Used Esab Aristo Mig 400 for sale (56)

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Almost new machine. Only 2 spools of welding wire have been used with it in total. It is in perfect condition and has served as a backup unit. Laodpfx Aboyxf R Sozsg

Condition: used, functionality: unexamined, type of input current: three-phase, total height: 3,000 mm, total length: 3,000 mm, input voltage: 380 V, type of cooling: water, welding current at 60% duty cycle: 1,000 A, welding current at 100% duty cycle: 800 A, welding current (min.): 250 A, welding current (max.): 1,250 A, Used ESAB submerged arc welding (SAW) system for sale, manufactured by ESAB AB / ESAB Welding Equipment AB, Sweden. The system is designed for mechanized submerged arc welding (SAW), including tandem welding AC/DC. It is suitable for welding long, straight seams, beams, profiles, sheet metal structures, cylindrical products, vessels, tanks, and heavy welded structures. Manufacturer: ESAB AB / ESAB Welding Equipment AB Ljdpozimbkjfx Abzeag Country: Sweden Process: SAW – Submerged Arc Welding Type: Mechanized welding system / tandem welding system Inscription: UP Tandemschweißen Welding: DC + AC with ESAB power sources Welding head: Available, with flux hopper Work beam / chassis: Long ESAB welding beam / tractor Condition: Dismantled / stored, available for inspection Welding power sources ESAB TAE 800 Parameter Data Model ESAB TAE 800 Range 300 A / 28 V – 800 A / 44 V 100% duty cycle 800 A / 44 V 60% duty cycle 1000 A / 44 V Power supply 400 / 415 / 460 / 500 V, 50 Hz Protection IP23 ESAB LAE 1250 Parameter Data Model ESAB LAE 1250 Type Welding rectifier Range 250 A / 24 V – 1250 A / 44 V 100% duty cycle 1250 A / 44 V Power supply 220 / 380 / 415 / 500 V, 50 Hz Protection IP22 Weight 490 kg Data from the tandem welding plate Mode Current Voltage Direct current / DC 520 – 580 A 28 – 30 V Alternating current / AC 550 – 620 A 34 – 36 V Travel speed: 680 – 800 mm/min. Included components: long ESAB welding beam / chassis; welding head; flux hopper; cables and hoses; control boxes; ESAB TAE 800; ESAB LAE 1250; submerged arc welding equipment. Condition: The system is used and is currently dismantled / stored out of active operation. Visible signs of use, dust, dirt, and storage are present. It is sold in its current condition, with the equipment shown in the pictures. On-site inspection and technical verification by the buyer are recommended before purchase.

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system Laedey Ulzijpfx Abzog -Manufacturer: Esab, PULS MIG/MAG welding machine -Type: AristoMig 500W -Max. welding power: 500 A -Features: Water-cooled -Wire feeder case: 4-roller drive Esab type AristoFeed 48-4 -Quantity: 3x Esab, PULS MIG/MAG welding machine available -Price: per piece -Dimensions: 1200/700/H1730 mm -Weight: 210 kg

Year of construction: 2015, condition: ready for operation (used), A CNC gantry flame cutting machine ESAB is available. Track width: 4000mm, cutting dimensions X/Y: 3000mm/6000mm, track length: 8000mm, track height: 465mm, table height: 700mm, cutting speed: 24m/min, flame cutting table dimensions X/Y: 3100mm/6180mm. Cutting process: Oxyfuel/plasma, Torch: Cooljet-Pro, Plasma source: m3 202 EPP 202 GEN 2, Plasma torch: PT-36. Filter capacity: 9000m³/h, Filter area: 180m², Particle size: 0.1µm. The plasma source cooling system must be repaired. Documentation available. On-site inspection is possible. Lodpfx Ajw Azu Isbzoag

Condition: excellent (used), Year of construction: 1996, ESAB LHF 400 Welding Rectifier / Electrode Welder Infinitely variable welding current range up to 400 A, power 400 A at 35% duty cycle, 315 A at 60% duty cycle, weight 165 kg, ... Lodpsv N Hkcofx Abzjag Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 2007, condition: ready for operation (used), A complete CNC gantry plasma cutting machine ESAB is available. Travel X/Y: 12000mm/4000mm, max. workpiece dimensions X/Y: 12000mm/3000mm, max. material thickness steel: 150mm, total system dimensions X/Y/Z: approx. 15000mm/5200mm/1500mm. System components: Cooling unit Kjellberg KWE 360, gas box Kjellberg PGV 3 and plasma connection Kjellberg PBA-360. The system has fire damage. Documentation available. On-site inspection is possible. Lasdpfx Asv Dkcfobzsg

Condition: used, Year of construction: 2012, operating hours: 2,795 h, functionality: fully functional, machine/vehicle number: 21214714, type of input current: three-phase, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 150 mm, sheet thickness aluminum (max.): 40 mm, input voltage: 230 V, cutting speed: 2,000 mm/min, table height: 700 mm, workpiece weight (max.): 30,000 kg, table length: 12,950 mm, table width: 2,700 mm, input frequency: 50 Hz, Equipment: documentation/manual, We offer this used ESAB COMBIREX DX 3500 gas and plasma cutting machine, manufactured in 2012. Type: COMBIREX DX 3500 Machine No.: 21214714 Year of Manufacture: 2012 Laodpfx Aezc Hn Ejbzsg If you have any questions or require further information, please contact us by email or phone.

Condition: used, TIG and Electric Welding Machine / Inverter ESAB Type LTN 160 TIG Welding Machine for TIG and Electrode Manufacturer No. 405-423-0479 Year of manufacture approx. 2010 TIG Output 160 Amps = 35% duty cycle 110 Amps = 60% duty cycle 80 Amps = 100% duty cycle Electrode Output 140 Amps = 35% duty cycle 110 Amps = 60% duty cycle 80 Amps = 100% duty cycle Power supply 230 Volts, 50 Hz, Schuko plug - Continuous power adjustment - 2-stroke and 4-stroke operation - Stick electrode operation - 12-meter TIG hose package with hand torch - Direct current only (DC) - HF ignition Ljdsv Uragopfx Abzjag - Shielding gas pressure regulator - Mobile trolley with cylinder holder Space requirements L x W x H 800 x 690 x 1120 mm Weight 60 kg Good condition

Condition: ready for operation (used), Year of construction: 2012, total width: 4,650 mm, total height: 1,660 mm, product length (max.): 15,000 mm, table load: 1,000 kg, number of axes: 3, This 3-axis ESAB Combirex DX3500 Oxy was manufactured in 2012. It features a cutting area of 2,700 x 12,950 mm and a maximum material thickness of 125 mm. The machine is equipped with an ESAB Precision Plasma M3 Gen 2 generator and a CNC Vision 51 control system. If you are looking to get high-quality plasma cutting capabilities, consider the ESAB Combirex DX3500 Oxy plasma cutting machine we have for sale. Contact us for further details. • Table size: 2,500 x 13,000 mm • Cutting area: 2,700 x 12,950 mm • Table height: 700 mm • Max material thickness: 125 mm • Plasma generator: ESAB Precision Plasma M3 Gen 2, 360 A • Plasma torch: PT 36 • Gas torch: Cool Jet (1 unit) • Control system: CNC Vision 51 • Power supply: Machine 1 x 230 V 50 Hz; Plasma 3 x 400 V 50 Hz • Operating hours: • Plasma torch: 2,795 h • Gas torch: 1,979 h • Gantry and drive: • High-performance cutting gantry • Linear control, AC motor drives, double-sided rack and pinion • Positioning speed max. 24,000 mm/min • Continuous gantry position monitoring Lajdoyrf Szspfx Abzeg • Plasma and gas cutting: • Plasma gases: Technical air, N₂, O₂, H35 • Max piercing: 40 mm (CS/SS/Al) • Cutting speed (CS): 12 mm – 4,200 mm/min; 25 mm – 2,000 mm/min; 38 mm – 1,000 mm/min • Automatic piercing, capacitive height control • HF start system • Cutting quality: ISO 9013 Class 3 • Protection and environment: • Dust protection: IP54 • Relative humidity: 10–85% (no condensation) • Dimensions and installation: • Cutting table: 17-section Additional equipment • Filter unit: ECO 16 CT (extraction/filtration)

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, Working table 12500x2500 Plasma 3D Generator ESAB Precision Plasma Arc 360 Filter unit Sideros Oxy cutting torches 2pcs Ljdpfjzracysx Abzeag Uninstalling and installing is not included and has under the buyer's responsibility. Machine is available starting from October 2026.

Condition: excellent (used), I sell Esab LTG150 welding machine in very good condition. Ledpfxeu Sun Eo Abzoag

Condition: good (used), Year of construction: 2010, total height: 765 mm, total width: 765 mm, total length: 2,790 mm, overall weight: 3,000 kg, set 1 (5 x in stock)  Driven Master unit CD-30 set 1 (5 x in stock) Idler Slave unit CI-30  Laedszw Hnmjpfx Abzeg Load capacity drive 15 ton Load capacity idler 15 ton Turning capacity combi 45 ton turning speed 130 - 1300 mm/Min Wheel size diameter 520 mm Wheel size width 176 mm Load capacity per section:15T Vessel range Minimum: 466 Vessel range Maximum: 6300Ø Variable rotation: yesRpm No of wheels per section:2+2 Wheel dimensions: 570 x 176Ø x mm Number of matching pieces:5 Length: 2790mm Width: 765mm Height: 765mm Weight: 3000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, welding current max. 250 A open-circuit voltage max. 66 Volt connected load frequency 400 V weight 65 kg Lodpfx Aey Aa Itobzsag Dimensions (LxWxH) 900 x 500 x 750 mm MIG/MAG gas-shielded welding machine: incl. 3m hose package.

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 77249, input voltage: 220 V, cutting length (max.): 2,500 mm, cutting width (max.): 1,250 mm, input current: 1 A, ESAB-HANCOCK oxy-fuel cutting machine UXB 12.5 – manufactured in 1994 – fully functional For sale is an oxy-fuel cutting machine from the manufacturer ESAB-HANCOCK GmbH, type UXB 12.5. The machine is in fully functional and operational condition. It was rarely used in our company and therefore has relatively low usage. Technical data: Manufacturer: ESAB-HANCOCK GmbH Type: UXB 12.5 Machine no.: 77249 Year of manufacture: 1994 Connection voltage: 220 V Frequency: 50 Hz Condition: used, fully functional Inspection & collection: Ledpfozxqa Asx Abzsag The oxy-fuel cutting machine can be inspected on-site and tested for functionality after prior appointment. The sale is exclusively for self-collection. Dismantling, loading, and transport must be arranged beforehand. We will gladly provide further technical information, dimensions, or additional images if there is serious interest.

Condition: used, table length 400 mm table width 400 mm table load 250 Kg table diameter 400 mm swivelling range 135 Grad turning speeds 0,2 - 3,0 stufenlos U/min total power requirement 0,3 kW weight of the machine ca. 0,115 t Laodpfx Aoz Dkywebzog dimensions of the machine ca. 1,2 x 0,8 x 1,5 m Welding turntable with - footswitch - manual tilt/swivel - remote control - infinitely variable speed - machine base frame

Condition: used, Year of construction: 2008, total width: 2,400 mm, total height: 2,500 mm, total length: 8,000 mm, Colour: Grey Empty weight: 8.000 kg Track: 8000x4500mm Travel: 6000x2500mm Sheet-thickness: 2-40mm plasma, 150mm autogeen Off-line software: Libellula Many belongings and consumables. Without exhaust-system - Year: 2008 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Drive system: CNC - Resonator brand: Precision - Resonator type: Plasmarc 401 - X-axis travel [mm]: 6000 - Y-axis travel [mm]: 2500 Lodoz Aipqopfx Abzeag - Table length [mm]: 6000 - Table width [mm]: 2500 - Max. material thickness [mm]: 40 - Options: Offline software, Oxy-fuel cutting - Control type: Vision 52 - Transport dimensions: 8000mm x 2400mm x 2500mm (l x w x h) - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, current intensivity 400 A open-circuit voltage 65-75 V IP protection class IP21 Permissible load at 35% duty cycle 400 A at 60% duty cycle 315 A Ljdpfx Abod Ih R Njzoag at 100% duty cycle 250 A Idle power 0.49 kW Application class: S - Water cooled - With hand and foot remote control - Incl. Hose package approx. 6000 mm

Year of construction: 2011, condition: ready for operation (used), Offered for sale is an Esab CNC plasma cutting machine. Track gauge: 3000mm, max. cutting width: approx. 2500mm, max. positioning speed: approx. 25m/min, cutting process: plasma, control: Esab CNC control. Machine dimensions X/Y/Z: approx. 4425mm/1676mm/1930mm. Inspection by appointment possible. Lsdpfx Abjzrzpnozeag

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system -Manufacturer: Esab, PULS MIG/MAG welding machine -Type: LUD320W -Max. welding current: 320 A -Features: Water-cooled, remote control -Wire feeder case: Esab MEK 44 C 4-roller drive Ljdpjy Ulrnefx Abzsag -Dimensions: 1130/640/H1630 mm -Weight: 174 kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, ESAB Alpharex AXD 5 axis Gantry Laser- 5KW Trumpf Resonator- Year 2007. 26 metres x 5900mm Table. Bevel cutting. Max 25mm Thickness. Lajdszc Nzuspfx Abzsg

Condition: used, Welding rectifier, electrode welding machine, electrode welding machine, electrode welding rectifier -Manufacturer: ESAB, welding rectifier type Origo Arc 410c -Welding power: max. 400 A -Welding cable with electrode clamp -Ground cable -Quantity: 1 piece available Laodpfx Abohgbxhozog -Dimension: 920/720/H930 mm -Weight: 182 kg/pc.

Condition: ready for operation (used), Year of construction: 2020, laser power: 54,000 W, number of axes: 3, This 3-axis ESAB SUPRAREX 3100 SXE was manufactured in 2020. It features high-definition plasma cutting technology with a maximum tube length of 8,000 mm and a maximum tube diameter of 750 mm. The machine includes advanced bevel cutting capabilities and a robust construction with precision guides. If you are looking to get high-quality tube cutting capabilities, consider the ESAB SUPRAREX 3100 SXE tube cutting machine we have for sale. Contact us for further details. • Cutting technology: High Definition Plasma • Tube capacity • Max tube length: 8,000 mm • Min/Max tube diameter: 100 mm / 750 mm • Min/Max wall thickness: 3 mm / 20 mm • Cutting capabilities • Straight cutting, bevel cutting, V bevels, Y bevels, 3D tube cutting • Axis configuration / movements • X (longitudinal): Double synchronized brushless drive with electronic axis control on both sides of the gantry; guide length 11,000 mm; double motorization • Y (transversal): Brushless drive with rack and pinion transmission • Z (vertical): Motorized torch positioning axis, speed up to 4,000 mm/min • Tube rotation axis: Synchronized spindle for tube rotation, tube length up to 8,000 mm • Bevel head – VBA WRIST • Rotation: ±540° • Tilt/bevel adjustment: ±60° • Cutting bevel angle: ±45° • Max tilt speed: 38°/sec • Tangential control during cutting • Arc-voltage torch height control • Mechanical feeler torch height control for bevel cutting • Torch collision protection • Machine construction • Heavy-duty machine frame • Longitudinal and transversal precision guides • Precision rack & pinion drive system • Brushless motors • Chuck / spindle • Synchronized spindle for tube cutting • Chuck size: 500 mm • Through hole: 150 mm • Tube supports • 3 manual support carriages with trapezoidal screw positioning • Plasma generator • Model: ESAB iSeries300i • Max current: 300 A (range 5–300 A) • Output voltage: 180 V • Power supply: 380 V / 50–60 Hz • Duty cycle (40°C): 100% • Maximum output power: 54 kW • Process gases • Plasma gases: Air / O2 / Ar-H2 / N2 • Shield gases: Air / N2 / O2 / H2O • Generator dimensions Lasdpjy Ephajfx Abzsg • 1219 x 898 x 1031 mm • Control system • ESAB VISION T5 CNC • 18.5” colour touchscreen, glove operable • OpWizard operator assistance software • Software • ESAB Tube Cutting Programming Software Additional equipment • Flat cutting table with slats, 1,500 x 1,000 mm

Condition: good (used), functionality: fully functional, load capacity: 3,500 kg, Equipment: foot remote control, 3-axis ESAB welding positioner, in very good condition. Complete with accessories. Lsdpfszfpp Aex Abzeag

Condition: good (used), Year of construction: 2001, total height: 2,100 mm, total length: 3,200 mm, total width: 1,000 mm, overall weight: 12,000 kg, plate diameter: 5,000 mm, Welding positioner ESAB - DB-150 MACH-ID 9796 Make: ESAB Type: DB-150 Year: 2001 1 x Driven Master unit 150 ton 3 x Slave Idler unit 150 ton Vessel diameter 1000 - 5000 mm Wheel diameter: Wheel width: Rotation speed 10 - 1000 mm/Min Load capacity per section:150T Vessel range Minimum: 1000 Vessel range Maximum: 5000Ø No of wheels per section:4 Length: 3200mm Ljdpfszw Hh Hjx Abzjag Width: 1000mm Height: 2100mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, empty load weight: 10 kg, Voltage: 380 volts. Welding strength: 250 amperes. Weight: 10.5 kg. Multiple units in stock. The machines are used but in good working condition. Price: € 300,- excl. VAT Lajdjzy D Nmepfx Abzsg