Used Swing Chisel for sale (2,883)

Condition: used, Year of construction: 2008, We are selling one fully functional Schmidt Sweeper Swingo 200 from year of manufacture 2008. Equipped with a VM engine 560/9 delivering 62 kW, dual broom system, Motec reversing camera, passenger seat, directional switch for forward/neutral/reverse, 2 m³ debris container capacity, new TÜV (vehicle inspection), new service, new brushes, and 215R14C Kumho tires. The machine received a new engine approximately 2 years ago. Operating hours: around 800. The machine is ready for immediate use. Further details available upon request. Location: 94491 Hengersberg. Nwedpfx Ahoyq Au Devod

Condition: good (used), Year of construction: 2014, first registration: 06/2014, fuel type: diesel, color: red, fuel: diesel, Swingo 200 + - 4 wheel steering - Dutch Registration Year of manufacture: 30-6-2014 WSVS462S2E1730012 TZR-38-N Nwjdpsxcnynofx Ahvjd = Further information = Intended use: Internal logistics Permissible total weight: 4,500 kg Technical condition: good Visual condition: good Registration number: TZR-38-N Contact VAEX The Truck Traders for more information.

Condition: used, Year of construction: 2025, Rhinoceros, the top-quality mini-excavator for a fair price. With a one-year parts warranty! Spare parts in stock. We arrange transport throughout Germany and beyond. Rhinoceros KS10-8 mini excavator with kinkmatic New in 2025 With a 12 hp single-cylinder diesel engine. Total weight 1000 kg. Front joystick controls. Nodpjxb Rf Rofx Ahvjwd Roof and roll bar. Work lights. Net 5500 / gross 6655 Additional bins 500 / gross 605

Condition: reconditioned (used), Mortising machine, swing chisel mortising machine MAKA type DB 5 with many mortising tools, see pictures Workpiece stop 2 pieces Stop rail right / left 2150 mm Workpiece blow-out 2x Foot switch Pneumatic workpiece clamping on the side 1 piece Pneumatic workpiece clamping from above 2 pieces Extraction connection D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. Nsdpfx Aov Hm Nmohvswd • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 310435, Completely overhauled - new painting New workbench - new geometry Manufacturing origin Swiss Voltage 380V 50Hz 3Ph Customs position 8458.1930 TECHNICAL DATA Capacities : - height of centres 102 mm - distance between centre, standard headstock type W 470 mm - distance between centres, headstock type W with reduction unit 375 mm - swing over bed 200 mm - swing over carriage 120 mm Bed : - height-width-length 168-100-1000 mm cast-iron bed with ground inverted-V profile Headstocks : - spindle nose for collets W-25 - maximum bore through collet 19.0 mm - headstock with reduction unit, ratio 1:5 Carriages : - stroke of longitudinal tool slide 90 mm - stroke of transverse tool slide 100 mm - size of tools 12x12 mm Tailstocks : - internal taper of tailstock spindle Morse 2 - spindle stroke, screw- and handwheel-operated 80 mm errors and omission excepted-data given without obligation Nedpodr R Tcofx Ahvowd Inventory no. 2250023, machine comprising: 1 NEW workbench 2000x800 mm with blue Urphen worktop 2000x800x50 mm 1 leg, 1 B750 cabinet with 7 drawers 1xD50/2xD75/2xD100/1xD150/1x200 1 bench for overhead control 1 W-25 workpiece holder without gear reducer with clamping key, serviced 1 serviced cross slide 1 reconditioned aligned tailstock 1 380V/50Hz/3ph motor. 2 speeds 1 used W-25 solid centre 1 set of used W25 collets 1 used Reishauer ZMG 2x3 jaw chuck Ø 110 mm on w-25 flange 1 new set of used Multifix tool holders including -1 type A turret with AG20 stud -2 AD1675 chisel holders -2 AD2090 chisel holders 1 Albrecht self-tightening drill chuck, cap 1-13 mm on CM2 tenon, used 1 used CM2 solid centre point OPTION 1 used tensioner with new belt CHF 1000 + VAT 1 AS TYPE B-8 GRINDING MACHINE with 360° swivel quill max. speed 28,000 rpm, adjustable height, adjustment, ref. 800053 CHF 1,325 + VAT

Condition: used, Year of construction: 1977, faceplate diameter 2500 mm swing diameter 2700 mm turning height 2000 mm cross rail - adjustment 1500 mm workpiece weight max. 20.000 kg total power requirement 71 kW Control Siemens Sinumerik 840 Single-column vertical lathe 2000 x 2000mm Retrofit: 1997 Nwodpfx Asuddpgohvod Gr. turning diameter: 2700mm Gr. distance f. face plate to bottom of toolholder: 2150mm chisel holder: 2150mm Support swivelling up to 30° Chisel cross-section: 240x240mm small plunging diameter: 300mm Special equipment: Re-moulding, taper turning, thread cutting, constant cutting speed

Condition: new, Machine according to DIN 8605: lathe with increased accuracy. Tip width: 700 mm Peak height: 170 mm Circulating diameter over bed: 340 mm Circulating diameter over flat slide: 190 mm Bed width: 260 mm Laengs schlitten: 600 mm Shifting path cross slide: 220 mm Shifting path upper slide: 110 mm Flat slide: 410 mm Flat slide width: 150 mm Guide load-length bed slide: 380 mm Rotary chisel cross-section: 20x20 mm Center of rotation distance - Upper slide: 34 mm Swing range upper slide (Support): 60/120° Main spindle: Spindle connection DIN 55029 (Camlock): S 5 Spindle bore: 50 mm Inner cone according to DIN 7178: 1:22 Spindle diameter in the front bearing: dia. 70 mm Max chuck diameter: 200 mm Max. washer diameter: 200 mm Spindle speeds: 40-3000 rpm Speed control: Stepless mechanical speed levels: 4 Main drive: Power at 40% ED: 5.3 kW Max rated torque a. d.Main spindle: 640 Nm Feed: 20 (28) Laengsvorschuebe Z: 0.045-0.787 mm/U 20 (28) Plan vorschuebe X: 0.023-0.406 mm/U Thread: 20 (28) metric thread (basic): 0.4 - 7.0 mm Nedpfxodctnbj Ahvewd 32 inch thread (with option Raed replacement D3Z200): 56 - 4 Gg/inch 28 Module thread (with option Raed replacement D3Z200): 0.2 - 3.5 32 diam. Pitch thread (with option Raed replacement D3Z200): 112 - 8 Tailstock: Pinole diameter: 50 mm Indoor cone of the pinole: MK 3 Pinole stroke: 120 mm Side adjustment: x 13 mm Zulessige Werkstueckweights

Condition: good (used), Colchester / Harrison / 600 Lathes TORNADO 300 CNC lathe TECHNICAL DATA Spindle power: 18 / 22 kW Spindle connection: A2-8 Spindle bore: 90.5 mm Chuck sizes (A type): 265 mm Drawtube diameter: 82 mm Front bearing (inner diameter): 130 mm Max. Spindle speed: 4000 rpm X-axis: 240 mm Travel over center of rotation: 213 mm Under turning center: 27 mm Working stroke Z-axis: 500 mm Feed speeds: Rapid traverse X-axis: 10 m/min Rapid traverse Z-axis: 20 m/min Min. feed step: 0.001 mm Tool carrier: Njdsrnkhyjpfx Ahvewd Turret, number of tools: 12 Tool holder mounting: VDI 3425 / 40 Turning chisel, shank size: 25 x 25 mm Max. Drill rod diameter: 40 mm Tailstock quill diameter: 95 mm Quill inner cone: No. 5 MK Quill stroke: 125 mm Tailstock travel: 485 mm Max. Tailstock quill axial force: 7860 N Swing diameter: 530 mm Turning diameter over cross slide: 330 mm Max. Machining diameter: 300 mm Max. Turning length: 500 mm Height of turning center above floor: 913 mm Bed width Z-direction: 750 mm Bed width X-direction: 393 mm Bed width tailstock guide: 255 mm Cross slide width: 256 mm Bed slide inclination: 600 mm Installation area: 3.26 m2 Weight: 3300 kg We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: ready for operation (used), functionality: fully functional, turning diameter: 1,700 mm, center height: 630 mm, center width: 4,000 mm, spindle speed (max.): 400 rpm, empty load weight: 4,000 kg, TECHNICAL DETAILS Centre height: 630 mm Swing diameter over bed: 1,300 mm Swing diameter over carriage: 1,000 mm Swing diameter over removable bed section: 1,700 mm Centre distance: 4,000 mm Bed width: 700 mm Spindle bore: 120 mm Spindle speed: 2.8 - 400 rpm MACHINE DETAILS Control: Conventional Dimensions & Weight Dimensions (L x W x H): 6,800 x 2,200 x 2,000 mm Unladen weight: 11,000 kg Transport packages: 2 EQUIPMENT Documentation Nwodpfxeyua Ivo Ahvsd Three-jaw chuck Four-jaw chuck Removable bed section Quick-change tool holder Fixed steady rest Travelling steady rest

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 863 mm, turning diameter: 432 mm, rotational speed (max.): 3,400 rpm, swing diameter over bed slide: 762 mm, controller model: Haas CNC Control, TECHNICAL DETAILS Turning diameter: 432 mm Turning length: 863 mm Spindle speed: 3,400 rpm Spindle bore: 88 mm Tool turret: 12 stations Tool holder: VDI 40 Swing diameter over bed: 762 mm Swing diameter over cross slide: 432 mm Three-jaw chuck diameter: 254 mm Tailstock quill ISO: 290 Bar capacity: 76 mm Nodpoywhfvefx Ahvewd Travel Z-axis: 864 mm Travel X-axis: 287 mm MACHINE DETAILS Control: Haas CNC Control Spindle motor power: 22 kW Dimensions & Weight Required space: 3.9 x 2.0 x 1.9 m Machine weight: 7.25 t EQUIPMENT Technical documentation

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, rotational speed (max.): 2,500 rpm, swing diameter over bed slide: 470 mm, center width: 1,000 mm, TECHNICAL DETAILS Distance between centres: 1,000 mm Swing diameter over bed: 470 mm Spindle speed ranges 1: 50–270 rpm 2: 150–850 rpm 3: 450–2,500 rpm MACHINE DETAILS Nedpfx Ajywg Rdehvjwd Electrical supply Mains voltage: 415 V Phases: 3 Frequency: 50 Hz Control voltage: 24 V Main motor power: 7.5 kW Main motor current draw: 13 A Auxiliary motor power: 0.173 kW Auxiliary motor current draw: 1.55 A Total motor power: 7.673 kW Total current draw: 14.55 A

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, turning length: 1,300 mm, turning diameter: 1,000 mm, controller model: Siemens Sinumerik 840 D, faceplate diameter: 1,250 mm, Equipment: chip conveyor, TECHNICAL DETAILS Turning diameter: 1,000 mm Swing diameter: 1,250 mm Njdpfsywgrbjx Ahvewd Turning length: 1,300 mm Swing diameter over bed: 1,250 mm Swing diameter over cross slide: 1,000 mm Maximum swing diameter in the gap: 1,250 mm Spindle diameter at front bearing: 500 mm Faceplate diameter: 1,250 mm Chuck diameter: 1,250 mm Maximum torque: 1,200 Nm Spindle speeds: - Speed range 1: 3.15 - 45 - 112 rpm - Speed range 2: 12.5 - 180 - 450 rpm Driven tools speed range: 50 - 1,000 - 2,000 rpm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Total connected load: 80 kW Machine weight: approx. 20 t EQUIPMENT Driven tools Various clamping jaws Tool measuring probe Chip conveyor Filtration system Technical documentation

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D spindle head A 11 tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm c-axis 0,1-30 1/min diameter of quill 160 mm Njdpfxjwwarue Ahvswd taper bore MK 5 tool length - max. 500 mm weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm)

Condition: ready for operation (used), Year of construction: 2021, operating hours: 735 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 800 mm, spindle motor power: 22,000 W, total height: 2,100 mm, total width: 1,900 mm, overall weight: 5,900 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, product length (max.): 4,400 mm, workpiece diameter (max.): 400 mm, number of slots in tool magazine: 12, number of axes: 4, This 4-axis DMG MORI CLX 450 V4 was manufactured in 2021. It features a maximum turning diameter of 400 mm and a turning length of 800 mm. The machine is equipped with a Siemens Sinumerik 840D control and includes a turret with 12 stations, all with driven tools and a Y-axis. If you are looking for high-quality turning capabilities, consider the DMG MORI CLX 450 V4 CNC turning center we have for sale. Contact us for further details. • Working range: • Max. turning diameter: 400 mm • Max. turning length: 800 mm • Swing over cross slide: 320 mm • Axes: • X, Z, Y, C • C axis: full interpolation Nodeyxrlispfx Ahvowd • Main spindle: • Spindle nose: A8 • Turret and tools: • 12 stations • All stations with driven tools • Performance: • Rapid traverse (X/Y/Z): approx. 24 / 10 / 30 m/min • Machine size: • Power supply: 400 V / 50 Hz • Condition and notes: • Checked before disconnection; very good condition • All functions working properly (turret, driven tools, handwheel, coolant system) • No mechanical damage found in bearings, ball screws, linear guides, or drive belts • Geometry within manufacturer’s tolerance: • Turret parallelism to Z-axis: 0.018 mm • Alignment: 0.015 mm / 0.011 mm • Spindle correctly aligned (no tilt) • No signs of collisions on turret, chuck, or tailstock • Machine complete with all equipment and options Additional equipment • Tailstock • Chuck • Measuring probe • Chip conveyor Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2017, total length: 3,200 mm, total width: 900 mm, total height: 1,800 mm, Empty weight: 2.000 kg Price: On request - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 170031 - Drive system: Conventional - Power [kW]: 5.5 - Centre height [mm]: 250 - Swing over bed [mm]: 500 - Distance between centres [mm]: 1500 - Spindle bore [mm]: 58 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 2300 - Options: Quick-change tool post, Three-jaw chuck, Removable bed, Digital readout - Swing over removable bed [mm]: 700 - Type of digital readout: Fagor - Transport dimensions: 3200mm x 900mm x 1800mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information Nwjdpfjyxrc Iox Ahvsd VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side walls swinging and foldable, side drop sides with spring assistance, platform floor made of 4 mm fine-grain steel, 8 strong lashing eyes recessed into the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear and 45 degrees to the sides, continuously height-adjustable draw tube, removable rear stakes, gearbox support winch with load and high-speed mode at front, integrated receiver compartment for two aluminum loading ramps in chassis, lockable ramp compartment (privacy protection), contour marking according to ECE R 048 regulation, vehicle with day registration, -- Subject to misprints, errors and changes, sample images --, More data at: !, More details: ! Nwsdjyxq Hrepfx Ahvsd

Condition: excellent (used), Year of construction: 2008, operating hours: 9,626 h, functionality: fully functional, spindle bore: 55 mm, turning diameter: 410 mm, turning diameter over bed slide: 246 mm, turning length: 1,250 mm, Colchester MultiTurn 2000 CNC Lathe Model: MultiTurn 2000 Control: FANUC Oi-TC Year: 2008 Swing over Bed: 410mm Swing in Gap: 600mm Swing over cross slide: 246mm Distance Between Centres: 1250mm Spindle Speeds: 15 – 2700 RPM Spindle Bore: 55mm dia. Motor: 7.5 kw Machine with: 250mm 3-jaw chuck 8 station auto indexing turret Nodpfjyxq Dqjx Ahvowd VDI30 Tool Holders Auto Lubrication Sliding Guards Coolant Work Light Dimensions: 2900 x 1700 x 1500mm high Weight: 2200 kgs

Condition: excellent (used), Year of construction: 2002, operating hours: 4,844 h, functionality: fully functional, turning diameter over cross slide: 449 mm, turning length: 1,330 mm, turning diameter: 393 mm, spindle bore: 90 mm, spindle speed (max.): 3,500 rpm, Daewoo Puma 300LB CNC Lathe Model: Puma 300 LB Year: 2002 Control: FANUC 18i-T Swing over Bed: 580mm Swing over Carriage: 449mm Max. Turning Dia.: 393mm Tuning Length: 1330mm Nwjdpfx Ajyxq A Tjhvod Spindle Bore: 90mm dia. Spindle Speeds: 3500 RPM Machine With: 300mm Power Chuck Manual Fixed Steady Tool Holders Manuals

Condition: used, Year of construction: 2011, total length: 5,000 mm, total width: 2,100 mm, total height: 1,650 mm, Weight: 7.800 kg - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 02969-099B81 - Drive system: CNC - Control system brand: Cybelec - Control system type: - Drive type: Hydraulic - Configuration: Swing-beam - Power [kW]: 11.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 4100 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: Pneumatic - Finger guard: Fixed with lift-up guard - Angle adjustment: Motorized - Blade gap adjustment: Manual - Table type: Fixed table - Transport dimensions: 5000mm x 2100mm x 1650mm (l x w x h) - Transport weight [kg]: 7800kg - Transport packages [pcs.]: 1 Nodpfx Ajyxqrujhvewd Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: refurbished (used), Year of construction: 2022, turning diameter over bed: 540 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Nwedpfxsyxqk Do Ahvjd Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: used, Year of construction: 2006, functionality: fully functional, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Nwsdpfsyxp Syjx Ahved Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600 4 driven axial tool holders 2 driven radial tool holders

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Time recording from Feb. 2025 Operating hours = 16085 h Main spindle = 616 h Milling spindle = 369 h CNC control Siemens Sinumerik Si 840D sl Max. center distance 4500 mm Working height 1375 mm X-axis travel -15 +725 mm Y-axis travel -245 + 4756 mm Swing diameter over cross slide 780 mm Swing diameter over bed 820 mm C-axis, smallest increment +/-0.001° Main spindle A15 with BVG; 3135 N;/2000 rpm Spindle head DIN 55026 Form A 15 Max. speed 3000 rpm Nedpfx Ahjyxp H Dsvswd Max. torque 3135 Nm Drilling/milling unit Milling power (40/100% duty cycle) 36.5/29.8 kW Torque up to 1110 rpm (40/100% duty cycle) 328/261 Nm Max. spindle speed 5000 rpm Swivel range (B-axis) -105 +95° Vertical travel (Y-axis) -250 +250 mm SR5 steady rest with eccentric fine adjustment 45–310 mm C8 tool system Tool magazine (2 magazines) 144 Tailstock Quad diameter MK6 180 mm Quad stroke 170 mm Quad force (adjustable) 5–28 kN Quad fine adjustment +/- 0.15 mm Optional equipment Coolant tank capacity 990 l Workpiece measurement MC (Reinshaw) Software Gear hobbing &more

Condition: used, Year of construction: 2017, Technical details: turning diameter: 356 mm turning length: 705 mm control: CELOS M730 UM MAPPS swing dia.: 742 mm standard turning diameter: 275 mm travel -x axis: 260 mm travel -y axis: 100 ( ±50) mm travel -z axis: 795 mm rapid travel - longitudinal/face: 30 / 30 m/min Rapid travel B-axis (parts transfer subspindle): 734 m/min Spindle 1 RPM: 4000 1/min Spindle 1 Power: 15/18,5/18,5 kW Spindle 1 Torque: 409/505 /599 Nm Spindle 1 max. bar diameter: 80 mm Spindle 2 RPM: 4500 1/min Spindle 2 power: 7,5/11 kW turret stations / rotary tool stations: 20 / 20 BMT40 Nwodpfx Aoyxpv Sjhvsd speed of driven tools: 10000 1/min : 3.7/5,5/5,5 kW torque rotary tools: 14 / 24 Nm total power requirement: 38 kVA weight of the machine ca.: 6,3 t dimensions of the machine ca.: 4 (9) x 2,1 x 2,2 m Accerories Chip conveyor Barfeeder Interface Parts catcher Sp. 1 und Sp. 2 Parts and total counter Signal lamp 3 colors Spindle 1 Chuck Kitagawa B 210 (250 mm) Spindle 2 Chuck Kitagawa B 206 (160 mm) Conveyor for partsdisposal Automatic door Interface for coolant through the spindle Coolant through spindle 70 bar Knoll Program restart Tool presetter Spindle 1 & 2 Coolant shower 1m Barfeeder magazine IRCO High precision Turning and Milling Centre with Y-axis and sub spindle. Easy programming by CELOS-MAPPS 4 Control. Very low cutting hours. Machine is like new. All existing toolholders and life tool holders come with the machine. *

Condition: good (used), Year of construction: 2012, General information Field of application: Construction Weights Empty weight: 1.620 kg Functional Lift height: 1.300 cm Working height: 1.500 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 980 m Max swing of platform in degrees: 360 Transport dimensions (LxWxH): 6,47x1,81x2,11 Nedpfxsxgnnme Ahvewd Additional information Please contact Christian Theißen for more information Manufacturer: Dino Lift Model: 150T Year of build: 2012 Condition: Used Data: Max. working height: 14,95 m Platform height: 12,95 m Max. reach: 9,80 m Platform lifting capacity: 215 kg Platform dimensions LxW: 1,30 x 0,70 m Swivel range: 360° / endless Total dimensions LxWxH: 6,47 x 1,81 x 2,11 m Wheel pressure (Support pressure): 13 kN Ground clearance: 0,24 m Support width both sides: 4,46 m Support length: 3,85 m Ground pressure: 100 kg Drive type: 230 V Einspeisung Own weight: 1.620 kg Special features: rotatable working basket, maneuvering drive, 4 supports. Location: 41468 Neuss immediately available

Condition: good (used), Year of construction: 2012, General information Field of application: Construction Drivetrain Type of fuel: Electric Weights Empty weight: 2.465 kg Nwsdjyxpdijpfx Ahved Functional Lifting capacity: 215 kg Lift height: 1.870 cm Working height: 2.070 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 1100 m Max swing of platform in degrees: 360 Transport dimensions (LxWxH): 7,9x1,89x2,25 Production country: DE Additional information Please contact Christian Theißen for more information Manufacturer: Dino Lift Model: 210XT Year of build: 2012 Condition: Used Data: Max. working height: 20,70 m Platform height: 18,70 m Max. reach: 11,00 m Platform lifting capacity: 215 kg Platform dimensions LxW: 1,40 x 1,00 m Swivel range: 360° / endless Total dimensions LxWxH: 7,90 x 1,89 x 2,25 m Transport dimensions LxWxH: 7,90 x 1,89 x 2,25 m Support width both sides: 4,33 m Support length: 3,94 m Ground pressure: 18 kN Ground clearance: 0,20 m Drive type: Battery 230 V / Diesel Empty weight: 2.465 kg Special features: Support load 75 kg, rotatable work basket 180°, socket in the work basket, maneuvering drive, operation optionally via diesel engine or 230 V mains connection. The device is operated in electric mode via power cable.