Used Panhans 426 for sale (97)

Condition: used, Thickness Planer Panhans 426 Planing width: 630 mm Planing height: 250 mm Electric height adjustment via positioning control TERSA safety cutter block Table guided on four sides Main motor: 7.5 kW Feed speed: 7 + 14 m/min Segment pressure beam made of solid aluminium Machine is WORKSHOP-TESTED and in VERY GOOD CONDITION Available from stock Lieboch Csdpfeyxdcaex Akcerb

Condition: excellent (used), Year of construction: 1992, For sale is a used Panhans thickness planer, model 426, with a planing capacity up to 230 mm. The machine is in good condition and has been serviced and inspected by our qualified staff. Technical specifications: - 4-knife Tersa cutterblock - Planing width: 630 mm - Maximum height capacity: 230 mm - 2 feed speeds - Extractor connection Ø 160 mm Crodpfx Akjwza Tyeceb - Motor power: 7.5 kW - Year of manufacture: 1992 The planer is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! Related terms: planer, thickness planer, thicknessing machine, Dickte, Felder Reference: R-S24F9

Condition: used, Year of construction: 1993, with Centro-Fix reversible blade Machine cleaned, lubricated, partially repainted made operational, functionally tested fully adjusted Test run Various parts replaced: 4x Tersa blades Rubber guard Used Make: Panhans Type 426 Year of manufacture: 1993 Machine no. 1399 GS wood dust tested Motor 7.5 kW Planing width approx. 630 mm Planing height approx. 250 mm Table guide rollers: 2 adjustable Articulated pressure beam Steel feed roller Rubber feed roller 2 feeds Number of knives: 4 Centro-Fix reversible knives Digital display for planing height Electric height adjustment with handwheel fine adjustment Sound insulation Extraction connection D 160 mm Space requirement approx. 1300 mm x 1100 mm x 1100 mm Total connected load approx. 8.5 kW Codov Hht Tjpfx Akcjrb Storage location: 97447 Gerolzhofen, free on load, unpacked Handed over in the current condition as seen, without guarantee or warranty

Condition: used, Year of construction: 2000, Cutting area: 3200 x 3100 mm Cutting height: 60 mm Saw blade exit: 70 mm Main saw motor: 7.5 kW Max. main saw blade: 280 x 3.2 x 30 mm Z=60 Scoring blade (conical): 125 x 3.2 / 4.3 x 20 mm Z=24 Fence speed stepless: 0-25 m/min. Return: 70 m/min. Saw carriage feed stepless: 0-70 m/min. Storage location: customer Crsdpsy Nzdvjfx Akcsb

Condition: good (used), For sale is a used Panhans milling machine Type 245 with 8 milling speeds. The machine has been inspected and refurbished by our qualified staff and is in good condition. Technical data: - Double swiveling unit - Swiveling range -45° to +45° - Electrically height-adjustable and swiveling - Overhead control panel Codpjy Nncfofx Akcjrb - 8 milling speeds - Direction of rotation switch - Motor power 11 kW / 15 HP - Year of manufacture 2002 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: milling machine, router, milling Reference: R-S1632

Condition: used, Year of construction: 2009, Cutting length: 4200 mm Cutting width: 3200 mm Max. saw blade protrusion: with blade vertical at 0° = 70 mm with blade tilted at 45° = 50 mm Feed speed forward: 0-80 m/min. Feed speed reverse: 100 m/min. Weight: approx. 5400 kg. Motor power: 14 kW Scoring saw: 1.5 kW Tool: diameter: 350 mm bore: 30 mm Extraction port (bottom): 140 mm Extraction port (pressure beam): 100 mm Storage location: Supplier Cjdpfx Akoyf Nu Tscerb

Condition: repair required (used), Year of construction: 1991, Tilting spindle moulder Manufacturer: Panhans Model: 240 Year of manufacture: 1991 The electronic angle value detection (actual value) is not functional. Table: 135 x 80 cm Power: 11 kW Tilting range: -5° to +45° Angle adjustment: Electric Height adjustment: Electric Spindle speeds: 3/4.5/6/9,000 rpm Left/right rotation: Yes Motor brake: Yes Codpox Tgtwsfx Akcorb Weight: approx. 780 kg Incl. power feed

Condition: used, Year of construction: 1987, Used machine Year of manufacture: 1987 Condition: fully overhauled Features and technical data: - Table size: 1100 x 760 mm - Motor: 4.7/5.7 kW, pole-switchable - With forward/reverse operation - Milling spindle: MK 5 / 30 mm - Height and tilt adjustment via handwheel - Spindle speeds: 3000/4500/6000/9000 rpm - Spindle tilt range: -5 to +45° - Milling fence with metal jaws Csdpfx Asw I U U Dokcerb - Mounted on round insert plate, therefore rotatable 360° - With table extension on both sides with retractable frame supports - Equipped with 4-roller power feed unit Weight: approx. 900 kg Images show the machine in unrefurbished condition Availability: approx. 4 weeks after order placement Location: Flörsheim

Condition: used, Year of construction: 1996, Incl. 3-roller feed, control panel on top, table extensions, pull-out support, tilting from -5° to +45°. Location: supplier Crjdpfsy Iddijx Akcob

Condition: used, Year of construction: 1984, Working width: 510 mm Planer shaft: Strip knife Number of knives: 4 Jointer table length: 2200 mm Jointer fence angle adjustable: yes Folding up of jointer tables: manual Maximum thicknessing height: 220 mm Thickness table height adjustment: electric Planing thickness display: Scale Feed speed: 7 / 14 m/min Infeed roller: Steel Outfeed roller: Steel Table rollers: yes Csdpfx Aeyq Rz Eekcerb Motor power: 5.5 kW Motor brake: yes, automatic Extraction connection: 160 mm Machine length: 2200 mm Machine width: 1050 mm Weight: 1050 kg

Condition: used, Year of construction: 1984, Dowel hole drilling unit: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.5 kW Crjdpfx Asx I Aikjkcjb Speed: 2800 rpm Hold-down device: manual Extraction port: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 300 kg

Condition: good (used), Year of construction: 1999, with new Siemens control system, joystick and PC controllable; max. cutting length 4.3 m; max. cutting width 2.2 m; already dismantled Codpfoy I A Nqsx Akcorb

Condition: used, Year of construction: 1998, machine/vehicle number: MR007001, Used jointer with long tables and a planing width of 510 mm. Equipped with electric adjustment of the infeed table. Technical specifications: - Maximum planing width: 510 mm - Number of knives: 4 pcs - Cutterhead type: Standard Cjdey Izbfjpfx Akcerb - Cutterhead speed: 5000 rpm - Table length: 2850 mm - Infeed table adjustment: Electric - Infeed table length: 1620 mm - Outfeed table length: 1170 mm - Tiltable fence: 0–45° - Motor power: 5 HP

Condition: used, Year of construction: 1971, Cutterhead Z = 2, planer knives, planing width 520 mm, fixed fence. Location: Nattheim Codpov I Eatofx Akcjrb

Condition: good (used), Year of construction: 1985, functionality: fully functional, From business liquidation: Panhans model 116, 380 Volt, dowel hole boring unit 16-22-25-32 mm, 2x material clamps, mitre stop, length stop, year of manufacture 1985, 1.5 kW power. Crodpfx Ajy Iurwjkcjb

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Planing width: 630 mm Planing height: 3 - 300 mm Maximum cutting depth: 8 mm Table length: 1100 mm Cutterhead speed: 5000 rpm Feed motor power: 0.55 / 0.75 kW / 0.8 / 1.0 HP Extraction port Ø 160 mm, usable on left and right Feed speed: 7 + 14 m/min Main motor power: 7.5 kW / 10 HP Voltage: 400 V / 50 Hz Space requirement approx. 1070 x 1200 x 1060 mm Net weight approx. 1050 kg TECHNICAL DESCRIPTION Robust German engineering. For thickness planing with a planing width up to 630 mm and planing height from 3 to 300 mm, compact and ergonomic machine dimensions. PANHANS solid steel cutterhead Ø 125 mm with 4 Tersa reversible knives. Pendulum-mounted feed rollers. Segmented rubber infeed and outfeed rollers with Ø 90 mm ensure smooth and secure workpiece feed. With segmented pressure bar. Electric height adjustment of the thicknessing table, tilt-resistant on 4 trapezoidal thread spindles. With finely planed thickness table. Positioning control 4.3" touchscreen. Automatic star-delta start. Mechanical motor brake. Extraction port 160 mm, usable on left and right. Machine calibrated at the factory. CE compliant GS tested Standard equipment as follows: Solid steel cutterhead with 4 Tersa reversible knives Standard quality for 630 mm planing width Rubber infeed roller Rubber outfeed roller Thickness table without table glide rollers Positioning control 4.3" touchscreen Codpfx Asy Eizuokcsrb 2 feed speeds 7 + 14 m/min Touch panel 4.3" Location: Flörsheim Availability: Immediately

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 3 h, For inquiries: Zoltán Utasi +36 30 205 7380 Year of construction: 2021 Condition: as good as new (approx. 3 operating hours) Technical specifications Roller carriage length 3200mm Cutting length 3400mm Cutting height max. 155mm at 90°, 105mm at 46° Cutting width width stop 1250mm Saw blade max. Ø 450mm Table size cast iron table top 1200 x 655mm Additional table extension 750 x 655mm Table extension 1430 x 940mm Table height +/-20?mm 900mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1150kg Technical description For trimming, cutting to length, formatting, mitre cutting etc. The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of grey cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running. The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the full length, guided by hardened and ground round steel guides with remote locking in a 50 mm grid. Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening on the wide side Length stop on the cross slide with mm scale and telescopic extension extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre fence on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) can be quickly set using a fixing system. Electromotive width stop with cutting width 1250 mm to the right of the saw blade, dimension input on the control panel at the top via positioning control to 0.1 mm, stop can be folded down for free table surface; Safety cut-off bar between width stop and roller carriage in case of crushing hazard With pull-out tool drawer Top operation with control panel positioned at eye level, swivelling, incl. Including template holder and with 7" touchscreen control for cutting height, swivelling adjustment and speed Electromotive height and swivelling adjustment via positioning control Swivelling range of the saw blade from 0° - 46° Digital displays for degree setting, cutting height, speed and cutting width Codpfx Ajq H Sqdskcorb APA saw blade quick-clamping system Safety guard can be swivelled to both sides, Protective cover with interchangeable wide/narrow insert Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400mm can be lowered under the table Extraction nozzle Ø 120mm on the machine body, Ø 80mm on protective hood CE conformity GS tested Length stop analogue Cross slide standard Cutting length 3400 mm Three-phase motor 5.5 kW Width stop 1250 mm electromotive Scoring unit 1750 0.55 KW (0.75 HP) With manual height and side adjustment via external handwheels externally mounted hand wheels With saw blade quick clamping system APA Quickstep scoring system Tool-free manual adjustment adjustment of the scoring width From 2.8 to 3.8 mm with 0.05 mm grid adjustment per single step, incl. 1 Set of saw blades 125 x 2.8 - 3.8 x 50mm | Z = 12+12 Replacement HM scoring saw blade 125 x 2.8 - 3.8 x 50 mm Z = 12+12 (set = 2 pieces) for QuickStep scoring system

Condition: used, Year of construction: 1991, Table size: 1100 x 760 mm Table height: 870 mm Cutter spindle mount: MK 5 Speeds: 3000/4500/6000/9000 rpm Height adjustment: 120 mm Table opening swivel plate diameter: 450 mm Swivel range: -5° to +45° Weight: approx. 850 kg Storage location: Supplier Crsdpsx It Anofx Akcsb

Condition: used, Year of construction: 2002, Carriage length: 3200 mm Cutting width at rip fence: 1300 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 150 mm Scoring unit: yes Saw blade swivel range: +45° Csdpfx Akoyq R Acocsrb Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: electric Saw blade angle display: digital readout Cutting height display: digital readout Rip fence display: digital readout Crosscut scale display: scale Scoring unit adjustment: electric Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Extraction port: 80 and 120 mm Machine length: 3500 mm Machine width: 2300 mm Weight: 1200 kg

Year of construction: 2000, condition: used, Milling stop adjustment: via handwheel Milling stop measurement display: Siko counter Milling jaws adjustment: handwheel Milling jaws measurement display: Siko counter Csdpfx Akoy A Hi Rjcjrb

Condition: ready for operation (used), Year of construction: 1987, machine/vehicle number: 402, functionality: fully functional, cutting height (max.): 70 mm, cutting width (max.): 3,200 mm, saw blade diameter: 300 mm, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 70 mm, Equipment: scorer, Cutting length: 3200 mm Cutting width: 3200 mm Width stop: Gear motor adjustment Main saw unit: saw blade Ø 300, Ø 30, Z=60, SH 70 Scoring unit: yes - saw blade Ø 125, Ø 20, Z=24 Softforming unit: no Side pressure unit: yes - Version: FR 50/100 Residual cutting device: yes - Pressure beam recess Veneer cutting device: yes Trimming device: yes - Spacing: 145/525/1790 Support table front: 400 x 1400 mm - 2 pieces Rear support table: 240 x 2960 mm - 1 piece Support bars rear: 40 x 2960 mm - 5 pieces Angled table: 480 x 1400 mm left Angle ruler: with pull-out Collets: 4 pieces - floating - distance 70/400/1600/2800 Stop jaw: 2 pieces - rigid - distance 1000/2200 additional foot at the rear : no - 3 feet Crsdpfxovi H Dij Akceb safety guard: yes foot switch : no Machine cuts from: left to right unit can emerge in any area: no automatic lowering with saw overtravel: no 3-step cutting height adjustment: no Main circular saw: 7.5 kW, 380 V, 2870 rpm, 50 Hz Scoring saw: 1.1 kW, 380 V, 2800 rpm, 50 Hz Width stop adjustment motor with torque compensation: fine input motor: 0.12 kW, 380 V, 1380 /min, main motor: 0.35 kW, 380 V, 1350n.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, planing width: 630 mm, number of planer blades: 4, Equipment: motor brake, Panhans Thickness Planer 436 DH 400 – 630 mm – Tersa – 7.5 kW – Excellent Condition Cedpfjw U Thisx Akcorb For sale: Panhans thickness planer type 436 DH 400 in excellent condition. Robust, precise machine with electric height adjustment, digital display, and Tersa quick-change system. Technical data: Planing width: 630 mm Planing height: 250 mm Motor: 7.5 kW Feed speed: 7 + 14 m/min Table length: 1,110 mm Weight: approx. 700 kg Price: €8,900 net (plus VAT) Shipping by freight company possible Available ex stock Haldensleben

Condition: good (used), functionality: fully functional, power: 5.5 kW (7.48 HP), planing width: 510 mm, number of blades: 4, overall weight: 1,000 kg, Equipment: documentation/manual, For sale is a high-quality combined surface planer and thicknesser Panhans 445/A in very well-maintained condition. The machine is being sold on behalf of a customer (private sale) and comes from the workshop of a hobby woodworker who is switching to separate machines (planer and thicknesser). Technical specifications: + Manufacturer: Panhans + Model: 445/A + Motor power: 5.5 kW with motor brake + Connection: 400 V (three-phase) + Planing width: 510 mm + Planer table length: approx. 2200–2250 mm + Thicknessing height: approx. 200 mm + Feed speed: 2-stage (approx. 7 / 14 m/min) + Cutter block: 4-knife cutter block + Extraction port: approx. 160 mm + Weight: approx. 1000 kg Cedpfx Ajy Efb Rokcsrb Features & highlights: + Suvamatic cutter block guard (high safety standard) + Aigner auxiliary fence + Various manuals/documentation + Multiple sets of planer knives included + Panhans setting gauge + Heavy-duty industrial quality – durable and precise + Large, precision-ground planer table + Tilting planer fence (up to approx. 45°) + Convenient switch between surface planing and thicknessing + Smooth operation and powerful motor Condition: Technically flawless Ready for immediate use Well-maintained with only hobby use Minor, normal signs of wear Important information: Sold on behalf of customer (private sale) No warranty or returns Inspection and test run possible by arrangement Collection only (forklift for loading available)

Condition: used, Year of construction: 1987, Sawblade tiltable 45 ° Length of the rolling table 3200 mm cutting width 1000 mm Codpfxevyuqro Akcjrb Motor output 5,5 kW weight of the machine ca. 1000 kg

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, power: 11 kW (14.96 HP), spindle diameter: 40 mm, overall weight: 1,500 kg, milling spindle length: 150 mm, Double-sided swivel unit bearings with two sturdy segment guides, modern steel construction column, heavy-walled, heavily ribbed cast iron table, replaceable milling arbor, three-phase motor with 4 speeds, electric height and tilt adjustment in rapid and creep speed, and electronic digital display, incremental dimension switching for height adjustment, milling stop with fine adjustment and metal stop jaws and replaceable aluminum splinter guards, extraction nozzles on the milling stop and below the table, each 120 mm in diameter, minimum extraction speed at the extraction nozzle: 20 m/s, rotating table insert, locked reversing switch for left and right rotation, lockable main switch, cam switch, automatic motor brake Table size: 1350 x 800 mm Table height: 880 mm Motor power: 11 kW MK 5 milling arbor mount Speeds 3000/4500/6000/9000 rpm Mill arbor swivel range: -5° to +45° Height adjustment: approx. 145 mm Control: CNC Table extension on both sides, total length 2500 mm, including extendable frame support Stepless 4-roller feed 2-axis control Mill arbor with 40 mm diameter and 150 mm length Credpfx Akewcpqqecob