Used Tempering Furnace for sale (1,159)

Year of construction: 2005, condition: ready for operation (used), Industrial drying oven / heating oven: Maximum operating temperature: 160°C, power: 20.6kW, double-door model, recirculating air / fresh air system, digital PID temperature controller, digital timer / process control, digital recording device / chart recorder (TE Direct), internal dimensions (W x H x D): approx. 1000mm x 1500mm x 800mm (approx. 1200l volume), external dimensions (W x H x D): approx. 1600mm x 2100mm x 1200mm, total weight: 580kg. Inspection possible by arrangement. Godpfeylzg Iox Ahveip

Year of construction: 2025, condition: new, functionality: fully functional, Equipment: CE marking, Bogie hearth furnace / kiln / oven for heat treatments on steel (normalizing, annealing, tempering, preheating, etc.) made by Pagnotta Termomeccanica srl, Deruta, Italy Model FFEC/TT Giodpfjwd Halox Ahvep Maximum temperature: 800°C Usable load dimensions: 1,300 x 1,000 x 1,300 mm (H) CE certification 12-month warranty New machine, built in Italy The specifications and attached photos are purely indicative. Customized machines are available, specifically for each heat treatment process.

Condition: new, # suitable for treatment under inert gas # with rapid cooling by fan external dimensions (w x h x d): 1500 x 1600 x 2500 mm Gisdpfx Ascdi R Eshvop useable dimensions (w x h x d): 750 x 600 x 1100 mm temperature: 1200°C electrical heated: approx.. 42 kW charge weight: 700 kg

Year of construction: 2010, condition: excellent (used), functionality: fully functional, machine/vehicle number: SN101660321, 12-month warranty, in stock -Electrically resistance-heated tilting crucible furnace system for melting aluminum -Max. furnace temperature: 1200 °C Gijdpfx Ahjylkz Uovsp -Max. melt bath temperature: 1050 °C -Melting capacity: 320 kg Al/h -Controller H 100 (5 programs with 4 steps each) -Includes 2-channel preset timer and 6100A recorder for thermocouple data logging for customer-side connection -No exhaust system required -Integrated safety system: In case of thermocouple failure, the furnace continues operation at reduced power to prevent the melt from solidifying -Temperature limiter for the chamber as overtemperature protection. The limiter disconnects the heating system once the set limit temperature is reached and only reactivates it after the temperature has dropped below the threshold. -Power rating: 140 kW (increased!) -Mains connection: 400V 3/N/PE, 50 Hz -Energy consumption (lid closed/open) approx. 8/17 kW -Weight approx. 3000 kg -External dimensions (L x W x H): approx. 2010 x 2000 x 1460 mm -Documentation, CE declaration Inspection in our warehouse by appointment! Furnace, industrial furnace, melting furnace, tilting crucible furnace, crucible furnace, aluminum melting furnace

Condition: good (used), debinding and sintering chamber furnace, make Nabertherm type: LH 280/13 DBS temp. max.: 1300°C internal dimensions (w x d x h): 750 x 750 x 500 mm external dimensions (w x d x h): 1250 x 1750 x 2100 mm loading weight : max. 150 kg power: 44 kW heating: 5-sides heated Giedpjmfn Rujfx Ahvsp control zones: 1 weight: 700 kg voltage: 400 V 3/N current consumption: 63 A - with an air heater under the furnace, pre-heated air with a temperature of up to 400°C can be flushed into the furnace chamber during the debinding phase. - controllable cooling housing with autom. ball valve - automatic exhaust damper - automatic exhaust flap - monitoring of fresh and exhaust gas volume flow, as well as furnace chamber pressure by differential pressure monitor. -The furnaces themselves, particularly the brickwork, heating elements, and insulation, are in excellent condition with low or no working hours, making them practically like new. -To operate these furnaces, it will be necessary to implement at least one temperature controller per furnace, a PLC, or a similar control system.

Year of construction: 2008, condition: excellent (used), functionality: fully functional, machine/vehicle number: FX036084, Resistance-heated system with a gas-tight furnace retort, used only for testing purposes Application: hardening, nitriding, nitrocarburizing, tempering Gas nitriding of quenched and tempered steels (e.g., 42CrMo4), which are suitable for hardening due to their chemical composition and, in the tempered state, exhibit good toughness at given tensile strength. Intended use includes, for example: crankshafts, steering knuckles, connecting rods, cold-formed pressed parts, etc. Further applications: annealing, hardening, quenching and tempering, and tempering of metallic materials. Fuel gas equipment with flare system, so the furnace can also be used for debinding. - Continuous operation Tmax 800°C - Maximum temperature approx. 900°C (under protective gas) - SE-402 program controller - 3-zone heating - Gassing device: 2 different protective gases as well as fuel gases - Gas circulation - Vacuum unit - Internal retort WxDxH 580x830x1500 mm (special length) - Retort volume approx. 722 liters - Maximum batch weight approx. 1000 kg - Two-stage rapid cooling with frequency converter - Flare device with flame monitoring - Viewing window DN150 Giedpfx Aeylacnohvjp - Max gas operating pressure 7 mbar - Mains voltage 400V, 3 phases, N, PE - Heating capacity 70kVA - Rated current 3x97A - Weight 1900 kg - External furnace WxHxD 1700x1950x2750 mm - Control cabinet WxDxH 510x1360x500 mm - Operating manual, circuit diagrams, CE declaration Inspection by appointment in our warehouse. We are happy to offer assembly and transport services. We supply new and used industrial furnaces.

Condition: excellent (used), Annealing furnace Make Naber Type 41 S 12 kw YEAR OF MANUFACTURE 1972 Dimensions of the annealing chamber : width 350 mm height 220 mm depth 500 mm Gedpfx Ahorwfqnsvjip Transport dimensions : Length 1350 mm Width 850 mm Height 1560 mm with pallet Weight 320 kg

Condition: good (used), Year of construction: 2005, Pusher Furnace System (PUS1), Manufacturer: Ipsen International GmbH, Type: PP-2-65x65x65-18-G, Serial No.: AN 10.1595-01, Year of manufacture: 2005, Fuel: Gas/Natural Gas/Nitrogen/Methanol, 414 kW, 296 kVA comprising: Two-Chamber Pre-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, Washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Preheating Furnace, Type: DL 65x65x65 4-G, Gijdpfxjyabxys Ahvjp 25 A, 9.5 kVA, natural gas heated, 80-100 mbar, 350-500°C Pusher Gas Carburizing Furnace (Double Line), Type: PP-2 65x65x65-18-G, natural gas heated, 86 A, 29.6 kVA, 10 kWh/m³, 80-100 mbar, 860-950°C, 140 pieces per batch, 695 kg/h Oil Quenching Bath (Hardening Oil), Type: QO-65x65x65-E, 161.5 A, 93.1 kVA, electric, air cooling, 6 m³ tank volume, 120°C max., 60-80°C working temperature Two-Chamber Post-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Tempering Furnace, Type: DL-65x65x65-6-E, 126.8 A, 84 kVA, electric, 300°C max. furnace temperature, 150-240°C working temperature Batch Transport System, Measuring, Control, and Switch Cabinet with Conti-Control System, Type: CO/CO2-2 Batch Data: Case hardening for transmission parts 650 mm x 650 mm x 650 mm, max. 280 kg, batch transport height 800/2,200 mm

Year of construction: 2004, condition: good (used), Laservall KUBO100 Tempering Unit (2004) Gsdpfx Ahju Aqr Ijvsip The Laservall KUBO100 is a compact, fiber-delivered pulsed Nd:YAG welding system often utilized for precision laser welding and micro-welding applications. It is frequently featured as part of the Master Kubo Series from Laservall S.P.A. (Italy), designed for high-precision manufacturing, often in industrial settings. 1. System Type: Pulsed Nd:YAG laser welding system (sometimes referred to as a welding microscope or workstation). 2. Applications: Ideal for precision welding, micro-welding, and repairing, often used on mold tools. 3. Key Features: Offers high-precision welding capability, often integrated with a microscope for detailed work. 4. Manufacturer: Laservall (Italy). 5. Model Variants: Units often feature 2004 or 2009 manufacturing dates in second-hand markets. It is important to differentiate the KUBO 100 welding system from similar names, as some listings in industrial marketplaces may confuse it with a "tempering unit" or cooling accessory, but the primary identification is as a specialized welding

Condition: excellent (used), Carbolite CWF 11/5 Chamber Furnace 1100 °C Godpfspygpfjx Ahvjip Max Temp: 1100 °C With exhaust system and table Upward opening door keeps hot surface away from user Soft self-closing door (for 5, 13, 21 & 23 liter models) Standard start delay and process timer function Durable aluminum oxide support plates for the heating elements; sturdy door surround and base plate High quality fiber insulation with low thermal mass Powerful heating elements on both sides provide very good temperature homogeneity Easy access to elements and controls simplify maintenance and servicing Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles new and used - you will find in our store! International shipping costs on request!

Condition: good (used), Glasbeek Finish Gas Chamber Furnace Type 003.05 Glasbeek finish Gas chamber furnace Type 003.05 With loading trolley Maximum temperature 200 ° C Approximate inside dimensions (B1900mm x T2950mm x H1800mm) Financing through our bank is also possible. komplett-konzept.leasingo.de Gisdpfx Ahjd Spx Dsvjp More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 1992, Glasbeek Finish Gas Chamber Furnace Type G.11.01, 250 ° C Glasbeek finish Gas chamber furnace Type G.11.01 Maximum temperature 250 ° C Approximate inside dimensions (B1400mm x D1900mm x H1985mm) 6m³ Bogie dimensions approx. (1000 mm x 1800 mm x H250 mm) Year 1992 3 x 380 volts 41 kW Financing through our bank is also possible. komplett-konzept.leasingo.de Giodjd Srlrjpfx Ahvop More articles - new and used - can be found in our shop! International shipping costs on request!

Year of construction: 2012, condition: used, Technical details: max. temperature: 700° - übliche Temperatur: 400 - 650°C Grad size of opening: B: ca. 2200 x T: ca. 3800 x H: ca.1100 mm program control: Siemens S7/300 IM 151-7 interface: Ethernet container volume: Ofen-Volumen: 9,2 m³ l control voltage: 24 / 230 Volt current type: 1P/PEN; 50 Hz Voltage: 400 V elect. connected power requirement of heater: 3 x 3 x 21 kW = 189 kW flow rate: 3 x ca. 9.000 = 27.000 m³/h weight of the machine ca.: 8,0 t dimensions of the machine approx. HxWxD: ca. 3.9 x 3.8x 4.8 m dimensions electric cabinet: ca. B: 2.400 x T: 400 x H: 2.000 mm transport dimensions LxWxH: ca. 5,2 x 3,6 x 2,9 m Electrically heated circulation oven Electric annealing furnace whose housing is made of profiled sheet steel and lined with lightweight refractory bricks/ firebricks. Application/processes: mainly annealing of low-alloy and high-alloy wood cylinders (e.g. alloyed gray cast iron) Usual operating weight 5000kg max. 8000kg The parts are placed directly crosswise on the bogie hearth/grate in the flow device. (Height above floor approx. 750mm without grate) Heating integrated in oven ceiling Circulation fan (3 compact fans) on oven side wall, 3 x 4.0 kW = 12.0 kW Forced cooling (1 cooling air fan) Program control via 25 programs with 50 program sections per program Oven door/lifting door with SWE gear motor approx. 2.2 kW (frequency-controlled) Bogie hearth drive approx. 3.0 kW SEW geared motor (frequency-controlled) Gedpfsu R Dhxsx Ahvjip incl. center rail (chain drag) used, good condition *

Year of construction: 2018, condition: excellent (used), functionality: fully functional, machine/vehicle number: SN49983, Chamber furnace in very good condition. 12 months warranty. - Max. temperature: 1300 °C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 liters - Separate main switch - 5-sided heating - Fresh air and exhaust air with flaps, electrically operated by Belimo actuators - Inlet fan controlled via frequency inverter and regulator - JUMO control system (language can be switched!) - Additional drag element type S for external data logging - Documentation included Giedpfx Ahox U Ekdevsp - Net weight: 250 kg - Power consumption: 18 kW - Current: 26 Ampere - Connection voltage: 3/N/PE 400 VAC - Connection type: prepared for fixed connection with 32 A plug - Documentation and CE declaration We have several units of this furnace model in stock. Inspection by appointment. Furnace, furnaces, annealing furnace, industrial furnace, chamber furnace, kiln, drying oven, tempering furnace, laboratory furnace, hardening furnace

Condition: excellent (used), Year of construction: 2011, \- temperence 20-90°C \- 180 l/min.; 3,5 bar \- 120kW \- 13,6 kW (12kW ) \- Godpfxequupao Ahvoip weight 120 kg/per piece

Condition: good (used), Year of construction: 2015, Laboratory furnace for bending tests, 120 kW kiln, 900 °C chamber furnace 2 bending chambers Adjustable ceiling height Temperature range: max. approx. 900 °C Auxiliary heating Control cabinet PC, HP, Intel Core 2 Duo Voltage: 400 V Power: 120 kW Gsdoxurpwjpfx Ahveip Year of manufacture: 2015 Pre-chamber Width: 900 mm Height: 300 mm Depth: 580 mm Bending chamber Width: 520 mm Height: 115 mm Depth: 550 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: excellent (used), Sat B2599A Drawer oven 130 °C If very different products or product parts with equally different annealing times are to be treated independently of each other in the smallest possible space, drawer ovens are the smartest ergonomic solution. Oven data Manufacturer: Sat Model: B 2599 A Type: 1000T Type: Drawer oven Outer dimensions of the furnace width with control cabinet: 2500 mm depth: 1700 mm Height: 2250 mm Usable volume in each drawer width: 1200 mm depth: 850 mm Height: 170 mm (measured 178 mm) Maximum working temperature: 130 °C Temperature homogeneity in the usable volume, when stabilized : +/-3°C at 80°C Frame : The basic structure consists of a non-alloyed steel beam structure, on which the external lighting made of non-alloyed steel is painted in RAL 1013 (pearl white). Gisdpfjim Ik Sox Ahvjp The furnace inner casing is made of aluminized steel sheet. Insulation between the two furnace housings (inner/outer housing) is provided by 120 mm rock wool. Floor: Same as the furnace walls, with 120 mm thick thermal insulation. Height (from factory floor to I. drawer): 800 mm +/100 mm adjustable by the furnace feet. Openings: 3 drawers, height 250 mm, for a usable load of 120 mm height. Maintenance doors : 2-leaf maintenance door on the back of the oven. Secured by screws. This door allows complete access to the inside of the furnace. Parts handling: The handling of the parts is ensured by 3 drawers (one above the other). Height between each drawer : 250 mm Usable height per drawer : 170 mm, with almost 10 mm reserve. The drawers are smooth and equipped with a locking piece at the bottom of the drawer to reduce heat loss when opening. Each drawer has a useful load capacity of 120 Kg with load distribution over the entire surface. Load peaks up to 240 Kg can be supported. The drawer seals are made of silicone. The locks of each drawer are ensured by electromagnets and controlled by the Siemens system. Timing of the minimum preheating time with a timer per drawer (located in the electrical cabinet). Timing of the maximum preheating time with one timer per drawer (located in the electrical cabinet). One temperature indicator is provided per drawer. These indicators will be located on the front of the furnace, to the left of the drawers. Financing through our bank is also possible. komplett-konzept.leasingo.de More industrial furnaces in other sizes - new and used - you can find in our store! International shipping costs on request!

Condition: good (used), Kreuter chocolate temperer Gijdsfh Tngjpfx Ahvsp Model: TMK100 Serial: 7906/91 Refurbished by WolfDE in 2013, 100Kg chocolate temperer, adjustable temp controls, agitation with scrape surface, with all manuals, 3Ph

Year of construction: 2008, condition: ready for operation (used), Loading chamber dimensions: 280x580mm, loading height: 700mm, max. load: 300kg, with protective housing and documentation, machine was functional until the end, complete maintenance would have to be carried out on the machine, inspection is possible. Giedpfjqgfbgex Ahvsp

Year of construction: 2010, condition: ready for operation (used), Usable space: 7.7m³, max. temperature: 250°C, heating output: 54kW, volume flow: 15m³/min. Gisdpfxoilhucj Ahvjp

Condition: ready for operation (used), Max. Working temperature: 1120°, heated length: 1000mm, cooling length: 1850mm, channel height: 40mm, conveyor belt width: 110mm, throughput speed: 100-1000mm/min, splitting gas consumption: 1.5-2.5Nm³/h, touch panel: Siemens SIMATIC HMI, length: 5000mm, width: 650mm, height: 1350mm, with integrated ammonia splitter GSP 25 FA, integrated gassing panel, protective gas from ammonia splitter (on-site ammonia supply) + N2 purge gas as required, MSR system with Siemens PLC and touch HMI, atmosphere monitoring, process documentation, on-site inspection is possible. Gjdpsq Ttz Ejfx Ahvoip

Year of construction: 2010, condition: ready for operation (used), Heated surface: 1600x2600/ 2000x2000mm, nominal power: 120kW, length: 2600mm, width: 2300mm, with control cabinet and conveyor. Godpoifpuaofx Ahvsip

Year of construction: 1991, condition: ready for operation (used), Working/ nominal temperature: 800/ 850°C, inner dimensions: 1100x500x260mm, heating output: 120kW, connected load: 1.5kW, with documentation, without accessories or spare parts, an inspection is possible. Gjdpfxspcgzge Ahvsip

Condition: ready for operation (used), A floor chamber furnace of an unknown make is available. Internal volume: approx. 4m³, temperature range: 50°C-400°C, internal dimensions X/Y/Z: approx. 1800mm/1500mm/1800mm, machine dimensions X/Y/Z: approx. 2500mm/2500mm/2500mm. An on-site inspection is possible. Giodoxp Rbhjpfx Ahvep

Year of construction: 1992, condition: ready for operation (used), Gross combustion chamber: 800l, usable combustion chamber: 500l, combustion chamber dimensions X/Y/Z: 820mm/600mm/1015mm, connected load: 100kW, max. operating temperature: 1400°C, machine dimensions X/Y/Z: approx. 1450mm/1150mm/2100mm, weight: approx. 1500kg. Including fresh air blower and control cabinet with controller Jumo Imago 500. On site inspection is possible. Gjdpsyfv N Rsfx Ahvoip