Used Swing Drives for sale (22,532)

Condition: used, power capacity 15 kW volt 380 V ampere 28 A weight of the machine ca. 84 kg Itedovttctepfx Affor

Condition: used, Synchronous servomotor with holding brake and gearbox, geared motor, electric motor, angular geared motor Motor: Manufacturer: LUST LTI DRIVES Type: LSK-190-7-30-560 T1,P,KK,1R Order No.: 716090 Art. No.: 0970.8016 Machine type: Permanently excited synchronous servo motor DC link voltage of the controller Uzk: 560 VDC Rated power: 14.51 kw Rated speed: 3000 rpm Rated torque Mn: 46.2 Nm Standstill torque M0: 83.4 Nm Rated current In: 31.5 A Standstill current I0 / I0max: 54.9 / 219.6 A Pole pairs: 3 Shaft diameter: 32 mm Shaft length 50 mm - Shaft journal with key and keyway DIN 6885 / A10x8x50 - Option 1R Resolver 1-pole pair - Option KK Terminal box - Option T1 (DIN-PTC double base insulated) - Power connection 8-pin junction box - Resolver connection 12-pin junction box Holding brake: Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order no.: 718690 Art. No: Rated voltage: 24 VDC Rated current: 4.5 A Rated power: 108 W Iodpfx Aof Dlzujffetr Braking torque: 65 Nm Angular gearbox WESTFALIA Systemtechnik Hollow shaft output: internal Ø 65 mm Hollow shaft length: approx. 280 mm Gearbox output speed: max 450 rpm Speed gearbox input: max 4500 rpm. Transmission ratio: 10:1 - Shaft journals also ground on the outside - Gearbox can be mounted on two flange surfaces - Mounting hole on gearbox 180 x 180 mm / 180 x 230 mm Overall dimensions L x W x H: 1110 x 250 x 350 mm Total weight: 180 kg good condition

Condition: excellent (used), Year of construction: 2014, Gearboxes, spur gears, bevel gears, transmission gears, crane gears, hoist gears, grab lifting and closing gears -Manufacturer: PIV Drives, gearbox type D-315-22H -Translation: 34.726 :1 -Motor: without electric motor (can be supplied at extra cost) -Input- shaft: Ø 60 x 140 mm -Output hollow shaft: Ø 160 x 500 mm -Dimensions: 720/1300/H725 mm -Weight: 1321 kg Itedpjvxq Nuefx Affor

Condition: used, Synchronous servo motor with holding brake and gear, Geared motor, electric motor, angular gear motor Engine: Manufacturer: LUST LTI DRIVES Type: LSK-190-4-30-560 T1,P,KK,1R Order no.: 716090 Art. No.: 0970.8015 Machine type: Permanently excited synchronous servo motor DC link voltage of the controller Uzk: 560 VDC Nominal power: 12,13 kw Nominal speed: 3000 rpm Nominal torque Mn: 38,6 Nm Standstill torque M0: 61.5 Nm Rated current In: 26.6 A Standstill current I0 / I0max: 41 / 164 A Pole pairs: 3 shaft diameter: 32 mm Wavelength 50 mm - Shaft journal with keyway and keyway DIN 6885 / A10x8x50 Itsdpfxof Dlzqo Affjr - Option 1R Resolver 1 pole pair - Option KK Terminal box - Option T1 (DIN-PTC double basic insulation) - Power connection 8-pole junction box - Resolver connection 12-pole junction box Holding brake: Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order no.: 717173 Art. No.: 228-00043 Nominal voltage: 24 VDC Rated current: 4.5 A Nominal power: 108 W Braking torque: 160 Nm Angular gearboxes WESTFALIA Systemtechnik Shaft journal output: Ø 60 mm with feather key Shaft journal Length: approx. 120 mm Gearbox output speed: max 450 rpm. Gearbox input speed: max 4500 rpm. Transmission ratio: 10:1 - Gearbox can be mounted on two flange surfaces - Mounting hole on gear unit 180 x 180 mm / 180 x 230 mm - Transmission with 3-fold sprocket outer diameter: 147 mm, number of teeth: 17 Overall dimensions L x W x H: 1020 x 250 x 350 mm total weight: 175 kg sound condition 2 pieces available, price per piece [...]

Condition: new, Saw unit swivels 46 ° on both sides. Programmable, electric saw blade adjustment Control unit with electronic display for saw blade tilt and lift Torsional rigidity and vibration-free working Easier plate feeding due to large trimming frame with roller Telescopic ruler with 2 professional folding stops Excellent cutting precision Itedjd Akygspfx Affor scoring unit equipped with its own motor - easily adjustable from the outside saw blade diameter of 400 mm scoring saw blade with a diameter of 160 mm 2-position saw blade pendulum protection manell adjustable 3-axis controlled Motorized rip fence with electronic positioning includes: Position display via an encoder Adjustment via ball screw Stepless adjustment via switch or automatic positioning system Cutting width 1270 mm Programmed movement of motorized adjustment and tilting for saw unit UP version with swivelling control panel for maximum flexibility X version with Compex miter fence for quick and accurate execution of miter cuts with automatic compensation of the stop position. (Length compensation) incl. options: - cutting lenght 3200 mm - on / off buttons for main motor and scoring unit integrated in saw carriage - CompeX frame - Version "READY 3 UP" - 2 saw speeds (3500/5000 U/min) Max. cutting width with rip fence 1270 mm Format cuts 3200 mm main motor 7,0 kW, 400 V, 50 Hz Saw blade angle -46 - 46 ° Max. cutting height 90° 136 mm Max. cutting height 45° 97 mm Max. cutting height -45° 60 mm saw blade diameter 400 mm Diameter scoring saw blade 160 mm (Main) saw blade speed 4000 min¯¹ Dust extraction ports 120 & 80 mm

Condition: used, Swing Bending Machine RAS Type 64.25 Serial No. 112/10 Year of manufacture: 1987 Working length: 2540 mm Max. sheet thickness: 2.5 mm at 400 N/mm² Upper beam stroke: 210 mm Adjustable bending beam: 30 mm Back gauge: 6 to 1550 mm Compressed air requirement: 5 bar Back gauge motor power: 0.38 kW Upper beam adjustment motor power: 1.1 kW Bending beam motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - One-piece sharp rail 135° - Bending angle and back gauge controlled via RAS control, Type Multibend 2000 - Back gauge (travel 500 mm) - Back gauge with pneumatically actuated fingers at 500 / 1000 mm, fixed stop fingers at 1500 mm - Electric foot switches - Bending beam drive via geared motor and gear drive - Electrical schematic available Itsdpsx Hkfdofx Affsr Space requirement (L x W x H): 3330 x 1850 x 1300 mm Weight: 2000 kg Good condition

Condition: used, Year of construction: 2019, Base frame, carousel and swing arm of a Kuka KR 360 R2830 industrial robot with: - Axis 2 motor: Siemens 1FK7105-5AY81-1YY3-Z Ijdpfx Afox A D Rcjfjtr - Counterbalance GA16

Condition: excellent (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: NOH211/05, Technical data: 1 ABUS VS pillar jib crane, rated load 500 kg Payload at full outreach: 500 kg / 0.5 t Height: approx. 3.45 m Underside of jib: approx. 3.13 m Outreach: approx. 4.6 m Hook height: approx. 2.7 m Total weight: approx. 700 kg Incl. Abus chain hoist 500 kg Slewing range 360°, connection 400V 16A Crane is dismantled and immediately available Iodjx Exfpspfx Affotr Location: 75053 Gondelsheim Other cranes, load capacity 80–5000 kg, available on request See images Shipping by freight forwarder or collection by appointment only

Condition: new, mileage: 10 km, power: 355 kW (482.67 HP), fuel type: diesel, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Equipment: Climate Package * Front chassis configuration: floor plate * XG cab * LED skylights * Reversing camera * Handles and surrounds: black. Sidewall: cab color * LED daytime running lights * Fixed cab entry * Air-sprung cab * Laminated glass with solar protection film * Central locking, 3 keys, 2 remotes * Windscreen with solar protection film * Headlamp washer system * Headlamps with height adjustment * DAF Corner View * LED headlights, cornering lights, and fog lamps * Chassis color: anthracite grey * CRYSTAL WHITE * Cab interior trim: Hexagon Ijdpex Ef H Defx Affstr * Safety net on both bunks * Dashboard design: Plateau * LED interior lighting * Stationary heater with waste heat pump and timer * Interior trim color: Exclusive * Dashboard table * Leather steering wheel * Roof hatch with electric operation * Integrated stationary air conditioning * Driver’s seat: Luxury Air * Preparation for compressed air unit * Passenger seat: cinema & table, fabric upholstery * Driver’s seat with swivel base * Xtra Comfort mattress, adjustable lower bunk * Upper bunk * Automatic cab climate control * Curtains with divider curtain * Fridge and drawer * Armrests on both sides of driver’s seat * Storage compartment with drawer in center console * Accessory power supply: Standard + 2x 40 A * ECAS remote control with extended functions * Adaptive Cruise Control with FCW and AEBS-3 * Driver Performance Assistant * Wireless charging pad * Digital tachograph, VDO 1C, G2V2 version * FMS connector, extended and preinstalled * DAF Infotainment Exclusive, prep. Luxury speakers * Antennas: DAB prep., radio, 2x mobile, GNSS extra: CB * Hill Start Assist * DAF Side and Turn Assist * Electronic Stability Control (VSC) * Speed limit recognition * DAF Drowsiness Detection * Compliant with UN regulations R155 and R156 * Alcohol interlock, preinstalled * Lane change warning system * Reverse warning system * Load limiter 11.5 t * Axle load ratio 11.5/7.5 * Manual lift axle control * Lift axle * Rear: 20.00 t, air suspension, SR1344 * Rear axle capacity 13.00 t * Front air suspension: medium * Front: 8.00 t, air suspension, 161 N * Tire pressure monitoring system * Front axle(s): 315/70 R22.5 * Driven rear axle(s): 315/70 R22.5 * 2nd driven rear/lift axle: 315/70 R22.5 * Steel wheels, silvery grey * Eco-Fuel * Idle shutdown system, 5 minutes * Automated gearbox, TraXon, 12-speed * 12-speed TraXon gearbox 12TX2210 DD, 16.69–1.00 * Emissions standard Euro 6 * Urge-to-move * Rear axle ratio 2.38 * Mechanical differential lock * Traction support 15.0 t * MX-13 engine, 355 kW/483 hp * 2-cylinder compressor without clutch * Driven rear axle with disc brakes * Pneumatic control for parking brake * ZF retarder * Front underrun protection * Spray suppression * Wheelbase 5.05 m / rear overhang 2.90 m * Rear underrun protection * LED rear lights * EAS unit right, horizontal top + 75-l AdBlue tank left * Longitudinal beams 310/7.0 mm, with internal reinf. front/rear * 750-l aluminum fuel tank left * Pneumatic coupling for trailer, turntable * Cross member D137 + Ringfeder coupling D137 * Electrical connections for trailer, 24 V/15-pin * Additional lighting socket, chassis * Side marker lights * Battery energy management * Alternator 150 A, batteries 2 x 210 Ah AGM * Front air intake * Heated fuel pre-filter * Driveline Plus Warranty: 3 years/300,000

Condition: ready for operation (used), Year of construction: 2021, A horizontal flowpack pillow bag machine (flowwrapper) Alpha Pack is available. Packaging capacity: approx. 20-30 packages/min, max. roll width: 600mm, max. product height: 140mm, max. product length: 1000mm, min. product length: 600mm, product width range: 50mm-280mm, max. film diameter: 300mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible. Itedpfx Aox Ectueffor

Condition: new, Year of construction: 2025, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 190 mm, roller (top) diameter: 190 mm, working width: 2,550 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, power: 4 kW (5.44 HP), STANDARD EQUIPMENT This mechanical model is generally manufactured for use in light and medium-duty operations. It is especially used for bending materials up to 10 mm thick. Applications include bending of aluminum sheets, the manufacture of ventilation ducts, advertising panels, machine bodyworks and sheet metal components, and many other similar tasks. All models are equipped with planetary gearbox drive High-strength shafts manufactured from SAE 1050 (CK 45) certified steel Welded steel main frames Manually openable top roll Mobile control panel Conical bending roller Centralized lubrication system Precise bending feature via braked motor and planetary gearbox Powered rear roll with up/down movement Top roll support system In compliance with EU Safety Directives (CE Certificate) User manual OPTIONAL EQUIPMENT Digital display for rear roll Hardened shafts Extended shaft ends for mounting profile and pipe bending rolls Profile and pipe bending roll set Motorized lower roll with up/down movement Derlin ringed top roll for Alucobond bending Adjustable speed steps NC Control TECHNICAL SPECIFICATIONS Bending length: 2550 MM Pre-bending: 4/5 MM Bending: 5/6 MM Top & bottom roll diameter: 190 MM Min. bending diameter: 285 MM Main motor power: 4 kW Rear motor power: 1.5 kW Length: 4700 MM Width: 950 MM Itodpfx Afjx D Dfvofsr Height: 1300 MM Weight: 3400 KG

Condition: like new (used), Year of construction: 2023, functionality: fully functional, volume flow: 400 m³/h, pressure: 16 bar, PSA filter for cleaning hydrogen from steam methan reformer to 99.999%. Further details in attached documents. Capacity 400Nm3 per hour. The PSA has not been used and price is negotiable. Operation pressure between 9.5-15.5 bar. We also have compressor suitable for the PSA. Itsdpoxhcygofx Affjr

Condition: excellent (used), Hydraulic Swing Arm Punch Press Manufacturer: Pedersen Stock no.: 3751 Model: 273 M * Pressing force: 20 tons * Stroke: 150 mm Itjdox A Hwlopfx Affer * Throat depth: mm * Table size: 1020x505 mm * Punch size: 760x530 mm * Motor power: kW * Weight: approx. 650 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: NOH328/04, Technical data: 1 ABUS VS column-mounted slewing jib crane, SWL 500 kg Rated load at full outreach: 500 kg / 0.5 t Height: approx. 3.4+0.9 (column extension) = 4.3 m Underside of jib: approx. 3.9 m Outreach: approx. 6 m Hook height: approx. 3.4 m Total weight: approx. 900 kg Incl. newer Abus chain hoist 500 kg (year 2016) Slewing range 360°, connection 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim Further cranes available, lifting capacity 80–5000 kg, please inquire See pictures Itjdex Exczopfx Affor Shipping by freight forwarder or collection by appointment only

Condition: new, power: 330 kW (448.67 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, STANDARD SPECIFICATION * Day Cab * Adaptive Cruise Control with FCW and AEBS-3 * Lane Change Warning System * Goodyear * Emissions Standard Euro 6 * Automated Transmission, TraXon, 12 gears * Standard Component Arrangement * Fuel Tank on Left * DAF Connect * Warranty Plus Driveline - 3 years - 300,000 km Options * Exterior Sun Visor * LED Headlights, Cornering and Fog Lamps Iedpfx Astv T Aveffotr * Central Locking, 3 Keys, 2 Remote Controls * Lower Step Cabin in Crystal White * Steering Wheel with Silver Accents * Door Trim: Loose Weave Fabric * Driver's Seat: Luxury Air * Armrests on Both Sides of the Driver's Seat * Passenger Seat: Cinema & Table, Fabric Cover * Dashboard Table * Cool Box or Refrigerator * Automatic Climate Control for Cabin * Parking Heater with Waste Heat Pump and Timer * Roof Hatch with Electric Operation * Accessory Power Supply: Standard + 2x 40 A * ECAS Remote with Extended Functions * Toll Preparation * Digital Tachograph, VDO 1C, Version G2V2 * Speed Limiter Setting: 90 km/h * DAF Infotainment Luxury Plus, Luxury Speakers * Antennas: DAB-Prep. Radio, 2x Mobile, GNSS Extra: CB * Wireless Charger * Reversing Warning System * Front: 8.00 t, Air Suspension, 161 N * Front Air Suspension: Medium * F1, 315/70R22.5 GO KMAXS2 156/150 L Steering CBB * R1, 315/70R22.5 GO KMAXD2 154/150 L Traction CBA * R2, 315/70R22.5 GO KMAXS2 156/150 L Steering CBB * MX-11 Engine, 330 kW/449 HP, Cab Emblem: 450 * 12-Speed TraXon Transmission 12TX2210 DD, 16.69-1.00 * Rear Axle Ratio 2.47 * Mechanical Differential Lock * MX Engine Brake * Parking Brake Assistant * Wheelbase 4.60 m / Rear Overhang 2.55 m * Longitudinal Members 260/7.0 mm, Continuous Inner Reinforcement * 545-l Aluminum Fuel Tank Left, Height 620 mm * Use with Drawbar, Type Plate, up to Max Gross Vehicle Weight * Crossmember D137 + Rockinger Coupling D130 * Pneumatic Coupling for Trailer, Swivel Coupling * Electrical Connection for Trailer, 24 V/15-pin * Hard-wired Body Signals and Warnings * Side Marker Lights * Body Mounting Method BAM 1, Console Type B * Tail Lift Application * Hard-wired Steering Right, No First Right * Alternator 130 A, Batteries 2 x 210 Ah AGM * Battery Energy Monitoring Day Registration 03.12.2025 Payload: 14,390 kg Body: ZIKUN Swing-Board I Body Technical Data: Through-loading length: 7,250 mm Loading length: 7,400 mm Through-loading width: 2,480 mm Rear portal: Loading width inside: 2,480 mm External width: 2,550 mm Through-loading height inside: 2,150 mm Entry height: approx. 1,199 mm Overall height: approx. 3,549 mm Underframe: Stable lightweight construction ZIKUN Flap Swivel Mechanism Fixed Roof Powder-coated in RAL 9010 Pure White Collision protection: Welded steel buffer strips on both sides for impact protection. -- PVC mudguards on rear axle -- Holder for wheel chock + 2 chocks -- Red position lights above tail lift -- Side contour markings in white, rear in red The entire body is sandblasted, primed, and painted or powder coated in one color. Underframe and Superstructure: DAF E1980 WHTE Integrated load securing with CRS system (4 rows) in roof and floor, incl. 4 locking bars with 6 horizontal spring telescopic rods (CRS System Ancra-Jungfalk, Dekra certified to VDI 2700 Code XL). Sliding access step Pallet protection edge left and right. Interior lighting as LED spotlights mounted at the top rear, connected to cab switch. Additional interior lighting as LED spotlights mounted at the rear. Front wall/bumper plate made of aluminum-

Condition: new, Year of construction: 2025, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Isdeg U Uv Rjpfx Affotr Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Condition: used, Year of construction: 1973, Storage location: Nattheim Itjdpsvvkt Ujfx Affer

Condition: new, sheet length: 4.000sheet thickness: 20,0cutting area width: 4000total power requirements: 22weight approx.: 20000messurements (LxWxH): 4850 x 2300 x 2180 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Itedpfx Aoxxd D Uoffsr Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: used, Year of construction: 2010, Capacity: 18000 bottles/h closing heads: 24 pieces Power: approx. 5 kW Water: approx. 200 l/h Compressed air: approx. 2 cbm/h Length: 3,3 m Width: 2,2 m Height: 2,4 m Weight: 3000 kg Formats: 0,33 l; 0,5 l; max. bottle diameter 90 mm Running direction: right - left Material: Stainless steel, wear-resistant plastic Ijdpfxjvcqgbe Affotr Base construction: miniaturized, hygienic machine table in outward beveled design Features: mechanical / pneumatic control device (testing of bow clamping), central lubrication, height adjustment for processing of different bottle heights, rinsing and swelling device, high-pressure injection device, HDE injection nozzle at the discharge table, Discharge table, pusher station

Condition: new, power: 355 kW (482.67 HP), fuel type: diesel, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Options: * Climate package * Front chassis configuration: floor plate * Fixed cab entry * Reversing camera * Grab handle and frame: Black, sidewall: cab colour * LED daytime running lights * Air-suspended cab * Sleeper High Cab * Laminated glass with sun protection film * Central locking, 3 keys, 2 remote controls * Windscreen with sun protection film * Headlights with height adjustment * LED skylights * DAF Corner View * LED headlights, cornering and fog lights * Chassis colour: Anthracite grey * Headlamp surround colour: Crystal White * Bumper colour: Crystal White * Lower cab step Crystal White * Steering wheel with silver accents * Interior trim colour scheme: Luxury * Middle storage compartment * LED interior lighting * Auxiliary heater with heat pump and timer * Roof hatch with electric control * Integrated parking air conditioning * Driver's seat: Luxury Air * Passenger seat: Cinema and table, fabric covering * Door panel: Loosely woven fabric * Xtra Comfort mattress for lower bunk * Upper bunk * Automatic cab climate control * Safety net on both bunks * Curtains with privacy divider * Refrigerator and drawer * Armrests on both sides of the driver's seat * Auxiliary power supply: Standard + 2x 40 A * ECAS remote control with extended functions * Adaptive Cruise Control with FCW and AEBS-3 * Driver Performance Assistant * Wireless charger Itodpjx Dptljfx Affsr * Digital tachograph, VDO 1C, version G2V2 * DAF Infotainment Exclusive prep, luxury speakers * Antennas: DAB-prep radio, 2x mobile phone, GNSS extra: CB * Lane departure warning system * Hill Start Assist * DAF Side and Turn Assist * Electronic Stability Control (VSC) * Speed limit recognition * DAF Drowsiness Detection * Compliant with UN regulations R155 and R156 * Alcohol interlock preparation * Reversing warning system * Rear axle load capacity 13.00 t * Load limiter 11.5 t * Manual control for lift device * Lift device * Rear: 20.00 t, air suspension, SR1344 * Front axle 1, 8,000 kg, load index 156 * Rear axle 1, 11,600 kg, load index 145 * Rear axle 2, 7,500 kg, load index 154 * Front: 8.00 t, air suspension, 161 N * Tire pressure monitoring system * Steel disc wheels, silver grey * F1, 315/70R22.5 GO KMAXS2 156/150 L Steering CBB * R1, 315/70R22.5 GO KMAXD2 154/150 L Traction CBA * R2, 315/70R22.5 GO KMAXS2 156/150 L Steering CBB * Emissions standard Euro 6 * Eco-Fuel * Idle shutdown automatic, 5 minutes * Automated transmission, TraXon, 12-speed * Traction control (ASR) * Urge-to-move function * Rear axle ratio 2.38 * Mechanical differential lock * 12-speed TraXon gearbox 12TX2210 DD, 16.69-1.00 * MX-13 engine, 355 kW/483 hp, cab emblem: 480 * 2-cylinder compressor without clutch * Driven rear axle with disc brakes * Pneumatic control for parking brake * ZF Intarder * Front underrun protection * Wheelbase 4.80 m / rear overhang 2.70 m * LED tail lights * EAS unit right, horizontal tank + 75 l AdBlue tank left * Longitudinal members 310/7.0 mm, with front/rear reinforcements * 620 l aluminium fuel tank left, height 620 mm * Suited for drawbar operation, type plate, up to max. GVW * Pneumatic connection for trailer, turntable coupling * Crossmember D137 + Ringfeder coupling D137 * Electrical connection for trailer, 24 V/15-pin * Side marker lights * Battery energy monitoring * Alternator 150 A, batteries 2 x 210 Ah AGM * Warranty Plus Driveline - 3 years - 300,000 km Body:

Condition: new, sheet length: 3.200sheet thickness: 6,0cutting area width: 3200total power requirements: 7,5weight approx.: 5100messurements (LxWxH): 3800 x 1750 x 1700 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Itodpfxevap Tus Affsr Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: new, power: 270 kW (367.10 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, STANDARD SPECIFICATION * Day Cab * Mechanical cab suspension * Passenger seat: cinema style with fabric upholstery * Adaptive cruise control with FCW and AEBS-3 * Lane departure warning system Iodpfx Asr Sn Nnoffstr * Goodyear * Emissions standard Euro 6 * Automated gearbox, TraXon, 12 speeds * Standard component arrangement * Fuel tank on the left * PACCAR Connect * Plus Driveline Warranty - 3 years/500,000 km Options * LED headlights with cornering and fog lights * Windscreen with sun protection film * Central locking, 3 keys, 2 remote controls * Adjustable roof spoiler for Day Cab * Black mirror housings * Roof spoiler in cab color * Headlight bezel color: cab color * Bumper color: cab color * Steering wheel with silver accents * Door trim: loosely woven fabric * Driver's seat: Luxury Air * Armrest for driver's seat * Dashboard table * Cool box or refrigerator * Automatic cab climate control * Auxiliary heater with heat pump and timer * Roof hatch with electric control * ECAS remote control with extended functions * Toll system preparation * Digital tachograph, VDO 1C, version G2V2 * Cruise control setting: 90 km/h * DAF Infotainment Luxury Plus, luxury speakers * Wireless charger * Reversing warning system * Front axle: 8.00 t, air suspension, 161 N * Front air suspension: medium * F1, 315/70R22.5 GO KMAX S2 156/150 L Steering CBB * R1, 315/70R22.5 GO KMAX D2 154/150 L Traction CBA * MX-11 engine, 270 kW / 367 hp cab emblem: 370 * 12-speed TraXon gearbox 12TX2010 DD, 16.69-1.00 * Rear axle ratio 2.47 * Mechanical differential lock * MX engine brake * Parking brake assist * Wheelbase 5.10 m / rear overhang 2.75 m * Longitudinal frame 260/7.0 mm, continuous internal reinforcement * Use with drawbar, type plate, up to max. gross combination weight * Cross member D137 + Rockinger coupling D130 * Pneumatic connection for trailer, rotary coupling * Electrical connection for trailer, 24 V/15-pin * Tail lift application Day registration from 03.12.2025 Superstructure: ZIKUN Swing-Board I body Through-loading length: 6,650 mm Loading length: 6,800 mm Clear portal: 2,480 mm Internal loading width: 2,480 mm External width: 2,550 mm Internal through-loading height: 2,100 mm Loading height: approx. 1,177 mm Overall height unladen: approx. 3,479 mm Subframe: robust lightweight construction made of pressed steel sheets Bulkhead: made of special automotive-grade plastic panels, closed up to the roof, with a central strut, flush fitted Side walls: ZIKUN folding swing mechanism Roof: fixed roof consisting of steel spars with permanently bonded aluminum sheets, powder-coated in RAL 9010 pure white Bumper protection: welded steel anti-collision strips on both sides as bumpers PVC mudguards on the rear axle 1 set of mudflaps for same Holder for wheel chock + 2 chocks Red position lights above the tailgate Side contour markings in white, rear in red Anti-spray mats in the rear mudguards Painting: The entire bodywork is sandblasted, primed and painted in a single color or powder-coated. Subframe and body: DAF W9815WHTE Integrated load securing with CRS system (4 rows) in roof and floor, incl. 4 locking bars with 6 horizontal spring-loaded telescopic rods (CRS system by Ancra-Jungfalk, Dekra certified according to VDI 2700 Code XL) Sliding step on each side, 2 sliding steps in the lower section of the folding wall left and right, approx. 600 mm long Pallet stop edge left and right Interior lighting as LED spotlight mounted at rear at the top, with cab switch

Condition: new, sheet length: 3.200sheet thickness: 6,0cutting area width: 3200total power requirements: 7,5weight approx.: 8500messurements (LxWxH): 4650 x 1700 x 1800 Itsdpfxsd Ab Hho Affor Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: new, sheet length: 4.200sheet thickness: 13,0cutting area width: 4200total power requirements: 18,5weight approx.: 13800messurements (LxWxH): 4650 x 2270 x 2000 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Iedpfod Ab Hiex Affjtr Sequence repeat function • Auto-cutting (Flying cut)

Condition: new, sheet length: 4120sheet thickness: 6,0total power requirements: 11weight approx.: 8000messurements (LxWxH): 4890x2750x1820 Itodpfsd Eqrgox Affsr