Used Swing Out Arm for sale (13,425)

Condition: excellent (used), Hydraulic Swing Arm Punch Press Manufacturer: Pedersen Ledpfx Asx A Hwloffjta Stock no.: 3751 Model: 273 M * Pressing force: 20 tons * Stroke: 150 mm * Throat depth: mm * Table size: 1020x505 mm * Punch size: 760x530 mm * Motor power: kW * Weight: approx. 650 kg

Condition: excellent (used), Here we offer a Bosch swivel arm robot SCARA SR8 with control unit. Bosch swivel arm robot SCARA SR8 Control unit Type: SCARA SR8 Condition: pre-owned / used Scope of delivery: (See image) Ltedpfxjdyaibs Affea (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you. Written order possible by email or fax

Condition: repair required (used), Machine number: 63882 Type / Model: 8LES pressing force: 22 t table: 900 x 450 mm punch width: 350 mm Installation height without / with support plate: mm Ltsdpogd R Sgefx Affea Stroke: 8 to 150 mm Condition: Disassembled, needs to be assembled, not tested The cylinder holder of the machine was broken. Spare part was made - see also pictures. Price as-is, price after assembly on request.

Condition: used, functionality: fully functional, Swing-arm punching machine Universally applicable swing-arm punching machine, notable for the following features: Quick and easy tool setup Infinitely adjustable return stroke Frame made from robust steel construction User-friendly arrangement of controls Safe electric two-hand operation Stroke counter Technical details Type: 1028C Punching force: 200 kN Table width: 1,000 mm Table depth: 500 mm Ltsdpow Rb Amefx Affea Swing-arm size: 550 x 550 mm Stroke: 8 – 80 mm Motor output: 2.2 kW / 400 V / 50 Hz Oil requirement (ISO VG 46): approx. 60 L Dimensions: 1,000 x 950 mm Weight: 1,140 kg

Condition: new, carrying capacity 3,0 t number of suction cups 8 suction cup dia. -- Year of construction 2017 - NEW - exhibition machine In contrast to most vacuum systems / lifting systems, the SOLIDswing constructed so that the recorded disk always remains vertical when it is recorded vertically. The plate can without precise positioning of the Suction cups are accommodated and this is independent of the balance Way of working much faster and safer than with conventional manual ones Lsdpfx Astv Rhcsffsta Vacuum systems.

Condition: good (used), Year of construction: 2008, Industrial robot Manufacturer: Kuka Model: KR150-2 Swingarm Carbon Year of manufacture: 2008 Weight: 1267 kg Kuka Controller: KRC2ed05 Weight: 205 kg Processor: 2 GHz Operating system: WinXP Software version: V5.6.6 Kuka teach pendant: KCP2ed05 Kuka connection cables: 7m/15m Custom design with extended carbon upper arm. This allows axis 3 to swing further to the rear. Lsdpfeq N A Hpsx Affota Originally a KR150-2 Series 2000 from 2008.

Condition: good (used), Load capacity: 50 kg Ljdpfxsh Ri Sve Affota Working length: 7000 mm

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 400 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. Ledpfxsx Itrpo Affjta - Arms are screwed. - Arms adjustable in 200 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 400 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2462.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: Ledpfex Itrcsx Affeta €2265.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2020, Cantilever rack NEW Data : - H : approx. 416 cm - D : approx. 137 cm - L : approx. 402 cm Lsdox Itq Ejpfx Affota - Cantilever arms : approx. 120 cm - Axial dimension : 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm - 2250 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are bolted. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 416 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - incl. all necessary connecting elements and screws. Why BLT cantilever racking ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright foot and upright back are welded together, providing additional safety and short assembly times, as the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 2578,00 € net + statutory value added tax. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Cantilever shelf, double-sided, new goods Data: - H: approx. 400 cm - W: approx. 256 cm - L: approx. 18.45 linear meters - Cantilever arms: approx. 120 cm - Axle dimension: approx. 131 cm - New goods from the factory - Double-sided - 500 kg load per arm - 2250 kg load per stand - Stands in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 200 mm increments. - Levels: base + 4 storage levels (5 storage levels) - Delivery time approx. 4 weeks Shelf consists of: - 015 x stands, double-sided, including base approx. 400cm made of IPE160. Ltjdpfx Asx Dkr Aoffea - 120 x cantilever arms approx. 120 cm made of IPE 80, without deflectors - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load capacities of the shelf uprights and cantilever arms can be statically verified, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Brackets made of angle steel, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €12,450.00 net plus statutory VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand - Stands in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. Ltedpfx Aox Dkrpjffea - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2404.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you realize your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Lsdpfjx Dkq Sex Affjta Data: - H: approx. 350 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 350 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2356.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 350 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 350 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee Ltodpfxjx Dkq Eo Affsa - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2356.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: Ledpfxox Dkqro Affsta - H: approx. 416 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 416 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2631.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Our recommendation: Tell us what you need... We will be happy to help you realize your projects, from planning to ordering to installation. Delivery is possible on request at a reasonable price.

Condition: used, machine/vehicle number: YS2P4X2000208xxxx, mileage: 250,000 km, Year of construction: 2012, Please contact ATS Norway for more information Please provide reference number upon request: 21382 Specifications: - 2012 model - EU approved until 17.10.2026 - Km: approx. 250,000 - Euro 5 - 4x2 - 280 hp - Wheelbase: 430 cm - Winter approved tires (see pictures) - New two-year inspection on printer - Automatic - Radio/DAB - Ready for delivery Ledpfjxfgb Nsx Affjta Description: 2012 Scania P280 4x2 lift dumper that has recently been EU approved. The printer has also been checked and approved. Ready for delivery. Km: 250000 HK: 280 Technical approved: Yes EU-approved until: 17.10.2026 Own weight: 10940 Total Weight: 21500 Payload: 10485 Width: 255 Length: 730 Euro: 5 Model: P280 Gearbox: Automatic

Condition: used, Year of construction: 2000, sheet length: 4.100sheet thickness: 12total power requirements: 30weight approx.: 16300messurements (LxWxH): 5350 x 2250 x 2250back gauge: 1000New Price: approx. 100,000 EURO Condition: Used, very good condition Equipment: - Swing cut execution - NC preset control ELGO for rear gauge - Motorized rear gauge up to 1,000 mm on ball screw spindles, foldable - Clearly arranged control panel mounted on a swivel arm - Hydraulic hold-downs positioned close to the cutting edge - Footswitch Ljdpfewiatvjx Affsta - Central manual cutting gap adjustment Accessories: - 1 side fence 1,500 mm with scale, T-slot, and tilting bolt - 2 sheet metal support arms 1,000 mm with T-slot - Easy replacement and resharpening of the blades - Adjustable cutting length for efficient processing - Lower blade 4-fold reversible - Upper blade 2-fold reversible Additional Details: - Operating manual in GERMAN - Machine and equipment comply with CE regulations

Condition: ready for operation (used), Year of construction: 2022, Main Drive Number of axis 6 Ltedpfxjx Nr H Ue Affea Media Power consumption 1.2 kVA This 6-axis FANUC LR Mate 200 iD 14L robot arm was manufactured in 2022. It features a lightweight controller at 40 kg, operates on 200-230 V~ AC, and is designed for single-phase power with a consumption of 1.2 kVA. It meets CE, EMC, and EN55011 (Group 1, Class A) safety certifications. Consider the opportunity to buy this FANUC LR Mate 200 iD 14L robot arm. Contact us for more information about this machine. Application Types Robotics

Condition: used, Year of construction: 1973, Storage location: Nattheim Ltsdjvvkt Uepfx Affoa

Condition: good (used), Atom SE 25 Hydraulic Arm Press This machine is in perfect condition and ready to operate. It is ideal for die-cutting difficult materials, particularly in the leather goods and printing industries. It can be used with both leather goods and bookbinding dies. It cuts paper, cardboard, leather, plastic, etc. Pressure: 25 tons Power: 380V Table dimensions: 1000mm x 500mm Hammer dimensions: 500mm Maximum stroke: 90mm Motor power: 0.9kW Ltjdpfxsx Nc Ago Affja Weight: 1030kg Two-handed control.

Condition: used, machine/vehicle number: W1T9642411045xxxx, mileage: 218,000 km, Year of construction: 2020, Please contact ATS Norway for more information Please provide reference number upon request: 22097 Specifications: EU approved until 06.08.2026 Mileage: approx. 218,000 km (may increase) Transmission: Automatic Suspension: steel front, air rear Retarder Euro 6, 530 hp Good tires Steering on 4th axle JOAB body 24T hook with articulated arm Remote control Wheelbase: 340 cm Air horns Extra lights Bunk Radio/CD Climate control / AC Video available Delivery by agreement Description: 2020 Mercedes tridem hook truck.Container can be included at an additional cost.24T JOAB hook with articulated arm and remote control. Ledpfx Aox Nl I Esffeta Km: 218000 HK: 530 Technical approved: Yes EU-approved until: 06.08.2026 Own weight: 14200 Total Weight: 35500 Payload: 21225 Width: 254 Length: 887 Euro: 6 Model: 2020 Mercedes Arocs 3253 Tridem Krokbil Gearbox: Automatic

Condition: ready for operation (used), Year of construction: 2018, General Data Machine weight 28900 kg Main Drive Ltjdpfxox I S Sbo Affja Number of axis 6 This 6-axis Universal Robots ur10 cb3.1 was manufactured in 2018, featuring a payload capacity of 10 kg and a reach of 1300 mm. It includes a control cabinet with dimensions 475x423x268 mm, supports TCP/IP communication, and operates with a power consumption of approximately 350 W. Ideal for tasks requiring precision and flexibility. Contact us for more information about this machine. Application Types Robotics

Condition: used, machine/vehicle number: YV2ASW0C88A65xxxx, mileage: 652,000 km, Year of construction: 2008, Please contact ATS Norway for more information Please provide reference number upon request: 20301 Specifications: Km: Approx. 652,000 Transmission: Automatic Air suspension Engine brake JOAB on construction 20T hook Ltedpfx Afowi R D Ejfja Trailer hitch VBG Euro 4 Tires (see pictures) Hydraulic underrun barrier Grill Extra light Rotor beam 2 years Radio/CD Air conditioning/AC Maintenance done by owner Ready for delivery Description:Volvo FH480 Hook truck from 2008.The truck is EU approved and ready for delivery.Sold without box. Km: 652000 HK: 480 Technical approved: Yes EU-approved until: 24.03.2026 Own weight: 12960 Total Weight: 27000 Payload: 13965 Width: 255 Length: 880 Euro: 4 Model: FH480 Krokbil Gearbox: Automatic

Condition: used, machine/vehicle number: WMA21SZZ5DW17xxxx, mileage: 300,000 km, Year of construction: 2012, Please contact ATS Norway for more information Please provide reference number upon request: 22086 Lsdpfxex I U Tns Affjta Specifications: 2011 model EU-approved until: 30.11.25 Not EU-approved Mileage: approx. 300,000 km Faults and deficiencies 6x2 Euro 5 441 hp Automatic transmission Tires (see pictures) Machinery bed and tipping box available for an additional price 20T Hiab hook Air conditioning Lights Extra lights Radio Ready for delivery Description: We have a 2012 Man TGS 26.440 6x2 hook truck with a 20T Hiab hook that is not EU-approved for sale. The vehicle has faults and deficiencies, and some additional costs should be expected. A machinery bed and tipping box can be included for an additional price. Ready for delivery. Km: 300000 HK: 440 Technical approved: no EU-approved until: 30.11.2025 Own weight: 11150 Total Weight: 28000 Payload: 16775 Width: 255 Length: 844 Kw: 324 Euro: 5 Model: TGS 26.440 Gearbox: Automatic

Condition: used, machine/vehicle number: YS2R6X4000128xxxx, mileage: 695,000 km, Year of construction: 2003, Please contact ATS Norway for more information Please provide reference number upon request: 21167 Specifications: EU approved until: 16.06.2026 Model year: 2003 Mileage: approx. 695,000 km All-steel construction Automatic transmission Tires (see pictures) AJK hook-lift Length: 830 cm Width: 255 cm  Wheelbase: 450 / 136 cm Curb weight: 12,800 kg Driveline: 6x4 Power: 579 hp Toolbox Beacon bar Tow hitch Dent on top of the cab (visible in pictures) Bed Radio/CD Air conditioning Description:2003 Scania R164 580 tandem tipper truck with steel suspension and AJK hook-lift. Recently passed EU inspection, including brake upgrades. Ready for delivery. Km: 695000 HK: 579 Technical approved: Yes EU-approved until: 16.06.2026 Own weight: 12800 Total Weight: 29000 Payload: 16125 Ltsdpow Sc Iyefx Affsa Width: 255 Length: 830 Euro: 3 Model: 2003 Scania R164 6x4 Krokbil. Eu-godkjent til 06.2026 Gearbox: Automatic