. Ksdpfoxp Rbhex Ah Nedg

Condition: good (used), Year of construction: 1991, functionality: fully functional, load capacity: 650 kg, EROS SIZE 7 furnace for carburizing, carbonitriding and quenching. Refractory exchanged with Kanhtal resistors. Useful dimensions. 700x450x1150mm Chamber dimensions: 750x560x1540 mm Outer dimensions (layout) 2500x 3715x 4500 mm Furnace heating power: 85 kW Oil heating power : 35KW Kjdpfxou A Tf De Ah Nedg Furnace working temperature : 20-950ºC Cesats dimensions: 700x1150x150 mm (capacity 3 superimposed baskets) Oil tank capacity: 4500 liters Maximum load approx : 600-650 kg Control equipment UDC-5000 (potential carbon control) Carbon sensor rod (with co2 cleaning) Few hours of use

Condition: excellent (used), Mesh belt continuous furnace CIEFFE type: FNC procedure: tempering, carbonitriding, case hardening lenght: appr. 52 m belt (H x w x d): 25 X 930 X 9300 mm production output: 80-1000Kg/ h connected load: 170kW (HTO) + 35kW (wash) + 135kW (tempering) Heating capacity of natural gas: 768kW (annealing furnace) + 643kW (tempering furnace) annealing furnace: Belt speed: 20 -172 mm/min max. temperature: 910°C temperature uniformity: ± 7°C (area 1-3), ± 5°C (area 4-6) washing machine: wide conveyor belt: 1000 mm washing sink: 1800 lt rising tank: 1200 lt quantity per hourly production: 700dm3/h tempering furnace: belt speed: 60 - 234 mm/min max. temperature: 650°C temperature uniformity: ± 5°C (150-600°C) Kdodexpuahjpfx Ah Nog

Year of construction: 2011, condition: excellent (used), Key Choc Chocolate Moulding Tempering Machine Bench Top Machine Model MM15 Kdsdpsnxkc Refx Ah Njg Year 2011 Capacity 15kg In everyday use at present

Condition: used, Warm air oven, circulating air oven, heat chamber, tempering oven Maximum internal temperature: 240°C Internal dimensions (W x D x H): 485 x 485 x 300 mm Power supply: 220 Volt, 50 Hz - Airtight door lock - Connection for overpressure or vacuum with shut-off valve and pressure gauge from -1 bar to +0.6 bar - Inlet or exhaust air valve for the heating chamber - Interior heated up to 240°C, without temperature control. Dimensions (L x W x H): 790 x 670 x 520 mm Kdodpfx Aoxciugsh Nsg Weight: approx. 60 kg Good condition

Condition: excellent (used), max. temperature 1200 Grad size of opening 220 x 120 mm Kedpfxsxcbldj Ah Nedg depth of chamber 400 mm dimensions of the machine ca. 1,4 x 1,2 x 1,6 m

Year of construction: 2016, condition: good (used), Maximum temperature: 650°C Internal dimensions: Width 650 mm Ksdpfoxb A E Asx Ah Njdg Depth 750 mm Height 600 mm Electrical connection: 380 V, 20.7 kW Weight: 390 kg Space requirement: 1600 x 1200 x 1800 mm

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 3945, Retort Type Mesh Belt Furnace Typ: BLH with protective gas atmosphere Kdsdpfow Tcrujx Ah Neg Heat treatment line with protective atmosphere KOHNLE BLH-950-250/50-1800 Year of production: 2003 Serial number 3945 Hardening in a protective atmosphere, cooling in oil, washing and degreasing and tempering It consists of - Vibrator for charging - 300 kg capacity - Magnetic conveyor for filling the furnace - Tempering furnace - max working temperature 950 C 3 temperature control zones strip width 250 mm Capacity 30-50 kg/h Tunnel length 1800 mm Protective atmosphere Propane (possible change of gas for a protective atmosphere) - Oil quench with cooling oil, temperature 70C - Magnetic conveyor for extracting goods - Stand for washing and degreasing - vibrator for charging Annealing furnace - max temperature 500 C Control cabinet SIEMENS ALL ORIGINAL TECHNICAL DOCUMENTATION FROM THE MACHINE Installation dimensions 17 m x 2 m x 2.5 m The furnace can also be modified for nitrocarburizing. Dismantling and loading costs are charged additionally The price of the mentioned line is not fixed for serious enquiries

Year of construction: 2003, condition: good (used), input frequency: 50 Hz, machine/vehicle number: 3680-03, Resistance furnaces, 2 pieces, electric, crucible, heating, metal storage, melting, capacity 300 kg/h. Capacity of one furnace, aluminum alloy, weight 1500 kg, volume of the heating chamber 1.3 cubic meters. Energy consumption in production operations (maintaining molten metal at a temperature of 720 degrees C, open crucible) approx. 20 kW. Energy consumption during production inactivity (maintaining the molten material at a temperature of 720 degrees C, closed crucible) approx. 10 kW. Maximum melting point 900 degrees C, electrical power 70 kW. Voltage 230/400V, 50Hz, lap-automatic PID controller, bath thermocouple and safety controller, PLC control. The weight of one furnace is approx. 2600 kg. Furnace dimensions: length 1850mm, width 1850mm, height 1650mm + cover with installation 300mm. Dimensions of the frame for the stoves: length 3800mm, width 1850mm, height 210mm. Note: We also add an unused reserve crucible. Ksdpfxed Ev Ias Ah Nsdg

Condition: used, Vertical furnace, make Borel Kdjdpfxexltd Rs Ah Njg Possible processes: tempering, nitriding Dimensions: diameter 800 mm height 1.800 mm max. Temperature 600ᵒC Connected load 50 kW Without lid and electrical cabinet.

Condition: ready for operation (used), Electric furnace REAG – 10 kW | 290V | 17.5A I will sell an industrial electric furnace from the renowned Italian company Reag, designed for applications requiring high temperatures, such as heat treatment of metals, firing ceramics, glass processing or laboratory work. Technical data: Kdedpfev Drpyex Ah Nog Power: 10 kW Voltage: 290V Current: 17.5A Connection system: Star (Y) Serial number: 1796 Manufacturer: Reag (Italy) Condition and use: The furnace is in good technical condition, fully functional and ready to work. It was used as intended in industrial conditions.

Year of construction: 2018, condition: new, Double chamber furnace, make VEI-Engineering type: KA_GB 10.14.14/d max. temperature: 550°C fan power: 2 x 4 kW Ksdedyvipepfx Ah Nodg heating: natural gas burners power: 2 x 100 kW useable dimensions per chamber width: 1.000 mm height: 1.400 mm depth: 1.400 mm

Year of construction: 2019, condition: new, useable dimensions (bogie hearth): depth: 4.000 mm width: 3.500 mm height: 1.500 mm max. temperature: 1200 °C working temperature: 980 °C heating power: 810 kW divided between 6 burners à 135 kW drive systems bogie hearth: 2 x 0,75 kW number of control groups: 3 PLC: Siemens S7 Kjdpfx Aed Nf Smjh Nedg Please note that we make the furnaces according to customer requirements (e.g., dimensions, temperature, type of heating).

Year of construction: 2016, condition: new, # suitable for treatment under inert gas # with rapid cooling by fan external dimensions (w x h x d): 1500 x 1600 x 2500 mm useable dimensions (w x h x d): 750 x 600 x 1100 mm Kodpfocdi R Eex Ah Nsdg temperature: 1200°C electrical heated: approx.. 42 kW charge weight: 700 kg

Year of construction: 2021, condition: new, temperature: max. 650°C heating power: 45 kW fan: 3,0 kW Ksdpfxjgyn H Nj Ah Njdg total connected load: approx. 52 kVA internal dimensions (l x w x h): 1.000 x 700 x 700 mm charge weight: max. 1,0 t

Year of construction: 2021, condition: new, Pit furnace, make VEI type: VEI_SCO_EB clear height: 1200mm clear diameter: 1400 mm Ksdog R Snhjpfx Ah Nodg outer diameter: 2200 mm outer height (lidless): 1650mm outer height (with lid): 2600mm electrically heated: 64,5 kW fan: 5,5 kW connection: 400 V, 50 Hz temperature: max. 750°C

Year of construction: 2019, condition: new, Electrically heated continuous furnace, make VEI-Engineering type: DLNTO-EB 830-500 heat treatment: tempering temperature max. 500°C working temperature: 220-450°C clear dimensions (w x h): 800 x 210 mm heated length: 4.950 mm heating power: 2 x 30 kW fans: 2 x 5,5 kW Cooling water for 2 heat exchangers: inlet max. 2 bar Kdjdod Sg Hhspfx Ah Nsg PLC: Siemens S7