Used Feed Machine for sale (66,386)

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Hsdpfxex U Eias Ab Ijk Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: excellent (used), 6 drilling units with two heads two side heads spindles span 32mm max material length 2250mm magazine feeding Hsdpfoyxcwvox Ab Iek manual regulation of units span rotated heads pneumatic top pressure drilling depth regulation

Condition: new, Year of construction: 2015, Factory-new machine, has only been used for test runs, condition is as new. TECHNICAL DESCRIPTION The DIGIT MAGGI throughfeed drilling machine is an automatic multi-spindle throughfeed drilling machine equipped with 2 horizontal heads and 6 vertical heads, designed for high-volume production. TECHNICAL SPECIFICATIONS Number of horizontal heads: 2 Hodsxd Ruwspfx Ab Iek Number of vertical heads: 6 Minimum distance between vertical heads: 165 mm Minimum distance between horizontal heads: 320 mm Distance between spindles: 32 mm Number of spindles in horizontal head (left red - right black): 23 (11 - 12) Number of spindles in vertical head (left red - right black): 11 (5 - 6) Maximum vertical drilling depth: 55 mm Maximum horizontal drilling depth: 65 mm Maximum workpiece dimensions: 2800 x 870 x 50 mm Minimum workpiece dimensions: 250 x 150 x 12 mm Number of motors: 12 Horizontal head motor power: 2 HP (1.5 kW) Vertical head motor power: 1.5 HP (1.1 kW) Number of clamps: 10 Loader feed speed: 57 m/min Working air pressure: 6–8 bar Standard air consumption: 60 l/cycle Maximum clamp height above worktable: 75 mm Overall dimensions: 4150 x 1600 x 1800 mm Worktable height: 950 mm Packaging dimensions: 4300 x 1950 x height 1900 mm

Condition: new, Year of construction: 2021, Linishing machine for flat parts or rectangular tubes. Working capacity (mm) 120x140 Abrasive belt speed (m/s) 20 Abrasive belts (mm) 120x1850 Conveyor belt speed (m/min) 12 or 6+12 Hsdpfx Aog R Sxvjb Ijk Abrasive belt motor (kW) 3 Consumption (A) 7 Dimensions approx. (mm) 975x880x1800 Weight approx. (kg) 350

Condition: new, functionality: fully functional, Year of construction: 2025, coil width: 200 mm, product width (max.): 200 mm, overall weight: 80 kg, warranty duration: 12 months, working width: 200 mm, product height (max.): 3 mm, roll width: 64 mm, Silicon+ SFS 200 Servo Roll Feeder Hodpfovptz Ijx Ab Iek Compatible with all kind of presses, primarily used on Bruderer, Schaal and Mabu machines. Feeding length – min 0.10 mm to max. 9999.99 mm Feeding width – max. 100 mm, 200 mm or 300 mm. Depending of model required. Material thickness – 0.20 – 3.20 mm Feeding angle – 180° Die line height – ± 50 mm Max. feeding speed – 20 m/minute Strip release – Festo pneumatics Control – NC Touch screen Servo brushless motor – 0.75 KW, 1.8 KW or 2.3 KW. Weight approx. feeder: 80-150 kg. Feeder dimensions: 780 X 730 X 680 mm – The unit is driven by the brushless servo motor, with direct drive transmission, eliminate the gear clearance, abrasion, no noise, no lubrication, safely to a synchronized pair of roller segments. – Rolls can be made upon request with PU surface for delicate raw material feeding. – Synchronization of the feeder and punching machine is done easy through cam signal from PLC of a punching machine. – Programmable feeding can be done for up to 10 groups of feeding pitches and saved as recipes. The feed length can be steplessly adjusted during operation EUR 1 certificate of European origin and CE compliance. This information is subject to change without notice, we can make personalized feeders for your needs with prior agreement.

Condition: used, Single-column eccentric press EBU Type 75 SKU Machine no. No. P 4598462 Year of construction 1962 Compressive force 75 ton. throat depth 300 mm Table surface 800 x 620 mm waste hole 325 x 225 mm Plunger surface 470 x 180 mm Clamping pin bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Plunger adjustment 80 mm Installation height max. approx. 420 mm Stroke rate 60 + 105 strokes/min. Motor power 4 kW Mains connection 380 Volt, 50 Hz. - Pneumatic clutch/brake combination EBU - Overload protection with breaker plate in ram - UNIDOR tool monitoring system, type APS MINI - mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds due to 2 V-belt stages on the wheel transmission - Two-handed operation - Simple work area shielding for swinging open - Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and control panel for tool monitoring adjacent Hedpfx Asdzqltsb Ijk - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons good condition

Condition: new, Shaft diameter: 580working speed: 3-6motor power: 30length: 2760width: 2310heigth: 2680weight approx.: 14400 Technical specifications: Hedpfx Abeh Alh Hj Isk Welded steel construction frame 3 rollers are driven Hardened and ground shafts made of high-strength special steel Rollers are hardened and ground Horizontal and vertical working position Hardened standard rollers Mobile control panel Angular side guide rollers Brake motor equipped for precision bending Digital displays (2 pieces) Options: Digital display STANDARD NC unit 10 screen EURO 11,500.00

Condition: new, Year of construction: 2021, machine/vehicle number: 0-250-87-1000, functionality: fully functional, Equipment: CE marking, NEW THROUGHFEED DRILLING MACHINE DRILLTEQ V-200 (BHX 055) Standard features •Drilling head with 13 spindles •Horizontal drilling head with 4 spindles in X-direction •Horizontal drilling head with 2 spindles in Y-direction •Grooving saw D=100 mm (X-direction) •Stop cylinder for workpiece positioning •Workpiece clamping system •Workpiece length: 3050 mm •Workpiece thickness: 12-60 mm Machine operation •WOODWOP 7 FOR MACHINE •Milling motor with frequency inverter 5kW (ETP) Hjdew U Ty Sspfx Ab Isk Documentation •Selected language: Polish, English, German •Documentation on data carrier, paper documentation General information •Year of manufacture: 2021 •Control: POWERCONTROL with POWERTOUCH system •CE-marked •Status: Ready for operation / can be demonstrated •Available in stock

Condition: used, Technical details: plate width: 1000 mm plate thickness: 3,0 mm smallest sheet thickness: 0,5 mm distance between columns: 920 mm Number of Straightening rolls: oben 4x unten 4x Stück / pieces roll diameter: ca. 75 mm number of rollers: 2 oben und 2 unten St. weight of the machine ca.: 6,5 t dimensions L x W x H: 3,8 x 2,2 x 2,1 m This is a sheet metal straightening machine with hydraulic feed. Further features: 4 straightening top rolls Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 straightening bottom rolls Ø 75 x 830 mm, fixed, hydraulic 4 pull-out rollers Ø 110 x 480 mm, 2x top adjustable approx. 20 mm and 2x bottom, hydraulic Roller support Hjdpfevgbgaex Ab Iek Infeed height 1400 mm Hydraulic system equipment Operated externally Recommendation: complete conveyor system (decoiler + loading device + straightener with hydraulic feed) for sale with optional stock no. 0100572. *

Condition: excellent (used), Sorting, feeding and capping machine Cap application and screwing station without filling station Fully automatic filling and capping system by feeding a filling unit with filling needle Cap sorter and capper for lids and caps up to Ø 20 mm Mode of operation When the machine is started, the caps and lids aligned in the sorter are fed under the capping and screwing heads using a feed system. Cappers include screw cappers for screw caps and lid pushers for stoppers and caps 3 x spiral feed bowls for bottles, stoppers and caps 1 x capping station Hedpfx Aeqazcgeb Isk 1 x cap placement station Container height 55 mm Container diameter 20 mm Cap diameter 20 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Further items in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1000042683, feed length Y-axis: 1,300 mm, feed length Z-axis: 80 mm, input frequency: 50 Hz, input current: 63 A, total width: 1,950 mm, total length: 1,950 mm, total height: 3,100 mm, The Brema Vektor 15 is a CNC machining center with a vertical column, designed for processing wood-based panels. The machine can perform drilling, milling, and engraving using a pantograph. It allows for machining on all 4 edges of the panel and profiling thanks to its patented panel transportation system. The machine is equipped with: - A head with independent vertical spindles: 21 (7 on X + 14 on Y) - Horizontal spindles (2L + 2R on X) - Main vertical spindle (milling unit) 7.5kW Hodpfsx Hfh Tox Ab Iok - Automatic revolver-type tool change system, 10 positions Available revolver units: 1. Saw on X 2. Saw on Y 3. Drilling on Y (1R + 1L) 4. Hinge drilling (1x35mm + 2x5mm) 5. Milling 6. Milling 7. Milling

Condition: excellent (used), Alberti machining center complete with: 2 pantographs, 6-position tool changer, saw unit, 25 vertical drilling spindles, 2 + 2 horizontal drilling spindles, 1 + 1 horizontal drilling spindles. Hedpfjyf D U Uox Ab Ijk

Condition: excellent (used), Year of construction: 1988, operating hours: 9,807 h, functionality: fully functional, machine/vehicle number: 17483, NOTTMEYER KOMET SUPER S/PN - very well maintained Hjdox Af D Ropfx Ab Iek - fully functional - available immediately

Condition: new, Shaft diameter: 180Upper Roll Diameter: 60Bottom Roll Diameter: 50working speed: 5motor power: 3length: 1200width: 850heigth: 1200weight approx.: 1000 Technical specifications: Hjdjd Ab H Njpfx Ab Iek - Steel construction welded frame - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal and vertical working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Options: - Digital Readout STANDARD - NC Unit 7 Screen EURO 9.000,--                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   HPK 50 file TypeSizeMin. DiaNotes160x10         20x10600         300Standard Rolls2100x15         50x10600         300Standard Rolls335x35         15x15600         300Standard Rolls4Ø 35         Ø 20600         300Optional Rolls5Ø 70x2         Ø 25x1,51200         400Optional Rolls62”x2,9         1/2”x2,31000         300Optional Rolls770x30x3         30x15x21500         400Optional Rolls8 50x3         20x21600         400Optional Rolls950x50x6         30x30x3600         400Optional Rolls1050x50x6         30x30x3900         600Optional Rolls1160x7         30x4600         400Standard Rolls1260x7         30x4700         400Standard Rolls1360x7         30x4700         400Standard Rolls14UPN 80         UPN 30800         400Optional Rolls*15UPN 80         UPN 301200         600Standard Rolls*         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment         •Capacities are given for 260 N/mm² plate yielding strength          

Condition: new, Shaft diameter: 60Upper Roll Diameter: 215Bottom Roll Diameter: 215high performance hydraulic: 16working speed: 4motor power: 1,5length: 1000width: 1400heigth: 1650weight approx.: 950 Technical specifications: - Steel welded construction frame - 3 Rolls are motor driven - Hardened shafts from special steel material - Top roll hydraulic moveable up-down - Horizontal and vertical working position - Standard rolls - Guide rolls - Brake motor equipped for the precision bending - Mobile control panel Options: Hjdpsd Ab H Rofx Ab Isk - Digital Readout EURO 700,-- - NC Unit EURO 7.000,-- - Angle Lateral Guide Rolls EURO 1.400,--                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   HPK 50 file TypeSizeMin. DiaNotes160x10         20x10600         300Standard Rolls2100x15         50x10600         300Standard Rolls335x35         15x15600         300Standard Rolls4Ø 35         Ø 20600         300Optional Rolls5Ø 70x2         Ø 25x1,51200         400Optional Rolls62”x2,9         1/2”x2,31000         300Optional Rolls770x30x3         30x15x21500         400Optional Rolls8 50x3         20x21600         400Optional Rolls950x50x6         30x30x3600         400Optional Rolls1050x50x6         30x30x3900         600Optional Rolls1160x7         30x4600         400Standard Rolls1260x7         30x4700         400Standard Rolls1360x7         30x4700         400Standard Rolls14UPN 80         UPN 30800         400Optional Rolls*15UPN 80         UPN 301200         600Standard Rolls*         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment         •Capacities are given for 260 N/mm² plate yielding strength          

Condition: new, Shaft diameter: 30Upper Roll Diameter: 148Bottom Roll Diameter: 118working speed: 2-4motor power: 0,7 - 0,85length: 600width: 800weight approx.: 220heigth: 1450 Technical specifications: - Steel frame - Two bottom rolls are powered - Direct drive power system with gears - Top roll is idle ( free turning ) - Hardened rolls - Rolls shafts are special steel material hardened and ground - Double speed motor Hodpfod Eqq Asx Ab Iek - Standard rolls - Adjustable guide rolls - Horizontal and vertical working position Options: - digital display EURO 858, -- Angular side guide rollers EURO 1,287, -- Double speed STANDARD Brake motor EURO 150, --                                                                                                                                                                                                                                                                                                                                                                                                                PK 30 file TypeSizeMin. DiaNotes150x10        20x61800        300Standard Rolls280x15        30x6700        400Standard Rolls330x30        10x10900        200Standard Rolls4Ø 30        Ø 10900        200Optional Rolls5Ø 60x1,5        Ø 25x1,51000        600Optional Rolls61 1/2”x2,9        1/4”x1,8600        300Optional Rolls750x30x3        40x20x21200        800Optional Rolls840x3        30x21200        800Optional Rolls940x40x5        30x30x4600        300Optional Rolls1035x35x5        30x30x4600        400Optional Rolls1150x6        20x3600        400Standard Rolls1250x6        20x3600        400Standard Rolls1350x6        20x3600        400Standard Rolls         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment        •Capacities are given for 260 N/mm² plate yielding strength       

Condition: new, Shaft diameter: 315working speed: 7motor power: 7,5length: 2000width: 1450heigth: 1700weight approx.: 3650 Technical specifications: - Steel construction welded frame - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal and vertical working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Options: Hodoh Alicjpfx Ab Iek - Digital Readout STANDARD - NC Unit 7 Screen EURO 9.000,--

Condition: new, angle iron / side length: 60 x 60 x 6double T-iron over x-axis: UPN 80 UNP 30U-iron over x-axis: UPN 65 UPN 30total power requirements: 3weight approx.: 1,4messurements (LxWxH): 1200 x 1100 x 800 Hedpfx Abjd Acazs Iok

Condition: new, Shaft diameter: 30Upper Roll Diameter: 148Bottom Roll Diameter: 118working speed: 2-4motor power: 0,7 - 0,85length: 600width: 800weight approx.: 220heigth: 1450 Technical specifications: - Steel frame - Two bottom rolls are powered - Direct drive power system with gears - Top roll is idle ( free turning ) - Hardened rolls - Rolls shafts are special steel material hardened and ground - Double speed motor - Standard rolls - Adjustable guide rolls - Horizontal and vertical working position Options: - Digital Readout EURO 600,-- - Angle Lateral Guide Rolls EURO 900,-- - Double Speed Working STANDARD Hedsd Eqqzjpfx Ab Ijk - Brake Motor Option EURO 150,--                                                                                                                                                                                                                                                                                                                                                                                                                PK 30 file TypeSizeMin. DiaNotes150x10        20x61800        300Standard Rolls280x15        30x6700        400Standard Rolls330x30        10x10900        200Standard Rolls4Ø 30        Ø 10900        200Optional Rolls5Ø 60x1,5        Ø 25x1,51000        600Optional Rolls61 1/2”x2,9        1/4”x1,8600        300Optional Rolls750x30x3        40x20x21200        800Optional Rolls840x3        30x21200        800Optional Rolls940x40x5        30x30x4600        300Optional Rolls1035x35x5        30x30x4600        400Optional Rolls1150x6        20x3600        400Standard Rolls1250x6        20x3600        400Standard Rolls1350x6        20x3600        400Standard Rolls         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment        •Capacities are given for 260 N/mm² plate yielding strength       

Condition: new, Shaft diameter: 480working speed: 3-6motor power: 22length: 2500width: 2200heigth: 2300weight approx.: 9300 Technical specifications: - Steel construction welded frame - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground Hedpfx Abeh Alh Rs Ijk - Horizontal working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Options: - Digital Readout STANDARD - NC Unit 10 Screen  EURO 11.500,--

Condition: new, Shaft diameter: 50roll diameter: 155working speed: 4,5motor power: 1,5length: 750width: 1000heigth: 1400weight approx.: 400 Technical specifications: - Steel frame - Two rolls direct driven by a gear system - Rolls are hardened - Rolls shafts are special steel material hardened and ground - Roll shafts housed by bearings - Standard rolls - Guide rolls - Horizontal and vertical working position Options: Hsdpfx Abjd Eqqwj Iek - Digital Readout EURO 600,-- - Angle Lateral Guide Rolls EURO 900,-- - Double Speed Working   EURO 600,--                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   PK 35 file TypeSizeMin. DiaNotes160x10         40x10500         400Standard Rolls2100x15         60x10450         350Standard Rolls335x35         20x20900         300Standard Rolls4Ø 35         Ø 30600         400Optional Rolls5Ø 70x2         Ø 30x21000         500Optional Rolls62”x2,9         1”x2,31000         350Optional Rolls7 70x30x2         50x40x31200         1200Optional Rolls8 50x3         40x31700         600Optional Rolls9 50x50x5         40x40x5800         600Optional Rolls1050x50x6         30x30x31000         500Optional Rolls1160x7         30x4 700         400Standard Rolls1260x7         30x4800         500Standard Rolls1360x7         30x4 700         500 Standard Rolls14UPN 80         UPN 301000         500Optional Rolls*15UPN 80         UPN 301200         800Standard Rolls*         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment         •Capacities are given for 260 N/mm² plate yielding strength          

Condition: new, Shaft diameter: 50Upper Roll Diameter: 152Bottom Roll Diameter: 162high performance hydraulic: 8working speed: 4,5motor power: 1,1length: 810width: 950heigth: 1500weight approx.: 500 Technical specifications: - Steel welded construction frame - 3 Rolls are motor driven - Hardened shafts from special steel material - Top roll hydraulic moveable up-down - Horizontal and vertical working position - Standard rolls - Guide rolls - Brake motor equipped for the precision bending - Mobile control panel Options: - Digital Readout EURO 700,-- - NC Unit EURO 7.000,-- - Angle Lateral Guide Rolls EURO 1.400,--                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   HPK 50 file TypeSizeMin. DiaNotes160x10         20x10600         300Standard Rolls2100x15         50x10600         300Standard Rolls335x35         15x15600         300Standard Rolls4Ø 35         Ø 20600         300Optional Rolls5Ø 70x2         Ø 25x1,51200         400Optional Rolls62”x2,9         1/2”x2,31000         300Optional Rolls770x30x3         30x15x21500         400Optional Rolls8 50x3         20x21600         400Optional Rolls950x50x6         30x30x3600         400Optional Rolls1050x50x6         30x30x3900         600Optional Rolls1160x7         30x4600         400Standard Rolls1260x7         30x4700         400Standard Rolls1360x7         30x4700         400Standard Rolls14UPN 80 Hjdpfx Aed Ab H Seb Iok         UPN 30800         400Optional Rolls*15UPN 80         UPN 301200         600Standard Rolls*         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment         •Capacities are given for 260 N/mm² plate yielding strength          

Condition: new, Shaft diameter: 580working speed: 2-5motor power: 30length: 3000width: 2310heigth: 3100weight approx.: 16500 Technical specifications: - Steel construction welded frame - 3 Rolls are powered Hjdoh Alh Uspfx Ab Isk - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal  working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Options: - Digital Readout STANDARD - NC Unit 10 Screen  EURO 11.500,--

Condition: new, angle iron / side length: 80 x 80 x 8double T-iron over x-axis: IPN 120 IPN 80U-iron over x-axis: UPN 140total power requirements: 4weight approx.: 1700messurements (LxWxH): 1.450 x 1.000 x 1.400 Technical specifications Shaft Diameter: 80mm Roll diameter: 245 mm Driven rollers: 3 Motor power: 4 kW Speed: 6 m/min. Bending performances (cross-section / min. diameter): Flat bar upright: 100x20 mm / 2000 mm; 80x20mm / 800mm; 30x10 / 300 Flat bar lying: 125x25 mm / 600 mm; 60x5mm / 300mm Square steel: 45x45 mm / 500 mm; 15x15mm / 380mm Round steel: Ø 50 mm / 500 mm; Ø 15mm / 380mm tube: Ø 100x2.5 mm / 1,200 mm; Ø 15x1mm / 380mm; Ø 3x5.48 / 800 mm; Ø 1/2x2.77 / 380 mm Form tube upright: 80x25x3 mm / 800 mm; 25x15x2mm / 350mm Form tube square: 70x70x3 mm / 1,300 mm; 25x25x2mm / 350mm Hjdpfxsd Ab H Ts Ab Isk Angle iron leg outside: 80x80x8 mm / 800 mm; 30x30x3mm / 400mm Angle iron leg inside: 70x70x7 mm / 700 mm; 30x30x3mm / 450mm UPN leg outside: UPN 140 / 1600 mm; RPN 120 / 900mm; RPN 100 / 800mm UPN leg inside: UPN 140 / 1,600 mm; RPN 120 / 1000mm; RPN 100 / 800mm IPN lying: IPN 120 / 600 mm; IPN 80 / 400mm gear 3 motorized rollers stable welded steel construction hydraulic Adjustment of the two bottom rollers Digital display of the bottom roller positions on a separate control panel lateral straightening rollers adjustable in 3 axes can be used horizontally and vertically Forward and reverse drive Machine and equipment according to CE regulations Options: NC Unit 7 Screen  EURO 9.000,-- We have more than 190 references!

Condition: good (used), Feed: Manufacturer: ALBA Tip: AVS 400 Hsdpfolz I R Rjx Ab Isk Belt straightening: Manufacturer. George Type: SBK 2 Double straightening and feed line!!! With complete documentation!!