Used Calendar Machine for sale (82,818)

Condition: good (used), Year of construction: 1991, Rilecart PB 796 MK3 year 1991 Dq97Yr Automatic spiral binding machine for the production of booklets and calendars in a single step Binding group 1/4 In production and a test available

Year of construction: 1991, Condition: good (used), Calendar thermal sealing machine Tecnoblock Made in Italy Urvuqlbcd2 machine in good condition, working very well year 1991

Condition: good (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: R80117, working width: 800 mm, input voltage: 220 V, input current: 1,200 A, Due to discontinuation of operation from Norderstedt location, for sale unloaded Binding ratio 3:1 binding width from 70-800mm, 5 wire sections per binding, memory for 30 programs With calendar hanger dispenser from 100 to 500mm Closing tools following diameters: 3/16" (5.5mm); ¼" (6.9mm); 5/16" (8.0mm); Onfmfdewuf 3/8" (9.5mm); 7/16" (11.0mm)

Condition: ready for operation (used), A calendaring machine is available. Working width: approx. 1200mm. New rollers, a new toothed belt and a new motor have been fitted to the machine. New rubberized rollers, a new motor and the air system have been installed in the haul-off. An on-site inspection is possible. Dpsx7L

Condition: used, The TREPKO PKG 1 is equipped with a single stage of all station , the filling head are built to fill various products ie. Yoghurt, Cream, Sauces, Milk, Fruit pieces of 1 cm, Custard, Etc. The easy maintenance makes these machines highly recommended in production floors keeping productivity at a steady pace. Trepko cup fillers are mainly driven by a main motor converting the movement in an INDEX type gear box, signals for the air cylinders to take action on each station. The filling volumes depend on the clients needs, therefor these have a standard filling volume of 50-500 ml per cup, we can enlarge the filling volume by increasing the diameter of the filling cylinder on request. The machine was used for filling Cheese in small rectangular cups, in regards of change overs to 71,75,80,95 mm OUTSIDE DIAMETER Cups we can offer this service in-house. Contact us for more information. Capacity: 2400 c/h (40cps per minute ) Filling volume: 50-500 gr Prefilling: Fruits or flavours Cup dispensing: Automatic Lid applicator: Automatic Sealing: Automatic Out feed conveyor: Automatic E: 3 phase / 50 hz Control panel: PLC SIEMENS Cup format: Currently rectangular on order we can change to your cup size Loaction: IN STOCK Sale: The machine can be sold "as is " TLC Needed or Fully Refurbished. Contact us for more information. Gpgauw

Condition: good (used), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: NG4124682, Wet wipes production line Production speed: 80 packs/min. (72 pcs./package, 5760 pcs./min.) Number of nonwoven fabric unwinders: 12 pcs. Nominal power: 3kW Power supply: 460/277V 3Ph 60Hz Weight: 2000kg Overall working dimensions (without packaging machine): length: 9309mm height: 2961mm width: 4478mm Working units: -nonwoven fabric unwinders, Ba3Txaw8Km -moisturizing section, -cutting section, -wipe stacking section Flow-pack thermoplastic film packaging machine Power supply: 480V ~3 50/60Hz Efficiency: 80 packs/min. Welding: longitudinal, transverse Equipment: -control cabinet; -McLean Cooling Technology air conditioner -1-phase EATON S84N11E03XCE power transformer, 3KVA. -Allen-Bradley 1500P Solid State control panel. Documentation: -humidification section operating instructions (copy) -control cabinet wiring diagram -CLIPPER Rx100 line technical diagram

Condition: ready for operation (used), Book spine roughening machine - folding low-pressure press / Book back roughing - Nipping unit W. Gantenbein RAYear Serial-No. 0106 Working width 20-120mm Roughing length 480mm Press clamp high 80mm Weight 170Kg Space 60-160cm Machine high 95cm Motor 0.4kW Available Immediately - Can be inspected On Stock Drhqbv

Condition: good (used), Rotary creasing machine Multigraf 245.702 Very good condition, ready for production. The set includes creasing tools. The machine is ideal for efficient and precise creasing. Working width 480mm Capacity approx. 1400 rpm Power supply 230V Drfxex Manufactured in Switzerland.

Condition: new, Year of construction: 2025, Functionality: fully functional, total length: 9,500 mm, total height: 2,050 mm, total width: 4,500 mm, travel distance X-axis: 3,030 mm, travel distance Y-axis: 1,520 mm, travel distance Z-axis: 310 mm, Equipment: cooling unit, VS-3015CE 3KW FIber Laser Sheet Cutting Machine Working area (mm) : 3000×1500 X axis travel distance (mm): 1520 Y axis travel distance (mm): 3030 Z axis travel distance (mm)： 310 X/Y axis positioning accuracy ： ≤0.03mm\m X/Y axis repeat positioning accuracy： ≤±0.02mm Max. synthetic positioning speed: 150m\min Max. acceleration: 2G Cbedu8Fvoa Double-sided control panel, adaptive multi-angle placement, simple disassembly, and can fit into a standard 40HQ container. Industrial-grade special air conditioner, constant temperature and humidity for stable performance. Automatic grease and oil injection system, intelligent air pressure monitoring device, and anti-collision detection device provide intelligent protection.

Condition: new, Functionality: fully functional, Year of construction: 2025, The VSI (Vertical Shaft Impactor) sand making machine is a type of crusher designed to accelerate the crushing of aggregate and produce cubical-shaped sand. It is widely used in the field of construction, mining, and other similar industries. Here are key features and information about VSI sand making machines: 1. Working Principle: - The VSI sand making machine operates on the principle of stone impacting stone or stone impacting iron. Material is fed into the center of the rotor, which accelerates to high speed to throw the material outward against a wear-resistant lining. 2. Rotor and Crushing Chamber: - The rotor is a crucial part of the VSI machine and is often designed with multiple pockets to facilitate material throwing and crushing. - The crushing chamber is lined with wear-resistant materials to endure the impact and abrasion during the crushing process. 7Fh2Khz 3. Feedstock Control: - The feedstock (material to be crushed) can be controlled using a variable speed control system, allowing for adjustments to achieve the desired particle size. 4. Material Types: - VSI machines are suitable for processing various materials, including hard and abrasive materials such as rocks, ores, and minerals. 5. Cubical Shaping: - One of the significant advantages of VSI machines is their ability to produce cubical-shaped end products, which is desirable for high-quality concrete and asphalt production. 6. Adjustable Discharge: - The machine usually has an adjustable discharge opening, allowing for customization of the final product size. 7. Sand Production: - VSI sand making machines are primarily used to produce manufactured sand (M-sand) and crushed sand, which are essential components in the construction industry. 8. Maintenance: - Regular maintenance is required to ensure optimal performance and extend the machine's lifespan. This includes checking wear parts, lubrication, and addressing any issues promptly. 9. Variations: - Different manufacturers may offer variations of VSI machines with unique features or specifications. Common variations include open rotor and closed rotor designs. 10. Environmental Considerations: - VSI sand making machines are generally considered environmentally friendly as they produce less dust and noise compared to traditional crushers. 11. Manufacturers: - Well-known manufacturers produce VSI sand making machines, and it's crucial to choose a reputable supplier with a track record of providing reliable equipment. When considering a VSI sand making machine, factors such as feed size, capacity, and the desired end product specifications should be taken into account. Additionally, check the reputation of the manufacturer, and consider customer reviews and feedback regarding the specific model you are interested in.

Condition: refurbished (used), Cycle Bed Mill SMX 5000 >> completely overhauled in 2023, with new machine guarantee Beyqgbgrdml

Condition: used, NEW BUTTER EXTRUDERS AND SHAPING MACHINES BUILT BY New Butter Extruder and Shaping Machines By Butter Extruder and Shaping Machine Butter Extruder Semi - Automatic Butter Extruder, Shaping and Cutting Machine fited on full stainless steel frame, Control panel. Two Stainless steel screw augers, stainless steel hopper. Cutting wires on outfeed conveyor making the machine user friendly . Extruding, Shaping and Cutting Machine Emergency Stop Button. Condition :New Mould Samples TECAFORM AH Blue Our New Special Designed Extruding Outlets TECAFORM AH Blue meets all applicable requirements for declaration of Food Contact. European regiulation EC 10/2011 and Ammednments European Regulation EC 1935/2004 Council Regulation EC 2023/2006 (GMP) FDA §21 CFR 177.2470 We use High Quality Parts Uses High Quality parts on the new range of DMUK EXSH 1 by Adding Certified Reducers, Stainless Steel Parts and Bestspoke Control Parts. Machine Design and Construction. Having Expirienced Engineers and Designers Working on a Full Range of Work Shop Machinery, CNC, Plasma Cutters, Moulding Machines we Provide High End Quality and Competitive Lead Times. E2Pr7Jm

Condition: new, Year of construction: 2024, Functionality: fully functional, 5-axis travelling column machining centre - SAMAG SFZ3500- with swivel head and internal rotary table (Ø:1000mm, interference Ø:1300mm) X:3500mm Y:1000mm Z:1000mm Spindle: SK50 max. 12,000rpm 54kW Tool changer: 60 Control: Heidenhain TNC7 Coolant system with paper belt filter Internal coolant supply: 40bar (max. 80bar) Boe223Jvzza Internal air supply through the spindle 3D touch probes Collision monitoring (DCM) Kinematics Opt The machine is available at short notice and can be inspected and tested at the factory.

Condition: ready for operation (used), Year of construction: 2018, Machine speed: 450 staples per minute. Dqz3T7 Staple spacing: adjustable 30-70 mm. Machine length and width: 4500x2100mm Machine weight: 2T Year of production: 2018 Net price.

Condition: new, Year of construction: 2025, Functionality: fully functional, INDUSTRIAL POWDER COATING FURNACE (WITH PALLET TYPE CONVEYOR) - Length:600cm Width:200cm Height:300cm (Net Usage Area is 260/270cm) - Fuel Gas - Burner: Ureth Brand / URG Series - Thermoblock All 2mm 304 Quality Stainless Steel - Body All 1/1.2mm Galvanized (DKP - Black Sheet Not Used) - Circulation Fan Motor (2 pcs) - Conveyor (Pallet Type) - Electric Panel: Control Unit (Programmable.) - Insulation: Brand Knauf German Made Rock Wool (15cm) Dw8Bom8Jd INDUSTRIAL POWDER COATING BOOTH (6 FILTERS) - Length:400cm Width:120cm Height:250cm (Net Usage Area) - 6 Filters Included. - Works with Solenoid Valve System. - LED Illuminated. - Top Manual Rail System. - Electric Panel: Control Unit ELECTROSTATIC POWDER COATING MACHINE (2X) - Manual System - Powder Coating Tank Included.

Condition: new, power: 110 kW (149.56 HP), Year of construction: 2025, Bauxite Crusher: Bauxite is an aluminum ore, and crushers or mills are used to break down the bauxite into smaller pieces for further processing. Jaw crushers, impact crushers, or cone crushers may be used for this purpose. Granite Crusher: Bqzdzcxgwm Granite is a hard and durable natural stone. Crushers used for granite crushing typically include jaw crushers, impact crushers, and cone crushers. These crushers can handle the varying hardness of granite and produce different sizes of crushed products. Bentonite Crusher: Bentonite is a type of clay with excellent water-absorbing and plasticity properties. Crushers such as jaw crushers or cone crushers are used to break down the bentonite into a manageable size for further processing. Barite Crusher: Barite, also known as baryte, is a mineral consisting of barium sulfate. Crushers like jaw crushers and cone crushers are commonly used in the crushing process of barite. Impact crushers may also be used for shaping and processing finer particles. For each of these minerals, the selection of the appropriate crusher depends on factors such as the hardness of the material, the required final product size, and the specific characteristics of the deposit. It's also important to consider whether a primary crusher, secondary crusher, or even tertiary crusher is needed in the processing flow. Additionally, for certain applications, grinding mills may be employed after the initial crushing stage to further reduce the size of the particles. Grinding mills suitable for these minerals might include ball mills, Raymond mills, or vertical roller mills, depending on the specific requirements of the process. Remember that the choice of crushers and mills is often part of a larger mineral processing plant design, and the selection process should take into account the overall production requirements, mineral characteristics, and economic considerations.

Condition: excellent (used), Year of construction: 2024, operating hours: 12 h, Functionality: fully functional, type of input current: AC, total length: 762 mm, total height: 609 mm, total width: 153 mm, Vertical pouch sealing machine, it's small machine can be used for packing food,masala and Pickle and anything in as packets . Can be used for home business and small scale businesses.7 Drefal

Condition: used, Year of construction: 2004, Make : Regal Model : 9000 YoM: 2004 Utttjpvrnf Refurbished in 2018 Current Cup Dimensions: 71 mm ( This can be changed on request) Speed : 2400 Cups per Hour Stations : Cup Dispenser- Filler - Aluminium Lid - Sealing - Outfeed conveyor Controls : Very Good condition Available : Immediately after service Location : Dairy Machinery UK

Condition: good (used), Rigid Box Corner Pasting Machine GC-40 A brand new device. Drcurn The machine glues cardboard corners with paper tape or foil. Technical data: Tape length 5-35mm Hoof depth 10-300mm Tape width 19mm Efficiency 20-40 cycles/min Weight 230kg Power supply 230V

Condition: used, Year of construction: 1991, Functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 610 mm, nominal power (apparent): 7,500 kVA, table width: 450 mm, table length: 1,830 mm, rotational speed (max.): 1,800 rpm, Sajo BF 400 DM Milling Machine X 1200 MM Y 700 MM Z 600 MM TWO SPINDLES Bz3Kth2Bvi TILTING SPINDLE HEAD 1 800 RPM

Condition: new, Year of construction: 2025, Functionality: fully functional, laser power: 1,500 W, working range: 6,000 mm, warranty duration: 24 months, input frequency: 50 Hz, repeat accuracy: 0.03 mm, positioning speed: 80 m/min, Equipment: cooling unit, safety light barrier, G SERIES HIGH SPEED PROFESSIONAL TUBE LASER CUTTING MACHINE 1500-3000W The G series is equipped with many high-quality components with extreme performance and powerful cutting functions,suitable for tube cutting of various types and diameters ● The Highest Standards of Chucks in the Industry ● Two Methods for Fewer-tailing Cutting ● Variable Diameter Wheel Supporting ● Automatic Unloading Device ● Super Dust Removal System ● Patented Dust Baffle ● High-strength Cage Structure Welded Machine Bed Technical Parameter: Model:G-12 Power: 1500W-3000W Maximum Tube Processing Size: 6000mm*φ120mm Cpl0Ju2Whe Max. Rotating Speed of Chucks: 160r/min X/Y-axis Positioning Accuracy≤0.05mm X/Y-axis Repositioning Accuracy≤±0.03mm Maximum positioning speed: 80m/min Max. Acceleration: 1.5G Round Tube Processing Dim: Φ10mm-Φ120mm Square Tube Processing Dim: 10mm*120mm Overall Dimensions: 9000mm*2700mm The Highest Standards of Chucks in the Industry The highest standards of chucks in the industry with strong clamping force, high rigidity, high speed, and stable performance Two Methods for Fewer-tailing Cutting Support two fewer-tailing cutting methods , choose one of them on the software interface according to different tube diameters Chuck double jaws: standard double jaws, small tube cutting precision is guaranteed Support: 2 sets of variable diameter wheel support standard (optional to increase to 3 sets)/optional servo support Unloading: [3M/4M] cylinder unloading rack/optional-[3M/4M] servo unloading rack/optional Loading: [Fully automatic loading rack/simple fully automatic loading rack/semi-automatic loading rack]/optional Dust removal: standard rear card hollow dust removal Short tail: chuck fixed, crossbeam fixed, short tail, front card open, rear card Continue to move forward, shorten the tail, ≥80 mm; if the short tail function is not used, the tail is about 200 mm Variable Diameter Wheel Supporting G Series has a wide range of cutting for various types and diameters of tubes, supported by the variable diameter wheel Automatic Unloading Device Efficient automatic unloading, saving time and labor costs, greatly improving production efficiency Super Dust Removal System The super dust removal system with ventilation design inside the chuck and the tube reduces the slag hanging in the tube, which is independently researched and developed by Glorystar Patented Dust Baffle Patented dust baffle protects important components from pollution and ensures stable performance High-strength Cage Structure Welded Machine Bed The industry’s highest-quality high strength cage structure welded machine bed with long life, anti-vibration, anti-torsion and anti-deformation

Condition: new, Year of construction: 2024, Gravel and aggregate production equipment is used to crush, screen, and process stones, rocks, and other materials for the construction industry. This equipment is essential in producing various types of aggregates, including crushed stone, gravel, sand, and recycled concrete, which are used in the construction of roads, buildings, bridges, and other infrastructure projects. Here are some common types of equipment used in gravel and aggregate production: 1. Jaw Crusher: Dj2Wmgbnx - Jaw crushers are primary crushers used to break down large rocks into smaller, more manageable pieces. They are essential for the initial stage of aggregate production. 2. Impact Crusher: - Impact crushers are used to crush rocks and stones with the help of impact force. They are suitable for shaping and producing fine aggregates. 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They produce well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They are suitable for processing materials with high abrasiveness. 5. Screens: - Vibrating screens are used to separate different sizes of aggregates. They classify the material based on particle size and ensure that the final products meet specified gradation requirements. 6. Scalping Screens: - Scalping screens are used to remove oversized materials before they reach the primary crusher. This helps to optimize the crushing process and prevent damage to the equipment. 7. Washing Equipment: - Washing equipment, such as sand screws or log washers, is used to remove impurities and fine particles from aggregates. This is particularly important for producing high-quality concrete sand. 8. Conveyors: - Conveyors are used to transport materials between different stages of the crushing and screening process. They play a crucial role in enhancing efficiency in material handling. 9. Stackers and Reclaimers: - Stackers are used to create stockpiles of processed aggregates, while reclaimers are used to retrieve the material from the stockpile. Both are essential for efficient material storage and handling. 10. Crushing Plants: - Complete crushing plants include various types of crushers, screens, and conveyors integrated into a single system. These plants are designed to handle large volumes of material efficiently.

Condition: excellent (used), Two-sided hydropneumatic metal industry punching, plate punching, punching machine Hole diameter: 5mm Vwxwzvj Plate thickness: 2mm Roller track / table size: 780 x 1400 x 900mm Control with foot switch.

Condition: new, Year of construction: 2025, Functionality: fully functional, type of input current: AC, throat depth: 3,000 mm, nominal power at 50% duty cycle: 150 kVA, continuous power (apparent): 105 kVA, input voltage: 380 V, type of cooling: water, warranty duration: 24 months, Wire mesh, Wire Shelf Spot Welding Machine plus CNC Programming, grating welding machine racking system,shelf,wire shelf,supermarket shelf,welding of grill,how to make welding of shelf,tel raf punta kaynak makinası,market tel raf kaynak makinası,süpermarket sepeti kaynak makinası,supermarket shelf welding machine How to weld shelf / Multiple Wire Spot Welding Machine / süpermarket raf kaynak makinası Gxcciam Wire mesh,Wire Shelf Spot Welding Machine plus CNC Programming,wire welders,wire welding equipment,Kitchen Wire Tray,Wire Shelf,Continuous welding Kitchen Wire Tray / Wire Shelf,grating welding machine,grating,grating welding

Condition: good (used), OMRON CPM1A control, 4 stations. Gc9Xq2Pzc Target machine for assembling and compressing door glass modules. Price is a net target price, a matter of final price agreement Purchase, acquisition, asset management of industrial equipment and machinery. Wide range of used machinery, industrial equipment