Used Tape Machine for sale (64,982)

Condition: new, Year of construction: 2025, Table saw/router combination minimax twf 55 es M 3 UP Professional machine for skilled tradesmen, featuring motorized height and tilt adjustment of the router spindle, four speeds, and electronic control. Article number 5502266 Brand Holzkraft / SCM FEATURES Features Aluminum sliding table ✔ Handle on the sliding table ✔ Router fence FLEX ONE: heavy-duty professional version, automatic adjustment of the entire router fence depending on the tool diameter, manual adjustment of the chip removal, swing-away mechanism, aluminum fence jaws with connecting strips Spindle height adjustment motorized Telescopic miter fence with two folding stops Spindle tilt adjustment motorized Extension table ✔ Control Ready 3: Programmed movement of the routing unit in two axes, automatic adjustment of the entire router fence depending on the tool diameter, stepless adjustment via switch or automatic positioning system Arc routing guard ✔ Position of the controls Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg Width/Depth (product) approx. 2000mm Connection for dust extraction Dust extraction port diameter 2 x 120mm Work table Work table length 1200mm Sliding table length 1200mm Iiodpfx Ajhp Rc Ishyjh Work table width 530mm Sliding table width 360mm Table height 900mm Sliding table height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width/depth 2910mm Working area length 1600mm Explanation of space requirement The dimensions take into account maximum travel distances or usable lengths. Working area width/depth 2300mm Machine body length 1200mm Explanation of working area Please add the specified dimensions to the space requirement to obtain the recommended clear installation area for the machine. Electrical data Connection voltage 400V Power of drive motor 5.0kW Mains frequency 50Hz Router spindle Spindle tilt 0 to -45° Router spindle speed display Display on the control panel Usable spindle length 125mm Spindle arbor diameter 30mm Spindle speed(s) 3500/6000/8000/10000 min¯¹ Router tool diameter max. Tool diameter max. 240mm Tool diameter max. for profile routing 240mm Tool diameter max. for plunge routing 230mm

Condition: new, Year of construction: 2025, Edge grinding machine with an overhead feed mechanism What distinguishes the Uniq-S from the Uniq is the feed system integrated into the machine table, featuring a rubberized feed belt and an overhead pressure bar. This significantly simplifies the grinding and production of bevelled and chamfered edges, as well as the serial grinding of workpieces. Furthermore, it provides assistance when processing exceptionally large or small parts. The feed speed can be continuously adjusted between 3 and 15 m/min. A soft conveyor belt at the bottom and rubberized rollers on the upper pressure bar gently convey the material. An optional second, lower conveyor belt is also available. The upper pressure rollers can also be replaced with a rubber band, which is particularly helpful when grinding extremely small parts. Isdpfxshqb Rcs Ahyeih The Uniq-S is recommended as an all-rounder that enables all types of processing – from solid wood to fine veneer edges – with high quality. The continuously adjustable feed speed allows for optimal adaptation to the material. 1. Grinding station: “Veneer side” 2. Grinding station: “Solid wood side” 3. Grinding station: “Additional table” 4. Grinding station: “Half-round table” Location: Available from stock in 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, The Hebrock K 36 Top model with motorized adjustment – a new machine. This Hebrock bestseller offers unprecedented possibilities. Developed for the highest standards, the K 36 stands for absolute reliability and productivity in daily use. By enabling the machine to be equipped with a stepped cutter and a multi-radius trimming cutter, Hebrock sets new standards in the field of perfect edge finishing for various edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 min. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 140 mm Feed speed: approx. 15 m/min Ready for operation: approx. 6 min Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 phases – 50 Hz Work table height: approx. 900 mm Iiodpfsi Am Ukox Ahyoh Machine dimensions: approx. 5250 x 1230 x 1430 mm (L x W x H) Weight: 1750 kg Equipment: Hebrock K 36. - 15 m/min Edge banding machine K36 With PLC control (incl. 15'' touchscreen), hot melt adhesive application to the workpiece for edge material up to 3 mm; trimming cutter (incl. diamond tool) up to 3 mm cutting depth, maintenance-free, coated glue tank with interchangeable tank preparation including glue discharge device, high-frequency double-motor trim saw station (approx. 12000 rpm), high-frequency milling station (approx. 12000 rpm) with pneumatic milling adjustment and interchangeable cutter (combination design), corner rounding cutter, radius trimming cutter, flush trimming cutter (incl. pneumatic retraction device), cleaning station, robust chain drive, ball-bearing double roller pressure, unit sight window from the machine rear and operator side, signal lamp for workpiece sequence, pull-out workpiece support, feed speed approx. 15 m/min, edge banding up to 60 mm workpiece thickness 36/08/1 Quick-change preparation for corner cutter 36/08/2/1 additional interchangeable motor for corner cutter R=1 36/09/1 Multi-radius trimming cutter 36/24/1 Release agent spray device 36/24/2 Cleaning agent spray device 36/25 Edge protection spray 36/27 Nesting (1x milling station + 1 x radius trimming cutter) 36/30 Pneumatic 3-point adjustment 36/30/1 Multi-tool for high-frequency milling station (R2/R1/chamfer) 36/45 Axis package Motorized adjustment for panel, edge thickness, and trimming cutter depth adjustment Location: in stock, 54634 Bitburg Available upon agreement.

Condition: as good as new (ex-display), Year of construction: 2024, The robust Junior R1 offers all the features that a modern edge sanding machine should have. A solid, cast iron grinding unit with a powerful motor ensures maximum sanding performance. The work table, which is height-adjustable by spring pressure, allows for optimal belt utilization and safe operation. Optionally, a belt oscillation, stepless unit swivel, veneer sanding device, and an additional table for sanding work on the idler roller can be retrofitted. The machine is supplied with a range of sanding belts; a miter and angle stop are also included in the scope of delivery. Technical data: • Motor power: 2.2 kW • Sanding belt size: 150 × 2280 mm • Sanding belt speed: 22 m/sec Iiedpfx Ahjd R Ev Djyeh • Table size: 750 × 350 mm • Space requirement: 1000 × 800 mm • Weight: from 180 kg • Dust extraction diameter: 100 mm Location: In stock at warehouse 54634 Bitburg - free for collection - Can be shipped for an additional fee.

Condition: new, Year of construction: 2024, The Uniq series is a full-fledged base model in our product range and shares all the characteristics that have made the Kündig edge sanding machine renowned in the market as a robust, versatile precision tool. Part of its extremely robust construction is the motor-driven oscillating sanding unit, which offers a maximum oscillation stroke of 90 mm and the possibility of motor-driven inclination of up to 45°. All common edge processing operations can be performed at the up to four sanding stations. Kündig Uniq edge sanding machine, front and rear Ingenious design – the sanding unit The heart of all our edge sanding machines is the sanding unit. It offers a range of intelligent functions and features. For example, in our machines, the sanding belt does not oscillate by tilting the belt rollers. Instead, the entire sanding unit moves up and down. The oscillation stroke, as well as the oscillation range, are easily set by pressing a button. Thanks to the flexible adjustment and the large oscillation stroke, sanding belts can be used optimally over their entire width, without laborious adjustment of the worktable height. The oscillation mechanism is driven by a separate motor. The tilting of the sanding unit is also conveniently done using a rotary switch and with the help of its own motor. The unit can be tilted between 90° and 45°. Thanks to the well-thought-out pivoting mechanism, the full oscillation is always available and simultaneous sanding on both sides is possible. The different table heights of the front and rear sanding stations also ensure that the belt is not used at the same height at the same time. Furthermore, the combination of the pivoting mechanism and the different table heights ensures that the distance between the sanding unit and the worktable remains minimal at every angle of inclination. Changing the belt is also quick and easy, taking only seconds. Iisdpfx Aefig Rwohyjh The four sanding stations 1. Sanding station: "Veneer side" The front sanding station is used for the precise calibration of materials and functions like a planing machine. The feed stop is adjusted using a rotary handle to set the material removal to within a tenth of a millimeter. Importantly, the stop is not tilted. The feed stop, sanding pad, and discharge stop are always parallel to each other. Rounding of workpieces is thus excluded. Fine adjustment of the sanding pad for grain compensation or setting to zero between stops and pad is possible via a handwheel. The massive worktable is fitted with sliding pads on this side. 2. Sanding station "Solid wood side" This station is ideal for sanding flat, angled, chamfered, or externally rounded workpieces. Again, the entire sanding unit oscillates. The belt runs across its entire width on a graphite surface that keeps it cool. On the solid wood side, there is also a mitre stop. Supplied accessories: Half-round table Additional table with sanding rollers Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, The Hebrock F 2 Iijdpfjlht Hzox Ahyoh The 3.3 m long F 2 is not only attractively priced and space-saving. It also features the equipment you need to process edges perfectly from the start: diamond-tipped joining cutters guarantee excellently prepared workpieces for edge banding. The equipment includes a joining unit (up to 2 mm cutting depth), the top-mounted quick-heating glue tank, a mitre saw, and a combination milling machine. Optionally, the F 2 can also be equipped with a surface scraper blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot melt glue application to the workpiece for edge material up to 3 mm; joining cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank provision including glue outlet device, HF mitre saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 carriage F2/30 pneumatic 3-point adjustment (radius, bevel, flush milling)

Condition: new, Year of construction: 2026, LAB 300 PLUS F 16 TERSA - Universal combination machine with aluminum sliding table and three milling speeds for sawing, milling, planing/thicknessing, and optional mortising torsion-resistant steel cast iron construction machine table made of cast iron, hardened and ground easy-running, anodized aluminum sliding table, 10-year warranty on wear of guide rails large fence system with extendable aluminum telescope fence and folding stops with combination saw fence with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, pivotable from 90°-45° helical steel feed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit Scope of delivery: Combination fence/parallel fence Arc milling guard Tersa cutterhead Anodized aluminum sliding table Aluminum fence cheeks Folding stops Eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Item No. 5500314 Technical data ---Technical data circular saw--- Fence length 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. ripping width to the left of the saw blade 1660 mm Cutting width on the parallel fence 800 mm Saw arbor speed 3500 rpm Saw blade inclination 90° - 45° ---Technical data planer--- Working width 300 mm Planer table length 1260 mm Cutterhead speed Cutterhead diameter / number of planer knives 72 mm / 3 pcs ---Technical data thicknesser--- Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm Feed rate 7 m/min ---Technical data table saw--- Usable spindle length 100 mm max. tool diameter 180 mm, can be recessed max. tenon tool diameter 275 mm max. tool diameter, can be recessed 140 mm Spindle speed 3500/600/800 rpm Iedpfx Ahscnxa Neyoih Spindle diameter 30 mm Motor power 400 V / 50 Hz / S6 - 40% 4 kW (5.5 hp) S6 40% Weight 430 kg Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Sliding table with ball bearing system equipped with a proven ball bearing system permanently easy-running thanks to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and the trapezoidal rail 10-year HolzKraft warranty on wear of the carbide guide rails Dust extraction hose connection The dust extraction ports of the planer (1) and thicknesser (2) point in the same direction. The dust extraction hose can therefore be connected to the machine from the same side for both types of planing. You do not need a hose that goes around the machine. Planing units helical steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent the workpiece from kicking back 3-knife cutterhead ensures an optimal planing result

Condition: new, Year of construction: 2026, HSBM 2020-20 SB – Manual Swivel Bending Machine HSBM SB – Manual swivel bending machine in a heavy-duty design with segmented upper tools Easy to operate Segmented upper tools Swivel bending function with secure clamping of the workpiece through pre-tensioning of the upper die Heavy, compact welded construction For simple bending with precise adjustment of the bending angle using a stop with a scale Particularly low maintenance Segment division 25-30-35-40-45-75-100-150-200-200-270-400-400 Ijdpfscnxc Njx Ahyeih Note regarding technical data: Sheet thickness max.: Performance data refer to material with a tensile strength of 400N/mm²; Bending capacity stainless steel: Factor 0.75; Bending capacity aluminum: Factor 1.2; Hardened upper tools are required for bending stainless steel. Model: HSBM 2020-20 SB Article no.: 3772920 Technical data Working width max.: 2,020 mm Bending capacity max. steel 400 N/qmm: 2 mm Bending capacity max. steel 400 N/qmm without die extension: Bending capacity max. steel 400 N/qmm with die extension: Bending capacity max. stainless steel: 1.5 mm Bending capacity max. aluminum: 2.4 mm Bending angle max.: 135° Segment division Clearance between upper and lower die max.: 120 mm Length: 2500 mm Width: 710 mm Height: 1500 mm Weight: 1,020 kg Location: Ex works - free loading -

Condition: new, Year of construction: 2024, Axis distance: 920 mm X-axis: 3000 mm Material thickness: Z 12 mm - 30 mm Feed rate: 20 m/min. A-axis: 360 degrees Minimum dimensions: Iijdpscnz H Hjfx Ahyoh Plate: x = 300 mm Y = 120 mm z = 12 mm The machine is equipped with a 4-position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade moves in the X-direction. Max. cutting depth with saw blade: 10 mm Motor: 0.75 HP, 400 volts Required extraction capacity: 2300 m3/h Location: In stock, 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1982, with 2 drilling beams Used, good condition Make Scheer Type DB 3 Year of construction 1982 Machine no. 73021 Number of spindles: 25 Number of drill beams: 2 Spindle spacing/grid: 32 mm Drilling from above Hydraulic feed brakes: 2 Linear stop: 1 approx. 2500 mm Working width: approx. 800 mm (768 mm) Drilling depth: approx. 100 mm stroke Drill chuck: M 10 Pendulum stops: 3 Iisdpsv Trlmofx Ahysh Clamps: 3 Drill programs: 4 Space required: approx. 1400 mm x 1300 mm x 1800 mm Weight: approx. 1000 kg Location: Arrives at the end of April at warehouse 54634 Bitburg - free on freight - Handed over in the current condition, as seen, without overhaul, without warranty or guarantee

Condition: new, Year of construction: 2025, Martin Panel Saw T 77 - New Stock Machine - Top specification - Tiltable to both sides - Equipment: T 7710/2-a Saw Unit Prex – tiltable to both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit T 7757-a Scorer illumination Safe Light T 777572-a MITRE cutting system RadioCompens with continuous support T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at operator level Classic Location: ex stock 54634 Bitburg - available immediately - Iisdpfx Ahow D T Dkjyjh

Condition: new, Year of construction: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE Specifically designed for staircase construction Complete in standard configuration according to price list 01/19/D, featuring: - Precision collet chuck for ER40 collets Ø 3-26 mm, incl. collets Ø 10 / 13 / 16 / 20 - Pole-switchable motor 1400/2800 rpm, 1.5 kW - Line laser with bracket - Boring unit, continuously rotatable from the front (65°-0°-65°) Isdpfx Ahexdttpoyoih - Position setting via digital counter - Position adjustment for 2 levels, pneumatic (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm pitch with central detent and lateral adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for oversized frames 1 stop rod, approx. 850 mm long (can be reversed from left to right) 2 flip stops - Mortising unit lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, dust-tested, Ø 80 mm Double miter stop adjustable from 0°-60° Pneumatic clamping of the X-axis with on/off switch at the indexing handle Pair of auxiliary workpiece supports, swiveling (left and right) Clamp column re-positionable to the front Chassis with 4 wheels for easy machine movement 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill bit Ø 25 mm, chrome steel, with centering tip Available: at short notice

Condition: excellent (used), Year of construction: 2001, Kity 629 rotary tiller Motor 2,2 KW/400 Volt Table size approx. 580x715 mm Finely adjustable milling fence spindle swivel + 30° to - 5° Right/left rotation of the milling spindle Speeds 4800/6400/8700 rpm Spindle stroke 130 mm Iiedpfxsr Id S Es Ahysh Tool up to Ø 180 mm Suction connection 2 x 100 mm Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Panhans swivel milling machine type: 245/20 Solid German engineering Table milling machine with one-sided swiveling fixed milling spindle for the swivel range from -5° to +45.5° Positioning control for height and swivel adjustment with height zeroing and offset measurement travel Electronic position and speed displays 4 speeds 3000 / 4500 / 6000 / 9000 rpm Quick belt tensioning device Push button for spindle start and stop Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Lower control panel on rigid frame support Milling fence 216 total adjustment via handwheel and LCD display incl. cast fence plates and aluminum splitter tongues Machine socket Lockable main switch Mechanical motor brake Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30 mm, non-replaceable CE-compliant GS tested Table size 1100 x 760 mm Ijdpfxor Ig H Ts Ahyjih Table height 870 mm Milling spindle not exchangeable 30 mm Clamping height 140 mm Height adjustment 125 mm Suction nozzle 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 800 kg Equipment: Top control panel Swivel +-45 degrees Motor 7.5 Kw Centerx Extendable frame support Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Mandrel-free pipe bending machine RB 54 - NC-controlled, with large program memory Article number: 4300054 NC control for setting the bending angle Up to 50 programs can be saved High-quality, robust design Fast tool change Purely motor drive Automatically returns to the starting position TECHNICAL DATA General information Bending radius max. 162mm Bending angle max. 210° Bending speed(s) 2rpm Torque 2341Nm Dimensions and weights Length (product) approx. 600mm Width/depth (product) approx. 220mm Height (product) approx. 470mm Weight (net) approx. 107kg Bending performance Ijdpfx Ahovk Scgeyoih Bending performance of pipe material 420 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 350 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 650 N/mm² (Ø x wall thickness) 42 x 3mm Electrical data Drive motor power 1.1kW Connection voltage 400V Mains frequency 50Hz Location: from stock - available immediately -

Condition: excellent (used), Year of construction: 2009, Bernardo FM 45 V drilling and milling machine. The FM 45 V drilling and milling machine offers an optimal price-performance ratio thanks to the standard spindle feed. The dovetail guide of the gear head ensures maximum precision and stability. Drilling capacity in steel 32 mm Drilling capacity in cast iron 40 mm Throat 260 mm Spindle speed (12) 50 - 2520 rpm Spindle mount MK 4 Quill stroke 120 mm Quill feed (3) 0.12 / 0.19 / 0.26 mm/rev Table size 820 x 240 mm Distance spindle / table 40 - 485 mm Travel path (x / y) 550 / 190 mm Height adjustment of milling head 400 mm T-slot size 14 mm T-slot distance 55 mm Motor output power S1 100% 0.85 / 1.1 kW (400 V) Ijdpsvutw Hefx Ahysih Motor input power S6 40% 1.1 / 1.5 kW (400 V) Machine dimensions (W x D x H) 1150 x 850 x 1450 mm Weight approx. 285 kg Standard with automatic spindle feed and thread cutting device Large speed range 50 - 2520 rpm (12 levels) Dovetail guide for x, y and z axes, adjustable via wedge strips Versatile application options, slot milling, face milling, boring,.... Solid large cross table, precisely surface-machined Milling: spindle feed via handwheel Drilling: spindle feed via handwheel High-quality aluminum motor, designed for continuous operation Stable and vibration-free cast design Simple and quick speed change using a gear lever Pivoting milling head for angle drilling, milling bevels, etc. Location: from stock 54634 Bitburg - available at short notice -

Condition: good (used), Year of construction: 1993, Omga Pneumatic Corner Frame Assembly Machine Model: Joint 502 For assembling popular types of frames. During the stapling process, the machine operator has a clear view of the frames and can, if necessary, make required positional adjustments. The two frame components are placed into the stop and locked in position by a pneumatically actuated clamp equipped with a special rubber pad to prevent damage to delicate frames. The stop is adjustable, allowing for the insertion of two staples at the desired distance. The Joint 502 allows for two different staples, even of different sizes, to be inserted at the required axial spacing, with the two staple units positioned accordingly. Iisdpfsyy S Uaex Ahyjh Location: Available from stock, 54634 Bitburg - available immediately -

Condition: excellent (used), Year of construction: 2010, Used machine in top condition – training machine – Year of manufacture: 2010 Digital display in Y Equipment and technical data Cutting length: 3300 mm Cutting height: 2200 mm (edge trimming height 2110 mm) Cutting depth: max. 60 mm Extraction: - Saw unit 120 mm - Lath grid 100 mm Workpiece support: - Sturdy plastic support for optimal stability, even for narrow workpieces. Isdpfx Ahezzfr Esysih Tilting roller transport system: Manual for easy and material-friendly transport Locking: Manual, vertical and horizontal Feed: Manual, vertical and horizontal Circular saw blade: Diameter: 250 mm Saw motor: 4 kW at 5450 rpm, 400 V, 50 Hz Folding guide rail: incl. workpiece support for narrow parts with strip stop Dust extraction system in accordance with BG guidelines TRK (below 2 mg of fine dust / m³ of air) Availability: immediate Location: 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, controller model: OKUMA OSP P200M, total height: 3,150 mm, total length: 6,500 mm, total width: 3,000 mm, table width: 630 mm, table length: 630 mm, rotational speed (max.): 6,000 rpm, overall weight: 22,500 kg, spindle speed (min.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 150, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The Okuma MA series is a horizontal machining center with large travels for heavy-duty machining. The X/Y/Z travels are 1000/900/1000 mm. This machine is designed for very high precision and, above all, stability when machining large workpieces. The pallet size is 630 x 630 mm. - OSP P200M - Year of manufacture: 2008 - Cutting time: 17,500 h Iijdpoyg Rb Rjfx Ahysh - Renishaw Tool Eye - ATC 150 SK50 - 2-pallet system - Spindle speed: 6,000 RPM - B-axis NCB 0.001 degree - X/Y/Z 1000/900/1000 mm - Mayfran Consept coolant system with chip conveyor and high-pressure pump 60 bar

Condition: good (used), Year of construction: 2007, functionality: fully functional, spindle speed (max.): 10,000 rpm, DECKEL MAHO DMC 635 V – Year of manufacture 2007 Technical data Manufacturer: DECKEL MAHO / DMG Model: DMC 635 V Year of manufacture: 2007 Machine type: Vertical CNC machining center Control system: Siemens Sinumerik 840D Axes: 3 (X / Y / Z) Working area: X-axis travel: 635 mm Y-axis travel: 510 mm Z-axis travel: 460 mm Table clamping area: 790 × 560 mm Max. table load: 600 kg Main spindle: Max. spindle speed: 10,000 rpm Tool holder: SK 40 Tool changer: Automatic tool changer Tool magazine: 20 positions (typical configuration) Equipment: CNC control system Siemens 840D Automatic tool changer Coolant system with external cooling No internal cooling (without coolant through the spindle) No chip conveyor Feed rate and rapid traverse: Rapid traverse X/Y/Z: 30 m/min Max. working feed rate: 20,000 mm/min Dimensions and weight: Machine weight: approx. 3,600 kg Installation dimensions: approx. 2,000 × 2,650 × 2,350 mm Total connected load: approx. 20 kVA Operating hours: approx. 24,000 Iijdpfjz Symdjx Ahyoh Spindle hours: approx. 7,000 Images will follow.

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Pfaff Creative Icon 2” sewing machine Items for sale: 1x Pfaff Creative Icon 2 with the following accessories: incl. additional embroidery module or embroidery unit incl. ‘Grand Endless Hoop’ fabric or embroidery material incl. embroidery hoop or embroidery accessories Condition: Iiedpsz Sx Ruefx Ahysh This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A video recording of a functional test will be made for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: used, Year of construction: 2020, INTERMAC VERTMAX 3.3 – Year 2020 Maximum sheet size that can be machined: 6000 x 3300 mm Minimum sheet size that can be machined: 500 x 300 mm Machinable glass thicknesses: 4 - 26 mm Suction cup carriage speed: 80 m/min Y-axis speed: 40 m/min Speed of glass feed on input and output roller modules: 30 m/min Electrospindle power: 1 x 9.5 kW (S1), 1 x 6.5 kW (S1) Maximum spindle rotation speed: 12000 rpm Maximum diameter of the front grinding wheel: 150 mm Maximum diameter of the rear grinding wheel: 100 mm Maximum drill diameter: 80 mm Tool coupling: ISO 40 Tool magazine capacity: up to 18 + 19 positions Maximum power consumption: 63 kW Working direction: Left to Right Operating hours: 2302 Iisdpfxjz Sr Hpj Ahyoh

Condition: good (used), Year of construction: 2000, X-axis travel: 710 mm Y-axis travel: 550 mm Z-axis travel: 500 mm Iijdpsz Stdpofx Ahyjh Spindle speed: 50 - 10,000 rpm Control system: Heidenhain TNC 430 Table area: 900 x 600 mm Maximum table load: 1,600 kg Machine weight (approx.): 10,000 kg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, grinding length: 400 mm, grinding width: 200 mm, grinding height: 300 mm, table load: 150 kg, overall weight: 1,500 kg, rotational speed (max.): 2,800 rpm, Working area Grinding length 400 mm Grinding width 200 mm Grinding height 300 mm Optional grinding height 450 mm Maximum table load 150 kg X-axis – Longitudinal movement Table longitudinal travel 10–420 mm Table speed 0.005–35 m/min Y-axis – Vertical movement Distance from table to spindle center 90–415 mm Optional 90–565 mm Vertical speed 100–2,000 mm/min Z-axis – Lateral movement Maximum lateral travel 200 mm Lateral speed 100–2,000 mm/min Grinding spindle Motor power 2 kW Optional motor power 3.7 kW Grinding spindle speed 2,800 rpm Grinding wheel 225 × 25 × 51 mm Dimensions Length approx. 2,000 mm Width approx. 2,300 mm Height approx. 2,300 mm Ijdpez Sra Nefx Ahyeih

Condition: used, Year of construction: 2018, x-travel 620 mm y-travel 350 mm z-travel 400 mm table surface area 820 x 420 mm Maximum weight on the table 300 kg milling head -swivable +/- 90 ° Iedpfjz St Nrjx Ahyjih Speed range - 2 levels 0 - 4.500 U/min feed speeds 0 - 2.000 mm/min rapid traverse 5.000 m/min total power requirement 7 kW weight of the machine ca. 1,65 t dimensions of the machine ca. 2,25 x 1,9 x 2 m